Gold Premium Histogram
Compares Altins1 to gram gold in turkish lira to see the deviation and suggesting when to arbitrage
指标和策略
AIE Crypto BoxAIE Crypto Box
The AIE Crypto Box highlights the previous day’s high, low, and midpoint directly on your chart.
It draws a clean, light-blue range box with optional midline, extending into the current session to help traders identify key liquidity zones, support & resistance, and breakout levels.
Designed for intraday traders and scalpers, the box provides a clear market framework for session opens, range trading, and break-and-retest setups.
Best used on lower timeframes (1m–15m).
Dual RSI Spread Strategy [Custom]
概述
这是一个综合性的动量交易工具，结合了双重 RSI 交叉系统与经典 RSI 背离检测功能。该指标旨在通过分析短期与长期动量的“剪刀差”来识别潜在的超买/超卖区域，并辅以顶底背离信号作为反转确认。
核心功能与逻辑
1. 双重 RSI 差值信号 (Dual RSI Spread) 该策略同时计算两条 RSI 曲线：
短周期 RSI (默认 13)：对价格变化反应灵敏。
长周期 RSI (默认 42)：代表长期趋势基准。
交易信号基于两条 RSI 的差值 (Spread) 生成，逻辑如下：
🟢 买入信号 (Buy)：当 长周期 RSI - 短周期 RSI > 20。这意味着短期动量严重低于长期基准，市场可能处于深度超卖状态，存在均值回归需求。
🔴 卖出信号 (Sell)：当 短周期 RSI - 长周期 RSI > 20。这意味着短期动量冲高过快，远超长期基准，市场可能过热。
2. RSI 顶底背离 (Divergence) 指标内置了经典的背离检测算法（可选择开启/关闭），应用于短周期 RSI：
Bullish Divergence (看涨背离)：价格创新低，但 RSI 底部抬高。
Bearish Divergence (看跌背离)：价格创新高，但 RSI 顶部降低。 (注意：背离功能默认关闭，请在设置中勾选 "Calculate Divergence" 开启)
3. 高度自定义
支持自定义 RSI 长度、平滑类型 (SMA/EMA) 及平滑长度。
支持自定义差值阈值（默认 20）。
完整的告警支持：可分别为差值信号和背离信号设置 TradingView 告警。
如何使用 建议将“差值信号”作为预警，结合“背离信号”作为确认。当出现“买入”标签且随后出现 Bullish 背离时，胜率通常更高。
Overview
This is a comprehensive momentum trading tool that combines a Dual RSI Cross System with Classic RSI Divergence Detection. It is designed to identify potential overbought/oversold conditions by analyzing the "spread" between short-term and long-term momentum, reinforced by divergence signals for reversal confirmation.
Key Features & Logic
1. Dual RSI Spread Signals The script calculates two RSI lines simultaneously:
Short RSI (Default 13): Sensitive to immediate price changes.
Long RSI (Default 42): Represents the longer-term baseline.
Trading signals are generated based on the Spread (Difference) between these two lines:
🟢 BUY Signal: Triggers when Long RSI - Short RSI > 20. This implies short-term momentum is significantly below the long-term baseline, suggesting a deep oversold condition and potential mean reversion.
🔴 SELL Signal: Triggers when Short RSI - Long RSI > 20. This implies short-term momentum has spiked too far above the baseline, suggesting an overheated market.
2. RSI Divergence The indicator includes a built-in divergence detection algorithm (optional) applied to the Short RSI:
Bullish Divergence: Price makes a lower low, but RSI makes a higher low.
Bearish Divergence: Price makes a higher high, but RSI makes a lower high. (Note: Divergence is disabled by default. Please check "Calculate Divergence" in the settings to enable).
3. Fully Customizable
Configurable RSI lengths, Smoothing types (SMA/EMA), and Smoothing lengths.
Adjustable Spread Threshold (Default is 20).
Full Alert Support: Set alerts specifically for Spread Signals or Divergence detections.
How to Use It is recommended to use the "Spread Signals" as an early warning system and the "Divergence Signals" as confirmation. A setup where a "BUY" spread label is followed by a Bullish Divergence line often presents a higher probability trade.
Bar-Close Confirmed SupertrendOverview
This indicator is a Supertrend-style trend follower that confirms direction changes only after a bar closes. Trend flips are determined using the previous bar’s close relative to the bands, which helps avoid intrabar changes during live candles.
How it works
Computes ATR (Average True Range)
Builds upper/lower bands using ATR and a multiplier
Updates trend direction only when a prior candle confirms a break of the band
Confirmation logic (bar-close based)
Trend direction is updated using conditions based on the previous candle, such as:
close > upper → confirm uptrend
close < lower → confirm downtrend
Because signals are confirmed on the prior bar, trend changes and markers are displayed only when confirmation exists.
Signals
Uptrend confirmation: prior candle closes above the upper band → bullish marker
Downtrend confirmation: prior candle closes below the lower band → bearish marker
Inputs
ATR Length (default 10)
ATR Multiplier (default 3.0)
Notes
This script is intended for bar-close workflows. Behavior and responsiveness may differ across markets and timeframes depending on volatility and chosen settings.
SuperTrend Filtered with Dash| Gold | ProjectSyndicate📘 ProjectSyndicate Filtered Supertrend M30 GOLD
✅ User Guide Optimized Settings for XAUUSD on M30
Indicator: Supertrend Filtered Gold
Version: 1.0
Author: ProjectSyndicate
Pine Script: v6
________________________________________
1) 👋 Introduction
Welcome to ProjectSyndicate Filtered Supertrend, an upgraded, professional-grade Supertrend system built in Pine Script v6.
This version is designed specifically to help M30 GOLD (XAUUSD) traders reduce the most common Supertrend problem: false flips in chop / low volatility.
By adding 5 powerful filters (all optional + fully adjustable), this indicator aims to keep signals clean, selective, and trend-aligned — which is ideal for GOLD’s frequent fakeouts and liquidity sweeps. 🧠✨
________________________________________
2) ⭐ Key Features What Makes It “Filtered”
✅ Pine Script v6 for speed and stability
✅ 5 Advanced Filters to reduce noise and false signals
✅ Full Customization (each filter can be turned ON/OFF)
✅ On-Chart Filter Dashboard to see what’s blocking signals in real time 📊
✅ Built-In Alerts (Buy / Sell / Direction Change) 🔔
✅ Conservative Defaults (high-quality signals out of the box)
________________________________________
________________________________________
3) 🎛 Sensitivity Control Panel
This is where the magic happens. All enabled filters use AND logic meaning:
✅ A signal prints ONLY if every enabled filter passes.
If even one fails → signal is blocked 🚫
That’s why this system feels “smart” and selective (especially on GOLD M30).
________________________________________
4.1) 📈 Trend Filter
Purpose: Blocks signals when price is drifting sideways (flat momentum).
How it works:
It checks the slope of a short-term EMA. If the EMA slope is too flat, the market is likely ranging → signals get blocked.
Recommended (M30 GOLD Optimized):
• ✅ Enable Trend Filter: ON
• ⏱ Trend Filter Period: 10
• 📏 Trend Strength Threshold (%): 0.05%
Tip for GOLD:
If you’re not getting signals during London/NY trend days, slightly lower the threshold (example 0.04%) to catch more moves. ⚡
________________________________________
4.2) ✅ Signal Confirmation
Purpose: Stops “one-candle flips” and failed breakouts (very common on XAUUSD).
How it works:
It waits for the new trend direction to remain valid for X bars before confirming.
Recommended (M30 GOLD Optimized):
•✅ Enable Signal Confirmation: ON
•🧱 Confirmation Bars: 5
Behavior example:
• Confirmation = 5 → the signal prints on the 5th candle after trend changes
This reduces fakeouts, but signals appear later (more reliable, less early). 🎯
________________________________________
4.3) 🌪 Volatility Filter
Purpose: Avoids signals during “dead” volatility phases (choppy micro-ranges).
How it works:
Measures percentage price movement over a period.
If movement is too small → no signals.
Recommended (M30 GOLD Optimized):
•✅ Enable Volatility Filter: ON
•⏱ Volatility Period: 20
•📉 Minimum Volatility Threshold: 0.25%
Tip:
If you trade only during active sessions (London/NY), you can raise this slightly to filter even harder (ex: 0.30%). 🔥
________________________________________
4.4) 💪 ADX Filter
Purpose: Confirms the market is truly trending using ADX, a classic trend-strength tool.
How it works:
If ADX is below the threshold, the market is likely non-trending → signals blocked.
Recommended (M30 GOLD Optimized):
•✅ Enable ADX Filter: ON
•⏱ ADX Period: 14
•🎚 Minimum ADX Value: 25
Rule of thumb:
📌 ADX > 25 = trend conditions
📌 ADX < 20 = likely chop / mean-reversion
________________________________________
4.5) 🧯 Signal Spacing Anti-Spam Filter
Purpose: Prevents overtrading by forcing a cooldown period between signals.
How it works:
It tracks bars since last BUY and since last SELL separately.
Recommended M30 GOLD Optimized:
•✅ Enable Signal Spacing: ON
•⏳ Minimum Bars Between Signals: 75
What 75 bars means on M30:
75 × 30 minutes = 2250 minutes = 37.5 hours
So this is intentionally strict (high quality / swing-style filtering). 🏦
If you want more signals:
Try 30–50 for active trend capture, still clean. ✅
________________________________________
5) 📊 Filter Dashboard Read This First When Confused
The dashboard shows live status of each filter.
✅ PASS (Green) = filter condition met
❌ FAIL (Red) = filter is blocking signals
Dashboard also shows:
• 📏 Trend Strength (EMA slope %)
• 💪 ADX Value
• 🔁 Current Trend UPTREND / DOWNTREND
Pro Tip 🧠:
Not getting signals? Don’t guess. Look at the dashboard — it will instantly tell you which filter is failing.
________________________________________
6) 🔔 Alerts Integration TradingView Alerts Ready
This indicator includes built-in alert conditions.
To set alerts:
1️⃣ Click Alert (top toolbar) or press Alt + A
2️⃣ In Condition, select Supertrend Advanced
3️⃣ Choose one:
📌 Alert Conditions
✅ SuperTrend Buy → Buy printed after all enabled filters PASS
✅ SuperTrend Sell → Sell printed after all enabled filters PASS
⚠️ SuperTrend Direction Change → raw Supertrend flip (ignores filters)
Recommended alert frequency:
✅ Once Per Bar Close (reduces noise + avoids repaint confusion)
________________________________________
7) 🧠 Strategy & Best Practices M30 GOLD Focused
✅ Best Use Case
This Filtered Supertrend works best when GOLD is doing one of these:
•🏃 Strong session trend (London / NY continuation)
•🔁 Post-news directional expansion
•📈 Clean structure break + follow-through
🔥 Smart Trading Workflow (Simple + Effective)
✅ Use dashboard → wait for filters PASS
✅ Align with market structure (HH/HL for buys, LH/LL for sells)
✅ Use key zones:
•Support/Resistance 🧱
•Liquidity sweeps 💧
•Order Blocks / Supply-Demand (if you use them) 📦
🧪 Tune One Filter At A Time
When optimizing:
1.Reduce Signal Spacing first
2.Then reduce Confirmation Bars
3.Only then touch volatility / ADX / trend slope
________________________________________
8) 🧩 Example Profiles Quick Presets
🥇 GOLD M30 “Optimized / Conservative” Recommended
•Trend Strength: 0.05%
•Confirmation Bars: 5
•Volatility Threshold: 0.25%
•ADX: 25
•Signal Spacing: 75
⚖️ Balanced More signals, still filtered
•Trend Strength: 0.05%
•Confirmation Bars: 2
•Volatility Threshold: 0.50%
•ADX: 25
•Signal Spacing: 10
⚡ Aggressive / Scalping Style
•Trend Strength: 0.03%
•Confirmation Bars: 1
•Volatility Threshold: 0.10%
•ADX: OFF
•Signal Spacing: 3
________________________________________
🤝 Combining Filtered Supertrend + ProjectSyndicate Order Blocks Finder SMC Boost
For SMC traders, use Order Block Finder to map clean institutional supply/demand zones (bullish OB = last bearish candle before strong bullish displacement + BOS; bearish OB = last bullish candle before strong bearish displacement + BOS, with a displacement-strength filter and auto-cleanup) and then let Filtered Supertrend act as the “permission + timing” engine
✅only take Supertrend Buy signals when price is reacting from/returning into a bullish OB (demand) in an uptrend, and Supertrend Sell signals from a bearish OB (supply) in a downtrend; entries become higher probability because you’re stacking trend bias + institutional zone + confirmation filters, with clean risk defined by the OB boundary (stop beyond the box) and logical targets toward the next opposing OB or trend continuation
Order Block Finder | Gold | ProjectSyndicate
________________________________________
9) 🧯 Troubleshooting
❓ “No signals are appearing”
Likely filters are too strict.
✅ Check dashboard → see which filter fails.
Try this order:
1.Lower Signal Spacing (75 → 50 → 30)
2.Lower Confirmation Bars (5 → 3 → 2)
3.Slightly reduce thresholds
❓ “Still too many signals”
Tighten filters:
✅ Confirmation Bars 3+
✅ Signal Spacing 100+
✅ Increase Trend Strength + ADX thresholds
❓ “Signals appear too late”
Reduce Confirmation Bars:
✅ 5 → 3 or 2
(earlier entries, slightly more risk of fakeouts)
________________________________________
✅ Conclusion
ProjectSyndicate Filtered Supertrend turns a basic trend indicator into a high-control signal engine. On GOLD M30, where fakeouts and chop are common, the 5-filter AND logic + dashboard gives you a cleaner edge — especially when combined with structure and key zones. 📈💎
10/30 EMA Ribbon (5-Min) with 50 EMAThe 10/30 EMA Ribbon is a 5-minute overlay indicator that highlights short-term trend direction and momentum using a shaded ribbon between the 10 EMA and 30 EMA. A separate 50 EMA line is included as a higher-timeframe trend filter, helping traders align entries with the dominant market direction.
ICT Flow Matrix [Ultimate]📊 Overview
ICT Flow Matrix is a comprehensive, all-in-one Smart Money Concepts (SMC) indicator built for traders who follow ICT (Inner Circle Trader) methodology. This indicator consolidates over 15 institutional trading concepts into a single, highly customizable tool—eliminating chart clutter from multiple indicators while providing deep market structure analysis.
Whether you're identifying liquidity pools, tracking order flow, or timing entries during ICT Macro windows, this indicator delivers institutional-grade analysis directly on your chart.
Pro Tip: use with ICT Market Regime Detector for clear language reads on everything.
⚡ Key Features
🎯 Price Delivery Arrays (PDAs)
Fair Value Gaps (FVG) — Automatic detection with customizable mitigation tracking (Wick Touch, 50% CE, Full Close)
Inverse FVGs (iFVG) — Identifies when FVGs fail and flip, creating new tradeable zones
Order Blocks (OB) — Last opposing candle before impulsive moves with adjustable impulse strength
Breaker Blocks (BB) — Automatically generated when Order Blocks fail
Rejection Blocks (RB) — Strong wick rejections indicating institutional defense
Volume Imbalances (VIMB) — Gaps between candle bodies showing aggressive institutional activity
📐 Market Structure & Liquidity
Market Structure Shifts (MSS) — Real-time detection of bullish/bearish structure breaks
Equal Highs/Lows (EQH/EQL) — Liquidity pools where stop losses accumulate
Buy-Side/Sell-Side Liquidity (BSL/SSL) — Swing point liquidity levels with sweep detection
Premium/Discount Zones — Visual shading showing institutional buying/selling areas
OTE Zone (61.8%-79%) — Optimal Trade Entry zone for high-probability entries
⏰ Time-Based Analysis
ICT Macro Times — All nine 30-minute algorithmic windows (02:45, 03:45, 04:45, 09:45, 10:45, 13:45, 14:45, 15:15, 15:45 NY Time)
Killzone Sessions — Asia, London, NY AM, NY PM with customizable times
Session Opens — Weekly, Monthly, Daily opening prices
Previous Period H/L — PDH/PDL, PWH/PWL, PMH/PML levels
📏 Dealing Ranges
Multi-Timeframe Ranges — 21-Day, 3-Day, Daily dealing ranges
Session Ranges — Asia, London, NY dealing ranges with equilibrium
Fibonacci Structure — 0%, 50% (EQ), 100% levels with P/D shading
🕯️ HTF Orderflow
Higher Timeframe Candles — Display up to 6 HTF candles with auto-timeframe selection
Candle Timer — Countdown to next HTF candle close
O/H/L Reference Lines — Current HTF open, high, low levels extended on chart
🎨 Visual Customization
5 Theme Presets — Dark Pro, Light Clean, Neon, Classic, Custom
Full Color Control — Customize every element individually
Zone Styles — Filled or Border Only options
Mitigation Effects — Visual fade when zones are mitigated
📋 Smart Dashboard
Real-Time Status — Structure bias, zone position, active session, OTE status
Confluence Score — Algorithmic scoring when multiple concepts align
Zone Counters — Active FVG, OB, BB, RB, VIMB, liquidity levels
3 Display Modes — Minimal, Compact, Detailed
🔔 Comprehensive Alert System
40+ Alert Conditions including:
FVG/OB/BB/RB/VIMB formation
Liquidity sweeps (EQH, EQL, BSL, SSL)
Market Structure Shifts
OTE zone entry
Macro time windows
Session opens
High confluence zones
Combo alerts (Macro + Confluence)
📖 How To Use
For Swing/Position Traders:
Enable HTF Orderflow to identify dominant trend direction
Use Dealing Ranges (3D, 21D) to find premium/discount zones
Look for OB/FVG confluence in discount (longs) or premium (shorts)
Confirm with MSS for trend alignment
For Day/Intraday Traders:
Mark the Asian Range during pre-market
Wait for London or NY AM Killzone
Enter during ICT Macro windows when price reaches FVG/OB in OTE zone
Target opposite liquidity (BSL for longs, SSL for shorts)
Confluence Trading:
Dashboard shows real-time confluence score
Score ≥ 3 indicates multiple ICT concepts aligned
Higher scores = higher probability setups
⚙️ Recommended Settings
Trading Style FVG Max OB Max History Bars HTF Candles
Scalping 3-5 2-3 100-200 3-4 Day Trading 5-8 3-5 200-400 4-5
Swing Trading 8-12 5-8 400-800 5-6
🎯 Best Practices
✅ Do:
Use HTF bias before taking LTF entries
Wait for Macro time windows for highest probability
Combine MSS + FVG/OB + OTE for A+ setups
Let mitigated zones fade (use Mitigation Fade setting)
❌ Avoid:
Trading against HTF structure
Entries outside Killzones (lower probability)
Ignoring liquidity targets
Over-cluttering chart (disable unused features)
📝 Version History
v6.0 (Current)
Complete rewrite in PineScript v6
Added ICT Macro Times with bracket/background styles
Enhanced confluence detection algorithm
Improved HTF candle rendering with multiple styles
Added Inverse FVG detection
Session-based Dealing Ranges
Performance optimizations
40+ alert conditions
⚠️ Disclaimer
This indicator is a technical analysis tool designed to visualize ICT/SMC concepts. It does not provide financial advice or guarantee profitable trades. Past performance is not indicative of future results. Always use proper risk management and trade responsibly.
💬 Support & Feedback
If you find this indicator valuable, please leave a comment or boost! Your feedback helps improve future updates.
Questions? Drop a comment below—I actively respond to all questions about the indicator's features and usage.
ICT Killzones & Pivots [TFO] + VWAP (NY Anchor)Made this for me, Enjoy it if it works for you ICT killzones + Vwap entry model from new york open with alerts
US Silver Coin Melt Value Lines (Spot-Based)This indicator calculates and plots the melt value of several historic U.S. silver coins based on the current spot price of silver. Each coin contains a known amount of silver, expressed in troy ounces. By multiplying the spot price by each coin’s silver weight, the script produces real‑time melt‑value lines that track the intrinsic metal value of each denomination.
Coins included:
- 90% Silver Dollar (Morgan/Peace)
- 90% Half Dollar
- 90% Quarter
- 90% Dime
- 40% Half Dollar (1965–1970)
- 35% Wartime Silver Nickel (1942–1945)
The indicator retrieves a dedicated silver spot symbol using request.security(), ensuring melt‑value lines remain correctly scaled regardless of the chart symbol. Each line is color‑coded and can optionally display a right‑edge label for quick identification.
Features:
- Real‑time melt‑value calculations based on spot silver
- Works on any chart symbol
- Optional right‑edge labels for each coin
- Clean, color‑matched visual layout
- Accurate silver weights for all included coins
This tool is intended for users who track bullion value, compare coin premiums, or study historical relationships between spot silver and U.S. coinage.
No external data sources, links, or promotional content are used.
Reversal Detection with Dynamic Stops - Multi-EMA ZigzagReversal Detection with Dynamic Stops - Multi-EMA Zigzag System
Description
Overview
The Reversal Detection with Dynamic Stops indicator is a comprehensive technical analysis tool that combines multiple exponential moving averages (EMAs) with an adaptive zigzag algorithm to identify significant price reversals and trend changes. This indicator is designed for active traders who need precise entry and exit signals with clear visual feedback.
Key Features
Multi-EMA Trend Detection
Triple EMA system (9, 14, 21 periods) provides robust trend identification
Dynamic bar coloring (Green = Bullish, Red = Bearish, Purple = Neutral)
Automated signal generation based on EMA alignment and price position
Adaptive Zigzag Algorithm
Configurable reversal detection using percentage, absolute value, or ATR-based thresholds
Choice between high/low or EMA-smoothed price input
Eliminates market noise while capturing significant price swings
Visual Reversal Markers
Bright, easy-to-read labels showing exact reversal prices with comma formatting
Horizontal reference lines extending from pivot points
Customizable line extension length (default 6 bars)
Labels positioned precisely at pivot highs and lows
Supply and Demand Zones (Optional)
Automatic identification of key support and resistance levels
Visual zone highlighting with translucent boxes
Configurable number of zones to display
How It Works
The indicator employs a two-stage analysis system:
Trend Identification: Three EMAs work together to determine the current market trend. When the 9 EMA is above the 14 EMA, which is above the 21 EMA, and price is above the 9 EMA, a bullish signal is generated. The inverse creates a bearish signal.
Reversal Detection: The zigzag algorithm tracks price extremes and confirms a reversal when price moves against the trend by a threshold amount (configurable as percentage, absolute value, or ATR multiple). Once confirmed, the indicator marks the pivot point with a label and horizontal line.
Recommended Settings by Timeframe
Scalping (1-5 minute charts)
Percentage Reversal: 0.5% - 1.0%
ATR Reversal: 1.5 - 2.0
Line Extension: 4-6 bars
Day Trading (15-60 minute charts)
Percentage Reversal: 1.0% - 1.5%
ATR Reversal: 2.0 - 3.0
Line Extension: 6-10 bars
Swing Trading (4H-Daily charts)
Percentage Reversal: 1.5% - 3.0%
ATR Reversal: 2.5 - 4.0
Line Extension: 10-20 bars
Input Parameters
Zigzag Settings
Method: Choose between "high_low" (actual candle extremes) or "average" (EMA-smoothed)
Percentage Reversal: Minimum percentage move to confirm reversal (default 0.01 = 1%)
Absolute Reversal: Minimum point move to confirm reversal (default 0.05)
ATR Reversal: ATR multiplier for dynamic threshold (default 2.0)
ATR Length: Period for ATR calculation (default 5)
Average Length: EMA smoothing period when using "average" method (default 5)
Visual Settings
Line Extension Bars: Number of bars to extend horizontal lines forward (default 6)
Show Supply/Demand: Toggle and style for supply/demand zones
Show Supply Demand Cloud: Enable translucent zone highlighting
EMA Settings (Fixed)
Fast EMA: 9 periods
Medium EMA: 14 periods
Slow EMA: 21 periods
Trading Applications
Entry Signals
Green reversal labels at bottoms indicate potential long entry points
Red reversal labels at tops indicate potential short entry points
Confirm with bar color alignment and overall trend direction
Exit Signals
Opposite color reversal labels suggest profit-taking opportunities
Bar color changes from green to purple or red signal weakening bullish momentum
Bar color changes from red to purple or green signal weakening bearish momentum
Stop Loss Placement
Horizontal lines serve as dynamic stop loss levels
Place stops just beyond the reversal pivot points
Adjust stops as new reversals are confirmed
Risk Management
Use multiple timeframe analysis for confirmation
Wait for bar color confirmation before entry
Avoid trading during conflicting signals (purple bars)
Best Practices
Multi-Timeframe Confirmation: Check higher timeframe trend before taking signals
Volume Verification: Combine with volume analysis for stronger confirmation
Market Context: Consider overall market conditions and key support/resistance levels
False Signals: During choppy, low-volume periods, increase reversal thresholds
Trending Markets: The indicator performs best in markets with clear trends and reversals
Alerts Available
Reversal Up: Triggers when bullish reversal is confirmed
Reversal Down: Triggers when bearish reversal is confirmed
Momentum Up: Triggers when bearish momentum weakens
Momentum Down: Triggers when bullish momentum weakens
Important Notes
This indicator repaints by design as it confirms reversals after price movement
Labels and lines are placed at historical pivot points when confirmed
The indicator works on all timeframes and markets (stocks, forex, crypto, futures)
Bar coloring provides continuous trend feedback independent of reversals
Adjust sensitivity based on volatility and timeframe
Disclaimer
This indicator is a technical analysis tool and should not be used as the sole basis for trading decisions. Always conduct your own analysis, use proper risk management, and never risk more than you can afford to lose. Past performance does not guarantee future results. The indicator repaints by nature of its reversal detection algorithm - reversals are only confirmed after price has moved the threshold amount.
Fixed Multi-TF Dashboard + Color TimerThis version changes the remaining time; if it's less than 1 minute, it's yellow, and if it's less than 30 seconds, it's red.
ICT Market Regime Detector [TradeHook]🔮 Overview
The **ICT Market Regime Detector** is an advanced market condition classifier designed to identify the current market environment and provide context-aware trading guidance. Rather than generating buy/sell signals, this indicator focuses on answering the crucial question: *"What type of market am I trading in right now?"*
Understanding market regime is fundamental to successful trading. The same strategy that works brilliantly in a trending market can fail spectacularly during consolidation. This indicator automatically classifies market conditions into one of eight distinct regimes, each requiring different trading approaches.
---
🎯 Regime Classifications
The indicator identifies these market states:
| Regime | Description | Recommended Approach |
|------------------------|--------------------------------------------------|--------------------------------------|
| *STRONG TREND* |Directional momen. w/ healthy struc| Cont.entries with OTE pullbacks |
| **WEAK TREND** | Gradual drift with retracements | Conservative Order Block entries |
| **ACCUMULATION** | Institutional buying within range | Longs near range lows |
| **DISTRIBUTION** | Institutional selling within range | Shorts near range highs |
| **CONSOLIDATION** | Tight range, low volatility squeeze | Wait for breakout |
| **EXPANSION** | Volatile breakout phase | Momentum following |
| **REVERSAL** | Structural transition period | Wait for confirmation |
| **CHOPPY** | No clear edge | **Avoid trading** |
---
⚙️ How It Works
**Trend Analysis Engine**
- Calculates ADX (Average Directional Index) using Wilder's smoothing method
- Monitors +DI/-DI for directional bias
- Detects trend health via EMA alignment
- Identifies exhaustion through RSI divergence
**Volatility Analysis Engine**
- Measures current vs historical volatility ratio
- Classifies as LOW, NORMAL, HIGH, or EXTREME
- Tracks volatility expansion/contraction phases
**Range Analysis Engine**
- Calculates dynamic support/resistance boundaries
- Tracks price position within range (0-100%)
- Detects range narrowing (squeeze) and expansion patterns
**Institutional Activity Detection**
- Volume spike identification
- Absorption candle patterns (large wicks, small body)
- Displacement candles (large body, small wicks)
- Accumulation/Distribution pattern recognition
---
🛡️ Risk Management Features
**Daily Loss Limit**
- Set maximum daily loss as percentage of account
- Visual warning when approaching limit
- Alert when limit is breached
**Maximum Daily Trades**
- Configurable trade counter per session
- Prevents overtrading
- Session reset options (NY Open, London Open, etc.)
**Trading Readiness Checklist**
- Clear regime ✓/✗
- Kill zone active ✓/✗
- HTF alignment ✓/✗
- Volatility normal ✓/✗
- Loss limit OK ✓/✗
- Trades remaining ✓/✗
---
📊 Multi-Timeframe Analysis
The indicator includes 4H timeframe regime alignment to ensure lower timeframe setups align with higher timeframe bias. Trades taken with HTF alignment historically have higher probability.
---
⏰ Kill Zone Integration
Built-in ICT Kill Zone detection:
- 🌙 Asian Session (Range Building)
- 🇬🇧 London Open (Prime Execution)
- 🇺🇸 NY AM (Prime Execution)
- 🔫 Silver Bullet (10-11 AM EST)
- 🇺🇸 NY PM (Afternoon Opportunities)
Configurable UTC offset for your timezone.
---
🎨 Visual Features
- **Regime-Colored Bars** - Instantly see current market state
- **Comprehensive Dashboard** - All metrics in one panel
- **Adjustable Table Size** - Tiny/Small/Normal/Large
- **Flexible Positioning** - Place dashboard in any corner
- **Optional Regime Labels** - Mark regime changes on chart
---
⚠️ Important Notes
1. This indicator is a **decision support tool**, not a signal generator
2. Always combine with proper price action analysis
3. Past regime identification doesn't guarantee future performance
4. Risk management settings are for tracking purposes only - actual position management should be done through your broker
5. The indicator works best on liquid markets with consistent volume data
---
📚 Educational Purpose
This indicator is designed for educational purposes to help traders understand market structure and regime classification. It implements concepts from ICT (Inner Circle Trader) methodology including:
- Market structure analysis
- Kill zone timing
- Institutional activity patterns
- Multi-timeframe confluence
---
🔧 Inputs Summary
**Master Toggles**
- Enable/Disable indicator, regime detection, recommendations, risk management, alerts
**Core Settings**
- Analysis lookback periods (short/medium/long)
- ADX thresholds for trend classification
- Volatility spike multiplier
**Risk Management**
- Max daily loss percentage
- Max daily trades
- Account size for P&L calculation
- Session reset timing
**Visualization**
- Dashboard on/off and position
- Regime zones and labels
- Bar coloring
- Table text size
---
💡 Tips for Use
1. **Don't trade CHOPPY regimes** - The indicator explicitly warns when no edge exists
2. **Respect the checklist** - Trade only when multiple conditions align
3. **Adjust ADX thresholds** - Different instruments may require fine-tuning
4. **Monitor regime duration** - Fresh regime changes often present the best opportunities
5. **Use with other TradeHook indicators** - Designed to complement the MTMGBS system
⚖️ DISCLAIMER
This indicator is for **educational and informational purposes only**. It does not constitute financial advice. Trading involves substantial risk of loss and is not suitable for all investors. Past performance is not indicative of future results. Always conduct your own analysis and consult with a qualified financial advisor before making trading decisions.
VWAP MTF 5-BandVWAP MTF Suite
Overview
The MTF Institutional VWAP Suite is a high-performance, multi-timeframe analysis tool designed for professional traders who require precise structural anchors. Built on the latest Pine Script v6 engine, this indicator allows for the simultaneous tracking of up to five independent VWAPs, each with its own volatility bands and customizable reset logic.
Unlike standard VWAP indicators that are limited to daily sessions, this suite provides institutional "magnets" across multiple horizons, allowing you to visualize where high-volume participants are positioned on a Daily, Weekly, Monthly, or Intraday basis.
Key Features
5 Independent VWAP Engines: Run up to five unique VWAPs concurrently without chart lag.
Multi-Timeframe Anchoring: Choose from hard-coded institutional pivots: Month, Week, Day, 12-Hour, 4-Hour, and 1-Hour.
Institutional Volatility Bands: Each VWAP includes an optional 1-Standard Deviation band calculated using cumulative variance logic for maximum precision.
Advanced UI Controls: Granular toggles for each instance allow you to display only the center line, only the bands, or the full shaded "value area" for any specific timeframe.
Modern Pine v6 Architecture: Utilizes the latest 2026 Pine Script optimizations, including method chaining and global-scope plot execution for a bug-free experience.
How to Use
Identify Value Clusters: When multiple VWAPs (e.g., Daily and Weekly) converge at a single price point, it creates a high-probability "Institutional Pivot" zone.
Mean Reversion: Use the 1-Standard Deviation bands to identify overextended price action. Institutional algorithms often mean-revert toward the VWAP when price reaches the exterior bands in a low-volatility environment.
Trend Confirmation: Use the slope and position of the 4-Hour or Daily VWAP to determine intraday bias. Trading above a rising VWAP confirms a "Long Gamma" or bullish trend.
Settings
Anchor Selection: Defines the starting point of the volume-weighted calculation.
Bands & Fill Toggles: Quickly clean up your chart by hiding the volatility bands or the background shading for specific timeframes.
Visual Customization: Full control over center line colors, global band colors, and label offsets to prevent text overlap on the right-hand scale.
Developer Notes
This script was optimized for the 2026 TradingView environment. It uses a custom variance-tracking function rather than the basic built-in ta.vwap to ensure that standard deviation bands remain mathematically accurate even when crossing multiple sessions or weekend gaps.
ICT iFVG Detector + Checklist + Killzones & Pivots (Merged)ZOE IFVG + Sessions + CISD (Multi-Timeframe) is an all-in-one ICT-style toolkit designed to simplify bias, timing, and execution by combining the most important market delivery concepts into one indicator.
This script merges:
🔥 1) IFVG (Inversion Fair Value Gaps)
Automatically detects and draws Inversion Fair Value Gaps
Helps highlight high-probability reversal / continuation delivery zones
Clean visual zones for entries + mitigation-based logic
⏰ 2) ICT Sessions / Killzones & Pivots
Fully integrated from the open-source ICT Killzones & Pivots toolset:
Asia, London, NY AM, NY Lunch, NY PM Killzones
Session high/low pivot lines + optional midpoint lines
Opening price lines and timestamp markers
Optional Day/Week/Month open + previous highs/lows
Day-of-week labels + session range table
This helps you time entries based on where you are in the day, and identify session liquidity levels that price reacts to.
📌 3) CISD (Change In State of Delivery) — Multi-Timeframe
Detects CISD levels using body-based market structure logic
Marks bullish and bearish CISD levels cleanly on chart
ATR Supertrend [QuantAlgo]🟢 Overview
The ATR Supertrend indicator identifies trend direction and reversal points using volatility-adjusted dynamic support and resistance levels. It combines Average True Range (ATR) volatility measurement with adaptive price bands and EMA smoothing to create trailing stop levels that automatically adjust to market conditions, helping traders and investors identify trend changes, maintain positions during trending markets, and exit when momentum shifts across multiple timeframes and asset classes.
🟢 How It Works
The indicator's core methodology lies in its volatility-adaptive band system, where dynamic support and resistance levels are calculated based on market volatility and price movement:
smoothedSource = ta.ema(source, smoothingPeriod)
atr = ta.rma(ta.tr(true), atrLength) * atrMultiplier
The script uses ATR-based bands that expand and contract with market volatility, ensuring the indicator adapts to different market conditions rather than using fixed price distances:
if trend == 1
supertrend := math.max(supertrend, smoothedSource - atr)
else
supertrend := math.min(supertrend, smoothedSource + atr)
First, it applies optional EMA smoothing to the price source to reduce noise and filter out minor price fluctuations that could trigger premature trend changes, allowing traders to focus on genuine momentum shifts.
Then, the ATR calculation measures market volatility using the Average True Range over the specified lookback period, multiplied by the user-defined factor to set the band distance:
atr = ta.rma(ta.tr(true), atrLength) * atrMultiplier
Next, dynamic trend detection occurs through a state-based system where the indicator tracks whether price is in an uptrend or downtrend, automatically adjusting the Supertrend line position:
if trend == 1
if smoothedSource < supertrend
trend := -1
supertrend := smoothedSource + atr
The Supertrend line can act as a trailing stop that follows price during trends but never moves against the trend direction, i.e., it ratchets upward with price in uptrends and ratchets downward with price in downtrends.
Finally, trend reversal signals are generated when price crosses the Supertrend line, indicating a shift in market momentum:
bullSignal = trend == 1 and trend == -1
bearSignal = trend == -1 and trend == 1
This creates a volatility-adaptive trend-following system that combines dynamic support/resistance levels with momentum confirmation, providing traders with clear directional signals and automatic stop-loss levels that adjust to changing market conditions.
🟢 Signal Interpretation
▶ Bullish Trend (Green): Price trading above Supertrend line with indicator showing bullish color, indicating established upward momentum = Long/Buy opportunities
▶ Bearish Trend (Red): Price trading below Supertrend line with indicator showing bearish color, indicating established downward momentum = Short/Sell opportunities
▶ Supertrend Line as Dynamic Support: In uptrends, the Supertrend line can act as trailing support level that rises with price, never declining = Use as potential stop-loss reference for long positions = Price holding above indicates trend strength
▶ Supertrend Line as Dynamic Resistance: In downtrends, the Supertrend line can act as trailing resistance level that falls with price, never rising = Use as potential stop-loss reference for short positions = Price holding below indicates trend weakness
🟢 Features
▶ Preconfigured Presets: Three optimized parameter sets for different trading approaches. "Default" provides balanced trend detection for swing trading on daily/4-hour charts with moderate sensitivity. "Fast Response" delivers quick trend change detection for intraday trading on 5-minute to 1-hour charts, capturing moves early with increased whipsaw potential. "Smooth Trend" focuses on strong sustained trends for position trading on daily/weekly timeframes, filtering noise to identify only major trend shifts.
▶ Built-in Alerts: Three alert conditions enable comprehensive automated monitoring of trend changes and momentum shifts. "Bullish Trend" triggers when price crosses above the Supertrend line and the trend state changes from bearish to bullish, signaling potential long entry opportunities. "Bearish Trend" activates when price crosses below the Supertrend line and the trend state changes from bullish to bearish, signaling potential short entry or long exit points. "Any Trend Change" provides a combined alert for any trend reversal regardless of direction, allowing traders to be notified of all momentum shifts without setting up separate alerts. These notifications enable traders to capitalize on trend changes and protect positions without continuous chart monitoring.
▶ Color Customization: Five visual themes (Classic, Aqua, Cosmic, Ember, Neon, plus Custom) accommodate different chart backgrounds and visual preferences, ensuring optimal contrast for identifying bullish versus bearish trends across various trading environments. The adjustable cloud fill transparency control (0-100%) allows fine-tuning of the gradient area prominence between the Supertrend line and price, with higher opacity values creating subtle background context while lower values produce bold trend zone emphasis. Optional bar coloring with adjustable transparency (0-100%) extends the trend color directly to the price bars themselves, providing immediate visual reinforcement of current trend direction without requiring reference to the Supertrend line, with transparency controls allowing users to maintain visibility of candlestick patterns while still showing trend context.
Double BB Touch Alert캔들이 기본 볼린저밴드(20,2,종가)와 사용자밴드(4,4,시가)를 동시에 닿았을 때 알람 발생시키는 스크립트
"A script that triggers an alert when the candle simultaneously touches both the default Bollinger Bands (20, 2, close) and a custom band (4, 4, open)."
AI BUY SELL BOT Indicator(KEWME)This strategy is primarily a Trend Following and Scalping strategy. It relies on the crossover of two Exponential Moving Averages (EMA) to identify short-term momentum shifts. The "AI" or "KEWME" part usually refers to the filtering logic added to standard EMAs to reduce false signals during choppy (sideways) markets.
1. Core Components
Fast EMA (Period 9): This tracks the most recent price data very closely. It reacts quickly to price changes.
Slow EMA (Period 15): This acts as the baseline or immediate support/resistance level. It reacts slower than the 9 EMA.
2. Buy Signal Logic (Long Entry)
A Buy signal is generated when the short-term momentum shifts upwards.
Crossover Condition: The EMA 9 (Fast) must cross ABOVE the EMA 15 (Slow).
Candle Confirmation: The candle causing the crossover should ideally close green (bullish) and above both EMA lines.
AI/Filter Logic:
Slope Check: The "AI" logic checks if the slope of the EMA 15 is pointing up. If the lines are flat (horizontal), the signal is often ignored to avoid sideways markets.
Volume: There should be higher than average volume during the crossover to confirm the strength of the move.
Trader's Action: Enter a Buy position immediately after the candle closes.
3. Sell Signal Logic (Short Entry)
A Sell signal is generated when the short-term momentum shifts downwards.
Crossunder Condition: The EMA 9 (Fast) must cross BELOW the EMA 15 (Slow).
Candle Confirmation: The candle causing the crossover should ideally close red (bearish) and below both EMA lines.
AI/Filter Logic:
Slope Check: The "AI" logic checks if the slope of the EMA 15 is pointing down.
Volume: Selling pressure (volume) should be visible.
Trader's Action: Enter a Sell position immediately after the candle closes.
4. The "AI" filtering (Why it is different from basic EMA)
Standard EMA crossovers often fail in "Choppy Markets" (when price moves up and down within a small range), causing losses. The KEWME/AI version usually adds these extra rules:
Range Filter: If the distance between EMA 9 and EMA 15 is very small (the lines are hugging each other), the AI suppresses the signal. It waits for the lines to "fan out" or separate.
Trend Alignment: It might check a higher timeframe (like 200 EMA). If the price is above the 200 EMA, it might only show Buy signals and hide Sell signals (Trend Filtering).
5. Exit Strategy (Stop Loss & Target)
Stop Loss (SL):
For Buy: Just below the recent Swing Low or below the EMA 15.
For Sell: Just above the recent Swing High or above the EMA 15.
Take Profit (TP): usually taken when the EMAs cross back in the opposite direction, or at a 1:1.5 Risk-Reward ratio.
3 minutes ago
Release Notes
This strategy is primarily a Trend Following and Scalping strategy. It relies on the crossover of two Exponential Moving Averages (EMA) to identify short-term momentum shifts. The "AI" or "KEWME" part usually refers to the filtering logic added to standard EMAs to reduce false signals during choppy (sideways) markets.
1. Core Components
Fast EMA (Period 9): This tracks the most recent price data very closely. It reacts quickly to price changes.
Slow EMA (Period 15): This acts as the baseline or immediate support/resistance level. It reacts slower than the 9 EMA.
2. Buy Signal Logic (Long Entry)
A Buy signal is generated when the short-term momentum shifts upwards.
Crossover Condition: The EMA 9 (Fast) must cross ABOVE the EMA 15 (Slow).
Candle Confirmation: The candle causing the crossover should ideally close green (bullish) and above both EMA lines.
AI/Filter Logic:
Slope Check: The "AI" logic checks if the slope of the EMA 15 is pointing up. If the lines are flat (horizontal), the signal is often ignored to avoid sideways markets.
Volume: There should be higher than average volume during the crossover to confirm the strength of the move.
Trader's Action: Enter a Buy position immediately after the candle closes.
3. Sell Signal Logic (Short Entry)
A Sell signal is generated when the short-term momentum shifts downwards.
Crossunder Condition: The EMA 9 (Fast) must cross BELOW the EMA 15 (Slow).
Candle Confirmation: The candle causing the crossover should ideally close red (bearish) and below both EMA lines.
AI/Filter Logic:
Slope Check: The "AI" logic checks if the slope of the EMA 15 is pointing down.
Volume: Selling pressure (volume) should be visible.
Trader's Action: Enter a Sell position immediately after the candle closes.
4. The "AI" filtering (Why it is different from basic EMA)
Standard EMA crossovers often fail in "Choppy Markets" (when price moves up and down within a small range), causing losses. The KEWME/AI version usually adds these extra rules:
Range Filter: If the distance between EMA 9 and EMA 15 is very small (the lines are hugging each other), the AI suppresses the signal. It waits for the lines to "fan out" or separate.
Trend Alignment: It might check a higher timeframe (like 200 EMA). If the price is above the 200 EMA, it might only show Buy signals and hide Sell signals (Trend Filtering).
5. Exit Strategy (Stop Loss & Target)
Stop Loss (SL):
For Buy: Just below the recent Swing Low or below the EMA 15.
For Sell: Just above the recent Swing High or above the EMA 15.
Take Profit (TP): usually taken when the EMAs cross back in the opposite direction, or at a 1:1.5 Risk-Reward ratio.
Buy / Sell Volume LabelsINDICATOR NAME:
Buy/Sell Volume Labels
DESCRIPTION:
Buy/Sell Volume Labels displays real-time buying and selling volume with dynamic color-coded labels that highlight market dominance. The indicator automatically emphasizes the dominant side (buy or sell) with bright green or red backgrounds, while the non-dominant side fades to gray for instant visual clarity.
Key Features:
- Dynamic Color Coding: Dominant volume side displays in bright green (buy) or red (sell), non-dominant side in gray
- Trend Indicator: Optional "Bullish Trend", "Bearish Trend", or "Neutral" label shows current market bias
- Flexible Display Options: Choose to show percentages only, volume only, or both
- Customizable Position: Place labels anywhere on chart (top, center, bottom; left, center, right)
- Adjustable Size: Six size options from Tiny to Huge, including Auto
- Lookback Period: Calculate volume for current bar or sum across multiple bars
- Neutral Threshold: Define when market is considered neutral vs. trending
How It Works:
- The indicator calculates buying and selling volume based on where price closes within each bar's range. When buying volume dominates, the Buy label turns bright green with black text while the Sell label turns gray. When selling dominates, the Sell label turns bright red with white text while the Buy label turns gray. This makes it immediately obvious which side controls the market.
Perfect For:
- Day traders and scalpers on futures (/MNQ, /ES, /NQ)
- Identifying accumulation vs. distribution phases
- Confirming trend strength and reversals
- Quick visual assessment of market pressure
- All timeframes from tick charts to daily
Settings:
- Header location (9 positions)
- Display mode (Volume, Percent- age, or Both)
- Table size (Tiny to Huge + Auto)
- Lookback period (bars)
- Trend label toggle
- Neutral threshold percentage
Created by NPR21 for the TradingView community.
Infinity Trader TDSTDS – Trend Direction Structure Strategy
TDS (Trend Direction Structure) is a rule-based trading strategy that focuses on market structure and directional bias to identify high-probability trade setups.
The strategy is designed to trade only in the direction of the confirmed trend, reducing false entries and improving consistency.
🔹 Core Principle
Markets move in trends and structures.
TDS identifies:
Current trend direction
Internal structure continuations
Confirmed trend reversals
Trades are executed only when structure and direction align.
🔹 Trend Classification
Buy Trend – Higher highs and higher lows
Sell Trend – Lower highs and lower lows
🔹 Structure Signals Used
Internal Continuation
ICB (Internal Continuation Buy)
Entry during pullback in a buy trend
ICS (Internal Continuation Sell)
Entry during pullback in a sell trend
Internal Change of Trend
iCBT – Early change to buy trend
iCST – Early change to sell trend
External Change of Trend
CBT – Confirmed buy trend reversal
CST – Confirmed sell trend reversal
🔹 Entry Logic
Trade only after structure confirmation
Entries occur on pullbacks or continuation zones
Avoid ranging and low-momentum markets
🔹 Risk Management
Structure-based Stop Loss
Fixed or dynamic Take Profit
Risk-to-Reward ratio typically 1:2 or higher
🔹 Best Suitable For
Forex (major pairs like EUR/USD)
Intraday & swing trading
Manual trading and AI/robot automation
🔹 Objective
TDS aims to deliver consistent profits, controlled drawdowns, and disciplined execution by following trend direction and market structure.
