10 EMA Indicator ( Murod Khamidov )Quyidagi qisqacha maʼlumot indikatorning asosiy funksiyalarini tushuntiradi:
10 EMA Indikatori
Koʻp vaqt oraligʻidagi hisoblash: Indikator TradingView’da 10 ta eksponentsial harakatlanuvchi o‘rtacha (EMA) ni hisoblaydi, har biri uchun alohida timeframe (vaqt oraligʻi) tanlash imkoniyati mavjud.
Moslashtiriladigan parametrlar: Har bir EMA uchun mustaqil ravishda parametrlar belgilanishi mumkin:
Length: Hisoblash davri (period) aniqlanadi.
Source: Hisoblash uchun asosiy narx (masalan, close) tanlanadi.
Offset: Chizma siljishi uchun qiymat.
Vizual ajratish: Har bir EMA turli rang bilan chiziladi, bu esa grafikda ularni oson aniqlash imkonini beradi.
Tahlil va strategiya: Indikator yordamida bozor tendensiyalari, trend yo‘nalishlari va potentsial signal nuqtalari tezda aniqlanishi mumkin.
Ushbu indikator turli strategiyalar va tahlillar uchun qulaylik yaratib, bozordagi o‘zgarishlarni tezda kuzatib borishga yordam beradi.
指标和策略
Vanguard Lexus Scalping - Enhanced**Deskripsi Singkat Indikator:**
Indikator **Vanguard Lexus Ultimate Scalping** dirancang khusus untuk **XAU/USD** dengan fokus pada **akurasi tinggi dan validasi multi-aspek**. Indikator ini menggabungkan **EMA (9 & 50)** untuk mengidentifikasi tren, **Stochastic RSI** untuk mendeteksi overbought/oversold, serta **Supply & Demand Zones** untuk menentukan area entry terbaik.
Dilengkapi dengan **Fair Value Gap (FVG)** dan **Liquidity Sweep Detection**, indikator ini mampu mendeteksi pergerakan harga institusional dan menghindari sinyal palsu. **ATR Volatility Filter** digunakan untuk memastikan entry hanya dalam kondisi pasar yang cukup volatile.
Indikator ini memberikan **sinyal BUY dan SELL** yang lebih presisi dengan kombinasi **crossover EMA, price action, dan konfirmasi likuiditas**, sehingga cocok untuk strategi **scalping** yang mengutamakan **akurasi dan efisiensi trading**.
🚀 **Cocok untuk trader scalping yang menginginkan sinyal entry dengan probabilitas tinggi dan minim false breakout!**
Heikin Ashi by readCrypto
Hello, traders.
If you "Follow", you can always get new information quickly.
Please also click "Boost".
Have a nice day today.
-------------------------------------
Heikin Ashi candle chart is a trend candle chart that minimizes fakes.
Therefore, it looks different from the existing candle chart.
Because of this, it can be difficult to know the actual price movement.
To compensate for this, there are indicators that display in various forms.
The Heikin Ashi candle that I would like to introduce this time is an indicator displayed as a Line.
This Line indicator is expressed as the median of the Open and Close values of the Heikin Ashi candle.
This allows you to know the current trend.
-
USDT.D Line chart is also displayed as the median of the Open, High, Low, and Close of USDT.D.
-
The green color of the two indicators above means an increase, and the red color means a decrease.
In order to distinguish between the Heikin Ashi Line chart and the USDT.D Line chart, the green color of the Heikin Ashi Line chart is thickened, and the red color of the USDT.D Line chart is thickened.
The interpretation method is
- Heikin Ashi rises, USDT.D falls, StochRSI rises: The price is likely to rise.
- Heikin Ashi falls, USDT.D rises, StochRSI falls: The price is likely to fall.
- The remaining movements may correspond to volatility, i.e. fake, so watch the situation.
----------------------------
As we add a lot of information, it may be confusing which one is important.
The key indicators for trading are the HA-Low, HA-High, BW(0), and BW(100) indicators.
Trend indicators are Trend Cloud indicator and M-Signal indicator on 1D, 1W, and 1M charts.
Intuition is important when trading.
If you do not make a quick judgment, the response time will be delayed and there is a high possibility that the transaction will proceed in the wrong direction.
Therefore, when you touch your own point or section marked on the chart, you should check whether a transaction is possible, and if you judge that a transaction is possible and start a transaction, you should know how to wait.
Also, you should think about whether to cut your loss when the movement is different from the direction you thought.
In this way, you should create a basic trading strategy when you start trading and start trading, and if you start trading based on this, you should try to stick to the trading strategy.
-
Thank you for reading to the end.
I hope you have a successful transaction.
--------------------------------------------------
안녕하세요?
트레이더 여러분, 반갑습니다.
"팔로우"를 해 두시면, 언제나 빠르게 새로운 정보를 얻으실 수 있습니다.
"부스트" 클릭도 부탁드립니다.
오늘도 좋은 하루되세요.
-------------------------------------
Heikin Ashi 캔들 차트는 fake를 최소화한 차트로서 추세 캔들 차트라 할 수 있습니다.
따라서, 기존의 캔들 차트와 다른 모습을 보입니다.
이로인해 실제 가격 움직임을 알기가 애매할 수 있습니다.
이를 보완하고자 여러 형태로 표시하는 지표들을 있습니다.
제가 이번에 소개해 드리고자 하는 Heikin Ashi 캔들은 Line으로 표시되는 지표입니다.
이 Line 지표는 Heikin Ashi 캔들의 Open, Close 값의 중간값으로 표현됩니다.
이로서 현재의 추세를 알 수 있게 하였습니다.
-
USDT.D Line chart 또한 USDT.D의 Open, High, Low, Close의 중간값으로 표시됩니다.
-
위 두 지표의 Green색은 상승을, Red색은 하락을 의미합니다.
Heikin Ashi Line chart와 USDT.D Line chart를 구분하기 위해서 Heikin Ashi Line chart의 Green색을 두껍게 처리하고, USDT.D Line chart의 Red색을 두껍게 처리하였습니다.
해석 방법은
- Heikin Ashi 상승, USDT.D 하락, StochRSI 상승 : 가격이 상승할 가능성이 높음.
- Heikin Ashi 하락, USDT.D 상승, StochRSI 하락 : 가격이 하락할 가능성이 높음.
- 나머지 움직임은 변동성, 즉, fake에 해당될 수 있으므로 상황을 지켜봅니다.
----------------------------
많은 정보를 추가하다 보니, 어떤 것이 중요한 것인지 혼란스러울 수 있습니다.
거래의 핵심 지표는 HA-Low, HA-High, BW(0), BW(100) 지표입니다.
추세 지표는 Trend Cloud 지표와 1D, 1W, 1M 차트의 M-Signal 지표입니다.
거래시 중요한 것은 직관성입니다.
빠르게 판단하지 않으면, 대응 시간이 늦어져 엉뚱한 방향으로 거래가 진행될 가능성이 높기 때문입니다.
따라서, 차트에 표시해 둔 자신만의 지점이나 구간을 터치하였을 때 거래가 가능한지 확인하고 거래가 가능하다고 판단하여 거래를 시작하였다면 기다릴 줄도 알아야 합니다.
또한, 자신이 생각한 방향과 다르게 움직임이 나왔을 때 손절을 할 것인가도 생각해야 합니다.
이렇게 거래 시작시에 기본적인 거래 전략을 만들고 거래를 시작해야 하고, 이를 바탕으로 거래를 시작하였다면 거래 전략을 지킬려고 노력해야 합니다.
-
끝까지 읽어주셔서 감사합니다.
성공적인 거래가 되기를 기원입니다.
--------------------------------------------------
10 EMA HTF LTF10 EMA HTF LTF – Exponential Moving Averages Indicator
📌 Indikator haqida
Ushbu indikator joriy vaqt oralig‘ida (LTF – Lower Timeframe) va yuqori vaqt oralig‘ida (HTF – Higher Timeframe) trendni tahlil qilish uchun 10 ta Exponential Moving Average (EMA) chizadi. Har bir EMA o‘zining uzunligiga qarab, harakatlanish tezligiga ega bo‘lib, trendlardagi o‘zgarishlarni kuzatish va trend davomiyligini aniqlash imkonini beradi.
📊 Xususiyatlar
✅ 10 ta EMA: (10, 15, 20, 25, 30, 35, 40, 45, 50, 55)
✅ Trendlardagi o‘zgarishlarni kuzatish uchun mos
✅ Rangli va aniq grafik tasvir
✅ Qisqa va uzoq muddatli trendlarni aniqlashga yordam beradi
📈 Foydalanish usuli
EMA’lar fanning shakliga kirsa, bu kuchli trend mavjudligini bildiradi.
Narx EMA’lardan yuqorida bo‘lsa – bullish trend (o‘sish), pastda bo‘lsa – bearish trend (pasayish).
EMA’lar bir-biriga yaqinlashsa – konsolidatsiya yoki trend o‘zgarishi ehtimoli bor.
🔔 Qaysi treyderlar uchun mos?
✔ Skalperlar va intraday treyderlar – qisqa muddatli trendlarni kuzatish uchun.
✔ Swing treyderlar – uzoq muddatli trendlarga asoslangan strategiyalar uchun.
✔ Yangi boshlovchilar – asosiy trend tahlil qilishni o‘rganish uchun oddiy va tushunarli indikator.
💡 Qo‘shimcha fikrlar
Bu indikator har qanday aktiv (forex, aksiyalar, kriptovalyuta) uchun ishlaydi va boshqa indikatorlar bilan birga qo‘llash mumkin.
ChillLax Relative Strength Line with NewHigh NewLow Blue DotThis is similar to the IBD MarketSurge (MarketSmith) Blue Dot:
This plots the Relative Strength line vs. an index (default index is SPX), with a Dot when the RS line is hitting a New High.
If the RS hits a New High over the past X bars (default is 50), it shows a Light Blue (user definable) Dot on the RS line, if RS hits New High before the instrument hits New High, it shows a bigger/darker Blue Dot. Reverse for New Lows (orange for RS NL, Red for RS NL before Price NL)
This Dot is similar to the IBD Marketsurge RS New High Blue Dot, this indicator shows all the previous dots (MarketSurge shows only the last one). This on, unlike IBD, also shows RS New Lows. This one distinguishes RS NH before Price NH, and RS NL before Price NL. Lastly, IBD's lookback period is 52 week, here it is default to 50 days, but it is changeable.
VCRIX OscillatorVCRIX Oscillator: Normalized Volatility Index for Crypto
A normalized (0-100) version of the VCRIX (Volatility Cryptocurrency Index) based on Kim, Trimborn, and Härdle's research. Transforms complex volatility calculations into an easy-to-read oscillator format.
### Indicator Specifications
• Type: Oscillator
• Timeframe: 1D recommended (4H minimum)
• Scale: 0-100
• Overlay: No
• Assets: Cryptocurrency
### Key Levels
• Overbought Zone (>80)
- Extreme market volatility
- Potential reversal points
- Risk management zone
• Normal Range (20-80)
- Standard trading conditions
- Trending phases
- Healthy volatility
• Oversold Zone (<20)
- Low volatility periods
- Potential breakout setup
- Accumulation zones
### Input Parameters
• Lookback Period: 30 days
• Kernel Bandwidth: 0.3
• Jump Threshold: 4.0
• Normalization Period: 252 days
### Signals
1. Overbought/Oversold:
- Cross above 80 = Extreme volatility alert
- Cross below 20 = Low volatility alert
2. Trend Analysis:
- Rising oscillator = Increasing volatility
- Falling oscillator = Decreasing volatility
3. Divergences:
- Price making highs, oscillator making lows = Potential trend weakness
- Price making lows, oscillator making highs = Potential trend strength
### Trading Applications
1. Risk Management:
- Reduce position sizes when > 80
- Increase positions when < 20
- Use normal sizing 20-80
2. Entry/Exit Timing:
- Look for breakouts when oscillator < 20
- Consider taking profits when > 80
- Watch for divergences at extremes
### Formula Components
• Raw VCRIX calculation using:
- Log returns with jump detection
- Gaussian kernel smoothing
- Bi-power variation
• Normalized to 0-100 scale using yearly high/low
• 10-period smoothing overlay
### Notes
- More effective on higher timeframes
- Use with trend confirmation
- Consider market context
- Built-in alerts at extreme levels
Based on: "VCRIX - A Volatility Index for Crypto-Currencies" by Kim, Trimborn, and Härdle (2019)
Reversal Indicator [SL/TP]Этот индикатор помогает находить точки разворота на графике криптовалютной пары. Он использует комбинацию фракталов, RSI, объема и скользящих средних для генерации сигналов на покупку (BUY) и продажу (SELL). Также индикатор отображает уровни Stop Loss (SL) и Take Profit (TP) на графике.
## Особенности:
- **Анти-перерисовка**: Сигналы генерируются только после закрытия свечи.
- **Многоуровневая фильтрация**: Используются RSI, объем, трендовые фильтры и ATR.
- **Визуализация**: Уровни SL и TP отображаются на графике.
- **Алерты**: Поддержка уведомлений о сигналах.
## Параметры:
- **RSI Length**: Период RSI (по умолчанию 14).
- **Volume Multiplier**: Множитель объема (по умолчанию 1.5).
- **Stop Loss (%)**: Уровень Stop Loss в процентах (по умолчанию 1%).
- **Take Profit (%)**: Уровень Take Profit в процентах (по умолчанию 2%).
## Как использовать:
1. Добавьте индикатор на график.
2. Настройте параметры под свои предпочтения.
3. Используйте сигналы в сочетании с другими инструментами анализа.
## ⚠️ ПРЕДУПРЕЖДЕНИЕ О РИСКАХ:
Торговля на финансовых рынках связана с существенным риском потери капитала. Этот индикатор предоставляет только информационные сигналы и не гарантирует прибыль. Прежде чем использовать этот инструмент, убедитесь, что вы:
- Понимаете все риски, связанные с торговлей.
- Торгуете только тем капиталом, который можете позволить себе потерять.
- Используете Stop Loss для ограничения убытков.
- Тестируете стратегию на исторических данных перед использованием на реальных деньгах.
Автор индикатора не несет ответственности за любые убытки, возникшие в результате использования этого инструмента.
Sai24_EAM9_15The Multi Timeframe EMA Trend Indicator is a powerful tool designed to analyze market trends across multiple timeframes using the 9-period and 15-period Exponential Moving Averages (EMAs). It allows traders to select three different timeframes, dynamically calculating the EMA conditions for each. When the 9-EMA is above the 15-EMA in all three selected timeframes, it confirms a bullish trend and plots green columns. Conversely, when the 9-EMA is below the 15-EMA across all timeframes, it confirms a bearish trend and plots red columns.
If the trend signals are mixed, a gray column is displayed, indicating uncertainty in market direction. Additionally, the indicator measures trend strength by calculating the absolute difference between the 9-EMA and 15-EMA, normalizing it relative to the price, and using this value to adjust the height of the plotted columns.
A stronger trend results in taller columns, while weaker trends produce shorter columns. This visualization helps traders easily gauge market momentum, identify strong trends, and filter potential trade entries. By providing a multi-timeframe perspective, the indicator reduces false signals and enhances trend confirmation, making it an effective tool for scalping, intraday, and swing trading strategies.
Daily Movement Trend LinesDaily Movement Trend Lines Indicator
This indicator visually decomposes each trading day into distinct, self-contained segments based on intraday price action. Here’s how it works:
Daily Isolation:
The indicator treats each trading day separately. It uses the opening price of the day as the starting point and the closing price of the final candle as the endpoint, ensuring that movements from one day do not carry over to the next.
Local Extremes and Trend Reversals:
Throughout the day, the indicator tracks local highs and lows. It dynamically identifies significant turning points (reversals) when the price moves in the opposite direction of the current trend. A user-adjustable tolerance parameter (expressed as a percentage) filters out minor fluctuations, ensuring that only meaningful price movements are considered.
Visual Representation:
When a reversal is detected:
A static blue line is drawn from the last confirmed pivot (the previous reversal point) to the current local extreme.
A label ("H" for a high or "L" for a low) is placed at the extreme point to denote the reversal.
A dynamic red line continuously connects the last confirmed pivot to the current price, updating in real time as the day progresses.
Day-End Finalization:
At the start of a new trading day, the indicator finalizes the previous day’s movement by drawing a final segment from the last pivot to the close of the previous day. It then resets its calculations, using the new day’s opening price as the new starting point.
Long and Short Term Highs and LowsLong and Short Term Highs and Lows
Overview:
This indicator is designed to help traders identify significant price points by marking new highs and lows over two distinct timeframes—a long-term and a short-term period. It achieves this by drawing optional channel lines that outline the highest highs and lowest lows over the chosen time periods and by plotting visual markers (triangles) on the chart when a new high or low is detected.
Key Features:
Dual Timeframe Analysis:
Long Term: Uses a user-defined “Time Period” (default 52) and “Time Unit” (default: Weekly) to determine long-term high and low levels.
Short Term: Uses a separate “Time Period” (default 50) and “Time Unit” (default: Daily) to compute short-term high and low levels.
Optional Channel Display:
For both long and short term periods, you have the option to display a channel by plotting the highest and lowest values as lines. This visual channel helps to delineate the range within which the price has traded over the selected period.
New High/Low Markers:
The indicator identifies moments when the highest high or lowest low is updated relative to the previous bar.
When a new high is established, an up triangle is plotted above the bar.
Conversely, when a new low occurs, a down triangle is plotted below the bar.
Separate input toggles allow you to enable or disable these markers independently for the long-term and short-term setups.
Inputs and Settings:
Long Term High/Low Period Settings:
Show New High/Low? (STW): Toggle to enable or disable the plotting of new high/low markers for the long-term period.
Time Period: The number of bars used to calculate the highest high and lowest low (default is 52).
Time Unit: The timeframe on which the long-term calculation is based (default is Weekly).
Show Channel? (SCW): Toggle to display the channel lines that connect the long-term high and low levels.
Short Term High/Low Period Settings:
Show New High/Low?: Toggle to enable or disable the plotting of new high/low markers for the short-term period.
Time Period: The number of bars used for calculating the short-term extremes (default is 50).
Time Unit: The timeframe on which the short-term calculations are based (default is Daily).
Show Channel?: Toggle to display the channel lines for the short-term highs and lows.
Indicator Logic:
Channel Calculation:
The script uses the request.security function to pull data from the specified timeframes. For each timeframe:
It calculates the lowest low over the defined period using ta.lowest.
It calculates the highest high over the defined period using ta.highest.
These values can be optionally plotted as channel lines when the “Show Channel?” option is enabled.
New High/Low Detection:
For each timeframe, the indicator compares the current high (or low) with its immediate previous value:
New High: When the current high exceeds the previous bar’s high, an up triangle is drawn above the bar.
New Low: When the current low falls below the previous bar’s low, a down triangle is drawn below the bar.
Usage and Interpretation:
Trend Identification:
When new highs (or lows) occur, they can signal the start of a strong upward (or downward) movement. The indicator helps you visually track these critical turning points over both longer and shorter periods.
Channel Breakouts:
The optional channel display offers additional context. Price movement beyond these channels may indicate a breakout or a significant shift in trend.
Customizable Timeframes:
You can adjust both the time period and time unit to fit your trading style—whether you’re focusing on longer-term trends or short-term price action.
Conclusion:
This indicator provides a dual-layer analysis by combining long-term and short-term perspectives, making it a versatile tool for identifying key highs and lows. Whether you are looking to confirm trend strength or spot potential breakouts, the “Long and Short Term Highs and Lows” indicator adds a valuable visual element to your TradingView charts.
Daily Trend Lines and hidden levelsOverview
This enhanced version of the Daily Trend Lines indicator combines intraday trend visualization with historical price level analysis. It identifies and displays strong support and resistance levels based on previous price action while maintaining the original daily trend tracking functionality.
Key Features
1. Daily Trend Tracking
Monitors and displays intraday price movements
Updates trend lines in real-time
Connects daily open price to current high and low
Color-coded visualization (green for highs, red for lows)
2. Strong Level Analysis
Analyzes historical price data to identify significant levels
Uses adaptive threshold for level identification
Considers both high and low points
Displays persistent price levels across multiple days
3. Customization Options
Adjustable lookback period for historical analysis
Configurable strength threshold for level identification
Customizable colors and line styles
Adjustable line widths and visualization parameters
IronCondor 10am 30TF by RMThe IronCondor 10am 30TF indicator shows Iron Condor trades win rate over a large number of days.
The default ETFs in this indicators are "QQQ", "SPY", "RUT" , "CBTX" and "SPX", other entries have not been tested.
Iron Condor quick explanation:
- Iron Condors trades have four options, generally, are based around a Midpoint price (Current Market Price Strike) and
- Two equally distances Strikes for the SELL components (called the Body of the Iron Condor)
- Further away from the two SELLs, another Two BUYs for protection (not considered in this indicator)
- Iron Condors are used for Passive Income based on small gains most of the time.
The IronCondor 10am 30TF has its logic created based on the premises that:
- Most days the market prices stay within a range.
- As example the S&P market prices would stay within 1% on about 80% of the time
- The moving markets (bullish or bearish) occur about 20% of the time
- The biggest market price volatility generally occurs before market opens and then around the first hour or so of trade in the day.
- After the first hour or so of the market the prices would be most likely to stay within a range.
The operation is simple:
- At the Trade Star time in the day (say 10:30 Hrs.) draws a vertical yellow line, then
- Creates two blue horizontal lines for the SELL limits in the Iron Condor Body, at +/- 1% price boundary (check Ticker list below for values)
- At the Trade End time (say 16:00 Hrs.) checks that none of the SELL limits have been broken by highs or lows during the trade day
(The check is done calculating at Trade End time the high/lows 10 bars back for 30 min TF - timeframe)
- There is a label at each Trade End time with Win/Loss and Body value.
- There is one final label with overall calculated past performance in Win percentage out of 'n' trades
Defaults and User Entries:
- The User can modify the Midpoint price called 'IronCondor Midpoint STRIKE' (default is the Candle Close at the selected time)
- The User can modify the Body value called 'IronCondor Body' (default is the Ticker's selected value as per list below)
"QQQ" or "SPY" Body = 5
"RUT" or "CBTX" Body = 20
"SPX" Body = 60
* Disclaimer: This is not a Financial tool, it cannot used as any kind of advice to invest or risk moneys in any market,
Markets are volatile in nature - with little or no warning - and will drain your account if you are not careful.
Use only as an academic demonstrator => * Use at your own risk *
Bollinger Bands & RSI SignalThis trading signal script generates **buy and sell alerts** based on a combination of **Bollinger Bands** and the **Relative Strength Index (RSI)**.
### **How It Works**
- **Buy Signal:** Triggers when the price touches or falls below the **lower Bollinger Band**, RSI is **below the minimum threshold**, and Bollinger Band width is sufficiently large.
- **Sell Signal:** Triggers when the price reaches or exceeds the **upper Bollinger Band**, RSI is **above the maximum threshold**, and the Bollinger Band width meets the minimum size requirement.
- The script helps identify **potential reversal points** in the market where price movements may be overextended.
### **Best Use Cases**
- Suitable for **range-bound** and **volatile markets**.
- Can be used to confirm **overbought/oversold conditions** before entering trades.
- Works well on **shorter timeframes (1m, 5m, 15m)** for intraday traders.
16 LONDONcombines market structure detection with trend line drawing to help traders visualize key swing points, trend shifts, and break of structure (BOS). It is designed for traders who use Smart Money Concepts (SMC), price action, and trend-following strategies
BTC Point & Figure Buy Signals for 2025Original Credit to www.tradingview.com for his 2020 BTC BPI Script.
I've updated the script to pinescript v5 and have swapped out the trading pairs for 27 pairs that several LLM AI's recommended as those most correlated to Bitcoin's price action.
The results are wonderful, and I've been using this updated version primarily as a strong confluence indicator for mainly long entries, though it does pretty well in timing tops and short entries as well.
Please let me know if you have a more definitive source for a basket of trading pairs to use, and I'll happily edit the script (or you can if you are proficient) and create a new version.
Given 4 years have passed and much more expanded and saturated the number of coins are in the market, I thought it would be interesting, if not informative to update the pairs.
An analysis of the trading pairs used in 2020 vs 2025 is as follows:
Common Trading Pairs
The following trading pairs are present in both scripts:
ADAUSDT
ALGOUSDT
ATOMUSDT
BCHUSDT
BNBUSDT
BTCUSDT
DOGEUSDT
ETHUSDT
HBARUSDT
LTCUSDT
VETUSDT
XLMUSDT
XMRUSDT
XRPUSDT
XTZUSDT
ZECUSDT
Unique to List
The following trading pairs are only found in the 2020 script:
BATUSDT
BTSUSDT
DASHUSDT
EOSUSDT
ETCUSDT
FTTUSDT
HOTUSDT
ICXUSDT
IOTAUSDT
LSKUSDT
NANOUSDT
NEOUSDT
OMGUSDT
ONTUSDT
QTUMUSDT
REPUSDT
RVNUSDT
SCUSDT
THETAUSDT
TRXUSDT
WAVESUSDT
ZILUSDT
Unique to List 2
The following trading pairs are only found in the 2025 list:
APTUSDT
AVAXUSDT
DOTUSDT
FILUSDT
ICPUSDT
IMXUSDT
LDOUSDT
LINKUSDT
RNDRUSDT
SHIBUSDT
SOLUSDT
Summary
Common Pairs: There are 16 trading pairs shared between the two scripts.
Unique to List 2020: 22 trading pairs that are not in 2025 pairs
Unique to 2025 pairs: : 11 trading pairs that are not in 2020 pairs
Enjoy, provide feedback and remember, all credit to @LonesomeTheBlue for the OG script.
House of Traders: Show Volume BuzzThis script calculates and visualizes a Volume Buzz indicator, which approximates the relative volume of a stock compared to its average volume over the past 100 days. The script provides insights into volume spikes, helping traders understand whether a stock is experiencing higher or lower trading volume compared to its historical average.
About House of Traders:
House of Traders offers comprehensive coaching and training for day traders, focusing on building consistent trading skills through personalized guidance. Whether you're a beginner or experienced trader, House of Traders provides a proven framework to help you trade with confidence. Join the community and start mastering the U.S. stock market with expert insights and daily trade ideas tailored to your goals.
Important Links
houseoftraders.nl
instagram.com/houseoftraders.nl
instagram.com/casper.wildemast
Blockchain Fundamentals: Liquidity Cycle MomentumLiquidity Cycle Momentum Indicator
Overview:
This indicator analyzes global liquidity trends by calculating a unique Liquidity Index and measuring its year-over-year (YoY) percentage change. It then applies a momentum oscillator to the YoY change, providing insights into the cyclical momentum of liquidity. The indicator incorporates a limited historical data workaround to ensure accurate calculations even when the chart’s history is short.
Features Breakdown:
1. Limited Historical Data Workaround
Function: The limit(length) function adjusts the lookback period when there isn’t enough historical data (i.e., near the beginning of the chart), ensuring that calculations do not break due to insufficient data.
2. Global Liquidity Calculation
Data Sources:
TVC:CN10Y (10-year yield from China)
TVC:DXY (US Dollar Index)
ECONOMICS:USCBBS (US Central Bank Balance Sheet)
FRED:JPNASSETS (Japanese assets)
ECONOMICS:CNCBBS (Chinese Central Bank Balance Sheet)
FRED:ECBASSETSW (ECB assets)
Calculation Methodology:
A ratio is computed (cn10y / dxy) to adjust for currency influences.
The Liquidity Index is then derived by multiplying this ratio with the sum of the other liquidity components.
3. Year-over-Year (YoY) Percent Change
Computation:
The indicator determines the number of bars that approximately represent one year.
It then compares the current Liquidity Index to its value one year ago, calculating the YoY percentage change.
4. Momentum Oscillator on YoY Change
Oscillator Components:
1. Calculated using the Chande Momentum Oscillator (CMO) applied to the YoY percent change with a user-defined momentum length.
2. A weighted moving average (WMA) that smooths the momentum signal.
3. Overbought and Oversold zones
Signal Generation:
Buy Signal: Triggered when the momentum crosses upward from an oversold condition, suggesting a potential upward shift in liquidity momentum.
Sell Signal: Triggered when crosses below an overbought condition, indicating potential downward momentum.
State Management:
The indicator maintains a state variable to avoid repeated signals, ensuring that a new buy or sell signal is only generated when there’s a clear change in momentum.
5. Visual Presentation and Alerts
Plots:
The oscillator value and signalline are plotted for visual analysis.
Overbought and oversold levels are marked with dashed horizontal lines.
Signal Markers:
Buy and sell signals are marked with green and maroon circles, respectively.
Background Coloration:
Optionally, the chart’s background bars are colored (yellow for buy signals and fuchsia for sell signals) to enhance visual cues when signals are triggered.
Conclusion
In summary, the Liquidity Cycle Momentum Indicator provides a robust framework to analyze liquidity trends by combining global liquidity data, YoY changes, and momentum oscillation. This makes it an effective tool for traders and analysts looking to identify cyclical shifts in liquidity conditions and potential turning points in the market.
HFT Liquidity Hunter]Indicator Name: HFT Liquidity Hunter
Category: Institutional Liquidity & Momentum Analysis Tool
Purpose: Identify high-probability trading zones by combining liquidity gaps, volume anomalies, and momentum extremes.
Core Components & Functionality
1. Liquidity Gap Detection
What It Does:
Tracks price "gaps" from the previous trading session where liquidity clustered.
Plots static horizontal lines at the most significant gap levels:
Red Line: Resistance zone (highest high of prior gaps).
Teal Line: Support zone (lowest low of prior gaps).
Highlights background green/red when price is above/below these zones.
2. Volume Spike Identification
Key Feature:
Detects abnormal trading volume (>1.5x 20-period average).
Critical for confirming institutional participation at key levels.
3. Momentum Extremes
Tools Included:
RSI (14-period): Flags overbought (>65) and oversold (<35) conditions.
Stochastic Oscillator (14,3,3): Measures momentum velocity via %K line.
4. Volatility Boundaries
Dynamic Bands:
Upper Band (Orange): 2 standard deviations above 20-period SMA.
Lower Band (Blue): 2 standard deviations below 20-period SMA.
Price tends to revert toward the mean (basis line) after touching bands.
5. Volume-Weighted Average Price (VWAP)
Role: Serves as a dynamic support/resistance level for the trading session.
6. Real-Time Debug Table
Function:
Tracks 6 critical conditions for trade setups (top-right corner).
✅/❌ system shows whether each criterion is met.
Key Parameters (Customizable)
Gap Lookback Bars: Number of bars analyzed to detect liquidity gaps (default: 5).
Volume Multiplier: Sensitivity for volume spikes (1.5x = 150% of average volume).
RSI/Stochastic Thresholds: Adjust overbought/oversold levels.
Zone Resolution: Timeframe for gap validity (default: 15 minutes).
How to Interpret the Indicator
Visual Elements
Green/Red Background:
Green: Price trading above prior gap high (bullish bias).
Red: Price below prior gap low (bearish bias).
Horizontal Lines:
Teal Line: Static support (demand zone) from prior gaps.
Red Line: Static resistance (supply zone) from prior gaps.
Volatility Bands:
Price at upper band = overextended rally (potential reversal).
Price at lower band = oversold drop (potential bounce).
Purple VWAP Line:
Bullish setups favored above VWAP, bearish below.
Strategic Insights
Bullish Scenario Setup
Ideal Conditions:
Price touches Lower Band (blue line).
RSI < 35 (oversold).
Stochastic %K < 20 (momentum low).
Volume Spike (blue triangle).
Price holds Above VWAP.
Near Teal Demand Zone (gap low).
Bearish Scenario Setup
Ideal Conditions:
Price tests Upper Band (orange line).
RSI > 65 (overbought).
Stochastic %K > 80 (overextended).
Volume Spike (blue triangle).
Price below VWAP.
Near Red Supply Zone (gap high).
Pro Usage Tips
Confluence Trading: Only act when ≥5/6 debug table conditions are ✅.
Time Sensitivity: Most effective during first 2 hours of market opens.
Risk Management:
Stop Loss: 1% beyond static zones (teal/red lines).
Take Profit: Opposite volatility band or gap zone.
Asset-Specific Adjustments:
High Volatility (e.g., Crypto): Increase Volume Multiplier to 2.0x.
Range-Bound Markets: Tighten RSI thresholds to 30/70.
Why Traders Use This
Institutional Edge: Maps liquidity pools where large orders cluster.
False Signal Filter: Requires volume + momentum + volatility alignment.
Multi-Timeframe Valid: Zones auto-adjust to higher timeframe flows.
This tool is designed for traders who want to align with institutional order flow while avoiding retail market noise. Always confirm with the debug table and practice disciplined risk management.
