开始

在脚本中搜索"alert"

AllTimeHighLowLibrary "AllTimeHighLow" Provides functions calculating the all-time high/low of values. hi(val) Calculates the all-time high of a series.   Parameters:      val : Series to use (`high` is used if no argument is supplied).   Returns: The all-time high for the series. lo(val) Calculates the all-time low of a series.   Parameters:      val : Series to use (`low` is used if no argument is supplied).   Returns: The all-time low for the series.
Pine Script®库
由erfan2st1提供
Red Dog Reversal IntradayAlerts and bubbles for Red Dog Reversal (RDR) Buy/Sell on intraday chart. Optionally plots prior day High/Low/Close and alerts on price crosses of those prior levels. Definitions: Red Dog Reversal (RDR) sell is when the price trades below the prior day's low , then reclaims it in the same session. This is will marked with a bubble and alerted. Red Dog Reversal (RDR) buy is when the price trades above the prior day's high , then loses it in the same session. This will be marked with a bubble and alerted. Configuration: Enable Alert Crossover to alert when price crosses over or under any prior day's level, i.e. High, Low, Close. Enable Alert Reversal to alert when Red Dog Reversal Buy or Sell. Note: To get alerts you must create alerts on your chart, and in the configuration select RDR as the condition . Then in the Alert name select RDR: Any alert() function call
Pine Script®指标
由kedzie提供
2
Mtu Macdalertcondition added to script so u ll be able to put an alert when macd goes down or up to get alert from price movement up or down when you are on indicator right click via mouse add alert select mtu macdleader then select macd go up for buy signal select macd go down for sell signal use 4 hour or daily time frame for accurate results, also works better on down trend or uptrend not trade range because macd is a trend oscilator lower time frame works too but u ll get to much alert and noise no need if u rent a daytime trader
Pine Script®指标
由Mlnklkm提供
POALibrary "POA" This library is a client script for making a webhook signal formatted string to POABOT server. entry_message(password, percent, leverage, kis_number)   Create a entry message for POABOT   Parameters:      password : (string) The password of your bot.      percent : (float) The percent for entry based on your wallet balance.      leverage : (int) The leverage of entry. If not set, your levereage doesn't change.      kis_number : (int) The number of koreainvestment account.   Returns: (string) A json formatted string for webhook message. close_message(password, percent, kis_number)   Create a close message for POABOT   Parameters:      password : (string) The password of your bot.      percent : (float) The percent for close based on your wallet balance.      kis_number : (int) The number of koreainvestment account.   Returns: (string) A json formatted string for webhook message. exit_message(password, percent)   Create a exit message for POABOT   Parameters:      password : (string) The password of your bot.      percent : (float) The percent for exit based on your wallet balance.   Returns: (string) A json formatted string for webhook message. in_trade(start_time, end_time)   Create a trade start line   Parameters:      start_time : (int) The start of time.      end_time : (int) The end of time.   Returns: (bool) Get bool for trade based on time range.
Pine Script®库
由dokang提供
8
Alerte Croisement EMA9 & SMA12 (Zone remplie)📊 Moving Average 1 Period: 9 → The average is calculated over the last 9 candles (or time periods). Shift: 0 → No shift; the average is aligned with the current data. Method: Exponential → Uses an Exponential Moving Average (EMA), which gives more weight to recent data. Apply to: Close → The average is based on the closing price of each candle. 📊 Moving Average 2 Period: 12 → Calculated over the last 12 periods. Shift: 0 → No shift. Method: Simple → Uses a Simple Moving Average (SMA), which gives equal weight to each period. Apply to: Close → Based on closing prices.
Pine Script®指标
由kelyanani21提供
thors_forex_factory_utilityLibrary "forex_factory_utility" Supporting Utility Library for the Live Economic Calendar by toodegrees Indicator; responsible for data handling, and plotting news event data. isLeapYear()   Finds if it's currently a leap year or not.   Returns: Returns True if the current year is a leap year. daysMonth(M)   Provides the days in a given month of the year, adjusted during leap years.   Parameters:      M (int) : Month in numerical integer format (i.e. Jan=1).   Returns: Days in the provided month. MMM(M)   Converts a month from a numerical integer format to a MMM format (i.e. 'Jan').   Parameters:      M (int) : Month in numerical integer format (i.e. Jan=1).   Returns: Month in MMM format (i.e. 'Jan'). dow(D)   Converts a numbered day of the week string in format to 'DDD' format (i.e. "1" = Sun).   Parameters:      D (string) : Numbered day of the week from 1 to 7, starting on Sunday.   Returns: Returns the day of the week in 'DDD' format (i.e. "Fri"). size(S, N)   Converts a size string into the corresponding Pine Script v5 format, or N times smaller/bigger.   Parameters:      S (string) : Size string: "Tiny", "Small", "Normal", "Large", or "Huge".      N (int) : Size variation, can be positive (larger than S), or negative (smaller than S).   Returns: Size string in Pine Script v5 format. lineStyle(S)   Converts a line style string into the corresponding Pine Script v5 format.   Parameters:      S (string) : Line style string: "Dashed", "Dotted" or "Solid".   Returns: Line style string in Pine Script v5 format. lineTrnsp(S)   Converts a transparency style string into the corresponding integer value.   Parameters:      S (string) : Line style string: "Light", "Medium" or "Heavy".   Returns: Transparency integer. boxLoc(X, Y)   Converts position strings of X and Y into a table position in Pine Script v5 format.   Parameters:      X (string) : X-axis string: "Left", "Center", or "Right".      Y (string) : Y-axis string: "Top", "Middle", or "Bottom".   Returns: Table location string in Pine Script v5 format. method bubbleSort_NewsTOD(N)   Performs bubble sort on a Forex Factory News array of all news from the same date, ordering them in ascending order based on the time of the day.   Namespace types: array   Parameters:      N (array) : Forex Factory News array.   Returns: void bubbleSort_News(N)   Performs bubble sort on a Forex Factory News array, ordering them in ascending order based on the time of the day, and date.   Parameters:      N (array) : Forex Factory News array.   Returns: Sorted Forex Factory News array. weekNews(N, C, I)   Creates a Forex Factory News array containing the current week's Forex Factory News.   Parameters:      N (array) : Forex Factory News array containing this week's unfiltered Forex Factory News.      C (array) : Currency filter array (string array).      I (array) : Impact filter array (color array).   Returns: Forex Factory News array containing the current week's Forex Factory News. todayNews(W, D, M)   Creates a Forex Factory News array containing the current day's Forex Factory News.   Parameters:      W (array) : Forex Factory News array containing this week's Forex Factory News.      D (array) : Forex Factory News array for the current day's Forex Factory News.      M (bool) : Boolean that marks whether the current chart has a Day candle-switch at Midnight New York Time.   Returns: Forex Factory News array containing the current day's Forex Factory News. adjustTimezone(N, TZH, TZM)   Transposes the Time of the Day, and Date, in the Forex Factory News Table to a custom Timezone.   Parameters:      N (array) : Forex Factory News array.      TZH (int) : Custom Timezone hour.      TZM (int) : Custom Timezone minute.   Returns: Reformatted Forex Factory News array. NewsAMPM_TOD(N)   Reformats the Time of the Day in the Forex Factory News Table to AM/PM format.   Parameters:      N (array) : Forex Factory News array.   Returns: Reformatted Forex Factory News array. impFilter(X, L, M, H)   Creates a filter array from the User's desired Forex Facory News to be shown based on Impact.   Parameters:      X (bool) : Boolean - if True Holidays listed on Forex Factory will be shown.      L (bool) : Boolean - if True Low Impact listed on Forex Factory News will be shown.      M (bool) : Boolean - if True Medium Impact listed on Forex Factory News will be shown.      H (bool) : Boolean - if True High Impact listed on Forex Factory News will be shown.   Returns: Color array with the colors corresponding to the Forex Factory News to be shown. curFilter(A, C1, C2, C3, C4, C5, C6, C7, C8, C9)   Creates a filter array from the User's desired Forex Facory News to be shown based on Currency.   Parameters:      A (bool) : Boolean - if True News related to the current Chart's symbol listed on Forex Factory will be shown.      C1 (bool) : Boolean - if True News related to the Australian Dollar listed on Forex Factory will be shown.      C2 (bool) : Boolean - if True News related to the Canadian Dollar listed on Forex Factory will be shown.      C3 (bool) : Boolean - if True News related to the Swiss Franc listed on Forex Factory will be shown.      C4 (bool) : Boolean - if True News related to the Chinese Yuan listed on Forex Factory will be shown.      C5 (bool) : Boolean - if True News related to the Euro listed on Forex Factory will be shown.      C6 (bool) : Boolean - if True News related to the British Pound listed on Forex Factory will be shown.      C7 (bool) : Boolean - if True News related to the Japanese Yen listed on Forex Factory will be shown.      C8 (bool) : Boolean - if True News related to the New Zealand Dollar listed on Forex Factory will be shown.      C9 (bool) : Boolean - if True News related to the US Dollar listed on Forex Factory will be shown.   Returns: String array with the currencies corresponding to the Forex Factory News to be shown. FF_OnChartLine(N, T, S)   Plots vertical lines where a Forex Factory News event will occur, or has already occurred.   Parameters:      N (array) : News-type array containing all the Forex Factory News.      T (int) : Transparency integer value (0-100) for the lines.      S (string) : Line style in Pine Script v5 format.   Returns: void method updateStringMatrix(M, P, V)   Updates a string Matrix containing the tooltips for Forex Factory News Event information for a given candle.   Namespace types: matrix   Parameters:      M (matrix) : String matrix.      P (int) : Position (row) of the Matrix to update based on the impact.      V (string) : information to push to the Matrix.   Returns: void FF_OnChartLabel(N, Y, S, O)   Plots labels where a Forex Factory News has already occurred based on its/their impact.   Parameters:      N (array) : News-type array containing all the Forex Factory News.      Y (string) : String that gives direction on where to plot the label (options= "Above", "Below", "Auto").      S (string) : Label size in Pine Script v5 format.      O (bool) : Show outline of labels?   Returns: void historical(T, D, W, X)   Deletes Forex Factory News drawings which are ourside a specific Time window.   Parameters:      T (int) : Number of days input used for Forex Factory News drawings' history.      D (bool) : Boolean that when true will only display Forex Factory News drawings of the current day.      W (bool) : Boolean that when true will only display Forex Factory News drawings of the current week.      X (string) : String that gives direction on what lines to plot based on Time (options= "Future", "Both").   Returns: void newTable(P, B)   Creates a new Table object with parameters tailored to the Forex Factory News Table.   Parameters:      P (string) : Position string for the Table, in Pine Script v5 format.      B (color) : Border and frame color for the News Table.   Returns: Empty Forex Factory News Table. resetTable(P, S, headTextC, headBgC, B)   Resets a Table object with parameters and headers tailored to the Forex Factory News Table.   Parameters:      P (string) : Position string for the Table, in Pine Script v5 format.      S (string) : Size string for the Table's text, in Pine Script v5 format.      headTextC (color)      headBgC (color)      B (color) : Border and frame color for the News Table.   Returns: Empty Forex Factory News Table. logNews(N, TBL, R, S, rowTextC, rowBgC)   Adds an event to the Forex Factory News Table.   Parameters:      N (News) : News-type object.      TBL (table) : Forex Factory News Table object to add the News to.      R (int) : Row to add the event to in the Forex Factory News Table.      S (string) : Size string for the event's text, in Pine Script v5 format.      rowTextC (color)      rowBgC (color)   Returns: void FF_Table(N, P, S, headTextC, headBgC, rowTextC, rowBgC, B)   Creates the Forex Factory News Table.   Parameters:      N (array) : News-type array containing all the Forex Factory News.      P (string) : Position string for the Table, in Pine Script v5 format.      S (string) : Size string for the Table's text, in Pine Script v5 format.      headTextC (color)      headBgC (color)      rowTextC (color)      rowBgC (color)      B (color) : Border and frame color for the News Table.   Returns: Forex Factory News Table. timeline(N, T, F, TZH, TZM, D)   Shades Forex Factory News events in the Forex Factory News Table after they occur.   Parameters:      N (array) : News-type array containing all the Forex Factory News.      T (table) : Forex Facory News table object.      F (color) : Color used as shading once the Forex Factory News has occurred.      TZH (int) : Custom Timezone hour, if any.      TZM (int) : Custom Timezone minute, if any.      D (bool) : Daily Forex Factory News flag.   Returns: Forex Factory News Table. News   Custom News type which contains informatino about a Forex Factory News Event.   Fields:      dow (series string) : Day of the week, in DDD format (i.e. 'Mon').      dat (series string) : Date, in MMM D format (i.e. 'Jan 1').      _t (series int)      tod (series string) : Time of the day, in hh:mm 24-Hour format (i.e 17:10).      cur (series string) : Currency, in CCC format (i.e. "USD").      imp (series color) : Impact, the respective impact color for Forex Factory News Events.      ttl (series string) : Title, encoded in a custom number mapping (see the toodegrees/toodegrees_forex_factory library to learn more).      tmst (series int)      ln (series line)
Pine Script®库
由cegb001提供
TrailingStopLibraryLibrary "TrailingStopLibrary" 专业移动止盈库 - 为Pine Script策略提供完整的追踪止盈功能。支持做多做空双向交易，基于风险回报比智能激活，提供收盘价和高低价两种判断模式。包含完整的状态管理、调试信息和易用的API接口。适用于股票、外汇、加密货币等各种市场的风险管理。 @version 1.0 @author runto2006 new_config(enabled, activation_ratio, pullback_percent, price_type)   创建移动止盈配置对象   Parameters:      enabled (bool) : (bool) 是否启用移动止盈，默认true      activation_ratio (float) : (float) 激活盈亏比，默认4.0，表示盈利4倍止损距离时激活      pullback_percent (float) : (float) 回撤百分比，默认1.0，表示回撤1%时触发止盈      price_type (string) : (string) 价格类型，默认"close"。"close"=收盘价模式，"hl"=高低价模式   Returns: Config 配置对象 new_state()   创建移动止盈状态对象   Returns: State 初始化的状态对象 reset(state)   重置移动止盈状态   Parameters:      state (State) : (State) 要重置的状态对象   Returns: void calc_activation_target(entry_price, stop_price, activation_ratio, is_long)   计算激活目标价格   Parameters:      entry_price (float) : (float) 入场价格      stop_price (float) : (float) 止损价格      activation_ratio (float) : (float) 激活盈亏比      is_long (bool) : (bool) 是否为多头持仓   Returns: float 激活目标价格，如果输入无效则返回na get_check_price(price_type, is_long, for_activation)   获取用于判断的价格   Parameters:      price_type (string) : (string) 价格类型："close"或"hl"      is_long (bool) : (bool) 是否为多头持仓      for_activation (bool) : (bool) 是否用于激活判断，影响高低价的选择方向   Returns: float 当前判断价格 check_activation(config, state, entry_price, stop_price, is_long, has_position)   检查是否应该激活移动止盈   Parameters:      config (Config) : (Config) 移动止盈配置      state (State) : (State) 移动止盈状态      entry_price (float) : (float) 入场价格      stop_price (float) : (float) 止损价格      is_long (bool) : (bool) 是否为多头持仓      has_position (bool) : (bool) 是否有持仓   Returns: bool 是否成功激活 update_tracking(config, state, is_long)   更新移动止盈的追踪价格   Parameters:      config (Config) : (Config) 移动止盈配置      state (State) : (State) 移动止盈状态      is_long (bool) : (bool) 是否为多头持仓   Returns: void check_trigger(config, state, entry_price, is_long)   检查是否触发移动止盈   Parameters:      config (Config) : (Config) 移动止盈配置      state (State) : (State) 移动止盈状态      entry_price (float) : (float) 入场价格      is_long (bool) : (bool) 是否为多头持仓   Returns: bool 是否触发止盈 process(config, state, entry_price, stop_price, is_long, has_position)   一体化处理移动止盈逻辑   Parameters:      config (Config) : (Config) 移动止盈配置      state (State) : (State) 移动止盈状态      entry_price (float) : (float) 入场价格      stop_price (float) : (float) 止损价格      is_long (bool) : (bool) 是否为多头持仓      has_position (bool) : (bool) 是否有持仓   Returns: bool 是否触发止盈 get_trigger_price(config, state, is_long)   获取当前触发价格   Parameters:      config (Config) : (Config) 移动止盈配置      state (State) : (State) 移动止盈状态      is_long (bool) : (bool) 是否为多头持仓   Returns: float 触发价格，未激活时返回na get_pullback_percent(config, state, entry_price, is_long)   计算当前回撤百分比   Parameters:      config (Config) : (Config) 移动止盈配置      state (State) : (State) 移动止盈状态      entry_price (float) : (float) 入场价格      is_long (bool) : (bool) 是否为多头持仓   Returns: float 当前回撤百分比，未激活时返回na get_status_info(config, state, entry_price, is_long)   获取状态信息字符串（用于调试）   Parameters:      config (Config) : (Config) 移动止盈配置      state (State) : (State) 移动止盈状态      entry_price (float) : (float) 入场价格      is_long (bool) : (bool) 是否为多头持仓   Returns: string 详细的状态信息 Config   移动止盈配置对象   Fields:      enabled (series bool) : (bool) 是否启用移动止盈功能      activation_ratio (series float) : (float) 激活盈亏比 - 盈利达到止损距离的多少倍时激活追踪      pullback_percent (series float) : (float) 回撤百分比 - 从最优价格回撤多少百分比时触发止盈      price_type (series string) : (string) 价格判断类型 - "close"使用收盘价，"hl"使用高低价 State   移动止盈状态对象   Fields:      activated (series bool) : (bool) 是否已激活追踪止盈      highest_price (series float) : (float) 激活后记录的最高价格      lowest_price (series float) : (float) 激活后记录的最低价格      activation_target (series float) : (float) 激活目标价格
Pine Script®库
由l1869688提供
OHLCVDataOHLCV Data Power Library Multi-Timeframe Market Data with Mathematical Precision 📌 Overview This Pine Script library provides structured OHLCV (Open, High, Low, Close, Volume) data across multiple timeframes using mathematically significant candle counts (powers of 3). Designed for technical analysts who work with fractal market patterns and need efficient access to higher timeframe data. ✨ Key Features 6 Timeframes: 5min, 1H, 4H, 6H, 1D, and 1W data Power-of-3 Candle Counts: 3, 9, 27, 81, and 243 bars Structured Data: Returns clean OHLCV objects with all price/volume components Pine Script Optimized: Complies with all security() call restrictions 📊 Timeframe Functions pinescript f_get5M_3() // 3 candles of 5min data f_get1H_27() // 27 candles of 1H data f_get1D_81() // 81 candles of daily data // ... and 27 other combinations 🚀 Usage Example pinescript import YourName/OHLCVData/1 as OHLCV weeklyData = OHLCV.f_get1W_27() // Get 27 weekly candles latestHigh = array.get(weeklyData, 0).high plot(latestHigh, "Weekly High") 💡 Ideal For Multi-timeframe analysis Volume-profile studies Fractal pattern detection Higher timeframe confirmation ⚠️ Note Replace "YourName" with your publishing username All functions return arrays of OHLCV objects Maximum lookback = 243 candles 📜 Version History 1.0 - Initial release (2024)
Pine Script®库
由viorel8提供
FA_PA_LIBLibrary "FA_PA_LIB" A collection of custom tools & utility functions commonly used for coding Dr Al Brooks, Price Action System with my scripts getBodySize()   Gets the current candle's body size (in POINTS, divide by 10 to get pips)   Returns: The current candle's body size in POINTS getTopWickSize()   Gets the current candle's top wick size (in POINTS, divide by 10 to get pips)   Returns: The current candle's top wick size in POINTS getTopWickPercent()   Gets the current candle's top wick size (in POINTS, divide by 10 to get pips)   Returns: Percent of total candle width that is occupied by the upper wick getBottomWickSize()   Gets the current candle's bottom wick size (in POINTS, divide by 10 to get pips)   Returns: The current candle's bottom wick size in POINTS getBottomWickPercent()   Gets the current candle's bottom wick size (in POINTS, divide by 10 to get pips)   Returns: Percent of total candle width that is occupied by the lower wick getBarMidPoint()   Gets the current candle's midpoint wick to wick   Returns: The current candle's mid point getBodyPercent()   Gets the current candle's body size as a percentage of its entire size including its wicks   Returns: The current candle's body size percentage (00.00) bullFib(priceLow, priceHigh, fibRatio)   Calculates a bullish fibonacci value   Parameters:      priceLow (float) : The lowest price point      priceHigh (float) : The highest price point      fibRatio (float) : The fibonacci % ratio to calculate   Returns: The fibonacci value of the given ratio between the two price points bearFib(priceLow, priceHigh, fibRatio)   Calculates a bearish fibonacci value   Parameters:      priceLow (float) : The lowest price point      priceHigh (float) : The highest price point      fibRatio (float) : The fibonacci % ratio to calculate   Returns: The fibonacci value of the given ratio between the two price points isBr()   Checks if the current bar is a Bear Bar   Returns: A boolean - true if the current bar is bear candle isBl()   Checks if the current bar is a Bull Bar   Returns: A boolean - true if the current bar is Bull candle isTrendBar()   Checks if the current bar is a Trend Bar. Candle that its body size is greater than 50% of entire candle size   Returns: A boolean - true if the current bar is Trend candle isBlTrendBar()   Checks if the current bar is a Bull Trend Bar. Bullish candle that its body size is greater than 50% of entire candle size   Returns: A boolean - true if the current bar is Bull Trend candle isBrTrendBar()   Checks if the current bar is a Bull Trend Bar. Bullish candle that its body size is greater than 50% of entire candle size   Returns: A boolean - true if the current bar is Bull Trend candle isBlRevB()   Checks if the current bar is a Bull Reversal Bar. Bullish candle that closes on upper half of candle body   Returns: A boolean - true if the current bar is Bull Reversal candle isBrRevB()   Checks if the current bar is a Bear Reversal Bar. BulBearish candle that closes on lower half of candle body   Returns: A boolean - true if the current bar is Bear Reversal candle isDoji(wickSize, bodySize)   Checks if the current bar is a doji candle based on the given parameters   Parameters:      wickSize (float) : (default=2) The maximum top wick size compared to the bottom (and vice versa)      bodySize (float) : (default=0.05) The maximum body size as a percentage compared to the entire candle size   Returns: A boolean - true if the current bar matches the requirements of a doji candle isHammer(fib, colorMatch)   Checks if the current bar is a hammer candle based on the given parameters   Parameters:      fib (float) : (default=0.382) The fib to base candle body on      colorMatch (bool) : (default=true) Does the candle need to be green? (true/false)   Returns: A boolean - true if the current bar matches the requirements of a hammer candle isStar(fib, colorMatch)   Checks if the current bar is a shooting star candle based on the given parameters   Parameters:      fib (float) : (default=0.382) The fib to base candle body on      colorMatch (bool) : (default=false) Does the candle need to be red? (true/false)   Returns: A boolean - true if the current bar matches the requirements of a shooting star candle isBlOB()   Detects Bullish outside bars(OB)   Returns: Returns true if the current bar is a bull outside bar isBrOB()   Detects Bearish outside bars(OB)   Returns: Returns true if the current bar is a bear outside bar
Pine Script®库
由Alireza_PH提供
Milvetti_Pineconnector_LibraryLibrary "Milvetti_Pineconnector_Library" This library has methods that provide practical signal transmission for Pineconnector.Developed By Milvetti buy(licenseId, symbol, risk, sl, tp, beTrigger, beOffset, trailTrig, trailDist, trailStep, atrTimeframe, atrTrigger, atrPeriod, atrMultiplier, atrShift, spread, accFilter, secret, comment)   Create a buy order message   Parameters:      licenseId (string) : License Id. This is a unique identifier found in the Pineconnector Licensing Dashboard.      symbol (string) : Symbol. Default is syminfo.ticker      risk (float) : Risk. Function depends on the “Volume Type” selected in the EA      sl (float) : StopLoss. Place stop-loss. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      tp (float) : TakeProfit. Place take-profit. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      beTrigger (float) : Breakeven will be activated after the position gains this number of pips. Ensure > 0      beOffset (float) : Offset from entry price. 0 means the SL will be placed exactly at entry price. 1 means 1 pip above the entry price for buy trades and 1 pip below for sell trades.      trailTrig (int) : Trailing stop-loss will be activated after a trade gains this number of pips. Default is 0(inactive)      trailDist (int) : SL will be opened at traildist after trailtrig is met, even if you do not have a SL placed.. Default is 0(inactive)      trailStep (int) : Moves trailing stop-loss once price moves to favourable by a specified number of pips. Default is 0(inactive)      atrTimeframe (string) : ATR Trailing Stop will be based on the specified timeframe in minutes and will only update once per bar close. Default is Timeframe.Period      atrTrigger (float) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default is 0(inactive)      atrPeriod (int) : ATR averaging period. Default is 0      atrMultiplier (float) : Multiple of ATR to utilise in the new SL computation. Default is 1      atrShift (float) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default is 0      spread (float) : Enter the position only if the spread is equal or less than the specified value in pips. Default is 0(inactive)      accFilter (float) : Enter the position only if the account requirement is met. Default is 0(inactive)      secret (string)      comment (string) : Comment. Add a string into the order’s comment section. Default is "Symbol+Timeframe" sell(licenseId, symbol, risk, sl, tp, beTrigger, beOffset, trailTrig, trailDist, trailStep, atrTimeframe, atrTrigger, atrPeriod, atrMultiplier, atrShift, spread, accFilter, secret, comment)   Create a buy order message   Parameters:      licenseId (string) : License Id. This is a unique identifier found in the Pineconnector Licensing Dashboard.      symbol (string) : Symbol. Default is syminfo.ticker      risk (float) : Risk. Function depends on the “Volume Type” selected in the EA      sl (float) : StopLoss. Place stop-loss. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      tp (float) : TakeProfit. Place take-profit. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      beTrigger (float) : Breakeven will be activated after the position gains this number of pips. Ensure > 0      beOffset (float) : Offset from entry price. 0 means the SL will be placed exactly at entry price. 1 means 1 pip above the entry price for buy trades and 1 pip below for sell trades.      trailTrig (int) : Trailing stop-loss will be activated after a trade gains this number of pips. Default is 0(inactive)      trailDist (int) : SL will be opened at traildist after trailtrig is met, even if you do not have a SL placed.. Default is 0(inactive)      trailStep (int) : Moves trailing stop-loss once price moves to favourable by a specified number of pips. Default is 0(inactive)      atrTimeframe (string) : ATR Trailing Stop will be based on the specified timeframe in minutes and will only update once per bar close. Default is Timeframe.Period      atrTrigger (float) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default is 0(inactive)      atrPeriod (int) : ATR averaging period. Default is 0      atrMultiplier (float) : Multiple of ATR to utilise in the new SL computation. Default is 1      atrShift (float) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default is 0      spread (float) : Enter the position only if the spread is equal or less than the specified value in pips. Default is 0(inactive)      accFilter (float) : Enter the position only if the account requirement is met. Default is 0(inactive)      secret (string)      comment (string) : Comment. Add a string into the order’s comment section. Default is "Symbol+Timeframe" buyLimit(licenseId, symbol, pending, risk, sl, tp, beTrigger, beOffset, trailTrig, trailDist, trailStep, atrTimeframe, atrTrigger, atrPeriod, atrMultiplier, atrShift, spread, accFilter, secret, comment)   Create a buy limit order message   Parameters:      licenseId (string) : License Id. This is a unique identifier found in the Pineconnector Licensing Dashboard.      symbol (string) : Symbol. Default is syminfo.ticker      pending (float) : Computing pending order entry price. EA Options: Pips, Specified Price, Percentage      risk (float) : Risk. Function depends on the “Volume Type” selected in the EA      sl (float) : StopLoss. Place stop-loss. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      tp (float) : TakeProfit. Place take-profit. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      beTrigger (float) : Breakeven will be activated after the position gains this number of pips. Ensure > 0      beOffset (float) : Offset from entry price. 0 means the SL will be placed exactly at entry price. 1 means 1 pip above the entry price for buy trades and 1 pip below for sell trades.      trailTrig (int) : Trailing stop-loss will be activated after a trade gains this number of pips. Default is 0(inactive)      trailDist (int) : SL will be opened at traildist after trailtrig is met, even if you do not have a SL placed.. Default is 0(inactive)      trailStep (int) : Moves trailing stop-loss once price moves to favourable by a specified number of pips. Default is 0(inactive)      atrTimeframe (string) : ATR Trailing Stop will be based on the specified timeframe in minutes and will only update once per bar close. Default is Timeframe.Period      atrTrigger (float) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default is 0(inactive)      atrPeriod (int) : ATR averaging period. Default is 0      atrMultiplier (float) : Multiple of ATR to utilise in the new SL computation. Default is 1      atrShift (float) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default is 0      spread (float) : Enter the position only if the spread is equal or less than the specified value in pips. Default is 0(inactive)      accFilter (float) : Enter the position only if the account requirement is met. Default is 0(inactive)      secret (string)      comment (string) : Comment. Add a string into the order’s comment section. Default is "Symbol+Timeframe" buyStop(licenseId, symbol, pending, risk, sl, tp, beTrigger, beOffset, trailTrig, trailDist, trailStep, atrTimeframe, atrTrigger, atrPeriod, atrMultiplier, atrShift, spread, accFilter, secret, comment)   Create a buy stop order message   Parameters:      licenseId (string) : License Id. This is a unique identifier found in the Pineconnector Licensing Dashboard.      symbol (string) : Symbol. Default is syminfo.ticker      pending (float) : Computing pending order entry price. EA Options: Pips, Specified Price, Percentage      risk (float) : Risk. Function depends on the “Volume Type” selected in the EA      sl (float) : StopLoss. Place stop-loss. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      tp (float) : TakeProfit. Place take-profit. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      beTrigger (float) : Breakeven will be activated after the position gains this number of pips. Ensure > 0      beOffset (float) : Offset from entry price. 0 means the SL will be placed exactly at entry price. 1 means 1 pip above the entry price for buy trades and 1 pip below for sell trades.      trailTrig (int) : Trailing stop-loss will be activated after a trade gains this number of pips. Default is 0(inactive)      trailDist (int) : SL will be opened at traildist after trailtrig is met, even if you do not have a SL placed.. Default is 0(inactive)      trailStep (int) : Moves trailing stop-loss once price moves to favourable by a specified number of pips. Default is 0(inactive)      atrTimeframe (string) : ATR Trailing Stop will be based on the specified timeframe in minutes and will only update once per bar close. Default is Timeframe.Period      atrTrigger (float) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default is 0(inactive)      atrPeriod (int) : ATR averaging period. Default is 0      atrMultiplier (float) : Multiple of ATR to utilise in the new SL computation. Default is 1      atrShift (float) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default is 0      spread (float) : Enter the position only if the spread is equal or less than the specified value in pips. Default is 0(inactive)      accFilter (float) : Enter the position only if the account requirement is met. Default is 0(inactive)      secret (string)      comment (string) : Comment. Add a string into the order’s comment section. Default is "Symbol+Timeframe" sellLimit(licenseId, symbol, pending, risk, sl, tp, beTrigger, beOffset, trailTrig, trailDist, trailStep, atrTimeframe, atrTrigger, atrPeriod, atrMultiplier, atrShift, spread, accFilter, secret, comment)   Create a sell limit order message   Parameters:      licenseId (string) : License Id. This is a unique identifier found in the Pineconnector Licensing Dashboard.      symbol (string) : Symbol. Default is syminfo.ticker      pending (float) : Computing pending order entry price. EA Options: Pips, Specified Price, Percentage      risk (float) : Risk. Function depends on the “Volume Type” selected in the EA      sl (float) : StopLoss. Place stop-loss. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      tp (float) : TakeProfit. Place take-profit. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      beTrigger (float) : Breakeven will be activated after the position gains this number of pips. Ensure > 0      beOffset (float) : Offset from entry price. 0 means the SL will be placed exactly at entry price. 1 means 1 pip above the entry price for buy trades and 1 pip below for sell trades.      trailTrig (int) : Trailing stop-loss will be activated after a trade gains this number of pips. Default is 0(inactive)      trailDist (int) : SL will be opened at traildist after trailtrig is met, even if you do not have a SL placed.. Default is 0(inactive)      trailStep (int) : Moves trailing stop-loss once price moves to favourable by a specified number of pips. Default is 0(inactive)      atrTimeframe (string) : ATR Trailing Stop will be based on the specified timeframe in minutes and will only update once per bar close. Default is Timeframe.Period      atrTrigger (float) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default is 0(inactive)      atrPeriod (int) : ATR averaging period. Default is 0      atrMultiplier (float) : Multiple of ATR to utilise in the new SL computation. Default is 1      atrShift (float) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default is 0      spread (float) : Enter the position only if the spread is equal or less than the specified value in pips. Default is 0(inactive)      accFilter (float) : Enter the position only if the account requirement is met. Default is 0(inactive)      secret (string)      comment (string) : Comment. Add a string into the order’s comment section. Default is "Symbol+Timeframe" sellStop(licenseId, symbol, pending, risk, sl, tp, beTrigger, beOffset, trailTrig, trailDist, trailStep, atrTimeframe, atrTrigger, atrPeriod, atrMultiplier, atrShift, spread, accFilter, secret, comment)   Create a sell stop order message   Parameters:      licenseId (string) : License Id. This is a unique identifier found in the Pineconnector Licensing Dashboard.      symbol (string) : Symbol. Default is syminfo.ticker      pending (float) : Computing pending order entry price. EA Options: Pips, Specified Price, Percentage      risk (float) : Risk. Function depends on the “Volume Type” selected in the EA      sl (float) : StopLoss. Place stop-loss. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      tp (float) : TakeProfit. Place take-profit. Computation is based on the Target Type selected in the EA. Default is 0(inactive)      beTrigger (float) : Breakeven will be activated after the position gains this number of pips. Ensure > 0      beOffset (float) : Offset from entry price. 0 means the SL will be placed exactly at entry price. 1 means 1 pip above the entry price for buy trades and 1 pip below for sell trades.      trailTrig (int) : Trailing stop-loss will be activated after a trade gains this number of pips. Default is 0(inactive)      trailDist (int) : SL will be opened at traildist after trailtrig is met, even if you do not have a SL placed.. Default is 0(inactive)      trailStep (int) : Moves trailing stop-loss once price moves to favourable by a specified number of pips. Default is 0(inactive)      atrTimeframe (string) : ATR Trailing Stop will be based on the specified timeframe in minutes and will only update once per bar close. Default is Timeframe.Period      atrTrigger (float) : Activate the trigger of ATR Trailing after market moves favourably by a number of pips. Default is 0(inactive)      atrPeriod (int) : ATR averaging period. Default is 0      atrMultiplier (float) : Multiple of ATR to utilise in the new SL computation. Default is 1      atrShift (float) : Relative shift of price information, 0 uses latest candle, 1 uses second last, etc. Default is 0      spread (float) : Enter the position only if the spread is equal or less than the specified value in pips. Default is 0(inactive)      accFilter (float) : Enter the position only if the account requirement is met. Default is 0(inactive)      secret (string)      comment (string) : Comment. Add a string into the order’s comment section. Default is "Symbol+Timeframe"
Pine Script®库
由Milvetti提供
TradersPost WebhookMessage Library - Automatically Build JSONLibrary "WebhookMessageLibrary" The webhook message library provides several functions for building JSON payloads method buildWebhookJson(msg, constants)   Builds the final JSON payload from a webhookMessage type.   Namespace types: webhookMessage   Parameters:      msg (webhookMessage) : (webhookMessage) A prepared webhookMessage.      constants (CONSTANTS)   Returns: A JSON Payload. method buildTakeProfitJson(msg)   Builds the takeProfit JSON message to be used in a webhook message.   Namespace types: takeProfitMessage   Parameters:      msg (takeProfitMessage) : (takeProfitMessage)   Returns: A JSON takeProfit payload. method buildStopLossJson(msg, constants)   Builds the stopLoss JSON message to be used in a webhook message.   Namespace types: stopLossMessage   Parameters:      msg (stopLossMessage) : (stopLossMessage)      constants (CONSTANTS)   Returns: A JSON stopLoss payload. CONSTANTS   Constants for payload values.   Fields:      ACTION_BUY (series string)      ACTION_SELL (series string)      ACTION_EXIT (series string)      ACTION_CANCEL (series string)      ACTION_ADD (series string)      SENTIMENT_BULLISH (series string)      SENTIMENT_BEARISH (series string)      SENTIMENT_LONG (series string)      SENTIMENT_SHORT (series string)      SENTIMENT_FLAT (series string)      STOP_LOSS_TYPE_STOP (series string)      STOP_LOSS_TYPE_STOP_LIMIT (series string)      STOP_LOSS_TYPE_TRAILING_STOP (series string) webhookMessage   Final webhook message.   Fields:      ticker (series string)      action (series string)      sentiment (series string)      price (series float)      quantity (series int)      takeProfit (series string)      stopLoss (series string) takeProfitMessage   Take profit message.   Fields:      limitPrice (series float)      percent (series float)      amount (series float) stopLossMessage   Stop loss message.   Fields:      type (series string)      percent (series float)      amount (series float)      stopPrice (series float)      limitPrice (series float)      trailPrice (series float)      trailPercent (series float)
Pine Script®库
由TradersPostInc提供
1