开始

在脚本中搜索"ATH"

ATH/ATL Tracker [LuxAlgo]The ATH/ATL Tracker effectively displays changes made between new All-Time Highs (ATH)/All-Time Lows (ATL) and their previous respective values, over the entire history of available data. The indicator shows a histogram of the change between a new ATH/ATL and its respective preceding ATH/ATL. A tooltip showing the price made during a new ATH/ATL alongside its date is included. 🔶 USAGE By tracking the change between new ATHs/ATLs and older ATHs/ATLs, traders can gain insight into market sentiment, breadth, and rotation. If many stocks are consistently setting new ATHs and the number of new ATHs is increasing relative to old ATHs, it could indicate broad market participation in a rally. If only a few stocks are reaching new ATHs or the number is declining, it might signal that the market's upward momentum is decreasing. A significant increase in new ATHs suggests optimism and willingness among investors to buy at higher prices, which could be considered a positive sentiment. On the other hand, a decrease or lack of new ATHs might indicate caution or pessimism. By observing the sectors where stocks are consistently setting new ATHs, users can identify which sectors are leading the market. Sectors with few or no new ATHs may be losing momentum and could be identified as lagging behind the overall market sentiment. 🔶 DETAILS The indicator's main display is a histogram-style readout that displays the change in price from older ATH/ATLs to Newer/Current ATH/ATLs. This change is determined by the distance that the current values have overtaken the previous values, resulting in the displayed data. The largest changes in ATH/ATLs from the ticker's history will appear as the largest bars in the display. The most recent bars (depending on the selected display setting) will always represent the current ATH or ATL values. When determining ATH & ATL values, it is important to filter out insignificant highs and lows that may happen constantly when exploring higher and lower prices. To combat this, the indicator looks to a higher timeframe than your chart's timeframe in order to determine these more significant ATHs & ATLs. For Example: If a user was on a 1-minute chart and 5 highs-new highs occur across 5 adjacent bars, this has the potential to show up as 5 new ATHs. When looking at a higher timeframe, 5 minutes, only the highest of the 5 bars will indicate a new ATH. To assist with this, the indicator will display warnings in the dashboard when a suboptimal timeframe is selected as input. 🔹 Dashboard The dashboard displays averages from the ATH/ATL data to aid in the anticipation and expectations for new ATH/ATLs. The average duration is an average of the time between each new ATH/ATL, in this indicator it is calculated in "Days" to provide a more comprehensive understanding. The average change is the average of all change data displayed in the histogram. 🔶 SETTINGS Duration: The designated higher timeframe to use for filtering out insignificant ATHs & ATLs. Order: The display order for the ATH/ATL Bars, Options are to display in chronological (oldest to newest) or reverse chronological order (newest to oldest). Bar Width: Sets the width for each ATH/ATL bar. Bar Spacing: Sets the # of empty bars in between each ATH/ATL bar. Dashboard Settings: Parameters for the dashboard's size and location on the chart.
Pine Script®指标
由LuxAlgo提供
ATH Drawdown Indicator by Atilla YurtsevenThe ATH (All-Time High) Drawdown Indicator, developed by Atilla Yurtseven, is an essential tool for traders and investors who seek to understand the current price position in relation to historical peaks. This indicator is especially useful in volatile markets like cryptocurrencies and stocks, offering insights into potential buy or sell opportunities based on historical price action. This indicator is suitable for long-term investors. It shows the average value loss of a price. However, it's important to remember that this indicator only displays statistics based on past price movements. The price of a stock can remain cheap for many years. 1. Utility of the Indicator: The ATH Drawdown Indicator provides a clear view of how far the current price is from its all-time high. This is particularly beneficial in assessing the magnitude of a pullback or retracement from peak levels. By understanding these levels, traders can gauge market sentiment and make informed decisions about entry and exit points. 2. Risk Management: This indicator aids in risk management by highlighting significant drawdowns from the ATH. Traders can use this information to adjust their position sizes or set stop-loss orders more effectively. For instance, entering trades when the price is significantly below the ATH could indicate a higher potential for recovery, while a minimal drawdown from the ATH may suggest caution due to potential overvaluation. 3. Indicator Functionality: The indicator calculates the percentage drawdown from the ATH for each trading period. It can display this data either as a line graph or overlaid on candles, based on user preference. Horizontal lines at -25%, -50%, -75%, and -100% drawdown levels offer quick visual cues for significant price levels. The color-coding of candles further aids in visualizing bullish or bearish trends in the context of ATH drawdowns. 4. ATH Level Indicator (0 Level): A unique feature of this indicator is the 0 level, which signifies that the price is currently at its all-time high. This level is a critical reference point for understanding the market's peak performance. 5. Mean Line Indicator: Additionally, this indicator includes a 'Mean Line', representing the average percentage drawdown from the ATH. This average is calculated over more than a thousand past bars, leveraging the law of large numbers to provide a reliable mean value. This mean line is instrumental in understanding the typical market behavior in relation to the ATH. Disclaimer: Please note that this ATH Drawdown Indicator by Atilla Yurtseven is provided as an open-source tool for educational purposes only. It should not be construed as investment advice. Users should conduct their own research and consult a financial advisor before making any investment decisions. The creator of this indicator bears no responsibility for any trading losses incurred using this tool. Please remember to follow and comment! Trade smart, stay safe Atilla Yurtseven
Pine Script®指标
由AtillaYurtseven提供
3
ATH Distance HeatmapThe "ATH Distance Heatmap" is a powerful visualization tool designed for traders and investors who seek to quickly assess the relative performance of assets against their All-Time Highs (ATH). By mapping the percentage distance of current prices from their historical peaks, this script provides a unique perspective on market sentiment, potential recovery opportunities, and overvaluation risks. Key Features: Visual Clarity: Utilize a color-coded heatmap to instantly recognize which assets are near or far from their ATHs. Colors transition smoothly from cool to warm tones, indicating smaller to larger distances respectively. Real-Time Updates: The script updates dynamically with live market data, ensuring you have the most current information at your fingertips. Versatile Application: Whether you're tracking stocks, cryptocurrencies, commodities, or indices, the "ATH Distance Heatmap" adapts to a wide array of assets, making it a versatile tool for your trading arsenal. Insightful Analysis: Beyond mere visualization, this tool can help identify potential buying opportunities in assets that are significantly below their ATHs, or highlight caution for those nearing their peaks. How to Use: Configure Your Assets: Start by selecting the assets you wish to track. The script can be customized to monitor a broad market range or a specific segment. Interpret the Colors: Use the color gradient to gauge the distance of each asset from its ATH. Cooler colors indicate assets closer to their ATH, while warmer colors highlight those further away. Ideal for: Traders looking for a quick visual guide to market trends and asset performance. Investors aiming to capitalize on recovery opportunities or to evaluate entry and exit points. Market analysts interested in a concise overview of asset health relative to historical performance.
Pine Script®指标
由kriswaters提供
1
ATH Gain PotentialThe indicator quantifies the relative position of a symbol's current closing price in relation to its historical all-time high (ATH). By evaluating the ratio between the ATH and the present closing price, it provides an analytical framework to estimate the potential gains that could accrue if the symbol were to revert to its ATH from a specified reference point. The ratio serves as a quantitative measure for assessing the distance between the current market value and the symbol's historical peak, enabling investors to gauge the prospective profitability of a return to the ATH.
Pine Script®指标
由zkdev提供
All Time High (ATH) Levels [LuxAlgo]The All Time High (ATH) Levels indicator displays a user-set amount of historical all-time high levels made on the user's chart, highlighting potential key price levels. Displayed levels can be filtered out based on their duration, as well as their relative distance from each other. The script also evaluates the role a level might have as a support or resistance using a percentage, classifying ATH levels as either support or resistance depending on the result. 🔶 USAGE On certain assets market participants give a high level of attention to all-time highs made by an asset, with the most pertinent example being Bitcoin. Previous all-time highs can play important roles as psychological price levels, with the most recent ones often offering major resistance points, and older ones being used as support. Users can filter out temporary ATHs using the ATH Minimum Duration setting, removing any ATH that lasts less than the user-specified number of bars. Higher values of this setting effectively preserve ATHs that become distinguishable peaks. These can offer more significant support/resistance levels. When displaying each historical level some of them can be very close to each other. Users can use the "Minimum Distance Between ATH" setting to filter out levels too close to each other, with higher values of this setting returning more spaced levels. Distances are first evaluated from the most recent ATH. Note that this setting can cause repainting. 🔹 SR Classification The script evaluates the ability of an ATH level to act as a support or resistance since its occurrence, and measures its strength as a percentage, with higher percentage values suggesting a stronger support or resistance. Levels classified with "R" suggest that the price was located below the level most of the time, indicative of a resistance, while a level classified with "S" suggests that the price was located above the level most of the time, indicative of a support. Percentages between 99% to 50% are often indicative of supports/resistances being tested, while values below 50% reflect more centered levels. A value of 100% suggests that an ATH level was not tested enough. users can filter out any level with a percentage below the "Minimum %" setting. 🔶 SETTINGS Show Last ATH: Specify the amount of most recent ATH's to display. ATH Minimum Duration: Minimum duration (in bars) of an ATH, that is the minimum number of bars that must elapse before another ATH can be made. Minimum Distance Between ATH: Minimum distance between displayed ATH levels, starting from the most recent ATH. This distance is a multiple of the average true range. 🔹 SR Classification Show SR%: Show percentage as well as ATH level classification. Minimum %: Minimum percentage values required to display an ATH level.
Pine Script®指标
由LuxAlgo提供
8
[TTI] All-time-high (ATH), (ATL), 52 week high and low Dots––––History & Credit I wanted to show our community the idea that stocks that make All Time High are likely to continue making ATHs for some time. It goes contrary to the idea "buy cheap sell high". Actually, in the real market leaders the stocks that make 100+% return are just getting started on returns to few THOUSAND percent. I have used code from QuantNovad scrip in this one too. So thanks to him as well, since it speeded writing it from scratch! –––––What it does The script paints dots and shows stats. The dots are 4 types: 🟢 = Every time a new ATH is achieved, a green dot paints above the bar 🟣 = Every time a new 52week High is achieved, a purple dot paints above the bar 🟡 = Every time a new ATL is achieved, a yellow dot paints below the bar 🟠 = Every time a new 52week Low is achieved, a orange dot paints below the bar Stats = Show in a box in the bottom right corner of the screen. How many times has this stock achieved: 👉 ATHs 👉 52WK High 👉 ATLs 👉 52WK LOW –––––How to use it This is really an illustrative script to get the idea of the methodology "buy high sell higher', that we teach as momentum traders. Some notable examples to check are: HOOD MSFT TSLA AAPL See the stock dynamics and understand that bottom fishing doesn't result in stocks making massive moves.
Pine Script®指标
由TintinTrading提供
7
BTC ATH ROIThis indicator shows the ROI % of Bitcoin from when it passed its ATH of the previous bull cycle. I found it interesting that each time it crossed its ATH it took around 260-280 days to peak for each one. This bull run seems to follow between both of the previous bull runs including this recent dip. There are a couple issues I want to fix but can't figure out: 1. You need to completely scroll out and move towards 2013 on the Daily chart for all 3 lines to show up. Would be nice to load all of that data at the start. 2. I can't query the value of the plots after they have been offset. This would be useful to create a prediction bias for the current plot so would could see where btc might go. If you peeps know of a way to load all data or query plot values after offsets, please share. That would be awesome.
Pine Script®指标
由OrionAlgo提供
2
ORB 30 Alerts (ATH)Overview ATH ORB 30m automates the Opening Range Breakout (ORB) process across multiple global sessions — Tokyo, London, and New York — and delivers clean, consolidated alerts when fresh breakouts occur. It’s built for traders who track several tickers and want precise, non-repeating signals that reflect genuine momentum shifts, not constant noise. How it works The script defines a 30-minute Opening Range (ORB) for each enabled session and plots its high, low, and midpoint levels. Every 10-minute candle close is evaluated to detect first-time crosses of those range boundaries — upward or downward. Once a breakout triggers, that side’s alert is disabled until price returns inside the range, where the system automatically re-arms. Multiple triggers in the same bar are batched into one combined alert, listing all symbols that broke out. A built-in debug panel and optional chart labels visualize each trigger and re-arm event in real time. Key features -Multi-session ORB logic (Tokyo, London, New York) -10-minute confirmation filter to validate breakouts -Automatic alert re-arming when price re-enters range -Combined per-bar alert messages (no duplicates) -Optional on-chart labels and debug diagnostics -Optimized for watchlists and multi-symbol scanners Usage Designed for day traders and momentum scalpers, this tool highlights early directional strength during market opens. Add it to your chart, enable your preferred sessions, and set alert conditions for “ORB Breakouts (BUY),” “ORB Breakdowns (SELL),” or "Any alert() function call" You’ll receive one concise message each bar showing exactly which symbols broke out and in which direction. DISCLAIMER: This script is for educational and informational purposes only. It does not constitute financial advice or a recommendation to buy or sell any security. Always perform your own due diligence and backtesting before using any trading strategy live. Trading involves risk; past performance does not guarantee future results.
Pine Script®指标
由cautiousRice_nolo提供
2
ATH대비 지정하락률에 도착 시 매수 - 장기홀딩 선물 전략(ATH Drawdown Re-Buy Long Only)본 스크립트는 과거 하락 데이터를 이용하여, 정해진 하락 %가 발생하는 경우 자기 자본의 정해진 %만큼을 진입하게 설계되어진 스트레티지입니다. 레버리지를 사용할 수 있으며 기본적으로 셋팅해둔 값이 내장되어있습니다.(자유롭게 바꿔서 쓰시면 됩니다.) 추가적으로 2번의 진입 외에도 다른 진입 기준, 진입 %를 설정하실 수 있으며 - ChatGPT에게 요청하면 수정해줄 것입니다. 실제 사용용도로는 KillSwitch 기능을 꺼주세요. 바 돋보기 기능을 켜주세요. ATH Drawdown Re-Buy Long Only 전략 설명 1. 전략 개요 ATH Drawdown Re-Buy Long Only 전략은 자산의 역대 최고가(ATH, All-Time High)를 기준으로 한 하락폭(드로우다운)을 활용하여, 특정 구간마다 단계적으로 롱 포지션을 구축하는 자동 재매수(Long Only) 전략입니다. 본 전략은 다음과 같은 목적을 가지고 설계되었습니다. 급격한 조정 구간에서 체계적인 분할 매수 및 레버리지 활용 ATH를 기준으로 한 명확한 진입 규칙 제공 실시간으로 평단가 레버리지 청산가 추정 계좌 MDD 수익률 등을 시각적으로 제공하여 리스크와 포지션 상태를 직관적으로 확인할 수 있도록 지원 ※ 본 전략은 교육·연구·백테스트 용도로 제공되며, 어떠한 형태의 투자 권유 또는 수익을 보장하지 않습니다. 2. 전략의 핵심 개념 2-1. ATH(역대 최고가) 기준 드로우다운 전략은 차트 상에서 항상 가장 높은 고가(High)를 ATH로 기록합니다. 새로운 고점이 형성될 때마다 ATH를 갱신하고, 해당 ATH를 기준으로 다음을 계산합니다. 현재 바의 저가(Low)가 ATH에서 몇 % 하락했는지 현재 바의 종가(Close)가 ATH에서 몇 % 하락했는지 그리고 사전에 설정한 두 개의 드로우다운 구간에서 매수를 수행합니다. 1차 진입 구간: ATH 대비 X% 하락 시 2차 진입 구간: ATH 대비 Y% 하락 시 각 구간은 ATH가 새로 갱신될 때마다 한 번씩만 작동하며, 새로운 ATH가 생성되면 다시 “1차 / 2차 진입 가능 상태”로 초기화됩니다. 2-2. 첫 포지션 100% / 300% 특수 규칙 이 전략의 중요한 특징은 **“첫 포지션 진입 시의 예외 규칙”**입니다. 전략이 현재 어떠한 포지션도 들고 있지 않은 상태에서 최초로 롱 포지션을 진입하는 시점(첫 포지션)에 대해: 기본적으로는 **자산의 100%**를 기준으로 포지션을 구축하지만, 만약 그 순간의 가격이 ATH 대비 설정값 이상(예: 약 –72.5% 이상 하락한 상황) 이라면 → 자산의 300% 규모로 첫 포지션을 진입하도록 설계되어 있습니다. 이 규칙은 다음과 같이 동작합니다. 첫 진입이 1차 드로우다운 구간에서 발생하든, 첫 진입이 2차 드로우다운 구간에서 발생하든, 현재 하락폭이 설정된 기준 이상(예: –72.5% 이상) 이라면 → “이 정도 하락이면 첫 진입부터 더 공격적으로 들어간다”는 의미로 300% 규모로 진입 그 이하의 하락폭이라면 → 첫 진입은 100% 규모로 제한 즉, 전략은 다음 두 가지 모드로 동작합니다. 일반적인 상황의 첫 진입: 자산의 100% 심각한 드로우다운 구간에서의 첫 진입: 자산의 300% 이 특수 규칙은 깊은 하락에서는 공격적으로, 평소에는 상대적으로 보수적으로 진입하도록 설계된 것입니다. 3. 전략 동작 구조 3-1. 매수 조건 차트 상 High 기준으로 ATH를 추적합니다. 각 바마다 해당 ATH에서의 하락률을 계산합니다. 사용자가 설정한 두 개의 드로우다운 구간(예시): 1차 구간: 예를 들어 ATH – 50% 2차 구간: 예를 들어 ATH – 72.5% 각 구간에 대해 다음과 같은 조건을 확인합니다. “이번 ATH 구간에서 아직 해당 구간 매수를 한 적이 없는 상태”이고, 현재 바의 저가(Low)가 해당 구간 가격 이하를 찍는 순간 → 해당 바에서 매수 조건 충족으로 간주 실제 주문은: 해당 구간 가격에 맞춰 롱 포지션 진입(리밋/시장가 기반 시뮬레이션) 으로 처리됩니다. 3-2. ATH 갱신과 진입 기회 리셋 차트 상에서 새로운 고점(High)이 기존 ATH를 넘어서는 순간, ATH가 갱신되고, 1차 / 2차 진입 여부를 나타내는 내부 플래그가 초기화됩니다. 이를 통해, 시장이 새로운 고점을 돌파해 나갈 때마다, 해당 구간에서 다시 한 번씩 1차·2차 드로우다운 진입 기회를 갖게 됩니다. 4. 포지션 사이징 및 레버리지 4-1. 계좌 자산(Equity) 기준 포지션 크기 결정 전략은 현재 계좌 자산을 다음과 같이 정의하여 사용합니다. 현재 자산 = 초기 자본 + 실현 손익 + 미실현 손익 각 진입 구간에서의 포지션 가치는 다음과 같이 결정됩니다. 1차 진입 구간: “자산의 몇 %를 사용할지”를 설정값으로 입력 설정된 퍼센트를 계좌 자산에 곱한 뒤, 다시 전략 내 레버리지 배수(Leverage) 를 곱하여 실제 포지션 가치를 계산 2차 진입 구간: 동일한 방식으로, 독립된 퍼센트 설정값을 사용 즉, 포지션 가치는 다음과 같이 계산됩니다. 포지션 가치 = 현재 자산 × (해당 구간 설정 % / 100) × 레버리지 배수 그리고 이를 해당 구간의 진입 가격으로 나누어 실제 수량(토큰 단위) 를 산출합니다. 4-2. 첫 포지션의 예외 처리 (100% / 300%) 첫 포지션에 대해서는 위의 일반적인 퍼센트 설정 대신, 다음과 같은 고정 비율이 사용됩니다. 기본: 자산의 100% 규모로 첫 포지션 진입 단, 진입 시점의 ATH 대비 하락률이 설정값 이상(예: –72.5% 이상) 일 경우 → 자산의 300% 규모로 첫 포지션 진입 이때 역시 다음 공식을 사용합니다. 포지션 가치 = 현재 자산 × (100% 또는 300%) × 레버리지 그리고 이를 가격으로 나누어 실제 진입 수량을 계산합니다. 이 규칙은: 첫 진입이 1차 구간이든 2차 구간이든 동일하게 적용되며, “충분히 깊은 하락 구간에서는 첫 진입부터 더 크게, 평소에는 비교적 보수적으로” 라는 운용 철학을 반영합니다. 4-3. 실레버리지(Real Leverage)의 추적 전략은 각 바 단위로 다음을 추적합니다. 바가 시작할 때의 기존 포지션 크기 해당 바에서 새로 진입한 수량 이를 바탕으로, 진입이 발생한 시점에 다음을 계산합니다. 실제 레버리지 = (포지션 가치 / 현재 자산) 그리고 차트 상에 예를 들어: Lev 2.53x 와 같은 형식의 레이블로 표시합니다. 이를 통해, 매수 시점마다 실제 계좌 레버리지가 어느 정도였는지를 직관적으로 확인할 수 있습니다. 5. 시각화 및 모니터링 요소 5-1. 차트 상 시각 요소 전략은 차트 위에 다음과 같은 정보를 직접 표시합니다. ATH 라인 High 기준으로 계산된 역대 최고가를 주황색 선으로 표시 평단가(평균 진입가) 라인 현재 보유 포지션이 있을 때, 해당 포지션의 평균 진입가를 노란색 선으로 표시 추정 청산가(고정형 청산가) 라인 포지션 수량이 변화하는 시점을 감지하여, 당시의 평단가와 실제 레버리지를 이용해 근사적인 청산가를 계산 이를 빨간색 선으로 차트에 고정 표시 포지션이 없거나 레버리지가 1배 이하인 경우에는 청산가 라인을 제거 매수 마커 및 레이블 1차/2차 매수 조건이 충족될 때마다 해당 지점에 매수 마커를 표시 "Buy XX% @ 가격", "Lev XXx" 형태의 라벨로 진입 비율과 당시 레버리지를 함께 시각화 레이블의 위치는 설정에서 선택 가능: 바 아래 (Below Bar) 바 위 (Above Bar) 실제 가격 위치 (At Price) 5-2. 우측 상단 정보 테이블 차트 우측 상단에는 현재 계좌·포지션 상태를 요약한 정보 테이블이 표시됩니다. 대표적으로 다음 항목들이 포함됩니다. Pos Qty (Token) 현재 보유 중인 포지션 수량(토큰 기준, 절대값 기준) Pos Value (USDT) 현재 포지션의 시장 가치 (수량 × 현재 가격) Leverage (Now) 현재 실레버리지 (포지션 가치 / 현재 자산) DD from ATH (%) 현재 가격 기준, 최근 ATH에서의 하락률(%) Avg Entry 현재 포지션의 평균 진입 가격 PnL (%) 현재 포지션 기준 미실현 손익률(%) Max DD (Equity %) 전략 전체 기간 동안 기록된 계좌 기준 최대 손실(MDD, Max Drawdown) Last Entry Price 가장 최근에 포지션을 추가로 진입한 직후의 평균 진입 가격 Last Entry Lev 위 “Last Entry Price” 시점에서의 실레버리지 Liq Price (Fixed) 위에서 설명한 고정형 추정 청산가 Return from Start (%) 전략 시작 시점(초기 자본) 대비 현재 계좌 자산의 총 수익률(%) 이 테이블을 통해 사용자는: 현재 계좌와 포지션의 상태 리스크 수준 누적 성과 를 직관적으로 파악할 수 있습니다. 6. 시간 필터 및 라벨 옵션 6-1. 전략 동작 기간 설정 전략은 옵션으로 특정 기간에만 전략을 동작시키는 시간 필터를 제공합니다. “Use Date Range” 옵션을 활성화하면: 시작 시각과 종료 시각을 지정하여 해당 구간에 한해서만 매매가 발생하도록 제한 옵션을 비활성화하면: 전략은 전체 차트 구간에서 자유롭게 동작 6-2. 진입 라벨 위치 설정 사용자는 매수/레버리지 라벨의 위치를 선택할 수 있습니다. 바 아래 (Below Bar) 바 위 (Above Bar) 실제 가격 위치 (At Price) 이를 통해 개인 취향 및 차트 가독성에 맞추어 시각화 방식을 유연하게 조정할 수 있습니다. 7. 활용 대상 및 사용 예시 본 전략은 다음과 같은 목적에 적합합니다. 현물 또는 선물 롱 포지션 기준 장기·스윙 관점 추매 전략 백테스트 “고점 대비 하락률”을 기준으로 한 규칙 기반 운용 아이디어 검증 레버리지 사용 시 계좌 레버리지·청산가·MDD를 동시에 모니터링하고자 하는 경우 특정 자산에 대해 “새로운 고점이 형성될 때마다 일정한 규칙으로 깊은 조정 구간에서만 분할 진입하고자 할 때” 실거래에 그대로 적용하기보다는, 전략 아이디어 검증 및 리스크 프로파일 분석, 자신의 성향에 맞는 파라미터 탐색 용도로 사용하는 것을 권장합니다. 8. 한계 및 유의사항 백테스트 결과는 미래 성과를 보장하지 않습니다. 과거 데이터에 기반한 시뮬레이션일 뿐이며, 실제 시장에서는 유동성 슬리피지 수수료 체계 강제청산 규칙 등 다양한 변수가 존재합니다. 청산가는 단순화된 공식에 따른 추정치입니다. 거래소별 실제 청산 규칙, 유지 증거금, 수수료, 펀딩비 등은 본 전략의 계산과 다를 수 있으며, 청산가 추정 라인은 참고용 지표일 뿐입니다. 레버리지 및 진입 비율 설정에 따라 손실 폭이 매우 커질 수 있습니다. 특히 **“첫 포지션 300% 진입”**과 같이 매우 공격적인 설정은 시장 급락 시 계좌 손실과 청산 리스크를 크게 증가시킬 수 있으므로 신중한 검토가 필요합니다. 실거래 연동 시에는 별도의 리스크 관리가 필수입니다. 개별 손절 기준 포지션 상한선 전체 포트폴리오 내 비중 관리 등 본 전략 외부에서 추가적인 안전장치가 필요합니다. 9. 결론 ATH Drawdown Re-Buy Long Only 전략은 단순한 “저가 매수”를 넘어서, ATH 기준으로 드로우다운을 구조적으로 활용하고, 첫 포지션에 대한 **특수 규칙(100% / 300%)**을 적용하며, 레버리지·청산가·MDD·수익률을 통합적으로 시각화함으로써, 하락 구간에서의 규칙 기반 롱 포지션 구축과 리스크 모니터링을 동시에 지원하는 전략입니다. 사용자는 본 전략을 통해: 자신의 시장 관점과 리스크 허용 범위에 맞는 드로우다운 구간 진입 비율 레버리지 설정 다양한 시나리오에 대한 백테스트와 분석 을 수행할 수 있습니다. 다시 한 번 강조하지만, 본 전략은 연구·학습·백테스트를 위한 도구이며, 실제 투자 판단과 책임은 전적으로 사용자 본인에게 있습니다. /ENG Version. This script is designed to use historical drawdown data and automatically enter positions when a predefined percentage drop from the all-time high occurs, using a predefined percentage of your account equity. You can use leverage, and default parameter values are provided out of the box (you can freely change them to suit your style). In addition to the two main entry levels, you can add more entry conditions and custom entry percentages – just ask ChatGPT to modify the script. For actual/live usage, please turn OFF the KillSwitch function and turn ON the Bar Magnifier feature. ATH Drawdown Re-Buy Long Only Strategy 1. Strategy Overview The ATH Drawdown Re-Buy Long Only strategy is an automatic re-buy (Long Only) system that builds long positions step-by-step at specific drawdown levels, based on the asset’s all-time high (ATH) and its subsequent drawdown. This strategy is designed with the following goals: Systematic scaled buying and leverage usage during sharp correction periods Clear, rule-based entry logic using drawdowns from ATH Real-time visualization of: Average entry price Leverage Estimated liquidation price Account MDD (Max Drawdown) Return / performance This allows traders to intuitively monitor both risk and position status. ※ This strategy is provided for educational, research, and backtesting purposes only. It does not constitute investment advice and does not guarantee any profits. 2. Core Concepts 2-1. Drawdown from ATH (All-Time High) On the chart, the strategy always tracks the highest high as the ATH. Whenever a new high is made, ATH is updated, and based on that ATH the following are calculated: How many percent the current bar’s Low is below the ATH How many percent the current bar’s Close is below the ATH Using these, the strategy executes buys at two predefined drawdown zones: 1st entry zone: When price drops X% from ATH 2nd entry zone: When price drops Y% from ATH Each zone is allowed to trigger only once per ATH cycle. When a new ATH is created, the “1st / 2nd entry possible” flags are reset, and new opportunities open up for that ATH leg. 2-2. Special Rule for the First Position (100% / 300%) A key feature of this strategy is the special rule for the very first position. When the strategy currently holds no position and is about to open the first long position: Under normal conditions, it builds the position using 100% of account equity. However, if at that moment the price has dropped by at least a predefined threshold from ATH (e.g. around –72.5% or more), → the strategy will open the first position using 300% of account equity. This rule works as follows: Whether the first entry happens at the 1st drawdown zone or at the 2nd drawdown zone, If the current drawdown from ATH is at or below the threshold (e.g. –72.5% or worse), → the strategy interprets this as “a sufficiently deep crash” and opens the initial position with 300% of equity. If the drawdown is less severe than the threshold, → the first entry is capped at 100% of equity. So the strategy has two modes for the first entry: Normal market conditions: 100% of equity Deep drawdown conditions: 300% of equity This special rule is intended to be aggressive in extremely deep crashes while staying more conservative in normal corrections. 3. Strategy Logic & Execution 3-1. Entry Conditions The strategy tracks the ATH using the High price. For each bar, it calculates the drawdown from ATH. The user defines two drawdown zones, for example: 1st zone: ATH – 50% 2nd zone: ATH – 72.5% For each zone, the strategy checks: If no buy has been executed yet for that zone in the current ATH leg, and If the current bar’s Low touches or falls below that zone’s price level, → That bar is considered to have triggered a buy condition. Order simulation: The strategy simulates entering a long position at that zone’s price level (using a limit/market-like approximation for backtesting). 3-2. ATH Reset & Entry Opportunity Reset When a new High goes above the previous ATH: The ATH is updated to this new high. Internal flags that track whether the 1st and 2nd entries have been used are reset. This means: Each time the market makes a new ATH, The strategy once again has a fresh opportunity to execute 1st and 2nd drawdown entries for that new ATH leg. 4. Position Sizing & Leverage 4-1. Position Size Based on Account Equity The strategy defines current equity as: Current Equity = Initial Capital + Realized PnL + Unrealized PnL For each entry zone, the position value is calculated as follows: The user inputs: “What % of equity to use at this zone” The strategy: Multiplies current equity by that percentage Then multiplies by the strategy’s leverage factor Thus: Position Value = Current Equity × (Zone % / 100) × Leverage Finally, this position value is divided by the entry price to determine the actual position size in tokens. 4-2. Exception for the First Position (100% / 300%) For the very first position (when there is no open position), the strategy does not use the zone % parameters. Instead, it uses fixed ratios: Default: Enter the first position with 100% of equity. If the drawdown from ATH at that moment is greater than or equal to a predefined threshold (e.g. –72.5% or more) → Enter the first position with 300% of equity. The position value is computed as: Position Value = Current Equity × (100% or 300%) × Leverage Then it is divided by the entry price to obtain the token quantity. This rule: Applies regardless of whether the first entry occurs at the 1st zone or 2nd zone. Embeds the philosophy: “In very deep crashes, go much larger on the first entry; otherwise, stay more conservative.” 4-3. Tracking Real Leverage On each bar, the strategy tracks: The existing position size at the start of the bar The newly added size (if any) on that bar When a new entry occurs, it calculates the real leverage at that moment: Real Leverage = (Position Value / Current Equity) This is then displayed on the chart as a label, for example: Lev 2.53x This makes it easy to see the actual leverage level at each entry point. 5. Visualization & Monitoring 5-1. On-Chart Visual Elements The strategy plots the following directly on the chart: ATH Line The all-time high (based on High) is plotted as an orange line. Average Entry Price Line When a position is open, the average entry price of that position is plotted as a yellow line. Estimated Liquidation Price (Fixed) Line The strategy detects when the position size changes. At each size change, it uses the current average entry price and real leverage to compute an approximate liquidation price. This “fixed liquidation price” is then plotted as a red line on the chart. If there is no position, or if leverage is 1x or lower, the liquidation line is removed. Entry Markers & Labels When 1st/2nd entry conditions are met, the strategy: Marks the entry point on the chart. Displays labels such as "Buy XX% @ Price" and "Lev XXx", showing both entry percentage and real leverage at that time. The label placement is configurable: Below Bar Above Bar At Price 5-2. Information Table (Top-Right Panel) In the top-right corner of the chart, the strategy displays a summary table of the current account and position status. It typically includes: Pos Qty (Token) Absolute size of the current position (in tokens) Pos Value (USDT) Market value of the current position (qty × current price) Leverage (Now) Current real leverage (position value / current equity) DD from ATH (%) Current drawdown (%) from the latest ATH, based on current price Avg Entry Average entry price of the current position PnL (%) Unrealized profit/loss (%) of the current position Max DD (Equity %) The maximum equity drawdown (MDD) recorded over the entire backtest period Last Entry Price Average entry price immediately after the most recent add-on entry Last Entry Lev Real leverage at the time of the most recent entry Liq Price (Fixed) The fixed estimated liquidation price described above Return from Start (%) Total return (%) of equity compared to the initial capital Through this table, users can quickly grasp: Current account and position status Current risk level Cumulative performance 6. Time Filters & Label Options 6-1. Strategy Date Range Filter The strategy provides an option to restrict trading to a specific time range. When “Use Date Range” is enabled: You can specify start and end timestamps. The strategy will only execute trades within that range. When this option is disabled: The strategy operates over the entire chart history. 6-2. Entry Label Placement Users can customize where entry/leverage labels are drawn: Below Bar (Below Bar) Above Bar (Above Bar) At the actual price level (At Price) This allows you to adjust visualization according to personal preference and chart readability. 7. Use Cases & Applications This strategy is suitable for the following purposes: Long-term / swing-style re-buy strategies for spot or futures long positions Testing rule-based strategies that rely on “drawdown from ATH” as a main signal Monitoring account leverage, liquidation price, and MDD when using leverage Handling situations where, for a given asset: “Every time a new ATH is formed, you want to wait for deep corrections and enter only at specific drawdown zones” It is generally recommended to use this strategy not as a direct plug-and-play live system, but as a tool for: Strategy idea validation Risk profile analysis Parameter exploration to match your personal risk tolerance and style 8. Limitations & Warnings Backtest results do not guarantee future performance. They are based on historical data only. In live markets, additional factors exist: Liquidity Slippage Fee structures Exchange-specific liquidation rules Funding fees, etc. The liquidation price is only an approximate estimate, derived from a simplified formula. Actual liquidation rules, maintenance margin requirements, fees, and other details differ by exchange. The liquidation line should be treated as a reference indicator, not an exact guarantee. Depending on the configured leverage and entry percentages, losses can be very large. In particular, extremely aggressive settings such as “first position 300% of equity” can greatly increase the risk of large account drawdowns and liquidation during sharp market crashes. Use such settings with extreme caution. For live trading, additional risk management is essential: Your own stop-loss rules Maximum position size limits Portfolio-level exposure controls And other external safety mechanisms beyond this strategy 9. Conclusion The ATH Drawdown Re-Buy Long Only strategy goes beyond simple “buy the dip” logic. It: Systematically utilizes drawdowns from ATH as a structural signal Applies a special first-position rule (100% / 300%) Integrates visualization of leverage, liquidation price, MDD, and returns All of this supports rule-based long position building in drawdown phases and comprehensive risk monitoring. With this strategy, users can: Explore different: Drawdown zones Entry percentages Leverage levels Run various backtests and scenario analyses Better understand the risk/return profile that fits their own market view and risk tolerance Once again, this strategy is intended for research, learning, and backtesting only. All real trading decisions and their consequences are solely the responsibility of the user.
Pine Script®策略
由White_light_提供
3
ATH finder showing passed daysATH Finder Showing Passed Days Indicator Introducing the "ATH Finder Showing Passed Days" – a cutting-edge TradingView indicator meticulously designed for traders and investors focused on capturing and analyzing the all-time highs (ATHs) of financial markets. Whether you're navigating the volatile waves of cryptocurrencies, the dynamic shifts of the stock market, forex, or any other trading instrument, this indicator is your essential tool for highlighting and understanding ATHs with precision. Core Features: Dynamic ATH Tracking: Seamlessly identifies and marks the most recent ATHs in any given market, ensuring that you are always up-to-date with significant price levels that matter the most. Days Since ATH Visualization: Innovatively displays the number of days that have passed since the last ATH was reached. This powerful feature provides crucial insights into market sentiment, offering a clear view of how long the current price has been consolidating or retreating from its peak. Visual Enhancements: Features a striking yellow arrow precisely at the ATH point, drawing immediate attention to pivotal market moments without cluttering your chart. Strategic Placement of Information: Incorporates a non-intrusive label placed in the top right corner of your chart, summarizing the ATH value alongside the days elapsed since its occurrence. This approach ensures your chart remains clean and organized, allowing for other analyses to be conducted without distraction. Customizable to Fit Your Needs: While it's ready to use out of the box, the indicator provides flexibility for customization, making it adaptable to various timeframes and individual trading strategies. Benefits for Traders and Investors: Provides a historical context to current price levels, helping to gauge the strength and potential of market trends. Aids in identifying potential resistance levels, offering strategic insights for entry and exit points. Enhances market analysis with a clear, visual representation of significant price milestones and their temporal context. Easy Setup: To integrate the "ATH Finder Showing Passed Days" indicator into your trading strategy, simply add it from the TradingView Indicators menu to your chart. Customize according to your preferences and let the indicator illuminate your path to more informed decision-making. Why Choose the ATH Finder Showing Passed Days? In the quest for market excellence, understanding the nuances of price movements and their historical significance is paramount. The "ATH Finder Showing Passed Days" indicator not only highlights where and when the market reached its zenith but also contextualizes these moments within the broader tapestry of trading days. Equip yourself with the insight to discern the momentum and potential retracements, elevating your trading to new heights.
Pine Script®指标
由aidin594提供
ATH & ATL Distances PROIndicator Description: ATH & ATL Distances PROThis Pine Script indicator, built on version 6, helps traders visualize and monitor the percentage distances from the current closing price to the rolling All-Time High (ATH) and All-Time Low (ATL) over customizable lookback periods. It's designed for overlay on your TradingView charts, providing a clear table display and optional horizontal lines with labels for quick reference. This tool is ideal for assessing market pullbacks, rallies, or potential reversal points based on recent price extremes. Key Features: Customizable Lookbacks: Three adjustable periods (default: 50, 150, 250 bars) to calculate short-, medium-, and long-term highs/lows. Percentage Distances: Shows how far the current price is from ATH (negative percentage if below) and ATL (positive if above). Visual Aids: Optional dashed lines for ATH/ATL levels extending a set number of bars, with grouped labels to avoid clutter if levels overlap. Info Table: A persistent table summarizing lookbacks, distances, and prices, with color-coded cells for easy reading (red for ATH/dist to top, green for ATL/dist to bottom). User Controls: Toggle rows, lines, table position, and colors via inputs for a personalized experience. How It Works (Logic Explained): The script uses TradingView's built-in functions like ta.highest() and ta.lowest() to find the highest high and lowest low within each lookback period (capped at available bars to handle early chart data). It then computes:Distance to ATH: ((close - ATH) / ATH) * 100 – Negative values indicate the price is below the high. Distance to ATL: ((close - ATL) / ATL) * 100 – Positive values show the price is above the low. Unique ATH/ATL prices across lookbacks are grouped into arrays to prevent duplicate lines/labels; if prices match, labels concatenate details (e.g., "50 Bars HH\n150 Bars HH"). Drawings (lines and labels) are efficiently managed by redrawing only on the latest bar to optimize performance. The table updates in real-time on every bar close.How to Use:Add the indicator to your chart via TradingView's "Indicators" menu (search for "ATH & ATL Distances PRO"). Customize inputs: Adjust lookback periods (1-1000 bars) for your timeframe (e.g., shorter for intraday, longer for daily/weekly). Enable/disable lines, rows, or change colors/table position to suit your setup. Interpret the table: "DIST. TO TOP" (red): Percentage drop needed to reach ATH – useful for spotting overbought conditions. "DIST. TO BOT." (green): Percentage rise from ATL – helpful for identifying support levels. If lines are enabled, hover over labels for details on which lookbacks share the level. Best on any symbol/timeframe; combine with other indicators like RSI or moving averages for confluence. This script is open-source and free to use/modify. No external dependencies – it runs natively on TradingView. Feedback welcome; if you find it useful, a like or comment helps!
Pine Script®指标
由IQ-TRADER提供
Pullback Levels from ATH# ATH Pullback Levels **Assess correction depth with precision – 5%, 10%, 15%, 20% below All-Time High** --- ### Overview This indicator draws **horizontal support lines** at **5%, 10%, 15%, and 20%** below the **All-Time High (ATH)** of any asset. Perfect for **swing traders**, **long-term investors**, and **bull market participants** who want to: - Measure **pullback depth** in real-time - Identify **potential support zones** - Set **alerts** when price enters key retracement levels --- ### Features | Feature | Description | |--------|-------------| | **Dynamic ATH Tracking** | Automatically updates with every new high | | **4 Pullback Levels** | 5%, 10%, 15%, 20% below ATH | | **Live Pullback % Label** | Shows current % drop from ATH (top-right) | | **Customizable Lines** | Toggle visibility, change colors & styles | | **Built-in Alerts** | Trigger on entry into each zone | | **No Errors** | Works on 50k+ bar charts (BTC, SPX, etc.) | | **Time-Based Lines** | Uses `xloc.bar_time` – no 500-bar future limit | --- ### How to Use 1. Apply to any chart (stocks, crypto, forex, indices) 2. Watch the **info box** for current pullback % 3. Use lines as **potential buy zones** during corrections 4. Set **alerts** to be notified when price enters a level > Example: If ATH = $100 → > - 5% = $95 > - 10% = $90 > - 15% = $85 > - 20% = $80 --- ### Inputs - **Show 5% / 10% / 15% / 20% Level** → Toggle on/off - **Line Colors** → Fully customizable - **Line Style** → Solid, Dashed, or Dotted --- ### Alerts Create alerts directly from the indicator: - `"Entered 5% Pullback"` - `"Entered 10% Pullback"` - etc. --- ### Best For - Bull market corrections - Long-term position sizing - Risk management in uptrends - Swing entries on dips --- ### Notes - Works on **all timeframes** - **Log scale compatible** (lines adjust correctly) - No repainting – ATH only updates on confirmed highs --- **Built with Pine Script v6 – Clean, fast, reliable.** *Happy trading!*
Pine Script®指标
由SmartGatorTrader提供
1
ATH Dip Levels - Crypto Edition with Reactive TPHarika bir fikir! Bu indikatörü toplulukla paylaşırken (TradingView Public Library veya GitHub gibi), insanların stratejinin mantığını ve gücünü anlamaları için etkileyici bir İngilizce açıklama hazırladım. İşte paylaşımın için kullanabileceğin başlık, özet ve özellikler listesi: 🚀 Indicator Title: ATH Dip Levels - Crypto Reactive Strategy Overview This indicator is a specialized "Buy the Dip" and "Reactive Take Profit" system designed specifically for the high volatility of the crypto market. Instead of following lagging indicators, it focuses on the most fundamental metric: Percentage drawdown from the rolling All-Time High (ATH). It identifies historical discount zones and automatically calculates a "Reactive Take Profit" target for each entry, allowing you to scale out during market bounces. Key Features 📉 1. Dynamic Buy Zones (DCA Levels) The script tracks a rolling 220-day ATH and plots 7 distinct discount levels: Minor Pullbacks: 10%, 20% Major Corrections: 30%, 40% Capitulation / Bear Market Bottoms: 55%, 70%, 85% (Highlighted in Neon for max opportunity). 💰 2. Reactive Take Profit (The "Half-Drop" Rule) This is the core of the strategy. For every buy level triggered, the script automatically sets a "RE-SELL" target based on the severity of the drop: Logic: The profit target is exactly half of the percentage drop. Example: If you buy at a 30% dip, the target is a +15% recovery from that entry. Example: If you buy at a 70% dip, the target is a +35% recovery from that entry. This captures the natural "Dead Cat Bounce" or "Mean Reversion" common in crypto. 🧠 3. Intelligent State Management Single Trigger per Cycle: Each level triggers only once per ATH cycle to avoid "choppy" market noise. Automatic Reset: All levels and status flags reset automatically when the price makes a New ATH, preparing you for the next market cycle. 📊 4. Live Status Dashboard A clean, real-time table on the top-right shows you: Current ATH price. Which buy levels have been Hit (✅). Which profit targets have been Sold (💰). How to Use Accumulate: When price hits a green "BUY" label, it's a historical discount zone. Scale Out: When price hits the purple "RE-SELL" label, take profits on that specific position to reclaim liquidity. HODL the Rest: Use this to lower your break-even price while keeping a "moon bag" for the next ATH. Author's Note Best used on 4H and 1D timeframes. This is a mathematical approach to volatility, removing emotions from your trading.
Pine Script®指标
由ardagzkr提供
ATH/TTL & 52WH/L with Candle Coloring by RVImportance: Identifying Key Price Levels: The indicator helps identify critical price levels such as all-time highs (ATH), all-time lows (ATL), 52-week highs (52WH), and 52-week lows (52WL). These levels often act as significant support or resistance areas. Candle Color Insights: By coloring candles based on their relationship to these key levels, traders can quickly assess market sentiment and potential reversal points. Visual Representation: The plotted lines and colored candles provide a visual representation of price dynamics, aiding in trend analysis and decision-making. How to Use: Key Level Confirmation: Confirm market trends or reversals by observing how price interacts with ATH, ATL, 52WH, and 52WL levels. Breakouts or bounces from these levels can signal strong buying or selling pressure. Candle Color Signals: Pay attention to candle colors near key levels. For example, green candles above 52WH may indicate bullish momentum, while red candles below 52WL may suggest bearish pressure. Confirmation with Other Indicators: Use this indicator in conjunction with other technical indicators or chart patterns to validate trading signals. For instance, combine it with moving averages or RSI to confirm potential entry or exit points. Risk Management: Set stop-loss orders or take-profit levels based on the proximity of price to key levels. Tighten stops or consider profit-taking near significant levels to manage risk effectively. Lines Plotted: ATH Line: Represents the all-time high (ATH) levels. ATL Line: Represents the all-time low (ATL) levels. 52WH Line: Represents the 52-week high (52WH) levels. 52WL Line: Represents the 52-week low (52WL) levels. 52WH 25% Low Line: Represents 25% below the 52-week high. 52WL 30% High Line: Represents 30% above the 52-week low. Candle Coloring: Candles are colored based on their relationship to ATH, ATL, 52WH, and 52WL levels. Green: Close is above 52WH. Orange: Close is above 52WH but lower than or equal to open. Red: Close is below 52WL. Cyan: Close is below 52WL but higher than or equal to open. Additional Information: Levels for coloring candles are dynamically calculated based on percentage differences from 52WH and 52WL. Historical data is fetched to calculate ATH, ATL, 52WH, and 52WL levels. The script provides a visual representation of key price levels and candle behavior relative to these levels.
Pine Script®指标
由rupatil提供
4
ATH & 52-Week High Tracker### **Indicator Name: ATH & 52-Week High Tracker** 📌 **Description:** This indicator provides a **real-time table** displaying key stock statistics to help traders analyze price levels relative to historical highs. It includes: ✔️ **All-Time High (ATH)** price ✔️ **% Change from ATH** ✔️ **52-Week High** price ✔️ **% Change from 52-Week High** By using this indicator, traders can quickly identify how far a stock has retraced from its **historical peaks**, which can be useful for momentum trading, breakout strategies, and trend analysis. 📊 **What You Get with This Indicator:** ✅ A clear **visual table** with important stock data ✅ Quick reference to **historical price levels** ✅ Helps in identifying potential **breakout or recovery zones** ✅ Useful for both **intraday and swing traders** ⚠️ **Disclaimer:** This indicator is for **informational purposes only** and should not be considered **financial advice, a trading strategy, or a buy/sell signal.** Always conduct your own analysis and risk management before making trading decisions. 🚀📈 Let me know if you need any refinements! 😊
Pine Script®指标
由theprimedexter提供
1
ATH adjusted by Global Money SupplyHi all, Hereby a script that calculated the ATH that is corrected by the global money supply. It shows that regular ATH (based on high daily candles) as well as the ATH that is adjusted by the global money supply index. The global money supply index is calculated using the money supply on the first bar and this is then used as the reference point for the money supply in the script. The money supply is based on a lot of central banks money supplies and calculated to a USD value.
Pine Script®指标
由DynamicSignalLab提供
ATH Dip Levels - Buy on Dips This indicator is a "Buy the Dip" guide designed for assets in long-term uptrends, such as Nasdaq (QQQ) or S&P 500 (SPY). It uses a mathematical discipline to identify accumulation zones based on the rolling 220-bar All-Time High (ATH). Key Features: Dynamic Levels: Automatically calculates entry points at 3%, 5%, 10%, 15%, 25%, 35%, and 50% retracements from the recent ATH. Smart Filter: Each level is triggered only once per ATH cycle. It prevents over-trading in sideways markets; levels only reset when a brand-new high is formed. Clean Visuals: Features precise "BUY" labels at exact price points and a handy status dashboard in the top-right corner. Unified Alerts: Simplify your workflow by setting a single alert for all 7 dip levels.
Pine Script®指标
由ardagzkr提供
ATH/ATL/DaysThis indicator displays the All-Time High (ATH) and All-Time Low (ATL) — or more precisely, the highest and lowest price within the last N days. It works on any timeframe and uses only local chart data (no security() calls), ensuring stable and accurate results. It plots horizontal lines for both the ATH and ATL and includes a clean, compact table showing: Date of the extreme Days since it occurred Price % distance from current price $ distance from current price A reliable tool for identifying local extremes, spotting market structure shifts, and tracking short-term price ranges.
Pine Script®指标
由FSplinterO提供