RSI Bollinger Band and Trend Confidence Gauge█ RSI BB Trend Confidence Gauge (ADX/DMI)
Cross-checks Trend + Momentum + Strength in real time so you focus on VERIFIED conditions.
Most of us have been there: you see a move starting, you jump in, and the market immediately turns into a sideways chop-fest that eats your stop. This is a simple dashboard that forces the market to “prove itself” before you put capital at risk.
█ WHAT MAKES THIS DIFFERENT?
Most indicators are “Yes/No” machines — they fire signals anytime two lines cross, even when the market is weak, noisy, or range-bound. This script is a Quality Filter .
Instead of asking “Is price moving?”, it asks: “Is the move backed by alignment, momentum, and strength?”
VERIFIED only appears when all three agree, helping you avoid low-probability chop and “no-trade” consolidation zones.
█ QUICK START
• UP + VERIFIED + High ➔ “A-Tier” state; favor pullbacks or continuation.
• DOWN + VERIFIED + High ➔ bearish control is real; avoid dip-buying.
• Conflict (gray) ➔ indicators disagree; step aside and wait for alignment.
• R or B markers ➔ overextension warnings; don’t chase into extremes.
█ THE "ANTI-CHOP" ENGINE
Trading is probability, not guessing. This script uses a 3-stage logic gate to verify conditions:
• 1) The Trend (HMA 13/34): Hull Moving Averages provide a fast, smooth regime filter. If fast vs. slow isn’t clean, the regime isn’t ready.
• 2) The Fuel (RSI 50): A trend without momentum is a trap. UP/DOWN only prints when RSI confirms.
• 3) The Proof (ADX/DMI): Final gate. VERIFIED only appears when ADX ≥ 22 and DI+/DI- agrees . If strength isn’t there, stay sidelined.
█ VISUALS YOU'LL ACTUALLY USE
• Live Dashboard: Bottom-center snapshot of RSI, Direction (UP/DOWN/Conflict), VERIFIED status, and Confidence tier (Low/Med/High).
• Exhaustion Markers: Orange icons when price is extended: "R" for RSI extremes and "B" for Bollinger Band hits. These flag caution zones.
• Trend Ribbon: Zero-line bias bar: Lime (bullish), Red (bearish), Gray (conflict/chop risk).
█ SETTINGS
• Action ADX Minimum (default 22): Want stricter verification? Try 25. Want earlier signals? Try 20 (higher noise/risk).
Disclaimer: Educational tool only. Not financial advice. Past performance does not guarantee future results. Always use strict risk management.
震荡指标
End Of MooveINDICATOR: END OF MOOVE (EOM)
1. Overview
The EndOfMoove (EOM) is a specialized volatility analysis tool designed to detect market exhaustion and potential price reversals. By utilizing a modified Williams Vix Fix (WVF) logic, it identifies when fear or selling pressure has reached a statistical extreme relative to recent history.
---
2. Core Logic & Calculation
The script functions by measuring the "synthetic" volatility created during sharp price drops and momentum shifts.
* Williams Vix Fix (WVF) Logic: It calculates the distance between the current low and the highest close over a specific lookback period ( 20 bars by default ). This creates a volatility spike during market bottoms or rapid corrections.
* Dynamic Normalization: The indicator continuously tracks the Historical Maximum of this volatility over a long window ( 250 bars ).
* Statistical Thresholding: It sets a "Danger Zone" at a specific percentage ( 75% ) of that historical maximum to filter out noise and isolate significant exhaustion events.
---
3. Adaptive Intelligence (Detection & Smoothing)
The EOM adapts to different market conditions through its detection engine:
1. Spike Confirmation: To avoid premature entries, the script uses a confirmation window ( 3 bars ). A signal is only "confirmed" if the current volatility spike is the highest within this local window.
2. Variable Smoothing: Traders can apply an internal SMA smoothing to the raw volatility data to filter out erratic price action on lower timeframes.
---
4. Visual Anatomy
The interface uses a high-contrast design to highlight institutional exhaustion:
* The Histogram:
* Faded Gray: Represents standard market volatility. The transparency is dynamic ; it darkens as volatility rises, signaling a buildup in pressure.
* Bright White: Activates when the volatility crosses the Dynamic Threshold , marking a high-probability exhaustion zone.
* The Threshold Line: A continuous horizontal boundary that represents the 75% of historical max , acting as the "Trigger Line."
* Signal Triangles: A small white triangle appears at the top of the indicator when a Volatility Spike is statistically confirmed.
---
5. How to Trade with EndOfMoove
* Spotting Bottoms: Large white columns often coincide with "capitulation" phases. When the histogram reaches these levels, the current downward move is likely overextended.
* Divergence Watch: If price makes a new low but the EOM histogram shows a lower spike than the previous one, it indicates that selling pressure is drying up.
* Volatility Breakouts: A sudden transition from faded gray to bright white suggests an impulse move that is reaching its peak velocity.
---
6. Technical Parameters
* WVF Period: Controls the sensitivity of the raw volatility calculation.
* Historical Max Period: Determines the depth of the statistical database (50 to 500 bars).
* Threshold %: Allows the trader to tighten or loosen the "Extreme" zone (set to 75% for balanced results).
Anchored VWAP PercentageINDICATOR: ANCHORED VWAP PERCENTAGE (AVWAP)
1. Overview
The Anchored VWAP Percentage (AVWAP) is a quantitative momentum and mean-reversion tool. It measures the percentage distance between the current price and a Volume Weighted Average Price (VWAP) that resets automatically based on specific time cycles. It allows traders to identify overextended market conditions relative to institutional value.
---
2. Core Logic & Calculation
The script tracks the relationship between price and volume starting from a specific Anchor Point .
* Volume-Weighted Foundation: Unlike simple moving averages, this indicator uses the VWAP formula: sum(Volume * Price) / sum(Volume) .
* Automatic Anchoring: The starting point (Anchor) resets automatically depending on the chart timeframe (e.g., resets weekly on a 15m chart, or yearly on a Daily chart).
* Percentage Deviation: It calculates the precise gap between the price and the VWAP, plotted as an oscillator: ((Price - VWAP) / VWAP) * 100 .
---
3. Adaptive Intelligence (Multi-Asset & Multi-TF)
The AVWAP is built with an internal database of 85th Percentile (P85) volatility thresholds. It recognizes that different assets have different "stretching" limits:
1. Asset-Specific Calibration: It includes optimized data for Bitcoin, Ethereum, Altcoins, Forex, and Indices .
2. Dynamic Timeframe Mapping: The anchor period and the exhaustion thresholds adjust automatically. For example:
* Intraday (1m-5m): Anchors to an 8-hour (480 min) cycle.
* Mid-Term (15m-60m): Anchors to a Weekly (W) cycle.
* Swing (Daily): Anchors to a Yearly (12M) cycle.
---
4. Visual Anatomy
The indicator is designed for high-speed decision-making:
* The Histogram:
* Green: Price is trading above the VWAP (Bullish premium).
* Red: Price is trading below the VWAP (Bearish discount).
* P85 Threshold Lines:
* These lines represent the 85th percentile of historical deviations . Historically, the price stays within these boundaries 85% of the time.
* Background Highlighting: When the histogram crosses the P85 line, the background glows, signaling a Statistical Exhaustion Zone where a retracement to the mean is highly probable.
---
5. How to Trade with AVWAP
* Mean Reversion: When the histogram reaches the P85 Zone , the price is "statistically overextended." This is a prime area to look for reversals or to take profits on existing trends.
* Trend Strength: If the histogram stays near the Zero Line while the price moves, the trend is supported by healthy volume.
* Value Area: The Zero Line represents the Fair Value . Buying near the Zero Line during a bullish histogram (Green) offers a high-probability entry with low risk.
---
6. Technical Parameters
* Asset Selection: A dropdown to switch between Crypto, Forex, and Indices.
* Color Customization: User-defined colors for bullish and bearish sentiment.
* Precision Control: 4-decimal precision for accurate tracking of thin-margin assets like Forex.
CNE - Efficient Swing Structure + MomentumThe CNE Efficient Swing Structure and Momentum indicator is a sophisticated technical analysis tool designed to quantify the strength and exhaustion of price movements relative to genuine market structure rather than arbitrary time constraints. Unlike traditional oscillators that reset based on a fixed number of candles, this indicator anchors its calculations to confirmed structural pivots. The foundation of the system is a volatility-adaptive swing detection algorithm that utilizes the Average True Range (ATR) to filter out insignificant noise. A trend change is only registered when price retraces against the current direction by a user-defined multiple of the ATR, ensuring that the tool remains locked onto the prevailing trend until a statistically significant reversal occurs. This mechanism allows the trader to view momentum as a cumulative force continuously building from a verified low or high, providing a pure view of the current leg's intensity.
Once a structural anchor is established, the indicator calculates the "Pivot-to-Pivot" momentum, displaying the percent change from the start of the trend to the current price. This creates a zero-based oscillator where the zero line represents the structural origin—the absolute bottom of the current uptrend or the absolute top of the current downtrend. To contextualize this raw data, the script overlays dynamic statistical bands based on standard deviations. These bands function similarly to Bollinger Bands but are applied to the momentum of the swing itself. When the momentum histogram pushes into the outer deviation bands, specifically beyond two standard deviations, it signals that the current move is statistically overextended relative to the asset's recent volatility profile. This helps traders distinguish between a healthy, sustainable trend and a climactic move that is prone to a mean-reversion snapback.
A critical feature of this system is its ability to visualize the "average extension" of market moves, providing an immediate benchmark for trade management and target setting. The indicator plots two distinct sets of lines for both upward extensions and downward drawdowns without relying on heavy historical arrays, ensuring optimal computational efficiency. The first is a solid step-line representing the historical average of all past swings, serving as a long-term baseline for what constitutes a "normal" move. The second is a dotted marker representing a recency-weighted average, heavily biased toward the last five swings. By comparing these two lines, a trader can instantly gauge the changing market regime; if the recent weighted average is expanding away from the historical baseline, volatility is increasing, whereas a contracting recent average suggests the market is entering a period of compression.
Finally, the indicator integrates automated divergence detection based on structural flips rather than simple candle-to-candle comparisons. It records the peak momentum value of every completed trend leg and compares it to the peak of the previous leg in the same direction. If price makes a new structural high but the momentum oscillator fails to surpass the peak of the previous uptrend leg, a bearish divergence is flagged. Conversely, if price pushes to a new structural low with weaker downside momentum than the prior drop, a bullish divergence is highlighted. This combination of volatility-filtered structure, statistical deviation bands, efficiency-optimized extension targets, and structural divergence creates a comprehensive framework for assessing the probability of trend continuation versus reversal.
HaP RSI ComboHaP RSI Combo
Description:
This script is a comprehensive RSI Screener designed to help traders monitor up to 200 symbols simultaneously across 5 different custom lists. It combines two powerful technical strategies: RSI Divergences and RSI Moving Average Crossovers. Instead of switching between charts, you can see all bullish and bearish signals in a single, organized table on your screen.
Key Features:
Mass Scanning:
Supports 5 Custom Lists.
Each list can hold up to 40 symbols.
Total capacity: 200 symbols scanned in real-time.
RSI Divergence Detection:
Detects Regular Bullish (PU) and Hidden Bullish (GPU) divergences.
Detects Regular Bearish (NU) and Hidden Bearish (GNU) divergences.
Fully customizable Pivot Lookback and Range settings to fine-tune sensitivity.
RSI & MA Crossover Strategy:
Scans for RSI crossing above or below a Moving Average.
Supports various MA types: SMA, EMA, SMMA (RMA), WMA, VWMA.
Customizable RSI and MA lengths.
Visual Dashboard:
Displays a clean table on the chart.
Green Column: Shows all Bullish signals (PU, GPU, RSI Buy).
Red Column: Shows all Bearish signals (NU, GNU, RSI Sell).
Adjustable text size and transparency settings.
Abbreviations Used in the Table:
PU: Regular Bullish Divergence (Positive Uyumsuzluk)
GPU: Hidden Bullish Divergence (Gizli Pozitif Uyumsuzluk)
NU: Regular Bearish Divergence (Negatif Uyumsuzluk)
GNU: Hidden Bearish Divergence (Gizli Negatif Uyumsuzluk)
AL/BUY: RSI Crossed Above MA
SAT/SELL: RSI Crossed Below MA
How to Use:
Open the indicator settings.
Select which list group you want to display (List 1, List 2, etc.).
Enter your favorite symbols (tickers) into the corresponding fields manually.
Adjust the timeframe and strategy parameters if needed.
Watch the table for real-time signals.
Note: Due to Pine Script request.security limits, ensure you are not exceeding the execution time limits if you add too many complex calculations, though this script is optimized for performance.
Accumulative Swing Cloud [MarkitTick]💡This indicator presents a modernized hybrid approach to J. Welles Wilder’s classical Accumulative Swing Index (ASI). While the traditional ASI is often viewed as a simple line oscillator used to confirm price breakouts, the Accumulative Swing Cloud reconstructs this concept into a dynamic trend-following system. By smoothing the raw ASI data into multiple moving average layers, this script creates a "Cloud" structure that visualizes the strength, direction, and momentum of the swing index, effectively treating the ASI value itself as a tradeable price action entity.
● Originality and Utility
The standard Accumulative Swing Index is a powerful tool for seeing through the "noise" of open, high, low, and close prices to find the real trend. However, looking at a raw ASI line can be jagged and difficult to interpret for sustained trends. This script innovates by applying "Cloud Dynamics" to the ASI. It calculates three distinct moving averages (Fast, Mid, and Slow) of the ASI value itself. The area between the Fast and Slow averages is filled with a dynamic gradient color. This allows traders to not only see the trend direction (Bullish or Bearish) but also gauge the volatility and strength of the move based on the expansion or contraction of the cloud's width. Additionally, this version introduces an optional Volume Integration feature, allowing the Swing Index calculations to be weighted by relative volume, giving more significance to moves backed by high market participation.
● Methodology and Calculations
The core of this indicator relies on the Swing Index calculation. It compares the current bar's Open, High, Low, and Close against the previous bar's values to derive a variable "R" (a measure of the market's range).
The script determines the largest price movement (K) among the High-Close, Low-Close, and High-Low ranges.
It calculates the "R" value based on the relationship between the daily range and the gap between the prior close and current open.
A Swing Index (SI) value is derived using the Limit Move value (T), the defined Multiplier, and the calculated R and K values.
This SI is accumulated into a running total (ASI State).
If Volume Integration is enabled, the SI is multiplied by a Volume Factor (Current Volume divided by Average Volume), capped at 3.0 to prevent outlier distortion.
● Visual Guide
The indicator plots several key visual elements on the chart:
Cloud Fast (Green Line): Represents the shorter-term moving average of the Accumulative Swing Index.
Cloud Slow (Red Line): Represents the longer-term moving average.
Cloud Fill (Gradient Area): The space between the Fast and Slow lines.
Green Gradient: Indicates the Fast MA is above the Slow MA (Bullish Trend).
Red Gradient: Indicates the Fast MA is below the Slow MA (Bearish Trend).
Gradient Intensity: The opacity of the color scales dynamically based on the width of the cloud relative to its recent historical maximum. A wider cloud (stronger trend/higher volatility) appears more solid, while a narrow cloud appears more transparent.
ASI Line (Color-Coded Line): The thick line represents the current raw Accumulative Swing Index value. It changes color (Green/Red) based on its position relative to the Signal Line.
Signal Line (Gray Line): A Simple Moving Average of the ASI Line, acting as a trigger for immediate reversals.
Bar Coloring: The main price candles are colored to match the current state of the Cloud (Green for Bullish Cloud, Red for Bearish Cloud).
● How to Use
Trend Identification: Use the Cloud color to determine the primary trend. A Green Cloud suggests an uptrending market structure, while a Red Cloud suggests a downtrend.
Entry Signals: Traders often look for the "ASI Line" to cross the "Signal Line" in the direction of the Cloud. For example, if the Cloud is Green, a crossover of the ASI Line above the Signal Line is a bullish confirmation.
Cloud Crossovers: A crossover of the Fast and Slow Cloud lines represents a major structural shift in the Accumulative Swing Index trend.
Volatility Filter: Pay attention to the gradient intensity. A very narrow (transparent) cloud indicates low momentum or consolidation, while a widening (solid) cloud indicates expanding momentum.
● Inputs and Settings
ASI Core Engine: Configure the Daily Limit (T) and Multiplier to tune the sensitivity of the Swing Index calculation.
Volume Integration: Toggle "Weight ASI by Volume" to factor in volume spikes. Adjust "Volume Avg Length" to define the baseline volume.
Cloud Dynamics: Choose the Moving Average type (EMA, SMA, RMA, WMA) and set the Fast, Mid, and Slow lengths to customize the cloud's reactivity.
Visual Enhancements: Toggle "Color Candles by Cloud Width" to apply the gradient coloring directly to the price bars.
● Disclaimer
All provided scripts and indicators are strictly for educational exploration and must not be interpreted as financial advice or a recommendation to execute trades. I expressly disclaim all liability for any financial losses or damages that may result, directly or indirectly, from the reliance on or application of these tools. Market participation carries inherent risk where past performance never guarantees future returns, leaving all investment decisions and due diligence solely at your own discretion.
Momentum Clarity Engine📘 Description - Momentum Clarity Engine
Momentum Clarity Engine (MC-Engine) is a visual momentum-context indicator designed to help traders clearly identify trend direction, momentum strength, and low-quality market conditions using a disciplined combination of MACD and RSI.
Rather than generating buy or sell signals, MC-Engine focuses on clarity and risk control by visually classifying price action into intuitive momentum states and highlighting periods where trading conditions are unfavorable.
🔍 How it works
The indicator combines:
MACD Histogram → momentum direction and strength
RSI → bullish vs bearish pressure balance
Based on this confluence, price candles are colored to reflect market state:
Strong Bullish Momentum → Dark Green (solid)
Weak Bullish Momentum → Light Green (transparent)
Strong Bearish Momentum → Dark Red (solid)
Weak Bearish Momentum → Light Red (transparent)
No-Trade Zone → Muted Orange (high transparency)
Candle opacity dynamically adapts to MACD histogram strength, allowing traders to visually sense when momentum is expanding, weakening, or lacking conviction.
🟠 No-Trade Zone (Key Feature)
The No-Trade zone highlights periods of:
Low momentum
RSI balance / indecision
Choppy or transitional price action
These conditions often result in poor risk-reward.
The muted orange color is intentionally designed to encourage patience and discipline.
✅ How to use MC-Engine
MC-Engine is best used as a trade filter and context tool, not as a standalone strategy.
Common use cases:
Confirming trend strength before entries
Avoiding trades during low-momentum chop
Filtering breakouts and pullbacks
Intraday trading on 1-minute to 15-minute charts
Futures, indices, equities, and crypto markets
Recommended to pair with:
Market structure
Trendlines
VWAP
Support & resistance
Higher-timeframe context
⚠️ Important Notes
This indicator does not provide buy or sell signals
No repainting or future-looking logic
Designed for educational and analytical purposes only
Always apply proper risk management
🧠 Philosophy
The goal is not to trade more —
the goal is to trade when conditions are clear.
Momentum Clarity Engine helps traders participate during strong momentum and stand aside during uncertainty.
Smart Signals [Vdubus]Smart Signals
Concept & Philosophy
Smart Signals is a "Regime-Filtered" oscillator designed to solve the biggest problem with standard indicators: Counter-trend noise.
Most oscillators (like Stochastic or RSI) are "dumb" to market context—they will signal "Sell" continuously during a strong uptrend simply because the price is high. Smart Signals fixes this by first determining the Market Regime (Bullish or Bearish) and then strictly filtering out any signal that contradicts that trend.
It creates a "Tiered" trading system that separates standard trend-following entries from high-probability "Sniper" entries (Hidden Divergence), all presented in a clean, color-blind-friendly visual interface.
Core Functions
1. The "Sheriff" (Trend Filter)
At the heart of the indicator is a heavy, modified Hull Moving Average (HMA 200) that acts as the trend baseline.
Bullish Regime: When the baseline is sloping UP, the indicator enters "Buy Only" mode. All Sell signals are mathematically deleted.
Bearish Regime: When the baseline is sloping DOWN, the indicator enters "Sell Only" mode. All Buy signals are mathematically deleted.
The Math: It uses a custom difference-weighted formula (wmaHalf = Length / 1) to create a stable, chop-resistant trend anchor.
2. Dual-Signal Engine
The indicator scans for two distinct types of entries simultaneously:
♦ Standard Signals (Blue/Red Diamonds):
Logic: A classic Stochastic pullback (Cross 20/80) aligned with the trend.
Use Case: These are frequent "Bread and Butter" trend entries. They are excellent for scaling into a position or adding to a winner as the trend continues.
Location: Plotted at the top (Sell) and bottom (Buy) edges of the panel.
+ Sniper Signals (Gold Crosses):
Logic: Hidden Divergence. The script detects when Price holds structure (Higher Low) while Momentum resets (Lower Low). This is a "Slingshot" setup.
Use Case: These are rare, high-conviction entries. They often mark the end of a complex correction and the resumption of the main trend.
Location: Plotted on the Zero Line to indicate structural strength.
3. Smart Momentum Histogram
The histogram visualizes the "Energy" of the move (MACD 21, 34, 7), but with a twist. It is color-coded to the signal priority:
Gold Bars: A Sniper (Divergence) setup is active.
Solid Blue/Red Bars: A Standard Signal is active.
Faded Blue/Red Bars: The trend is active, but momentum is resetting (waiting mode).
Gray Bars: Counter-trend noise (Ignore).
How to Trade It
Check the "Road": Look at the general color of the histogram columns.
Blue Columns: Look for Longs.
Red Columns: Look for Shorts.
The "Sniper" Entry: Wait for a Gold Cross (+) on the zero line. This is your primary signal to enter a trade with normal risk.
The "Pyramid" Entry: If the trend continues and you see Blue/Red Diamonds (♦) appear at the edges, these are safe places to add to your position.
The Exit: Since this is a trend-following tool, exit when the histogram color flips (e.g., from Blue to Red/Gray), or use your own support/resistance targets.
Alerts Configuration
The indicator comes with a full suite of alerts for automation:
Gold Buy / Gold Sell: Notifies you only for the high-probability Hidden Divergence setups.
Standard Buy / Standard Sell: Notifies you for every trend pullback.
ANY BUY / ANY SELL: A combo alert that triggers on either signal type (useful for simplifying your alert limits).
Accessibility
Color Blind Friendly: The default palette uses High-Contrast Blue (#2962FF) and Soft Red (#FF5252) instead of standard Green/Red, ensuring visibility for all users.
Zero Clutter: No text labels or confusing lines. Just clear, distinct shapes (Diamonds and Crosses) at fixed locations.
Crypto Swing Pro [All-in-One] v2 [R2D2]1. Introduction
Crypto Swing Pro (CSP) is a professional-grade technical analysis suite designed for high-volatility cryptocurrency markets. It consolidates the top five institutional-grade indicators—RSI, EMAs, OBV, MACD, and Bollinger Bands—into a single overlay.
New in v2.0: The script now includes a fully integrated Alert System. You no longer need to stare at the chart all day. You can set the script to email you or ping your phone exactly when a MACD Cross occurs or when Volatility Squeezes, ensuring you never miss a move.
2. Installation
1. Open TradingView: Go to your chart.
2. Open Pine Editor: Click the tab at the bottom of the screen.
3. Paste Code: Delete existing code and paste the v2.0 script above.
4. Save: Name it CSP v2.
5. Add to Chart: Click "Add to Chart".
3. How to Set Up Alerts
This is the most powerful feature of v2.0. You can set alerts for specific conditions without needing to write code.
1. Click the "Alert" Button: Located on the top menu bar of TradingView (looks like an alarm clock).
2. Condition: In the "Condition" dropdown menu, select CSP v2.
3. Select Trigger: A second dropdown will appear. Choose the specific signal you want to track:
MACD Buy Signal: Triggers when MACD crosses bullish.
RSI Oversold (<30): Triggers when price is mathematically cheap.
Volatility Squeeze: Triggers when a big move is imminent.
Price Cross Over 200 EMA: Triggers on major trend reversals.
4. Options: Select "Once Per Bar Close" (Recommended to avoid false signals during the candle fluctuation).
5. Notify: Check "Notify in App" or "Send Email".
6. Create: Click Create. You will now be notified even if you are asleep.
4. The Dashboard (HUD)
The on-screen table gives you an instant "Health Check" of the asset.
Indicator Status Meaning
RSI (14) Green (<30) Oversold. Look for long entries.
Red (>70) Overbought. Look to take profit.
MACD BULLISH Momentum is up.
TREND UPTREND Price is above the 200 EMA (White Line).
VOLATILITY SQUEEZE CRITICAL: Market is coiling. A breakout is coming soon.
VOLUME ACCUMULATION Whales are buying (OBV is rising).
5. Configuration & Visuals
Hover over the indicator name on the chart and click the Settings (Gear) icon.
Toggle Indicators: Uncheck any indicator (like Bollinger Bands or EMA 20) to hide them if you want a cleaner view. The Dashboard will still calculate them in the background.
Dashboard Position: Move the table to any corner or turn it off entirely if it blocks your price view.
Color Themes: Adjust the RSI background colors or EMA colors to fit your chart theme (Light/Dark mode).
6. Best Practices
The "Squeeze" Play: If you get a Volatility Squeeze alert, do not enter immediately. Wait for the price to break out of the Bollinger Bands. The squeeze is the "Get Ready" signal; the breakout is the "Go" signal.
The "Trend" Filter: If the 200 EMA (White Line) is above the price (Downtrend), ignore all "MACD Buy" alerts. Trade with the macro trend, not against it.
Smart Divergence [Reason Edition]Stop trading divergences "in thin air". Start trading structural confluence.
Most divergence indicators fail for one reason: they signal reversals based solely on oscillator math (RSI vs. Price), ignoring the chart's structure. This leads to costly entries against strong trends.
Smart Divergence solves this by applying an Institutional Context Filter. It does not simply alert you of a divergence; it validates the signal against key market structures ("Walls") and—crucially—tells you exactly why the signal appeared directly on the label.
🚀 How It Works: The "Smart Filter" Logic
This script operates on a strict rule: "No Structure, No Signal."
For a Bullish or Bearish divergence to be valid, price must not only diverge from RSI but also physically touch or react to one of four key structural levels:
BB (Bollinger Bands): Rejection due to volatility extension (2.0 StdDev).
KC (Keltner Channels): Rejection due to average range deviation (1.5 ATR).
Pivots (S1/R1): Rejection at standard daily algorithmic levels.
VWAP: Rejection at the institutional average price (Volume Weighted Average Price).
🏷️ Dynamic "Reason" Labels
This is the core feature of this edition. The label on your chart adapts dynamically to show the specific confluence behind the trade.
Examples you will see:
SMART BULL (BB) → The divergence is valid because price hit the Bollinger Band.
SMART BULL (VWAP) → The divergence is valid because price bounced off the VWAP.
SMART BULL (BB VWAP) → High Probability: Price hit the Bollinger Band AND the VWAP simultaneously.
The Logic: The more "Reasons" (acronyms) appear inside the label, the stronger the structural wall, and the higher the probability of a reversal.
🛠️ Settings & Features
🛡️ Smart Filter (Toggle):
ON (Default): Only shows high-quality signals that occur at Support/Resistance zones.
OFF: Shows all raw technical divergences (standard mode).
Alerts Included: Setup custom alerts for "Smart Bull" (Buys) and "Smart Bear" (Sells).
Zero Repainting: Signals are confirmed upon candle close/pivot confirmation.
📋 How to Trade It
Wait for the Label: Do not guess. Wait for the SMART label to appear.
Check the Reason: Look at the text in parenthesis (...).
Single reason (e.g., KC) is a valid setup.
Cluster reasons (e.g., BB S1 VWAP) represent a "Concrete Wall" and are ideal for aggressive entries.
Context: Works best on Intraday timeframes (1m, 5m, 15m) for scalping, and Daily timeframe for Swing Trading bottoms/tops.
Disclaimer: This tool is for educational purposes and technical analysis assistance. Past performance does not guarantee future results. Manage your risk.
Quantum RCI FusionDescription:
Overview: The Quantum Momentum Engine Quantum RCI Fusion is a sophisticated momentum oscillator designed to solve the #1 problem of classic indicators: false signals in sideways markets. At the core of this script is the Rank Correlation Index (RCI), a powerful statistical tool based on Spearman’s correlation. Unlike RSI or Stochastic which only look at price levels, the RCI evaluates the "quality" of a trend by measuring the temporal correlation of price ranks.
This script is not just a line drawing: it is a complete trading ecosystem that fuses three RCI timeframes, volatility filters, and a real-time Risk Management simulation.
🛠 How It Works: The "Fusion" Logic
The strength of this indicator lies in the synergy between its components. It is not a simple mashup, but a filtered logical system:
Triple RCI Engine (Fast, Mid, Slow):
Fast (13) & Mid (18): These generate the Crossover signal for precise entry timing.
Slow (30) - The "Trend Shield": The true innovation. It acts as a directional shield; if the baseline is bullish, the script protects Long positions by ignoring premature exit signals, allowing you to ride the full trend.
HMA Smoothing: Raw price data passes through a Hull Moving Average before the RCI calculation. This drastically reduces market "noise" without sacrificing the responsiveness typical of the RCI.
Intelligent Filters (Anti-Whipsaw):
ADX Integration: Signals are blocked if the ADX is below the threshold (default 20), preventing trading in flat/ranging markets.
Momentum Impulse: Requires a minimum variation (Delta) in the RCI to confirm that the move has real drive and is not just random fluctuation.
🛡 Risk Management & Simulation
Since timing is useless without risk management, Quantum RCI Fusion includes a Dashboard and sophisticated exit logic:
Multiple Exits:
Take Profit / Stop Loss: Based on dynamic ATR multipliers.
Shield Break: Safety exit if the underlying trend (Slow RCI) changes direction.
Emergency: Immediate close if momentum sharply reverses across the zero line.
Live Dashboard: Monitors Win Rate, virtual PnL, and Trade Status (Long/Short/Scanning) in real-time directly on the chart, removing the need for external backtesters.
🚀 How to Use It
Setup: Add the script to a separate pane below your price chart.
Entry Signals:
LONG (Green Triangle): RCI Fast crosses Mid upwards + Oversold Zone (< -80) + ADX > 20 + Bullish Shield.
SHORT (Red Triangle): RCI Fast crosses Mid downwards + Overbought Zone (> 80) + ADX > 20 + Bearish Shield.
Customization:
Scalping: Reduce RCI lengths (e.g., 8/12/20) and disable the "Trend Shield" for quick entries and exits.
Swing Trading: Keep defaults and use the ATR Trailing logic to manage positions on H4 or Daily timeframes.
⚖️ Notes & Credits
Originality: This script enhances the standard RCI by implementing Array-based calculations (optimized for Pine v6), proprietary HMA smoothing, and unique "Trend Shield" logic.
Open Source: The code is released under the MPL 2.0 license. Credits to the Pine community for the foundational mathematical formulas of Spearman's correlation.
Disclaimer: The statistics shown in the dashboard are simulations based on live data and do not guarantee future profits. You are responsible for your own trading decisions.
🖼 Instructions for the Publication Chart (Preview)
To ensure your script gets approved and attracts users, follow these steps for the cover image:
Symbol: Use a volatile and liquid asset, e.g., BTCUSD or XAUUSD (Gold), on a 1H or 4H timeframe.
Clean Layout: Remove all other indicators from the chart (no Moving Averages on price, no Bollinger Bands). The focus must be solely on your script in the bottom pane.
Visualization:
Ensure the Dashboard (stats table) is clearly visible and does not obscure the most recent candle.
The chart should show at least one clear BUY and one clear SELL signal, ideally with the exit icons (the "X" or flags) visible to demonstrate the exit logic.
Vdubus TrixStoch + HMA FilterThe Bottom Indicator: "Vdubus TrixStoch HMA"
Purpose: Precision timing. It shows you exactly when the pullbacks happen.
The Top Indicator: "Vdubus Momentum Lock (Overlay)"
The Trigger Zones (48 / 52):
Buy Zone (Below 48): When the Blue line dips into this zone, the market is "reloading" for a buy.
Sell Zone (Above 52): When the Blue line pops into this zone, the market is "reloading" for a sell.
The Confluence Circles:
Green Dot ("Dip"): Appears only if HMA is Green AND Trix is Rising. This filters out bad buy signals during downtrends.
Red Dot ("Rally"): Appears only if HMA is Red AND Trix is Falling. This filters out bad sell signals during uptrends.
3. The Strategy:
A. Entry Logic (The Sniper)
Trend Check: Is HMA 100 Green or Red?
Momentum Check: Is TRIX 34 agreeing with the HMA?
Trigger:
Buy: Stoch K crosses under 48.
Sell: Stoch K crosses over 52.
Pulse Re-Entry: If Trix momentum was lost briefly but snaps back into alignment, re-enter immediately (even without a Stoch signal).
B. Exit Logic (The Safety)
Momentum Exit: If the TRIX slope flips against you (e.g., you are Long, but Trix turns down), CLOSE IMMEDIATELY.
Hard Deck (HMA Flip): If the HMA line changes color, CLOSE EVERYTHING. This is the emergency brake.
Vdubus Momentum Lock (Overlay)The Top Indicator: "Vdubus Momentum Lock (Overlay)"
The Bottom Indicator: "Vdubus TrixStoch HMA"
Purpose: Precision timing. It shows you exactly when the pullbacks happen.
The Trigger Zones (48 / 52):
Buy Zone (Below 48): When the Blue line dips into this zone, the market is "reloading" for a buy.
Sell Zone (Above 52): When the Blue line pops into this zone, the market is "reloading" for a sell.
The Confluence Circles:
Green Dot ("Dip"): Appears only if HMA is Green AND Trix is Rising. This filters out bad buy signals during downtrends.
Red Dot ("Rally"): Appears only if HMA is Red AND Trix is Falling. This filters out bad sell signals during uptrends.
3. The Strategy:
A. Entry Logic (The Sniper)
Trend Check: Is HMA 100 Green or Red?
Momentum Check: Is TRIX 34 agreeing with the HMA?
Trigger:
Buy: Stoch K crosses under 48.
Sell: Stoch K crosses over 52.
Pulse Re-Entry: If Trix momentum was lost briefly but snaps back into alignment, re-enter immediately (even without a Stoch signal).
B. Exit Logic (The Safety)
Momentum Exit: If the TRIX slope flips against you (e.g., you are Long, but Trix turns down), CLOSE IMMEDIATELY.
Hard Deck (HMA Flip): If the HMA line changes color, CLOSE EVERYTHING. This is the emergency brake.
EMA Slope - RSI Indicator# EMA Slope - RSI Indicator
## Script Description (for Publishing Page)
**EMA Slope - RSI Indicator** combines normalized EMA slope momentum analysis with RSI divergence detection and momentum comparison to create a visual signal indicator with five distinct signal types. The indicator's originality lies in its unique "No Trade Zone" (NTZ) concept applied to slope momentum, combined with centered RSI format for direct comparison, and multiple complementary signal methods that work together to identify both trend-following and reversal opportunities across different market conditions.
**Core Concept - EMA Slope Normalization:** Calculates rate of change of long MA (default 160 EMA) by comparing current value to N bars ago (default 3 bars). Raw slope difference normalized to -100 to +100 scale using 500-bar rolling range: normalizedSlope = 100 * (longMA - longMA ) / (highest(maDF, 500) - lowest(maDF, 500)). Creates consistent momentum oscillator comparable across price levels and timeframes.
**No Trade Zone (NTZ) Logic:** NTZ (±8 default) creates neutral zone where slope momentum is too weak for reliable signals. Indicator only triggers NTZ Cross signals when slope crosses out of threshold zone, ensuring signals occur only when momentum is sufficiently strong.
**Centered RSI Format (RSI-50):** Traditional RSI (0-100 range) difficult to compare with slope. This indicator uses centered RSI = (RSI - 50), creating -50 to +50 range zero-centered on same scale as normalized slope. Enables direct visual and mathematical comparison between RSI and slope momentum, enabling Slope-RSI exhaustion detection and RSI-Slope Oscillator signals.
**Component Integration:** Five signal types target different market conditions. NTZ Cross and Acceleration target trend-following when momentum strong. RSI Divergence and Slope-RSI Divergence target reversals when price/momentum diverge. RSI-Slope Oscillator targets momentum alignment when RSI and slope converge. Multi-method approach provides signals across trending, reversing, and ranging markets.
### 📊 Technical Calculations
**Slope Normalization:** maDF = longMA - longMA , normalized: maDf = 100 * maDF / (highest(maDF, 500) - lowest(maDF, 500)), ranges -100 to +100.
**Acceleration Detection:** maAcce = abs(maDf - maDf ) * smoothBars * 2, normalized: maAcc = 50 * maAcce / highest(maAcce, 200). Values above threshold (35 display, 40 signals) indicate sudden momentum shifts. Visualized as colored circles: cyan (bullish), red (bearish).
**RSI Calculation:** rsi = sma(rsi(source, length), smoothing), centered: cRsi = rsi - 50 (ranges -50 to +50). Smoothed using SMA (default 3 bars) to reduce noise.
**RSI Divergence:** Uses pivot high/low detection on smoothed RSI. Pivot lookback = 16 - sensitivityInput (inverse: sensitivity 6 = 10-bar lookback, sensitivity 10 = 6-bar lookback). Compares price pivots (actual high/low including wicks) against RSI pivots. Bullish: priceLowerLow AND rsiHigherLow. Bearish: priceHigherHigh AND rsiLowerHigh. Stores multiple previous pivots (default 8 max) for comparison.
**Slope-RSI Exhaustion:** Compares normalized slope against centered RSI on same scale. Bearish: slope accelerating up (delta > 0, slope > NTZ) BUT RSI declining (cRsi < cRsi AND cRsi < cRsi ). Bullish: slope accelerating down (delta < 0, slope < -NTZ) BUT RSI rising. Gap threshold (default 10.0 points) filters noise. Visualized with dashed lines and gap labels.
**RSI-Slope Oscillator:** State machine tracks cross events (rsiSlopeCrossUp = cRsi > maDf AND cRsi <= maDf ), waits for confirmation: both RSI and slope heading same direction. Long: RSI crosses above slope AND both heading UP. Short: RSI crosses below slope AND both heading DOWN. Useful for range-bound markets.
**Stretch Filter:** maPercentDiff = (longMA - shortMA) / shortMA * 100. Blocks long signals if longMA > shortMA by threshold (overextended up). Blocks short signals if shortMA > longMA by threshold (overextended down). Default 0.45% prevents signals when MAs too far apart.
**Delta Calculation:** Measures change in normalized slope between bars. Timeframe mode: compares current confirmed slope with previous confirmed (more reliable, slight delay). Standard mode: compares current with previous bar (faster, may use unconfirmed). Minimum threshold (default 3.4) filters weak momentum changes.
**Trailing Stop (Blackflag FTS Swingarm):** Uses Wilder's MA of true range. Modified mode: trueRange = max(HiLo, HRef, LRef) with enhanced gap handling. Unmodified: standard true range. Trailing stop calculated based on ATR factor and price trend direction. Separate settings for divergence signals (wider stops, grace periods).
### 🚀 Signal Types and Conditions
**1. NTZ Cross Signals:** Long: Slope crosses above +NTZ (default +8) AND positive delta ≥ threshold (default 3.4) AND stretch filter allows AND optional trend confirmation (short MA > long MA). Short: Slope crosses below -NTZ AND negative delta ≥ threshold AND filters allow. Exit: Slope re-enters NTZ OR reverses direction for confirmation bars OR trailing stop.
**2. Acceleration Signals:** Long: Acceleration ≥ threshold (default 40) AND slope above NTZ AND positive delta sufficient AND filters allow. Short: Acceleration ≥ threshold AND slope below -NTZ AND negative delta sufficient AND filters allow. Visual: Colored circles (cyan bullish, red bearish). Works independently to catch sudden momentum bursts.
**3. RSI Divergence Signals:** Bullish: Price lower low while smoothed RSI higher low, detected via pivot comparison (default up to 8 pivots). Bearish: Price higher high while RSI lower high. Optional Slope-RSI confirmation. Visual: Purple lines (bearish), lime lines (bullish). Exit: Divergence-specific trailing stop (wider ATR, grace period).
**4. Slope-RSI Divergence Signals:** Bullish: Slope accelerating down (negative delta, slope < -NTZ) BUT RSI rising over lookback AND gap exceeds threshold (default 10.0 points). Bearish: Slope accelerating up (positive delta, slope > NTZ) BUT RSI declining AND gap exceeds threshold. Visual: Orange triangles (bullish exhaustion), yellow triangles (bearish exhaustion) with dashed lines. Exit: Divergence-specific trailing stop.
**5. RSI-Slope Oscillator Signals:** Long: RSI crosses above slope AND both heading upward. Short: RSI crosses below slope AND both heading downward. State machine tracks cross then confirms direction. Exit: Opposite oscillator condition (allows reversal) OR trailing stop after grace period.
### 📖 How to Use
**Adding to Chart:** TradingView → Indicators → Search "EMA Slope - RSI Indicator" → Add (displays in separate pane below price).
**Visual Elements:** Colored area = normalized EMA slope (Green = bullish above NTZ, Red = bearish below -NTZ, Gray = NTZ zone). Blue line = Centered RSI (-50 to +50). Colored circles = Acceleration (Cyan = bullish, Red = bearish). Green triangles (↑) = Long signals (bottom). Red triangles (↓) = Short signals (top). Orange X = Exit signals. Dashed lines = NTZ boundaries. Purple/Lime lines = RSI divergences. Orange/Yellow triangles = Slope-RSI exhaustion. Table (top-right) = Current Slope, RSI, Gap values.
**Parameter Configuration:** MA Settings: Short 40 (stretch filter), Long 160 (slope), Types: SMA/EMA/DEMA/TEMA/WMA/VWMA/SMWMA/SWMA/HMA. Ratios: 20/80 (fast), 40/160 (standard), 50/200 (slow). Core: NTZ Threshold 8 (5-6 more signals, 10-12 stronger), Min Delta 3.4 (5-10 stronger, 1-3 sensitive), Max Stretch 0.45% (0.3% conservative, 1.0% permissive, 0 disable), Use Timeframe Delta true (confirmed bar vs previous bar). RSI: Length 14, Smoothing 3, Source close. Divergence: Sensitivity 6 (higher = more sensitive, 6 = 10-bar lookback, 10 = 6-bar lookback), Max Peaks 8 (2-15 range), Show Divergences true. Slope-RSI: Lookback 4 (2-10, higher = conservative), Min Gap 10.0 pts (0-100, higher = strong only, 0 disable), Show Exhaustion true. Signal Enables: NTZ Cross true, Acceleration true, RSI Divergence false, Slope-RSI Divergence true, RSI-Slope Oscillator true, Require Slope-RSI Confirmation false. Exit: Confirmation Bars 4 (0-10, 0 immediate, 2-4 filters false), Show Trailing Stop true, Trail Type Modified/Unmodified, ATR Period 10, ATR Factor 4.0 (2-3 tight, 4 standard, 5-6 wide), Divergence Grace 3 bars, Divergence ATR 4.0 (recommend 5-8), Oscillator Grace 3 bars, Oscillator ATR 4.0.
**Alerts:** Right-click indicator pane → Add Alert → Choose condition (Long/Short Entry/Exit) → Configure notifications.
**Interpreting Signals:** Trending Markets: Focus NTZ Cross and Acceleration, higher NTZ (10-12) for stronger signals, use trend confirmation. Reversal Opportunities: Enable RSI Divergence and Slope-RSI Divergence, look for exhaustion markers and divergence lines, use wider stops. Range-Bound: Enable RSI-Slope Oscillator, signals when RSI and slope align, allows position reversal. Multi-Timeframe: Higher TF for trend, lower TF for timing, stronger when aligned. Market Adjustments: Crypto 20/80 MA, NTZ 6-7, Delta 4-5 | Forex 40/160 MA, NTZ 8, Delta 3.4 | Stocks 50/200 MA, NTZ 10-12, Delta 2-3.
### 📈 Use Cases
Day Trading (5m-15m, fast MAs 20/80), Swing Trading (1h-4h, standard 40/160), Position Trading (4h-Daily, slow 50/200), Trend Following (NTZ Cross/Acceleration in trends), Reversal Trading (RSI Divergence/Slope-RSI at reversals), Range Trading (RSI-Slope Oscillator in choppy markets), Momentum Analysis (Centered RSI and normalized slope comparison), Trend Exhaustion Detection (Slope-RSI exhaustion markers).
### ⚠️ Important Disclaimer
**THIS IS NOT FINANCIAL ADVICE**
This indicator is for educational and informational purposes only. Trading involves substantial risk of loss and is not suitable for all investors. Past performance does not guarantee future results. No guarantee of accuracy - signals may be false. Not professional financial advice - consult a qualified advisor. Use only as part of comprehensive analysis. Always use proper risk management. Combine with other analysis techniques before making trading decisions. Indicator signals don't guarantee profitable trades. You are solely responsible for trading decisions and risk management. By using this indicator, you acknowledge understanding the risks and that you use it at your own risk. Never invest more than you can afford to lose. Works on all markets: Crypto, Forex, Stocks, Commodities, Futures
## Short Description (for Script Header - 200-300 chars)
Visual signal indicator combining normalized EMA slope momentum (No Trade Zone concept) with centered RSI format for direct comparison. Five signal types: NTZ momentum crosses, acceleration bursts, price-RSI divergences, slope-RSI exhaustion reversals, and RSI-slope oscillator alignment. Includes stretch filter, exit confirmation bars, and trailing stop exits with separate settings per signal type.
## Tags (for Publishing)
EMA, Moving Average, Slope, Momentum, No Trade Zone, NTZ, Indicator, Technical Analysis, RSI, Relative Strength Index, Centered RSI, RSI-50, Divergence, Slope-RSI, Exhaustion, RSI-Slope Oscillator, Normalized Comparison, Stretch Filter, Trend Confirmation, Exit Confirmation, Trailing Stop, Alerts, Signals, Visual Signals, Entry Signals, Exit Signals, Crypto, Forex, Stocks, Futures, Swing Trading, Day Trading, Reversal Trading, Range Trading, Momentum Analysis
## Category
**Indicators** → **Momentum**
Price Action TrendPrice Action Trend measures trend *strength* by modelling where price sits inside a smoothed price-action channel, then applying RSI to that “channel position”. It doesn’t predict, but shows what price is doing now.
This indicator uses the same calculations as my old "Price Action Trend Overlay" script, which I'd published Protected for some forgotten reason. Some users have asked for the source code, so I'm republishing it as open source. I've also tidied up the code a bit, added some visualisations of elements that were present but never drawn, such as the PA channels themselves, drawn the trend metric in a separate pane, added alerts, and made some more configuration options available.
🟩 HIGHLIGHTS
⭐ Trend colouring on the main chart.
⭐ A trend line drawn in its own pane.
⭐ Overbought/oversold markers on the main chart, derived from the same PA calculations.
⭐ Optional “Price Average” line and channel colouring.
🟩 WHAT’S UNIQUE ABOUT THE TREND CALCULATION
Most “trend RSI” tools run RSI on close, or on some moving average of price.
This script runs RSI on a *normalised* price-action series:
- We build a smoothed channel from RMA(high) and RMA(low).
- We normalise price against that channel (relative to the channel midpoint and width).
- We run RSI on that normalised series (default 14, but optionally matched to the Trend Lookback Period).
Using highs and lows instead of close or OHLC4 makes the trend value sensitive to *range shape* and *asymmetry* (big wicks, uneven extremes), not just the centre of the candle.
As compared to a simple RSI (also included simply for comparison), this PA Trend tends to decay faster and recovers faster.
🟩 HOW TO USE IT (PRACTICAL)
⭐ Trend pane
- Treat the line as a measure of *trend strength*, not a prediction.
- Neutral zone = trend is not convincingly bullish or bearish.
- Strong moves away from neutral = “trend has conviction”.
⭐ Overbought / oversold markers
Overbought/oversold doesn’t mean “reversal right now”.
It means the *rate of directional change* is unsustainably strong.
- Overbought in an uptrend: trend is overheating. Tighten long stops; expect rest/retrace/reversal once overheating ends.
- Oversold in an uptrend: the countertrend down is likely exhausting. Potential “buy the dip” context.
- Reverse the above for downtrends.
This works on any market, any timeframe. Lower timeframes will be choppier.
Don’t trade these signals blindly; use market structure, S/R, and your other tools.
🟩 SETTINGS (OVERVIEW)
🟦 Settings
- Pane Plot Mode: choose whether the pane shows Trend or Overbought/Oversold series.
- Trend Lookback Period: channel smoothing for the trend model (higher = smoother, lower = faster).
- Show Overbought & Oversold Shapes: show/hide the triangles on the main chart.
- Overbought/sold Lookback Period: channel smoothing for OB/OS detection (lower = more sensitive).
- Overbought/sold Adaptive Length: smoothing for the dynamic OB/OS levels (lower = more adaptive).
🟦 Display
- Transparency for the candle colour: bar colour transparency (Gradient mode).
- Trend Colour Mode: Classic vs strength-based Gradient.
🟦 Price Average
- Show Price Average: show/hide the OHLC4 average price line.
- Lookback: length for the price average.
- Smoothing: SMA / EMA / RMA.
- Colour Channel by Price Average: neutral/green/red channel colouring depending on whether the price average is inside/above/below the channel.
🟦 Advanced
- Trend Upper/Lower Neutral Threshold: neutral zone bounds (also used by the dynamic OB/OS logic).
- PA RSI Length: choose Fixed (14) or match the Trend Lookback Period.
- Show RSI (close): optional “reference RSI” plot with length.
🟩 ALERTS
There are built-in alert conditions for this indicator:
- Overbought PA Trend: triggers when the PA overbought condition is true.
- Oversold PA Trend: triggers when the PA oversold condition is true.
- Trend flips up: triggers when the trend changes from down to up (ignores any intervening neutral bars).
- Trend flips down: triggers when the trend changes from up to down (ignores any intervening neutral bars).
- Lost overbought: triggers on the first red candle after the overbought condition ends (set this alert on close to avoid false alerts).
- Lost oversold: triggers on the first green candle after the oversold condition ends (set this alert on close to avoid false alerts).
🟩 REPAINTING / CALCULATION NOTES
According to my understanding, this indicator does not repaint (it does not go back and alter closed bars).
However, while the current candle is forming, values that depend on the current price will update in real time. Once the candle closes, they are fixed.
The overbought/oversold calculations use Williams fractal-style confirmation logic, which cannot be known until some bars afterwards.
This affects when the OB/OS levels update, but new confirmations only affect future calculations, not the past.
🟩 CREDITS
The idea for using smoothed highs/lows to create a price-action channel came from my humble trading mentor. All the code is my own.
🟩 DISCLAIMER
No indicator is a substitute for knowing what you’re doing.
By using this indicator you agree that it might not do what you or anyone else expects.
You retain full responsibility for your trading at all times.
Before trading with actual money, first make sure your risk management is professional-level.
Weekly RSI + EMA Bias (FREE)Weekly RSI + EMA Bias — FREE
This indicator provides a clean, non-repainting weekly directional bias using:
• EMA trend filter
• RSI strength confirmation
• One controlled flip per week
• IST-based weekly entry & exit logic
• Holiday-safe exit handling (no missed exits)
WHAT THIS IS:
• A bias / confirmation tool
• Designed for positional & weekly traders
• Works on all intraday and higher timeframes
WHAT THIS IS NOT:
• Not a strategy
• No backtesting or performance metrics
• No buy/sell guarantees
METRICS TABLE:
The weekly metrics table is intentionally locked (🔒).
A fully unlocked metrics + strategy version is available separately.
Best used as a decision-support tool alongside your own execution rules.
Gold Projection DivergenceGOLD PROJECTION DIVERGENCE
Oscillator Companion for the Gold Macro Projection Model
OVERVIEW
The Gold Projection Divergence oscillator quantifies how far gold is trading from its projected fair value. While the main indicator shows where gold should be, this oscillator shows how extreme the mispricing is—providing precise timing signals for entries and exits.
HOW IT WORKS
The oscillator calculates the difference between actual gold price and the projected value, then normalizes it as a Z-score . This statistical measure shows how many standard deviations gold is trading away from its projected fair value.
Z > +2 — Gold is 2+ standard deviations above fair value (extremely overvalued)
Z > +1 — Gold is moderately overvalued
Z = 0 — Gold is trading at projected fair value
Z < -1 — Gold is moderately undervalued
Z < -2 — Gold is 2+ standard deviations below fair value (extremely undervalued)
VISUAL ELEMENTS
Histogram — Color-coded divergence magnitude
Yellow Line — Smoothed Z-score
Dashed Lines — +2 and -2 standard deviation levels
Dotted Lines — +1 and -1 standard deviation levels
Triangle Markers — Extreme crossover signals
Circle Markers — Zero-line crossings
HISTOGRAM COLORS
Dark Red — Z > +2 (extreme overvaluation)
Orange — Z between +1 and +2
Light Orange — Z between 0 and +1
Light Green — Z between -1 and 0
Green — Z between -2 and -1
Lime — Z < -2 (extreme undervaluation)
COMPONENT TABLE
The breakdown table shows divergence from each individual factor:
Silver — Is gold over/undervalued relative to silver?
M2 — Is gold over/undervalued relative to money supply?
DXY — Is gold over/undervalued relative to dollar strength?
Equity — Is gold over/undervalued relative to stocks?
TIPS — Is gold over/undervalued relative to real rates?
TRADING APPLICATIONS
Mean Reversion Strategy
Enter LONG when Z < -2 and begins rising
Enter SHORT when Z > +2 and begins falling
Use zero-line crossings for trend confirmation
Trend Following Filter
Only take long trades when Z < 0 (undervalued)
Only take short trades when Z > 0 (overvalued)
Divergence Confirmation
Bearish: Price makes new highs while Z-score makes lower highs
Bullish: Price makes new lows while Z-score makes higher lows
ALERTS
Extreme Undervaluation — Z crosses below -2
Extreme Overvaluation — Z crosses above +2
Moderate Undervaluation — Z crosses below -1
Moderate Overvaluation — Z crosses above +1
Divergence Turned Positive — Crossed above zero
Divergence Turned Negative — Crossed below zero
COMBINED USAGE
For best results, use both indicators together :
Main Indicator — Visual context of actual vs. projected on price chart
Divergence Oscillator — Precise measurement for timing decisions
The main indicator shows where gold should be; the oscillator shows how extreme the mispricing is and when to act.
Disclaimer: This indicator is for educational purposes only. Past correlations do not guarantee future relationships. Market conditions can alter historical relationships. Always use proper risk management.
Gold Macro Projection ModelGOLD MACRO PROJECTION MODEL
Multi-Factor Fair Value Estimation for Gold
OVERVIEW
The Gold Macro Projection Model estimates gold's fair value based on its historical relationships with key macroeconomic drivers. By synthesizing data from silver , M2 money supply , the US Dollar Index , TIPS (real rates proxy) , and major equity indices , this indicator projects where gold should theoretically be trading—helping traders identify potential overvaluation and undervaluation conditions.
HOW IT WORKS
This indicator employs three complementary projection methodologies :
Correlation-Weighted Z-Score Composite (50% weight)
Calculates rolling correlations between gold and each input factor. Factors with stronger correlations receive more influence. Each factor is normalized to a z-score, combined into a composite, then converted back to gold's price scale.
Silver/Gold Ratio Mean Reversion (35% weight)
The silver/gold ratio historically exhibits mean-reverting behavior. This component projects gold's implied price based on current silver prices and the historical average ratio.
M2 Money Supply Relationship (15% weight)
Gold tracks monetary expansion over long time horizons. This anchors the projection to the fundamental relationship between gold and the monetary base.
INPUT FACTORS
Silver — Strong positive correlation; precious metals move together
M2 Money Supply — Positive correlation; gold as inflation hedge
US Dollar Index (DXY) — Typically negative correlation; inverse relationship
TIPS ETF — Real interest rate proxy; gold responds to real yields
Equity Indices — Variable correlation; risk-on/risk-off dynamics
VISUAL ELEMENTS
Yellow Line — Actual gold price
Aqua Line — Projected fair value
Green Fill — Gold trading below projection (potentially undervalued)
Red Fill — Gold trading above projection (potentially overvalued)
Aqua Bands — Standard deviation envelope around projection
INFO TABLE
The indicator displays a real-time information panel showing:
Current actual vs. projected price
Divergence percentage and Z-score
Rolling correlations for each factor
Dynamic weight allocation
Buy/Sell signal based on divergence extremes
SIGNAL INTERPRETATION
STRONG BUY — Z-score below -2 (extremely undervalued)
BUY — Z-score between -2 and -1 (moderately undervalued)
NEUTRAL — Z-score between -1 and +1 (fairly valued)
SELL — Z-score between +1 and +2 (moderately overvalued)
STRONG SELL — Z-score above +2 (extremely overvalued)
SETTINGS
Correlation Period — Lookback for correlation calculations (default: 60)
Regression Period — Lookback for mean/standard deviation (default: 120)
Smoothing Period — EMA smoothing for projection line (default: 10)
Auto Weights — Toggle between correlation-based or manual weights
Band Multiplier — Standard deviation multiplier for bands (default: 1.5)
ALERTS
Gold Extremely Undervalued — Z crosses below -2
Gold Extremely Overvalued — Z crosses above +2
Gold Crossed Above Projection
Gold Crossed Below Projection
BEST PRACTICES
Use on daily timeframe for most reliable signals
Combine with the companion Gold Divergence Oscillator for timing
Disclaimer: This indicator is for educational purposes only. Past correlations do not guarantee future relationships. Always use proper risk management.
Silver Projection DivergenceSILVER PROJECTION DIVERGENCE
Standardized Fair Value Divergence Oscillator
OVERVIEW
The Silver Projection Divergence oscillator is the companion indicator to the Silver Macro Projection Model. It quantifies the gap between silver's actual price and its projected fair value, displaying this divergence as a standardized z-score. This format makes it easier to identify extreme conditions and time entries/exits based on mean reversion.
HOW IT WORKS
The oscillator converts raw divergence (Actual Silver - Projected Silver) to a z-score by normalizing against its historical distribution:
Z-Score > 0 - Silver trading ABOVE projected value (overvalued)
Z-Score < 0 - Silver trading BELOW projected value (undervalued)
Z-Score > 2 - Extreme condition (2 standard deviations)
VISUAL ELEMENTS
Main Plot
Green line/histogram - Negative divergence (undervalued)
Red line/histogram - Positive divergence (overvalued)
Color intensity increases when divergence is expanding
Reference Lines
+2 sigma / -2 sigma (dashed) - Extreme zones
+1 sigma / -1 sigma (dotted) - Moderate deviation
Zero line - Fair value equilibrium
Signal Markers
Green Triangle (bottom) - Z-score crosses below -2 (STRONG BUY)
Red Triangle (top) - Z-score crosses above +2 (STRONG SELL)
Background
Light red background - Extreme overvaluation (Z > 2)
Light green background - Extreme undervaluation (Z < -2)
SIGNAL INTERPRETATION
Z > +2.0 - Extreme Overvaluation - STRONG SELL / Take profits
Z +1.0 to +2.0 - Moderate Overvaluation - Caution / Reduce exposure
Z -1.0 to +1.0 - Fair Value Range - Neutral / Hold
Z -2.0 to -1.0 - Moderate Undervaluation - Accumulate / Scale in
Z < -2.0 - Extreme Undervaluation - STRONG BUY signal
COMPONENT TABLE
The bottom-right table breaks down divergence by factor:
Gold Ratio - Deviation from gold-implied fair value
M2 Supply - Divergence from monetary-implied value
DXY Signal - Dollar strength bullish/bearish indication
Equities - Equity market positioning signal
OVERALL - Combined signal with Z-score
TRADING APPLICATIONS
Mean Reversion Strategy
Enter LONG when Z < -2 and begins rising
Enter SHORT when Z > +2 and begins falling
Use zero-line crossings for trend confirmation
Trend Following Filter
Only take long trades when Z < 0 (undervalued)
Only take short trades when Z > 0 (overvalued)
Divergence Confirmation
Bearish: Price makes new highs while Z-score makes lower highs
Bullish: Price makes new lows while Z-score makes higher lows
ALERTS
Extreme Undervaluation - Z crosses below -2
Extreme Overvaluation - Z crosses above +2
Divergence Turned Positive - Crossed above zero
Divergence Turned Negative - Crossed below zero
COMBINED USAGE
For best results, use both with Silver Macro Projection Model - indicator:
Main Indicator - Visual context of actual vs. projected on price chart
Divergence Oscillator - Precise measurement for timing decisions
The main indicator (Silver Macro Projection Model - ) shows where silver should be; this oscillator shows how extreme the mispricing is and when to act.
Disclaimer: This indicator is for educational purposes only. Past correlations do not guarantee future relationships. Market conditions can alter historical relationships. Always use proper risk management.
Silver Macro Projection ModelSILVER MACRO PROJECTION MODEL
Multi-Factor Fair Value Estimation for Silver
OVERVIEW
The Silver Macro Projection Model estimates silver's fair value based on its historical relationships with key macroeconomic drivers. By synthesizing data from gold, M2 money supply, the US Dollar Index, and major equity indices, this indicator projects where silver should theoretically be trading, helping traders identify potential overvaluation and undervaluation conditions.
HOW IT WORKS
This indicator employs three complementary projection methodologies:
Correlation-Weighted Z-Score Composite (50% weight) - Calculates rolling correlations between silver and each input factor. Factors with stronger correlations receive more influence. Each factor is normalized to a z-score, combined into a composite, then converted back to silver's price scale.
Gold/Silver Ratio Mean Reversion (35% weight) - The gold/silver ratio historically exhibits mean-reverting behavior. This component projects silver's implied price based on current gold prices and the historical average ratio.
M2 Money Supply Relationship (15% weight) - Silver tracks monetary expansion over long time horizons. This anchors the projection to the fundamental relationship between silver and the monetary base.
INPUT FACTORS
Gold - Strong Positive - Precious metals move together; silver amplifies gold
M2 Supply - Positive - Inflation hedge; expands with monetary base
DXY - Negative - Dollar strength pressures commodity prices
S&P 500 - Variable - Risk sentiment indicator
Dow Jones - Variable - Industrial/economic health proxy
Nasdaq 100 - Variable - Growth/risk appetite indicator
Russell 2000 - Variable - Small-cap risk sentiment
VISUAL ELEMENTS
Silver Line (Gray) - Actual silver price
Yellow Line - Model's projected fair value
Green Fill - Silver trading BELOW projection (potentially undervalued)
Red Fill - Silver trading ABOVE projection (potentially overvalued)
INFORMATION TABLE
The indicator displays a real-time panel showing:
Current correlation coefficients for each factor
Dynamic weight allocation based on correlation strength
Z-scores for each input factor
Actual vs. projected silver price
Percentage divergence from fair value
Signal classification (Strong Buy to Strong Sell)
SETTINGS
Lookback Settings
Correlation Period (default: 60) - Bars used for rolling correlations
Regression Period (default: 120) - Bars for z-score normalization
Smoothing Period (default: 10) - EMA smoothing on projection
Weight Settings
Use Auto Correlation Weights - Weights adjust dynamically based on correlation strength
Manual Weights - Override with custom factor weights
ALERTS
Silver Extremely Undervalued (Z < -2)
Silver Extremely Overvalued (Z > +2)
Price crossed above projection
Price crossed below projection
BEST PRACTICES
Use on daily timeframe for most reliable signals
Combine with the companion Divergence Oscillator for timing
Extreme divergences (>2 sigma) historically precede mean reversion
Consider macro environment as correlations shift during different regimes
Longer regression periods (150-250) for investing; shorter (60-90) for trading
Disclaimer: This indicator is for educational purposes only. Past correlations do not guarantee future relationships. Always use proper risk management.
Percentile-Based BB% Trend - MattesOverview
The Percentile-Based BB% Trend is a robust momentum oscillator that reimagines the classic Bollinger %B indicator using percentile-based bands and median absolute deviation (MAD). Instead of relying on a simple moving average and standard deviation (which can be heavily influenced by outliers), this version builds dynamic bands from the 25th and 75th percentiles of price, creating a noise-resistant framework for measuring where the current price sits relative to its recent distribution.
How It’s Calculated
Percentile Smoothing : 25th percentile (lower boundary) and 75th percentile (upper boundary) of the selected source.
Basis Line : Midpoint between the 25th and 75th percentiles as a robust central measure.
Robust Volatility : Median Absolute Deviation (MAD) multiplied by a user-defined factor to set band width.
PBB% Value : (Price - Lower Band) / (Band Width), then shifted so the midline is at 0.
Trend Line : Light EMA smoothing applied to the raw value and displayed as colored columns.
How It Differs From Traditional %B
Uses 25th/75th percentiles + MAD instead of SMA + standard deviation → far less sensitive to outliers.
More adaptive to real-world skewed price distributions.
Stronger noise filtering while staying responsive to genuine momentum.
Why It’s Useful
Reduced false signals in choppy or spiky markets
Clear view of momentum strength and price extension
Persistent readings above/below 0 indicate sustained bullish/bearish control
Excellent as a trend-strength filter across all asset classes and timeframes
Application Examples
Trend Confirmation – Midline (0) crossovers confirm direction when paired with trend-following tools.
Overextension Warnings – Extreme readings signal potential exhaustion.
Momentum Filtering – Avoid entries when oscillator shows weak or overstretched conditions.
Divergence Hunting – Spot price making new highs/lows while oscillator fails to confirm.
Great inventions require greate care!
Not a Standalone Strategy: This indicator is designed as a complementary tool and should always be combined with other forms of analysis (price action, volume, higher-timeframe trend, or additional indicators).Potential Lags in Explosive Moves: The robust calculations and smoothing can slightly delay signals during very strong trends.Parameter Sensitivity: Optimal length and multiplier vary by market and timeframe — backtesting is essential.No indicator guarantees profits; past performance is not indicative of future results.
This indicator builds directly on the foundation of the Percentile-Based Bollinger Bands - Mattes, extending its robust methodology into oscillator form for deeper momentum analysis.Shoutout to all my Masterclass Brothers and L4 Gs!
ChromaFlows Momentum Index - Consensus Engine V1.2ChromaFlows Momentum Index — Conceptual Description
Overview
ChromaFlows Momentum Index is a momentum-analysis tool designed to evaluate trend quality and directional agreement by combining multiple oscillators into a single consensus-based system.
Rather than displaying independent signals from separate indicators, this script produces output only when all internal engines align, filtering out conflicting or low-quality momentum conditions.
The goal is not to generate standalone trading signals, but to provide a clear visual representation of momentum consensus and regime strength.
Conceptual Architecture
The indicator is built around three momentum engines, each assigned a distinct functional role:
Slow Stochastic — acts as the primary momentum baseline, defining the broader overbought/oversold context.
Fast Stochastic — functions as a short-term acceleration filter, detecting rapid changes in momentum relative to the baseline.
RSI — serves as a regime validator, confirming whether momentum conditions are stable enough to be considered directional.
These components are not averaged or displayed independently.
Each engine is conditionally dependent on the others.
Interaction & Consensus Logic
ChromaFlows uses a strict consensus model:
A directional state is produced only when all momentum engines agree on direction.
If even one engine diverges, the system suppresses directional output and enters a neutral state.
This logic prevents partial or conflicting momentum signals from being displayed and reduces noise commonly produced by single-indicator oscillators.
The resulting output represents agreement quality, not raw oscillator values.
Visual Output & Interpretation
The main oscillator wave represents the current momentum state derived from the consensus logic:
Bullish Consensus — all engines aligned to the upside
Bearish Consensus — all engines aligned to the downside
Neutral State — disagreement or low-quality momentum
Additional visual elements (signal markers and trend filters) are derived from the same internal state, providing contextual confirmation rather than independent signals.
These visuals are intended to help users interpret momentum context, not to automate execution.
Originality & Purpose
This script is not a visual mashup of existing indicators.
Its output cannot be replicated by observing the individual components separately, as the system’s behavior depends on conditional interaction and suppression logic between engines.
By requiring full agreement before displaying momentum states, ChromaFlows emphasizes momentum clarity over signal frequency, making it suitable as a contextual analysis layer within broader trading frameworks.
Usage Notes
ChromaFlows Momentum Index is a visual analysis tool designed to assist with market interpretation.
It does not provide investment advice or guarantee outcomes and should be used in conjunction with other forms of analysis and risk management.
Version Notes (V1.2)
• Expanded divergence detection logic added for SMI line for improved momentum context
• Minor internal optimizations and code refinements
VolMo Algorithm [Pro]VolMo Algorithm - Volume Momentum Oscillator
📊 Overview
VolMo Algorithm is a professional-grade composite momentum oscillator that synthesizes three critical market dimensions into a single, unified signal designed for institutional-level analysis.
This indicator was engineered to cut through market noise by fusing:
Volatility Band Analysis - Mean reversion detection through dynamic price envelopes
Dual EMA Momentum - Trend identification via fast/slow crossover mechanics
Swing Structure Recognition - Context awareness through pivot-based structure
⚙️ How It Works
The Composite Signal Formula
text
VolMo = (Momentum Score × MD Weight) + (Band Position Score × DTB Weight)
Component Description
Momentum Score Normalized momentum (Fast EMA - Slow EMA) expressed in standard deviations
Band Position Score Price location within volatility bands indicating stretch/compression
Signal Interpretation
Value Range Market State
> 0 Bullish momentum bias
< 0 Bearish momentum bias
> +2.0 Overbought (mean reversion likely)
< -2.0 Oversold (mean reversion likely)
🎯 Key Features
✅ Adaptive Histogram - Color-coded by momentum direction AND acceleration
Bright colors = Momentum accelerating
Dim colors = Momentum decelerating
✅ Signal Line Crossovers - Early warning for trend changes
✅ Overbought/Oversold Zones - Statistical extremes for mean reversion plays
✅ Triple Confirmation System - Signals when momentum, price, AND bands align
✅ Real-Time Dashboard - At-a-glance status including:
Current trend state with directional icons
Signal strength meter (0-100%)
Band position percentage
Momentum acceleration status
Active confirmation status
✅ 5 Color Themes - Neon Pro, Classic, Ocean, Sunset, Monochrome + Custom
✅ Comprehensive Alerts - Trend changes, crossovers, OB/OS entries, confirmations
