TSLA Cycle Timing - 122-Day Reversal Map (Adaptive Framework)This indicator is a timing map built specifically for Tesla (TSLA) on the Daily chart. It plots a repeating set of vertical, color-coded timing markers inside a 122-bar cycle (commonly treated as ~122 trading days on the Daily timeframe). These markers highlight reversal “zones”—areas where TSLA has historically shown a tendency to pivot from high-to-low and low-to-high within the cycle.
The script includes:
23 TSLA-derived set points (Points 1–23): the core timing map used to mark the most repeatable reversal areas.
Two optional “Inversion Points” (INV A / INV B): manual markers you can enable when TSLA’s high/low sequence appears to flip due to a structural deviation.
One additional optional marker (OPT C) for user customization.
This is not an auto-buy/sell system. It is a cycle-structure framework designed to help you anticipate when a reversal is more likely to occur, so you can combine it with your own confirmation tools (price action, trend context, support/resistance, volume, etc.).
Definitions (How this script interprets highs/lows)
In the context of cycle mapping:
A High Point is the highest price reached between two neighboring high pivots.
A Low Point is the lowest price reached between two neighboring low pivots.
The vertical lines are timing markers, not “guaranteed pivot candles.” Price may top/bottom slightly before or after a line. That’s why the script includes an optional ± window (in bars) to visualize a small tolerance zone around each marker.
How it works (Conceptually)
The script defines a repeating cycle length (default 122 bars).
Inside each cycle, each point has an offset measured in bars from the cycle start.
For every cycle instance (past, current, and optional future cycles), the script draws:
a vertical dotted line at each enabled point offset
optional ± window bands around the line
optional labels (numbers for set points and “INV” labels for inversion points)
Because this is a Tesla-specific map, the default offsets for Points 1–23 are preconfigured based on TSLA’s observed structure, and the remaining optional points are user-controlled.
How to Use (Important)
1) Use the Daily chart first
This model is designed around TSLA’s Daily cycle behavior. Start with:
Symbol: TSLA
Timeframe: 1D
If you use other timeframes, the cycle “tempo” can change and may require different offsets.
2) Identify the cycle start (anchor)
Cycle mapping depends on where the current cycle is anchored.
Use “Bars Back to Current Cycle Start” to shift the cycle start so that the script’s point sequence aligns with your most recent known cycle beginning. Once aligned, the points should repeat near each 122-bar interval.
3) Read the vertical markers as reversal zones
The colored vertical lines represent areas where reversals have historically occurred, not a promise that price must reverse exactly on the line.
A practical approach:
Use the marker as a “heads-up” zone
Wait for confirmation (trend break, candle structure, momentum shift, key level reaction, etc.)
4) Understand “set points” vs “Inversion Points”
Set Points (1–23)
These are the primary TSLA reversal zones that tend to recur within the 122-bar structure. Specific numbered points often appear near the same relative position inside each cycle.
Inversion Points (INV A / INV B)
Occasionally, TSLA’s cycle behavior can flip—meaning the expected high-to-low (or low-to-high) progression temporarily swaps order. This is what I refer to as an inversion.
When you see a cycle behaving “backwards” relative to the usual sequence:
Enable INV A and/or INV B
Place their offsets at the bar locations where the flip becomes obvious
Use these markers as manual annotations so your cycle notes stay consistent even when TSLA deviates from its typical rhythm
These inversion markers do not force the script to predict a flip—they allow you to document it cleanly.
5) Use the ± Window Bands to manage real-world variance
Markets don’t pivot on perfect timestamps. If a reversal tends to happen “around” a point:
Enable ± Window Bands
Set Window ± Bars (commonly 1–3 bars on 1D)
This gives a realistic visual tolerance zone around each timing marker.
Settings Guide (Practical)
Cycle Length (bars): 122 (TSLA Daily baseline)
Lookback Bars: increase to study more history, decrease for performance
Future Cycles: use sparingly; future markers are guidance zones, not guarantees
Past Cycles: Lines Only: recommended ON for stable performance
Labels at Top: helps keep the chart clean and readable
Final Notes / Limitations
This is a historical timing framework designed to map TSLA’s repeating reversal structure. It helps estimate when reversal pressure tends to appear, but it does not replace risk management or confirmation. Cycle behavior can stretch, compress, or invert during unusual volatility regimes—hence the inclusion of optional inversion markers.
经济周期
Bharat Jhunjhunwala - Distribution Day TrackerOverview
The Distribution Day Tracker is a technical analysis tool designed to automate the identification and tracking of institutional selling pressure, specifically for major market indices (e.g., Nifty 50, S&P 500). While the concept of "Distribution Days" is a cornerstone of CAN SLIM methodology, this script provides a unique, automated lifecycle management system for these signals, ensuring traders act on current data rather than expired warnings.
How It Works (Technical Logic)
This script does not just flag a price drop; it uses a multi-step conditional logic to maintain a "living count" of market weakness:
Detection Engine: A Distribution Day is triggered only when two conditions are met simultaneously:
The index closes at least 0.2% lower (configurable) than the previous session.
The volume is strictly higher than the previous session's volume.
Lifecycle Management (Originality): Unlike basic scanners, this script manages the "expiration" of signals automatically using two proprietary rules:
Time Decay: Signals are automatically removed from the count after 25 trading sessions (approx. one calendar month).
Price Negation: If the index rallies 5% above the specific close price of a distribution day, that specific day is invalidated and removed from the count.
Data Persistence: The script utilizes Pine Script® Arrays (array.new_int(), array.new_float()) to store and track the bar index and price of every valid distribution day in the lookback period, ensuring the count is accurate even as old days expire.
Key Features & Originality
Dynamic Dashboard: A real-time table that translates the raw count into actionable market statuses (e.g., "Healthy Uptrend" vs. "Trim Positions") based on institutional accumulation/distribution clusters.
Rally Negation Levels: The script identifies and displays the specific price level required to "negate" the nearest distribution day, providing a clear target for trend reversal.
Zero Repainting: All calculations are performed on closed bars. The 'D' labels and dashboard counts are final and do not shift after the bar closes.
How to Use
Monitor the Count:
0-3 Days: Market is in a confirmed uptrend.
4-5 Days: Exercise caution; institutional selling is increasing.
6+ Days: High probability of a market top or significant correction.
Adjusting for Volatility: Use the "Percent Loss Threshold" input to adapt the script for different assets. While 0.2% is standard for indices, 0.5% or 1.0% may be more appropriate for individual volatile stocks.
Visual Cues: Look for the "D" markers above price bars to identify exactly where the institutional selling occurred.
MagicDust UwUDynamic Lunar Marker Placement (based on sphere-specific reaction):
Precious Metals: NM below bar (bullish), FM above bar (bearish)
Stocks/Indices: NM below bar (bullish), FM above bar (bearish)
Crypto: INVERTED - NM above bar (bearish), FM below bar (bullish)
Agriculture: NM below bar (bullish), FM above bar (bearish)
Energy: NM below bar (bullish), FM above bar (bearish)
Industrial Metals: Both above bar (neutral - economic data dominant)
Forex: Both above bar (neutral - low lunar sensitivity)
Bonds: Both above bar (neutral - minimal lunar effect)
NM = NEW MOON / FM = FULL MOON
Liquidity TrailsLiquidity Trails
A Volatility-Anchored Market Expectation & Risk Mapping Tool
Have you ever been stopped out by normal market noise?
Have you noticed price reacting around “invisible boundaries” that aren’t obvious on a naked chart?
Liquidity Trails was designed to address exactly that problem — by mapping statistical daily price expectations using fixed higher-timeframe volatility data.
This indicator does not predict direction.
Instead, it helps traders understand where price is statistically expected to travel within a given session or period, allowing for more informed risk placement and expectation management.
📌 Core Features
1️⃣ Fixed Timeframe Volatility Anchoring
All calculations are derived from a user-selected anchor timeframe (Daily, Weekly, Monthly, or custom), ensuring that levels remain stable and unchanged when switching chart timeframes.
This prevents intraday recalculation noise and keeps reference levels consistent throughout the anchor period.
2️⃣ Average Daily Range (ADR) Projection
The indicator calculates ADR based on historical price ranges and projects:
Estimated upper expansion level
Estimated lower expansion level
These levels represent statistical price boundaries, not support or resistance claims.
3️⃣ ATR Context Levels
Average True Range (ATR) bands are plotted from the same anchor timeframe to provide context for volatility expansion vs contraction.
This allows traders to visually assess whether price is operating within, near, or beyond typical volatility conditions.
4️⃣ Volatility-Adjusted Stop Reference Levels
Optional stop reference levels are plotted at a configurable percentage of ADR (default: 60%), helping traders evaluate whether their risk placement is:
Too tight (high noise exposure)
Too wide (reduced reward efficiency)
Statistically aligned with market behavior
5️⃣ Timeframe-Independent Visualization
Levels are drawn using step-style plots, ensuring they:
Remain flat for the entire anchor period
Update only when a new anchor candle begins
Do not repaint intraday
🧠 How This Indicator Is Best Used
Liquidity Trails is intended as a context and risk framework, not an entry signal.
It complements:
Structure-based trading
Liquidity sweep models
Mean-reversion or expansion strategies
Discretionary and systematic approaches
Use price action, structure, or your existing strategy for entries — use this tool to define expectations and manage risk.
💡 Suitable For
Intraday traders seeking stable daily reference levels
Swing traders anchoring weekly or monthly volatility
Traders who want objective volatility context without clutter
🔔 Disclaimer
This indicator is a visual analytical tool only.
It does not provide trade signals or financial advice.
All trading decisions and risk management remain the responsibility of the user.
StO Price Action - Luminous Daily RoadmapShort Summary
- Luminous Daily Roadmap (LDR) are special trading days
- Marks entire trading days using background coloring
- Creates a clear daily roadmap directly on the chart
- Designed to stay minimal and non-intrusive
Full Description
Overview
- LDR is a proprietary forex trading schedule
- Dates of major trend reversals or significant market continuations
- Highlights full trading days using background colors
- Improves visual structure and day-to-day orientation
- Focuses purely on time segmentation, not price signals
- Suitable for all markets and timeframes
Daily Marking Logic
- Each trading day is visually marked across all its bars
- Background coloring spans the full session of the day
- Works consistently across intraday and higher timeframes
Year Look Back (YLB)
- YLB defines the starting year for day marking
- Markings are only applied from the selected year onward
- Allows focused analysis on recent or specific years
Visualization
- Background color is fully customizable
- Uses high transparency to avoid hiding price action
Usage
- Useful for session-based and daily analysis
- Supports routine-based trading and journaling
- Enhances visual rhythm of the chart
Notes
- This indicator is purely visual and non-predictive
- No alerts or signals are generated
- Best used as a structural overlay for orientation
- Can be combined with any price action or indicator-based workflow
ICT Power of 3 identify the high-probability Power of 3 pattern by analyzing price behavior rather than just specific times of day. It focuses on how the market builds, traps, and then expands.
1. Accumulation (The Setup)
Logic: The script monitors volatility using the Average True Range (ATR). When volatility drops below its recent average, the script recognizes that orders are being "accumulated."
Visual: A Blue Dotted Box appears. This marks the equilibrium zone where buy and sell side liquidity is being engineered above and below the high/low of the range.
2. Manipulation (The Trap)
Logic: The script looks for a "Sweep." This is defined as price moving outside the blue accumulation box but failing to sustain that move. In the video, this is the "Judas Swing" or false breakout.
Visual: A Red Diamond appears above or below the bar. This signals that the script has detected a liquidity grab—essentially, the market has "tricked" breakout traders into the wrong side of the market.
3. Distribution (The Expansion)
Logic: This is identified through Displacement. The script calculates the average candle body size. When a candle appears that is significantly larger (based on your Displacement Multiplier), it confirms that "Smart Money" has entered the market.
Visual: A Green Triangle appears. This marks the start of the distribution phase, which is the "meat" of the move where you want to be positioned.
Look-back Value V1新增 MA10 與 MA120 的計算、繪圖、表格顯示。
新增 table_pos 參數，可選擇表格顯示位置（top_left, top_right, bottom_left, bottom_right）。
所有 table.cell 改用 具名參數 text_color，避免誤判成 width。
這樣你就能靈活選擇表格位置，並同時觀察 MA5、MA10、MA20、MA60、MA120、MA240 的扣抵分析。
Fixed Price Levels with Zones (1000 / 750 / 500 / 250)idywbdiawunadnaw oidnawidnawodnaw wadaw dawd awdaw
Forex Hammer & Shooting Star ALERTSshooting STAR, Just leave me alone already i dont want to have to do this
Value Area PRO (TPO/Volume Session VAH/VAL/POC) 📌 AP Capital Value Area PRO (TPO / Volume)
AP Capital Value Area PRO is a session-based value area indicator designed for Gold (XAUUSD), NASDAQ (NAS100), and other CFD instruments.
It focuses on where the market has accepted price during the current session and highlights high-probability interaction zones used by professional traders.
Unlike rolling lookback volume profiles, this indicator builds a true session value area and provides actionable signals around VAH, VAL, and POC.
🔹 Core Features
Session-Anchored Value Area
Value Area is built only during the selected session
Resets cleanly at session start
Levels develop during the session and can be extended forward
No repainting or shifting due to lookback changes
TPO or Volume Mode
TPO (Time-at-Price) mode – ideal for CFDs and tick-volume data
Volume mode – uses broker volume if preferred
Same logic, different weighting method
Fixed Price Bin Size
Uses a fixed bin size (e.g. 0.10 for Gold, 0.25–0.50 for NAS100)
Produces cleaner, more realistic VAH/VAL levels
Avoids distorted profiles caused by dynamic bin scaling
VAH / VAL / POC Levels
VAH (Value Area High)
VAL (Value Area Low)
POC (Point of Control) (optional)
Lines can be extended to act as forward reference levels
🔹 Trading Signals & Alerts
Value Re-Entry
Identifies false breakouts where price:
Trades outside value
Then closes back inside
Often seen before strong mean-reversion or continuation moves.
Acceptance
Detects initiative activity using:
Multiple consecutive closes outside value
Filters out weak single-candle breaks
Rejection
Flags strong rejection candles:
Large candle body
Wick outside value
Close back inside the value area
These conditions are especially effective on Gold intraday.
🔹 Optional Profile Histogram
Right-side volume/TPO histogram
Buy/sell imbalance visualization
Fully optional to reduce chart clutter and improve performance
🔹 Best Use Cases
Recommended markets
XAUUSD (Gold)
NAS100 / US100
Other index or metal CFDs
Recommended timeframes
5m, 15m, 30m
Suggested settings
Mode: TPO
Value Area: 70%
Bin size:
Gold: 0.10
NAS100: 0.25 or 0.50
🔹 How Traders Use It
Trade rejections at VAH / VAL
Look for acceptance to confirm trend days
Use re-entries to fade failed breakouts
Combine with trend filters, EMA structure, or session context
⚠️ Disclaimer
This indicator is provided for educational and analytical purposes only and does not constitute financial advice. Always manage risk appropriately.
Session OpensThis Indicator Draws Session open labels for Asia Session-New York Session-London Session with Optional Alerts.
Buy and Sell Signals (Heiken Ashi)This indicator displays Buy And Sell Signals With Alerts based on custom conditions derived from Heiken Ashi candles.
Week High/LowThis indicator plots the Previous Week High and Low as two horizontal dashed lines.
It is designed to appear only on the Daily (D) and Weekly (W) timeframes, ensuring a clean higher-timeframe context without lower-timeframe noise.
The levels are calculated from the completed weekly candle and automatically update at the start of each new week.
These levels serve as weekly liquidity references, commonly used to assess premium/discount zones, potential stop-run areas, and higher-timeframe market reactions.
Chart This in GoldProduces a historical line chart in the bottom pane to reflect how many units of spot gold (XAU) could be exchanged for one unite of the underlying asset.
JSRM NEO 1.00+Educational analysis for reviewing short and long pivots while focussing on the intra bar volatility to gain a specific data function to discern the longevity of the microtrends that are constructing the macro long short trends based on a regression model.
Blockcircle Heikin-Ashi Multi-TimeframeThe BLOCKCIRCLE HEIKIN-ASHI MULTI-TIMEFRAME indicator displays Heikin-Ashi price data across multiple timeframes simultaneously, giving you a clear picture of trend direction from your current chart all the way up to monthly views.
Instead of flipping between charts to check if higher timeframes agree with your trade idea, everything sits right in front of you on a single unified view.
The core concept is simple: when multiple timeframes show the same trend direction, the probability of a successful trade increases. When they disagree, you might want to wait for better alignment or reduce your position size.
WHAT MAKES THIS INDICATOR ORIGINAL AND DIFFERENT
While Heikin-Ashi candles and multi-timeframe analysis are established concepts, this indicator extends beyond simple HA plotting in several ways that justify its protected source status.
First, the summary scoring algorithm calculates a directional score from 0 to 100 that quantifies trend alignment across all enabled timeframes. This is not simply counting bullish versus bearish readings. The score incorporates the current timeframe alongside higher timeframes, weights each contribution, and produces a single metric that represents overall market structure bias.
Second, the indicator includes an intelligent auto-timeframe system that dynamically selects appropriate higher timeframes based on your current chart. Rather than requiring manual configuration, the algorithm maps each chart timeframe to a logical hierarchy of higher timeframes. A 15-minute chart automatically receives 30-minute, 1-hour, 2-hour, 4-hour, and 8-hour references. A daily chart receives 3-day, weekly, 2-week, monthly, and quarterly references. This mapping logic ensures meaningful timeframe relationships regardless of where you trade.
Third, the alignment quality calculation measures how decisive the current trend reading is, regardless of direction. A score where 80 percent of timeframes agree in either direction produces a high alignment quality rating, while a 50/50 split produces low quality. This helps traders distinguish between strong conviction setups and ambiguous market conditions.
Fourth, the stability factor tracks how many timeframes have recently changed direction. Markets where multiple timeframes are actively flipping carry different risk characteristics than markets where all timeframes have maintained their direction for extended periods. The stability calculation converts recent change counts into a percentage that feeds into the overall assessment.
Fifth, the confidence rating system interprets the raw data and translates it into actionable guidance. High confidence requires near-complete alignment across timeframes. Medium confidence requires majority agreement. Low confidence indicates mixed conditions. This interpretation layer helps traders who prefer clear guidance over raw numbers.
These proprietary elements, particularly the auto-timeframe mapping, the multi-factor scoring system, and the stability tracking, represent original development work that extends meaningfully beyond standard Heikin-Ashi MTF implementations available elsewhere.
KEY FEATURES
Multi-Timeframe Heikin-Ashi Display: View up to five higher timeframes plotted directly on your chart alongside the current timeframe
Each timeframe shows both the open and close values as separate lines, with optional fill between them
Heikin-Ashi smoothing filters out market noise better than standard candlesticks, making trend direction easier to identify
All timeframe data updates in real-time as new bars form
Professional Dashboard Panel
Summary score from 0 to 100 that quantifies overall trend alignment at a glance
Individual timeframe breakdown showing exact open and close prices, trend direction, and whether a change just occurred
Statistics section with trend strength percentage, timeframe alignment count, and recent change tracking
Signal status that interprets the data and suggests whether conditions favour buying, selling, or staying neutral
Confidence rating based on how many timeframes agree with each other
Compact mode option for traders who prefer a smaller footprint on their charts
Visual Customisation Options
Three display modes: lines only for a clean look, lines with fill for easier trend visualisation, or cloud style for a more distinct separation between levels
Full colour control for each timeframe so you can match your existing chart theme
Adjustable line widths and optional midline display showing the average of open and close
Background colour shading that changes based on overall trend alignment
Trend change arrows that appear automatically when a timeframe flips direction
Practical Alert System
Individual alerts for each timeframe when it switches from bullish to bearish or vice versa
Combined alert when all enabled timeframes align in the same direction
Single master alert that fires whenever any timeframe changes, useful for staying informed without setting up multiple notifications
Strong trend detection alert when alignment score crosses above key thresholds
HOW TO USE
Setting Up Your Timeframes
Start by choosing timeframes that match your trading style. If you trade the 15-minute chart, enable the 1-hour, 4-hour, and daily timeframes. If you swing trade on the daily, consider the 3-day, weekly, and monthly timeframes.
Give each timeframe a custom label that makes sense to you. The dashboard will display these labels, so use whatever helps you read the information quickly.
You do not need to enable all five timeframes. Many traders find that three or four provide enough context without cluttering the chart.
How to Read the Dashboard
Check the summary row first. A score above 70 with a clear bullish or bearish bias suggests strong alignment. Scores between 40 and 70 indicate mixed conditions where caution is warranted.
Look at the alignment count to see exactly how many timeframes agree. Four out of five being bullish is more convincing than two out of five.
Pay attention to the change indicator, shown as a yellow dot next to any timeframe that just flipped. Recent changes often signal the start of a new move but can also be false signals that reverse quickly.
The confidence rating helps newer traders interpret the data. High confidence means most or all timeframes agree, while low confidence suggests waiting for better conditions.
Identifying Trade Opportunities
The strongest signals occur when all enabled timeframes show the same direction. If you see all green across the board, bullish setups are more likely to succeed. The opposite applies when everything points to bearishness.
When the current timeframe flips to match the higher timeframes, this often marks a good entry point. The lower timeframe is now in agreement with the bigger picture.
Avoid trading against multiple higher timeframes. If the 4-hour, daily, and weekly are all bearish, taking long positions on the 15-minute chart is fighting the overall trend.
Use divergences between timeframes as warning signs. If lower timeframes turn bullish but higher timeframes remain bearish, the rally may be a pullback within a larger downtrend rather than a true reversal.
Managing Risk with Timeframe Analysis
Consider position sizing based on alignment. Full positions when alignment is strong, reduced size when conditions are mixed.
Place stops beyond the higher timeframe structure. If the daily Heikin-Ashi open sits at a certain level, that level often acts as support or resistance.
When higher timeframes start changing direction one by one, this often signals a larger trend shift developing. Take profits or tighten stops on existing positions.
The trend strength percentage gives you a quick read on momentum. Above 80 percent suggests strong conviction in one direction. Below 40 percent suggests the opposite direction dominates.
Combining with Other Analysis
This indicator works well alongside volume analysis. Strong trend alignment with increasing volume adds confidence to the signal.
You can see use the trend change arrows as added confluence towards a trend break as you see below
Support and resistance levels from higher timeframes carry more weight. Use the higher timeframe Heikin-Ashi values as dynamic support and resistance zones.
Combine with momentum oscillators for timing. When the indicator shows alignment and an oscillator shows oversold or overbought conditions, the setup becomes more compelling.
Price action patterns that form in the direction of multi-timeframe alignment have better follow-through than those forming against it.
LIMITATIONS
This indicator uses Heikin-Ashi calculations, which by design lag behind standard price action. Signals confirm trends rather than predict them, and early entries require additional confirmation from other methods.
The auto-timeframe feature selects higher timeframes based on predefined mappings. These mappings work well for most trading styles but may not suit every specific use case. Manual override is available for traders who prefer custom timeframe combinations.
During extended consolidation periods, the summary score may oscillate around 50 percent and produce mixed readings. The indicator performs best when markets exhibit clear directional movement.
Multi-timeframe alignment does not guarantee trade success. Markets can and do reverse even when multiple timeframes agree. Proper risk management and position sizing remain essential regardless of alignment score.
This indicator should be used as part of a complete trading approach. It provides trend context and alignment analysis but does not replace fundamental analysis, risk management, or trading discipline.
Futures Sizing Calculator (Greg.Trading)📐 Futures Sizing Calculator
by Greg.Trading
🔍 Overview
The Futures Sizing Calculator is a visual risk-management tool built for futures traders who demand precision.
It allows you to define your entry, stop-loss, and maximum dollar risk, then instantly calculates optimal contract sizing—directly on the chart.
No spreadsheets. No mental math. Just clear, actionable risk data.
🎯 What This Indicator Does
This indicator combines trade visualization with dynamic position sizing:
✔ Draws Entry and Stop-Loss levels on the chart
✔ Highlights the risk area between entry and stop
✔ Automatically detects LONG or SHORT direction
✔ Calculates stop distance in points
✔ Determines contract size for multiple futures
✔ Displays exact dollar risk per contract size
✔ Updates instantly as prices change
📊 Supported Contracts
The calculator currently supports the most commonly traded CME micro futures:
MNQ – Micro Nasdaq
MES – Micro S&P 500
MGC – Micro Gold
Each contract is calculated using its true point value for accurate risk sizing.
🧮 How the Calculations Work (Conceptually)
The script uses a fixed-risk position sizing model, commonly used by professional traders:
1️⃣ You define a maximum dollar risk per trade
2️⃣ The script measures the distance between Entry and Stop
3️⃣ That distance is multiplied by each contract’s point value
4️⃣ Contract size is calculated to stay within your risk limit
You are shown two sizing options:
Conservative → rounded down (risk stays below limit)
Aggressive → rounded up (risk slightly exceeds limit)
This lets you choose the exposure that best fits your trading plan.
🧭 Visual Trade Mapping
To improve clarity and execution speed, the indicator provides:
🟩 Green / Red dotted lines for Entry and Stop
📦 A transparent risk box between those levels
🔁 A centered LONG or SHORT label inside the risk area
📌 A floating panel displaying all sizing calculations
Everything is placed where your eyes already are—on the chart.
⚙️ How to Use
Add the indicator to any futures chart
Set your Account Size and Risk Amount
Enter your Entry price
Enter your Stop-Loss price
Review:
Trade direction
Risk box
Contract sizing panel
Adjust entry or stop at any time and the calculations update instantly.
⭐ Why This Indicator Is Different
Unlike basic sizing calculators or static tools, this indicator:
✅ Is fully chart-based
✅ Shows real dollar risk, not estimates
✅ Supports multiple contracts at once
✅ Combines numbers with visual confirmation
✅ Is built for live execution and planning
It’s designed to be used during real trades, not just before them.
⚠️ Important Notes
• This is a risk-management tool, not a trading strategy
• It does not generate buy or sell signals
• Always confirm calculations align with your broker’s specifications
