开始

指标和策略

Structure Pivot (LL-HL / HH-LH)Structure Pivot (LL-HL / HH-LH) - Indicator Guide This indicator scans for market structure pivot patterns—specifically the bullish Higher Low (LL–HL) and the bearish Lower High (HH–LH) —across multiple lengths simultaneously. It automatically selects the most optimal pattern based on a "Priority Mode" and plots the structure and breakout/breakdown levels on the chart. 1. Basic Calculation Method The indicator builds upon TradingView’s ta.pivotlow and ta.pivothigh functions to identify structural points. Bullish Structure (LL–HL) 1.LL (Lowest Low): A standard Pivot Low is identified. 2.HL (Higher Low): A subsequent Pivot Low forms higher than the previous LL. This completes the setup. 3.Pivot Line (Resistance): The indicator finds the highest price (High) that occurred between the LL and the HL. This level becomes the breakout trigger. Bearish Structure (HH–LH) 1.HH (Highest High): A standard Pivot High is identified. 2.LH (Lower High): A subsequent Pivot High forms lower than the previous HH. This completes the setup. 3.Pivot Line (Support): The indicator finds the lowest price (Low) that occurred between the HH and the LH. This level becomes the breakdown trigger. 2. Multi-Length Scanning Unlike standard indicators that use a single fixed length (e.g., Length = 5), this indicator scans a range of lengths simultaneously. ・Settings: Defined by Min Length and Max Length. ・Mechanism: If set to Min=2 and Max=10, the indicator internally runs 9 separate calculations (Length 2 through 10) in parallel. This allows it to capture everything from small, short-term pullbacks to larger, significant structural pivots without manual adjustment. 3. Priority Mode System Since multiple lengths are scanned, multiple valid patterns may appear at the same time. The Priority Mode determines which single pattern is the "winner" and gets displayed. A. Tightest Structure (Default) ・For Bullish (Long): Selects the pattern with the lowest Pivot Line (Resistance). ・For Bearish (Short): Selects the pattern with the highest Pivot Line (Support). ・Advantage: It finds the "tightest" contraction (like a VCP). This offers the entry point closest to the stop-loss level, providing the best Risk/Reward ratio. B. Longest Length ・Selects the pattern detected by the longest length setting. ・Advantage: Focuses on major structural points, filtering out short-term noise. Best for trend confirmation. C. Shortest Length ・Selects the pattern detected by the shortest length setting. ・Advantage: Extremely sensitive. Best for scalping or catching immediate micro-pullbacks. 4. Real-Time Logic & Features Structure Invalidation (Failure) ・Bullish: If the current price drops below the HL (the support of the structure), the setup is considered failed. ・Bearish: If the current price rises above the LH (the resistance of the structure), the setup is considered failed. ・Result: All lines and labels for that structure are immediately deleted to keep the chart clean. Pivot Line Extension ・As long as the structure remains valid (price hasn't violated the HL or LH), the Pivot Line extends to the right, acting as a live reference for breakouts or breakdowns. Alerts ・Bullish Breakout: Triggered when the Close price crosses over the Pivot Line. ・Bearish Breakdown: Triggered when the Close price crosses under the Pivot Line.
Pine Script®指标
由oratnek提供
3
NeoChartLabs POCOne of our Favorite Indicators - the High Time Frame Point of Control with a Volume Profile. Shout out to p2pasta for the original script, we updated to v6. Currently included: Monthly, 3 months and 6 months. /* DEFINITION */ Point Of Control (= POC) is a price level at which the heaviest volumes were traded. Value Area High/Low (=VAH/VAL) is a range of prices where the majority of trading volume took place. Naturally, Value Area High being the top price level and Value Area Low being the lowest. POC always is between the two. /* HOW TO TRADE WITH THIS INDICATOR */ The basis for POC is determining bias on whichever timeframe you choose. 1. Identify a POC on the timeframe of your choosing. /* If you choose a "low" timeframe (monthly here) then make sure to look at the higher timeframes to see how it is playing against a higher timeframe POC. 2. When the price is moving away from the POC (either to the upside or downside) this will confirm or invalidate the trade. 3. You can now enter the trade on bias or wait for a retest of the same POC.
Pine Script®指标
由NeoChartLabs提供
Prime -Hub Prime -Hub is a comprehensive, all-in-one technical analysis toolkit designed for professional Intraday and Swing traders on Nifty, BankNifty, and Stocks. This script consolidates three powerful institutional logic systems into a single, clean interface, replacing the need for multiple indicators. Disclaimer: This tool is for educational and analytical purposes only. Past performance does not guarantee future results. Trading involves substantial risk.
Pine Script®指标
由rmaniyarasan1982提供
MADD Monkey Pro DMCx Directional Momentum and Confluence EngineMadd Monkey Pro DMCx is a bias and momentum indicator that helps intraday traders read short-term direction and the strength of current moves. It is designed to provide structured context so you can decide when conditions support your ideas and when they do not. Purpose DMCx is built to help you answer: What is the current directional bias on this chart? Is momentum supporting that direction or fading? Does the current environment meet the confluence conditions you have defined? Core components (high-level logic) DMCx combines several elements: Directional engine – evaluates recent price behavior to classify conditions as bullish, bearish or neutral. Momentum and volatility engine – distinguishes between stronger impulsive moves and slower or less convincing movement. Confluence layer – optional filters requiring agreement between direction, momentum and other conditions before highlighting a setup. Signal quality tagging – internal tagging that lets you treat some conditions as higher or lower quality, depending on your configuration. These components are presented through chart markers and a compact status panel summarizing the current bias and momentum state. Key features Clear bias / regime read to show whether price is trending up, trending down or in more neutral conditions. Momentum and volatility context to help distinguish between strong pushes and weaker phases. Optional confluence filters so only aligned conditions are highlighted. A status panel that provides a high-level snapshot of bias, momentum and simple tallies based on how you interpret the output. Modular controls allowing you to toggle key visuals (signals, labels, panel) on or off to match your preferred chart layout. Suggested usage Symbols and timeframes: Can be used on XAUUSD, FX pairs, indices and other liquid instruments. Intraday frames like 15m, 5m or 1h are common use cases, but you may explore higher or lower timeframes according to your own testing. Define your higher timeframe bias and important price levels using your own methods. Use DMCx to check: Whether short-term direction is aligned with your idea. Whether momentum supports that view or suggests caution. Consider taking trades only when your setup and the DMCx context agree, and you have clear rules for entry, stop loss and target. Treat the readings as context, not as standalone entry or exit signals. Notes and limitations DMCx does not repaint closed bars, but its bias and momentum states update as new data appears. This is normal for any real-time context tool. Any performance-style interpretation of the output depends completely on how you choose to use it. The script does not guarantee results. Risk disclaimer This script is provided for informational and educational purposes only. It does not constitute financial advice, investment advice or a solicitation to buy or sell any financial instrument. Trading and investing in financial markets involve significant risk, and you can lose more than your initial investment. Past performance and historical behavior do not guarantee future results. By using Madd Monkey Pro DMCx, you accept full responsibility for your own trading decisions and outcomes. The author is not liable for any loss or damage arising from the use of this script.
Pine Script®指标
由maddmonkeypro提供
Madd Monkey Pro MKDx Leg and Zone Mapping EngineMadd Monkey Pro MKDx is a structure and zone mapping tool for intraday traders who prefer clear, rule-based legs and focused entry areas instead of constantly redrawing levels by hand. The script was developed and tested mainly on XAUUSD (Gold) using 15-minute and 5-minute charts. You can apply it to other symbols and timeframes at your own discretion, but you should always test and adapt settings for each market. Purpose MKDx is designed to help answer three practical questions: Where is the current impulsive leg in price? Where is the main pullback or entry zone inside that leg? How do trades taken from those zones behave over time, according to your own rules? Core components (high-level logic) MKDx combines several modules: Leg detection engine – tracks clear bullish and bearish displacement moves and maintains the currently active leg as new bars confirm structure. Zone engine – defines a focused “entry band” within each leg, using a premium/discount style layout rather than shading the entire range. Trend and momentum filters – optional filters to help you stay aligned with broader direction and avoid trading every leg blindly. Confluence checks – additional conditions that a leg must pass before being considered valid by the indicator. Optional SL / TP references – tools that can mark guideline stop and target areas relative to each leg and zone. These components are displayed as leg markers, shaded or outlined zones, optional horizontal reference lines, and simple long/short markers where your chosen filters agree. Key features Automatic mapping of bullish and bearish legs that updates as new highs or lows are confirmed. Highlighted entry zones inside each active leg, instead of persistent bands that cover the entire chart. Configurable filters for trend, momentum and confluence so you can adjust how selective or permissive the signals are. Optional status panel showing approximate counts of outcomes (for example, how many legs would have reached a rough target or stop under your interpretation). Independent toggles for leg lines, zones, markers, labels and the panel so you can keep charts clean. Suggested usage Timeframes: Originally tuned for XAUUSD on the 15m and 5m charts. Other timeframes and instruments require your own forward testing. Use MKDx to: Identify the current active leg and its direction. Watch for price returning into the mapped zone. Combine that context with your own entry logic (price action, candlestick patterns, sessions, etc.) and risk rules. MKDx does not open or manage trades. Position sizing, stop placement, targets and daily limits are entirely your responsibility. Notes and limitations Closed bars are not repainted, but leg and zone definitions can change as structure develops. This is expected behavior for any structure-based approach. All arrows, zones and counts are context tools only. They are not trade recommendations or performance guarantees. Past behavior of any configuration does not imply similar results in the future. Risk disclaimer This script is provided for informational and educational purposes only. It does not constitute financial advice or a recommendation to buy or sell any financial instrument. Trading and investing involve significant risk, and you can lose more than your initial investment. Past performance and historical behavior do not guarantee future results. By using Madd Monkey Pro MKDx, you accept full responsibility for your own trading decisions and outcomes. The author is not liable for any loss or damage arising from the use of this script.
Pine Script®指标
由maddmonkeypro提供
NeoChartLabs McGinley DynamicOne of our Favorite Indicators - the McGinley Dynamic The MGD is adaptive, it speeds up for crypto and slows down for stocks, this version turns green when bullish and red when bearish - this is a fast indicator so the colors are more reliable on higher time frames. The McGinley Dynamic is a smart, adaptive moving average technical indicator created by John R. McGinley, designed to overcome the lag and whipsaw issues of traditional moving averages (MAs) by automatically adjusting to varying market speeds, resulting in a smoother, more responsive line that tracks price action better, acting as a reliable trend-following tool or baseline in financial charts. Shout out to LOXX for the original script, updated to v6.
Pine Script®指标
由NeoChartLabs提供
RSI Dip Reversal Pro ScannerRSI Upside Reversal Scanner (High Accuracy) This indicator is designed to detect early-stage upside reversals by identifying when RSI crosses upward from oversold levels while the price remains positioned in the lower portion of its recent range. It combines momentum shift with price location analysis to produce highly reliable reversal signals. It uses 3 primary filters: RSI Oversold Cross: RSI must cross upward from the oversold threshold (default 30). Price in Bottom Range: Price must be located within the lower 40% of the last 20-bar range, indicating a discount zone. Overbought Protection: RSI must stay below the ceiling level (default 75) to prevent signals near top exhaustion. When all criteria are met, the indicator plots a “GİRİŞ” (ENTRY) label below the candle. This tool is ideal for: Identifying accurate dip-buy zones Capturing trend reversals early Optimizing swing and scalp entries Feeding systematic trading models or bots It performs well on short- and mid-term timeframes.
Pine Script®指标
由baki1226提供
Delbert SetupDelbert Setup is a clean, time-based session framework designed for traders who follow PNY, NYO, and evening market structure in IST (Asia/Kolkata) time. It highlights key intra-day timing, PNY/NYO session highs/lows, and important schedule-based vertical markers for structured intraday planning. 🔍 What This Indicator Shows 1. PNY Session (09:30–18:55 IST) Automatically draws: PNY High (PNYH) PNY Low (PNYL) Thin solid levels from session start to session end Vertical dotted lines at PNY open & close with timestamp labels 2. NYO Session (19:00–19:55 IST) Displays: NYOH / NYOL levels NYO open/close vertical dotted lines Session-only range levels (thin solid 1px) 3. 00:30 IST Marker A dedicated vertical dotted line at 00:30 IST, useful for: Timing bias Session transitions Trade management cutoffs 4. Optional NQ Reference Levels If enabled, the script plots: NQ open price at NYO start Adjustable ± offset bands (default 100 points) These assist traders correlating NQ behavior with their instrument. 🎨 Visual Style All vertical lines → thinnest dotted black PNY / NYO highs & lows → thin solid levels (1px) Time labels → red, size-small, placed above chart structure Designed for clean visual structure without clutter 🕒 Why IST Timing? This indicator is tailored for traders who operate in India Standard Time, aligning PNY/NYO with local clock time without mental conversion. All calculations use Asia/Kolkata timezone internally. ⚠ Notes This indicator does not generate buy/sell signals. It is meant as a market structure & session map, helping traders reference key liquidity and timing zones. Works on any timeframe and across all assets. ✔ Ideal For Traders Who Use: Session-based models (PNY, NYO, Pre-New York) Liquidity sweeps near session highs/lows Timing-based bias Correlation models with NQ
Pine Script®指标
由delbert_trading提供
indicator("MouNoOkite_InitialMove_Screener", overlay=true)//@version=5 indicator("猛の掟・初動スクリーナー（5EMA×MACD×出来高×ローソク）", overlay=true, max_labels_count=500) // ========================= // Inputs // ========================= emaSLen = input.int(5, "EMA Short (5)") emaMLen = input.int(13, "EMA Mid (13)") emaLLen = input.int(26, "EMA Long (26)") macdFast = input.int(12, "MACD Fast") macdSlow = input.int(26, "MACD Slow") macdSignal = input.int(9, "MACD Signal") volLookback = input.int(5, "出来高平均（日数）", minval=1) volMinRatio = input.float(1.3, "出来高倍率(初動点灯)", step=0.1) volStrong = input.float(1.5, "出来高倍率(本物初動)", step=0.1) volMaxRatio = input.float(2.0, "出来高倍率(上限目安)", step=0.1) wickBodyMult = input.float(2.0, "ピンバー判定: 下ヒゲ >= (実体×倍率)", step=0.1) pivotLen = input.int(20, "直近高値/レジスタンス判定のLookback", minval=5) pullMinPct = input.float(5.0, "押し目最小(%)", step=0.1) pullMaxPct = input.float(15.0, "押し目最大(%)", step=0.1) showDebug = input.bool(true, "デバッグ表示（条件チェック）") // ========================= // EMA // ========================= emaS = ta.ema(close, emaSLen) emaM = ta.ema(close, emaMLen) emaL = ta.ema(close, emaLLen) plot(emaS, color=color.new(color.yellow, 0), title="EMA 5") plot(emaM, color=color.new(color.blue, 0), title="EMA 13") plot(emaL, color=color.new(color.orange, 0), title="EMA 26") emaUpS = emaS > emaS emaUpM = emaM > emaM emaUpL = emaL > emaL // 26EMA上に2日定着 above26_2days = close > emaL and close > emaL // 黄金隊列 goldenOrder = emaS > emaM and emaM > emaL // ========================= // MACD // ========================= = ta.macd(close, macdFast, macdSlow, macdSignal) // ヒストグラム縮小（マイナス圏で上向きの準備）も見たい場合の例 histShrinking = math.abs(macdHist) < math.abs(macdHist ) histUp = macdHist > macdHist // ゼロライン上でGC（最終シグナル） macdGCAboveZero = ta.crossover(macdLine, macdSig) and macdLine > 0 and macdSig > 0 // 参考：ゼロ直下で上昇方向（勢い準備） macdRisingNearZero = (macdLine < 0) and (macdLine > macdLine ) and (math.abs(macdLine) <= math.abs(0.5)) // ========================= // Volume // ========================= volMA = ta.sma(volume, volLookback) volRatio = volMA > 0 ? (volume / volMA) : na volumeOK = volRatio >= volMinRatio and volRatio <= volMaxRatio volumeStrongOK = volRatio >= volStrong // ========================= // Candle patterns // ========================= body = math.abs(close - open) upperWick = high - math.max(open, close) lowerWick = math.min(open, close) - low // 長い下ヒゲ（ピンバー系）: 実体が小さく、下ヒゲが優位 pinbar = (lowerWick >= wickBodyMult * body) and (lowerWick > upperWick) and (close >= open) // 陽線包み足（前日陰線を包む） bullEngulf = close > open and close < open and close >= open and open <= close // 5EMA・13EMA を貫く大陽線（勢い） bigBull = close > open and open < emaM and close > emaS and (body > ta.sma(body, 20)) // “相対的に大きい”目安 candleOK = pinbar or bullEngulf or bigBull // ========================= // 押し目 (-5%〜-15%) & レジブレ後 // ========================= recentHigh = ta.highest(high, pivotLen) pullbackPct = recentHigh > 0 ? (recentHigh - close) / recentHigh * 100.0 : na pullbackOK = pullbackPct >= pullMinPct and pullbackPct <= pullMaxPct // “レジスタンスブレイク”簡易定義：直近pivotLen高値を一度上抜いている // → その後に押し目位置にいる（現在が押し目） brokeResistance = ta.crossover(close, recentHigh ) or (close > recentHigh ) afterBreakPull = brokeResistance or brokeResistance or brokeResistance or brokeResistance or brokeResistance breakThenPullOK = afterBreakPull and pullbackOK // ========================= // 最終三点シグナル（ヒゲ × 出来高 × MACD） // ========================= final3 = pinbar and macdGCAboveZero and volumeStrongOK // ========================= // 猛の掟 8条件チェック（1つでも欠けたら「見送り」） // ========================= // 1) 5EMA↑ 13EMA↑ 26EMA↑ cond1 = emaUpS and emaUpM and emaUpL // 2) 5>13>26 黄金隊列 cond2 = goldenOrder // 3) ローソク足が26EMA上に2日定着 cond3 = above26_2days // 4) MACD(12,26,9) ゼロライン上でGC cond4 = macdGCAboveZero // 5) 出来高が直近5日平均の1.3〜2.0倍 cond5 = volumeOK // 6) ピンバー or 包み足 or 大陽線 cond6 = candleOK // 7) 押し目 -5〜15% cond7 = pullbackOK // 8) レジスタンスブレイク後の押し目 cond8 = breakThenPullOK all8 = cond1 and cond2 and cond3 and cond4 and cond5 and cond6 and cond7 and cond8 // ========================= // 判定（2択のみ） // ========================= isBuy = all8 and final3 decision = isBuy ? "買い" : "見送り" // ========================= // 表示 // ========================= plotshape(isBuy, title="BUY", style=shape.labelup, text="買い", color=color.new(color.lime, 0), textcolor=color.black, location=location.belowbar, size=size.small) plotshape((not isBuy) and all8, title="ALL8_OK_but_noFinal3", style=shape.labelup, text="8条件OK (最終3未)", color=color.new(color.yellow, 0), textcolor=color.black, location=location.belowbar, size=size.tiny) // デバッグ（8項目チェック結果） if showDebug and barstate.islast var label dbg = na label.delete(dbg) txt = "【8項目チェック】 " + "1 EMA全上向き: " + (cond1 ? "達成" : "未達") + " " + "2 黄金隊列: " + (cond2 ? "達成" : "未達") + " " + "3 26EMA上2日: " + (cond3 ? "達成" : "未達") + " " + "4 MACDゼロ上GC: " + (cond4 ? "達成" : "未達") + " " + "5 出来高1.3-2.0: "+ (cond5 ? "達成" : "未達") + " " + "6 ローソク条件: " + (cond6 ? "達成" : "未達") + " " + "7 押し目5-15%: " + (cond7 ? "達成" : "未達") + " " + "8 ブレイク後押し目: " + (cond8 ? "達成" : "未達") + " " + "最終三点(ヒゲ×出来高×MACD): " + (final3 ? "成立" : "未成立") + " " + "判定: " + decision dbg := label.new(bar_index, high, txt, style=label.style_label_left, textcolor=color.white, color=color.new(color.black, 0)) // アラート alertcondition(isBuy, title="猛の掟 BUY", message="猛の掟: 買いシグナル（8条件＋最終三点）")
Pine Script®指标
由morishima0ut6b提供
MTF Dashboard Pro v4 Institutional EditionMTF Dashboard Pro v4 – 2026 Institutional Multi-Timeframe Bias Engine A high-performance, professional-grade multi-timeframe dashboard designed for scalpers, intraday traders, and institutional smart-money practitioners. Version 4 introduces a cleaner architecture, faster execution, and improved signal alignment across all major trend, momentum, and confirmation tools. Core Features Multi-Timeframe EMA Trend (9/21) – Fast intraday trend detection 200-MA System with Threshold Logic – Dynamic positional bias Daily VWAP Engine (Optional Reset) SuperTrend Engine with Corrected Direction Model RSI, MACD, ADX, Alligator, Stochastic – Momentum + Confirmation suite PH/PL Bias (Previous Day High/Low) – Institutional liquidity context 11-Signal Institutional Bias Score Bias Classification: Strong Bull → Strong Bear Multi-TF Alerts for Strong Bull / Strong Bear Optimized HUD Table – Lightweight, fast, and resource-efficient Who Is This For? Scalpers, intraday traders, swing traders, and SMC/ICT-based traders who need: Clear multi-timeframe alignment Instant trend + momentum confirmation Market structure bias Liquidity context (PH/PL) A single, clean, real-time dashboard The indicator is designed to support high-speed decision making in volatile conditions and institutional trading environments. Developed by - Sachin Yashwant Thakare Author: Sachin Yashwant Thakare Edition: 2026 Premium Release Rights: © 2026 All Rights Reserved
Pine Script®指标
由sachinthakare1971提供
BTC Macro Regime & Stoch RSI SignalThis script is designed for traders who want to combine macro context with precise momentum timing on Bitcoin. Instead of looking at isolated indicators, it aggregates several independent data streams into a single bias score and then uses a stochastic RSI engine to time entries and exits. The goal is simple: Filter the market into long / neutral / short regimes, Only act when momentum aligns with the current regime, Avoid overtrading in noisy or highly leveraged conditions. What the indicator does (conceptually) The script builds an internal “macro + momentum score” for BTC by combining: Cycle / valuation regime Tracks where BTC sits in the broader cycle (discount vs overheating) and whether conditions are favorable for medium-term upside or downside. Network & miner trend regime Monitors the health and trend of network activity / miners to detect stress, capitulation and recovery phases. Derivatives / leverage regime Looks at futures positioning to identify when leverage is excessive or has been flushed out, acting as a risk filter rather than a standalone entry trigger. Price momentum (Stochastic RSI) Uses a Stochastic RSI engine on price to capture short-term swings and turning points, especially at extremes. All of this is compressed into a single score between −1 and +1, where: Values near +1 indicate a supportive macro environment with bullish momentum, Values near −1 indicate a risk-off / bearish environment, Values around 0 indicate indecision or transition. The exact construction, weights and thresholds are handled internally by the script. Signals & visuals The indicator provides: A Total Score line: Above a configurable upper level → long bias Below a configurable lower level → short bias In between → neutral / low conviction Background shading: Green tint when the regime favors long setups Red tint when the regime favors short setups Stochastic RSI panel: K and D lines plotted on a 0–100 scale The 0–10 zone is highlighted in green (deep oversold) The 90–100 zone is highlighted in red (deep overbought) Extreme cross markers: A green marker when Stoch RSI crosses up in the lower extreme zone A red marker when Stoch RSI crosses down in the upper extreme zone Entry / exit markers (optional visual guide): Long entry markers appear when: The macro score is in long-bias territory, and Stoch RSI confirms an upward cross from oversold conditions. Short entry markers appear when: The macro score is in short-bias territory, and Stoch RSI confirms a downward cross from overbought conditions. Exit markers appear when momentum flips against the active bias or the macro score degrades. These markers are guides, not mechanical trading rules. How to use it Typical workflow: Start with the Total Score Use it as a regime filter: Only look for longs when the score shows a sustained positive bias. Only look for shorts when the score shows a sustained negative bias. Then look at Stoch RSI Use it to time pullbacks and reversals within the current bias: In a long bias → favor bullish crosses from low levels. In a short bias → favor bearish crosses from high levels. Respect leverage conditions When the internal risk engine flags crowded leverage, treat signals more conservatively: Reduce size, Tighten risk, Or skip trades entirely if conditions look unstable. This script is not meant to create a high-frequency scalping system. It is a context + timing framework for swing and positional trades on BTC. Timeframes The macro components are designed with higher-timeframe logic in mind. Recommended: Use 1D as the primary perspective for the bias, Optionally refine entries on 4H if you want more precise timing. Important notes & disclaimer This tool is specifically tuned for Bitcoin, not for altcoins. The internal logic, data processing and weighting are intentionally abstracted to keep the focus on the final score and signals rather than on raw formulas. As with any indicator, it can produce false signals and whipsaws, especially during violent news events or regime shifts. This is not financial advice. Always combine the script with your own analysis, sound risk management and position sizing. Use at your own risk.
Pine Script®指标
由Metina提供
ORB + FVG + PDH/PDL ORB + FVG + PDH/PDL is an all-in-one day-trading overlay that plots: Opening Range (ORB) high/low with optional box and extension Fair Value Gaps (FVG) with optional “unmitigated” levels + mitigation lines Previous Day High/Low history (PDH/PDL) drawn as one-day segments (yesterday’s levels plotted across today’s session only) Includes presets (ORB only / FVG only / Both) and optional alerts for ORB touches, ORB break + retest, FVG entry, and PDH/PDL touches.
Pine Script®指标
由JDJerde提供
VD FRFS PRO VD FRFS PRO This trader centric, multi-functional indicator built on **Pine Script™ v6** that seamlessly integrates four of the most critical price and volatility tools into a single overlay. Designed for day traders, swing traders, and institutional analysts, this tool provides a comprehensive view of volatility, trend, volume-based pricing, and structure, all without chart clutter. Overview & Concept The VD FRFS PRO is engineered for efficiency and clarity. Instead of layering four separate indicators, which can lead to performance issues and confusion, this script combines the calculations into one, allowing traders to execute complex technical analysis rapidly. It serves as a powerful foundation for strategies that require: 1. Volatility Assessment (Bollinger Bands) 2. Volume-Weighted Fair Value (VWAP) 3. Price Structure & Swings (Zig Zag) 4. Dynamic Trend Filtering (Configurable SMA) Customization & Settings All inputs are logically grouped for ease of use in the indicator's settings menu. Bollinger Bands BB Length: Period for the Basis SMA and StdDev calculation (default: 20). BB Source: Price series for the calculation (default: `close`). BB StdDev Multiplier: Multiplier for the Standard Deviation (default: 2.0). BB Offset: Shifts the bands horizontally (default: 0). VWAP Settings VWAP Source: Price series for the VWAP calculation (default: `hlc3`). Zig Zag Settings Zig Zag High/Low Length: Lookback period for determining swing points (default: 3). SMA Settings SMA Period: Lookback period for the configurable SMA (default: 20). Show SMA: Checkbox to toggle the visibility of this SMA (default: `true`). Disclaimer Feel free to reach out for suggestions and modification requests.
Pine Script®指标
由vishaldhawan82提供
Shiori TFGI Lite Technical Fear and Greed Index (Open Source)Shiori’s TFGI Lite Technical Fear & Greed Index (Open Source) --- English — Official Description Shiori’s TFGI Lite is an open-source Technical Fear & Greed Index designed to help traders and investors understand market emotion, not predict price. Instead of generating buy or sell signals, this indicator focuses on answering a calmer, more important question: > Is the market emotionally stretched away from its own historical balance? TFGI Lite combines three well-known technical dimensions — volatility, price deviation, and momentum — and normalizes them into a single, intuitive 0–100 sentiment scale. What This Indicator Is * A market context tool, not a trading signal * A way to observe emotional extremes and misalignment * Designed for any asset, any timeframe * Fully open source, transparent and adjustable Core Components * Fear Factor: Short-term vs long-term ATR ratio with logarithmic compression * Greed Factor: Price Z-score with tanh-based normalization * Momentum Factor: Classic RSI as emotional momentum These factors are blended and gently smoothed to form the current sentiment level. Historical Baseline & Deviation TFGI Lite introduces a historical baseline concept: * The baseline represents the market’s own emotional equilibrium * Deviation measures how far current sentiment has drifted from that equilibrium This allows the indicator to highlight conditions such as: * 🔥 Overheated: High sentiment + strong positive deviation * 💎 Undervalued: Low sentiment + strong negative deviation * ⚠️ Misaligned: Emotionally extreme, but inconsistent with historical behavior How to Use (Lite Philosophy) * Use TFGI Lite as a background compass, not a trigger * Combine it with price structure, risk management, and your own strategy * Extreme readings suggest emotional tension, not immediate reversal > Think of TFGI Lite as market weather — it tells you the climate, not when to open or close the door. About Parameters & Customization All parameters in TFGI Lite are fully adjustable. Markets have different personalities — volatility, sentiment range, and emotional extremes vary by asset and timeframe. You are encouraged to: * Adjust fear/greed thresholds based on the asset you trade * Tune smoothing and baseline lengths to match your timeframe * Treat sentiment levels as relative, not universal absolutes There is no single “correct” setting — TFGI Lite is designed to adapt to your market, not force the market into a fixed model. Important Notes * This is a technical sentiment indicator, not financial advice * No future performance is implied * Designed to reduce emotional decision-making, not replace it --- 🇹🇼 繁體中文 — 指標說明 Shiori’s TFGI Lite（技術型恐懼與貪婪指數） 是一款開源的市場情緒指標，目的不是預測價格，而是幫助你理解市場當下的「情緒狀態」。 與其問「現在該不該買或賣」，TFGI Lite 更關心的是： > 市場情緒是否已經偏離了它自己的歷史平衡？ 本指標整合三個常見但關鍵的技術面向，並統一轉換為 0–100 的情緒刻度，讓市場狀態一眼可讀。 這個指標是什麼 * 市場情緒與狀態觀察工具（非買賣訊號） * 用來辨識情緒極端與錯位狀態 * 適用於任何商品與任何週期 * 完全開源，可學習、可調整 核心構成 * 恐懼因子：短期 / 長期 ATR 比例（對數壓縮） * 貪婪因子：價格 Z-Score（tanh 正規化） * 動能因子：RSI 作為情緒動量 歷史基準與偏離 TFGI Lite 引入「歷史情緒基準」的概念： * 基準代表市場長期的情緒平衡 * 偏離值顯示當前情緒與自身歷史的距離 因此可以辨識： * 🔥 過熱（高情緒 + 正向偏離） * 💎 低估（低情緒 + 負向偏離） * ⚠️ 錯位（情緒極端，但不符合歷史行為） 使用建議（Lite 精神） * 將 TFGI Lite 作為「背景雷達」，而非進出場依據 * 搭配價格結構、風險控管與個人策略 * 情緒極端不等於立刻反轉 > 你可以把它想像成市場的天氣預報，而不是交易指令。 參數調整與個人化說明 本指標中的所有參數皆可調整。不同市場、不同商品，其波動特性與情緒區間並不相同。 建議你： * 依標的特性自行調整恐懼 / 貪婪門檻 * 依交易週期調整平滑與基準長度 * 將情緒數值視為「相對狀態」，而非固定答案 TFGI Lite 的設計初衷，是讓你定義市場，而不是被單一參數綁住。 溫馨提示 如果你在調整指標參數時遇到不熟悉的項目，請點擊參數旁邊的 「!」圖示，每個設定都有清楚的說明。 本指標設計為可慢慢探索，請依自己的節奏理解市場狀態。 --- 🇯🇵 日本語 — インジケーター説明 Shiori’s TFGI Lite は、価格を予測するための指標ではなく、 市場の「感情状態」を可視化するためのオープンソース指標です。 この指標が問いかけるのは、 > 現在の市場感情は、過去のバランスからどれだけ乖離しているのか？ という一点です。 特徴 * 売買シグナルではありません * 市場心理の極端さやズレを観察するためのツールです * すべての銘柄・時間軸に対応 * 学習・調整可能なオープンソース 構成要素 * 恐怖要素：ATR 比率（対数圧縮） * 強欲要素：価格 Z スコア（tanh 正規化） * モメンタム：RSI ベースラインと乖離 市場自身の感情的な基準点と、 現在の感情との距離を測定します。 過熱・割安・感情のズレを視覚的に把握できます。 パラメータ調整について TFGI Lite のすべてのパラメータは調整可能です。市場ごとにボラティリティや感情の振れ幅は異なります。 * 恐怖・強欲の閾値は銘柄に応じて調整してください * 時間軸に合わせて平滑化やベースライン期間を変更できます * 数値は絶対値ではなく、相対的な感情状態として捉えてください この指標は、市場に合わせて柔軟に使うことを前提に設計されています。 フレンドリーヒント 入力項目で分からない設定がある場合は、横に表示されている 「!」アイコン をクリックしてください。各パラメータには分かりやすい説明が用意されています。 このインジケーターは、落ち着いて市場の状態を理解するためのものです。 --- 🇰🇷 한국어 — 지표 설명 Shiori’s TFGI Lite는 매수·매도 신호를 제공하는 지표가 아니라, 시장 감정의 상태를 이해하기 위한 기술적 심리 지표입니다. 이 지표의 핵심 질문은 다음과 같습니다. > 현재 시장 감정은 과거의 균형 상태에서 얼마나 벗어나 있는가? 특징 * 거래 신호 아님 * 시장 심리의 과열·저평가·불일치를 관찰 * 모든 자산, 모든 타임프레임 지원 * 오픈소스 기반 구성 요소 * 공포 요인: ATR 비율 (로그 압축) * 탐욕 요인: Z-Score (tanh 정규화) * 모멘텀: RSI 활용 방법 TFGI Lite는 배경 지표로 사용하세요. 가격 구조와 리스크 관리와 함께 사용할 때 가장 효과적입니다. 파라미터 조정 안내 TFGI Lite의 모든 설정 값은 사용자가 직접 조정할 수 있습니다. 자산마다 변동성과 감정 범위는 서로 다릅니다. * 공포 / 탐욕 기준값은 종목 특성에 맞게 조정하세요 * 타임프레임에 따라 스무딩 및 기준 기간을 변경할 수 있습니다 * 감정 수치는 절대적인 값이 아닌 상대적 상태로 해석하세요 이 지표는 하나의 정답을 강요하지 않고, 시장에 맞춰 적응하도록 설계되었습니다. 친절한 안내 설정 값이 익숙하지 않다면, 항목 옆에 있는 "!" 아이콘을 클릭해 보세요. 각 입력값마다 설명이 제공됩니다. 이 지표는 천천히 시장의 맥락을 이해하도록 설계되었습니다. --- Educational purpose only. Not financial advice. --- #FearAndGreed #MarketSentiment #TradingPsychology #TechnicalAnalysis #OpenSourceIndicator #Volatility #RSI #ATR #ZScore #MultiAsset #TradingView #Shiori
Pine Script®指标
由eddy121384提供
1
MACD ultimate with EMA overrideOverview This Pine Script v5 indicator combines MACD zero-cross signals, SuperTrend trend validation, an EMA(50/200) trend filter and an EMA-crossover override to produce clean, session-constrained entry signals and robust exit logic. It draws labels and lines on the chart (entries, exits, SL lines) and supports alerts. Stop-losses use percentage-based sizing and are evaluated on bar close only to avoid intrabar noise. Key features Primary entry rule (MACD zero-cross): Buy when MACD line crosses above zero (current bar MACD > 0 and previous bar MACD < 0). Sell when MACD line crosses below zero (current bar MACD < 0 and previous bar MACD > 0). Session-only entries: Entries are generated only inside a user-defined session (e.g., 09:30-11:30). Exits are evaluated at all times. SuperTrend validation: Optional SuperTrend filter for entries and exits. Can be configured so exits require both MACD exit and SuperTrend flip (AND mode) or use OR mode. EMA trend filter for entries: Optional EMA(50) vs EMA(200) filter — when enabled the indicator will only open buys in EMA-up trend and sells in EMA-down trend. EMA crossover override (priority rule): If EMA fast crosses the slow: EMA50 crosses above EMA200 → forced BUY override (bypasses session, SuperTrend, MACD). Exits any active short and opens long. EMA50 crosses below EMA200 → forced SELL override (bypasses other validations). Exits any active long and opens short. Overrides respect same-direction protection (won’t reopen an existing same-side position). Opposite-entry immediate exit: When an opposite-direction raw entry (MACD zero-cross) occurs, any active opposite trade is exited immediately (then the script may open the opposite entry subject to entry validation). Same-direction repeated signals do not force an exit. Stop-Loss (percentage): Parameterized SL (%) applied at entry; SL is checked and triggered only on bar close (e.g., long SL triggers if barstate.isconfirmed and close <= SL). Labels & SL lines: Single-line, non-repainting labels for entries/exits; SL horizontal line drawn on open positions and greys out after closing. Plots & visuals: MACD panel (histogram, MACD, signal) optional. SuperTrend plotted as a single color-coded line: green for bullish, red for bearish (no dots). Optional EMA( fast / slow ) plots. Entry markers (triangles) shown only for session-filtered entries. Alerts: Entry and exit alerts are included and can be toggled on/off. Inputs (high level) MACD: fast, slow, signal lengths. SL (%) and toggle to enable/disable SL. SuperTrend: ATR length, multiplier; toggles: require for entry, allow/require for exit, show/hide. EMA trend: enable/disable filter; fast/slow lengths; show/hide EMAs. EMA override (built-in) — crossover detection triggers forced entry/exit. Session: time range (HHMM-HHMM) — applies to entry generation only. Misc: allow multiple entries flag, enable alerts, show/hide MACD panel. Behavioral notes & caveats The indicator is an overlay indicator (not a strategy()), so it draws visual signals and alerts but does not place real trades — use strategy() conversion to backtest trade P&L. EMA override bypasses all validations by design — it forcibly exits the opposite side and opens the override side immediately (on the same bar). This is intentional to capture major trend flips. SL is checked on bar close only. That reduces false SL triggers from intrabar spikes but means realized fills can differ in live trading depending on execution and slippage. Opposite-entry exits are immediate (no SuperTrend/MACD requirement) except when a crossover override is the cause — the script guards so EMA overrides take precedence. Pine Script runs on bar close for most accurate signals; intrabar behavior depends on your chart settings (realtime vs historical) — expect small differences between indicator labels and broker fills. Plot/label density: many labels and SL lines can clutter the chart on lower timeframes. Consider hiding SL lines after N bars (optional enhancement) or use higher timeframe charts for less clutter. Suggested default settings MACD: 12, 26, 9 SL: 1.0 (%) with Use SL = on SuperTrend: ATR 10, Multiplier 3.0, require for entry = true, require for exit = true (AND mode) EMA trend filter: enabled (50/200) Session: 0930-1130 (adjust to your exchange/timezone) Alerts: on How to use Paste the full Pine v5 script into TradingView’s Pine Editor and add to chart. Set the trade_session to the market hours you want entries in (chart timezone should match your intended exchange). Toggle Use EMA trend / Require SuperTrend / Require ST for exit depending on how tight you want validation. Use strategy() conversion before backtesting to verify the rules produce acceptable historical returns (indicator-only won’t generate P&L). Recommended next steps Convert to a strategy() script to backtest and measure win rate, drawdown, profit factor, and to validate the SL-on-close logic with realistic fills. Add an input to auto-hide SL lines after N bars or compress labels to a compact trade status box. Consider adding ATR- or volatility-based SL as an alternative to percentage SL.
Pine Script®指标
由ebi1405提供
JH MantraBAND-C + AlphaWave Signals v1.3 (Clean)AlphaWave는 추세 + 눌림 + 반전을 하나의 흐름으로 묶은 트레이딩 시그널입니다. • 20 HMA 기반 추세 판단 • 변동성 밴드 구간(상·하단)에서의 눌림/되돌림 포착 • 과도한 신호를 줄이고 확률 높은 구간만 표시 권장 타임프레임: - 3분 / 5분 (단타, 스캘핑) - 일봉 (추세 확인용) ※ 이 지표는 신호 남발을 피하고, ‘기다렸다가 들어가는 매매’를 목표로 설계되었습니다. AlphaWave is a trend-following indicator designed to capture pullbacks and reversals within volatility zones. • 20 HMA based trend structure • Upper / lower volatility bands for context • Filtered signals to reduce noise Best used on: - 3m / 5m intraday charts - Daily charts for trend confirmation This indicator focuses on patience and high-probability setups.
Pine Script®指标
由hyun6606提供
Breakout Scanner Checklist for Swing Trades📈 EOD Breakout Scanner Checklist Overview This indicator combines Mark Minervini's legendary Trend Template criteria with additional breakout detection enhancements, specifically optimized for end-of-day (EOD) scanning and Qullamaggie-style momentum trading. Perfect for swing traders who scan stocks after market close and execute breakout entries on the first 5-minute candle after market open. 🎯 Core Features 1. Complete Minervini Trend Template (8 Criteria) Implements all 7 rules from Mark Minervini's trend template methodology: - Price above 150 & 200 day EMAs (long-term uptrend) - EMA(150) above EMA(200) (trend alignment) - EMA(200) trending up for at least 1 month (sustained trend) - EMA(50) above both 150 & 200 EMAs (intermediate strength) - Current price above EMA(50) (short-term momentum) - Price at least 25% above 52-week low (sufficient rally) - Price within 25% of 52-week high (near strength) - (additional) Price within 10% above EMA(10) (not overextended) 2. Enhanced Breakout Detection (Toggle On/Off) Three powerful enhancements that can be individually enabled: Stage Analysis - Identifies stocks in Weinstein Stage 2 (advancing phase) - Confirms proper EMA alignment - Validates upward slope of 200 EMA - Filters out late-stage or declining trends Volatility Squeeze - Detects "coiled spring" setups - ATR compression (recent volatility < 80% of average) - Bollinger Band squeeze detection - Identifies tight consolidations before explosive moves Price Action Quality - Measures clean accumulation - Up/down day ratio (prefers >1.2 ratio) - Controlled price range (< 20% over 20 days) - Filters erratic, whipsaw price action 3. Dual Table System Main Table - Focus on what matters - Shows only enabled enhanced criteria - 🚀 BREAKOUT SIGNAL - Clear YES/NO verdict - Clean visual hierarchy Support Table (Optional) - Deep dive analysis - All 8 Minervini criteria with status - Can be toggled on/off for cleaner charts - Perfect for understanding why a signal triggered 🔧 How To Use For EOD Scanning: - Run this indicator on your stock universe after market close - Look for stocks showing 🚀 BREAKOUT SIGNAL = YES for quick scan or use the support table to reach more details for deep down analysis - Add the stocks falls with your criteria to your watchlist for the next trading day For Intraday Execution: - At market open, watch your watchlist from EOD scan - Identify the pivot point (recent resistance high, possible PDH) - Wait for price to break above pivot on first 5-min candle - Confirm with volume - Enter if both price + volume confirm breakout Note on Volume: This indicator intentionally does NOT include volume confirmation in the signal, as it's designed for EOD scanning. You should manually verify volume when the actual breakout occurs at market open. 🎨 Visual Features - EMA(10) Zone: Purple shaded area showing 10% zone above EMA(10) - 52-Week High/Low Lines: Orange reference lines (toggleable) - Modern Dark Theme: Low-contrast, professional design easy on the eyes - Clean Status Indicators: ✓ for pass, ✗ for fail ⚙️ Customizable Settings Display Options: - Toggle 52-week high/low lines - Toggle EMA(10) +10% zone - Adjust lookback periods Enhanced Detection: - Enable/disable Stage Analysis - Enable/disable Volatility Squeeze - Enable/disable Price Action Quality Panel Settings: - Position tables (top/middle/bottom, left/center/right) - Show/hide Minervini criteria support table 📚 Best For ✅ Swing traders looking for momentum breakouts ✅ Traders using EOD scanning + intraday execution ✅ Minervini/O'Neil CANSLIM methodology followers ✅ Qullamaggie-style breakout traders ✅ Anyone seeking high-probability setups with institutional backing 💡 Trading Strategy Context This indicator is based on proven methodologies: - Mark Minervini: SEPA (Specific Entry Point Analysis) and Trend Template - Kristjan Qullamaggie: Momentum breakouts with volume confirmation - Stan Weinstein: Stage Analysis for market cycle timing Combined, these create a powerful framework for identifying stocks with: - Strong institutional sponsorship - Proper trend structure - Tight consolidation (coiled energy) - Clean accumulation patterns - High probability of continuation ⚠️ Disclaimer This indicator is a screening and analysis tool, not a trading system. It helps identify potential setups but does not provide entry/exit signals. Always: - Verify volume at actual breakout - Use proper position sizing - Set stop losses - Manage risk appropriately - Do your own due diligence Past performance does not guarantee future results. 📖 Credits Based on Mark Minervini's Trend Template methodology and enhanced with modern breakout detection techniques. Original code/influence by yogy.frestarahmawan. Happy Trading! 🚀 If you find this indicator useful, please give it a thumbs up and share your feedback!
Pine Script®指标
由umutbarisbasol提供