开始

在脚本中搜索"弘历投教boll指标代码分析"

BBMA : Bollinger Band & Moving AverageBased on trading technique by Mr Oma Ally, Technical Analysis Guru. 1. Bollinger Band - standard setting, MA20, Dev = 2 2. EMA 50 ( Line Color = Aqua ) 3. WMA High ( wma5 High and wma10 High ) Area Pink : WMA5 High < WMA10 High Area Gray : WMA5 High > WMA10 High 4. WMA Low ( wma5 Low and wma10 Low ) Area Green : WMA5 Low > WMA10 Low Area Gray : WMA5 Low < WMA10 Low 5. If you wish to see wma lines, adjust the transparency at the menu. This is just an indicator setting. For technique and how to apply for trading, kindly please refer to web/youtube/class/etc :)
Pine Script®指标
由gentradex28提供
4
CryptoBandsGuru MultiColor Bollinger BandsHere are my Bollinger Bands that come with 2 std dev bands and a variety of moving averages. The bands can have shading between the bands and the middle section can be shaded. Moving Averages include: SMA EMA Weighted Hull Symmetrical Volume Weighted Wilder Right now my 2 favorites are the Hull with a std dev of .5 and the Wilder with a std dev of 1.7 and 2.0. You can get some really good signals buy putting both on the same chart. The faster Hull will move above and below the slower Wilder and show good price action.
Pine Script®指标
由GoldBands提供
2
Multi SMA EMA WMA HMA BB (4x5 MAs Bollinger Bands) Adv MTF - RRBMulti SMA EMA WMA HMA 4x5 Moving Averages with Bollinger Bands Advanced MTF by RagingRocketBull 2019 Version 1.0 This indicator shows multiple MAs of any type SMA EMA WMA HMA etc with BB and MTF support, can show MAs as dynamically moving levels. There are 4 MA groups + 1 BB group, a total of 4 TFs * 5 MAs = 20 MAs. You can assign any type/timeframe combo to a group, for example: - EMAs 12,26,50,100,200 x H1, H4, D1, W1 (4 TFs x 5 MAs x 1 type) - EMAs 8,10,13,21,30,50,55,100,200,400 x M15, H1 (2 TFs x 10 MAs x 1 type) - D1 EMAs and SMAs 8,10,12,26,30,50,55,100,200,400 (1 TF x 10 MAs x 2 types) - H1 WMAs 7,77,89,167,231; H4 HMAs 12,26,50,100,200; D1 EMAs 89,144,169,233,377; W1 SMAs 12,26,50,100,200 (4 TFs x 5 MAs x 4 types) - +1 extra MA type/timeframe for BB There are several versions: Simple, MTF, Pro MTF, Advanced MTF and Ultimate MTF. This is the Advanced MTF version. The Differences are listed below. All versions have BB - Simple: you have 2 groups of MAs that can be assigned any type (5+5) - MTF: +2 custom Timeframes for each group (2x5 MTF) +1 TF for BB, TF XY smoothing - Pro MTF: 4 custom Timeframes for each group (4x3 MTF), 1 TF for BB, MA levels and show max bars back options - Advanced MTF: +2 extra MAs/group (4x5 MTF), custom Ticker/Symbols, Timeframe <>= filter, Remove Duplicates Option - Ultimate MTF: +individual settings for each MA, custom Ticker/Symbols Features: - 4x5 = 20 MAs of any type - 4x MTF groups with XY step line smoothing - +1 extra TF/type for BB MAs - 4x5 = 20 MA levels with adjustable group offsets, indents and shift - supports any existing type of MA: SMA, EMA, WMA, Hull Moving Average (HMA) - custom tickers/symbols for each group - you can compare MAs of the same symbol across exchanges - show max bars back option - show/hide both groups of MAs/levels/BB and individual MAs - timeframe filter: show only MAs/Levels with TFs <>= Current TF - hide MAs/Levels with duplicate TFs - support for custom TFs that are not available in free accounts: 2D, 3D etc - support for timeframes in H: H, 2H, 4H etc Notes: - Uses timeframe textbox instead of input resolution dropdown to allow for 240 120 and other custom TFs - Uses symbol textbox instead of input symbol to avoid establishing multiple dummy security connections to the current ticker - otherwise empty symbols will prevent script from running - Possible reasons for missing MAs on a chart: - there may not be enough bars in history to start plotting it. For example, W1 EMA200 needs at least 200 bars on a weekly chart. - price << default Y smoothing step 5. For charts with low/fractional prices (i.e. 0.00002 << 5) adjust X Y smoothing as needed (set Y = 0.0000001) or disable it completely (set X,Y to 0,0) - TradingView Replay Mode UI and Pinescript security calls are limited to TFs >= D (D,2D,W,MN...) for free accounts - attempting to plot any TF < D1 in Replay Mode will only result in straight lines, but all TFs will work properly in history and real-time modes. This is not a bug. - Max Bars Back (num_bars) is limited to 5000 for free accounts (10000 for paid), will show error when exceeded. To plot on all available history set to 0 (default) - Slow load/redraw times. This indicator becomes slower, its UI less responsive when: - Pinescript Node.js graphics library is too slow and inefficient at plotting bars/objects in a browser window. Code optimization doesn't help much - the graphics engine is the main reason for general slowness. - the chart has a long history (10000+ bars) in a browser's cache (you have scrolled back a couple of screens in a max zoom mode). - Reload the page/Load a fresh chart and then apply the indicator or - Switch to another Timeframe (old TF history will still remain in cache and that TF will be slow) - in max possible zoom mode around 4500 bars can fit on 1 screen - this also slows down responsiveness. Reset Zoom level - initial load and redraw times after a param change in UI also depend on TF. For example: D1/W1 - 2 sec, H1/H4 - 5-6 sec, M30 - 10 sec, M15/M5 - 4 sec, M1 - 5 sec. M30 usually has the longest history (up to 16000 bars) and W1 - the shortest (1000 bars). - when indicator uses more MAs (plots) and timeframes it will redraw slower. Seems that up to 5 Timeframes is acceptable, but 6+ Timeframes can become very slow. - show_last=last_bars plot limit doesn't affect load/redraw times, so it was removed from MA plot - Max Bars Back (num_bars) default/custom set UI value doesn't seem to affect load/redraw times - In max zoom mode all dynamic levels disappear (they behave like text) 1. based on 3EmaBB, uses plot*, barssince and security functions 2. you can't set certain constants from input due to Pinescript limitations - change the code as needed, recompile and use as a private version 3. Levels = trackprice implementation 4. Show Max Bars Back = show_last implementation 5. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params 6. Smoothing is applied by default for visual aesthetics on MTF. To use exact ma mtf values (lines with stair stepping) - disable it Good Luck! You can explore, modify/reuse the code to build your own indicators.
Pine Script®指标
由RagingRocketBull提供
3
Bollinger Breaks and Cycles Indicator - JDThe BBC indicator shows price in relation to the upper (in red) and lower (in green) Bollinger Bands It highlights breaks in the Bands, where the 0-line represents a price equal to the band. These breaks can either be used as take-profit points or as entry points, depending on trend direction. Entries can be at the beginning of a break (eg. for impulse or continuation moves) or at the end (mostly for expected trend reversals) To find the best setups, the BBC should be accompanied by other indicators (preferably ones that focus on different aspects) The oscilating line in the middle indicates market cycles JD. #NotTradingAdvice #DYOR
Pine Script®指标
由Duyck提供
4
Multi SMA EMA WMA HMA BB (4x3 MAs Bollinger Bands) Pro MTF - RRBMulti SMA EMA WMA HMA 4x3 Moving Averages with Bollinger Bands Pro MTF by RagingRocketBull 2018 Version 1.0 This indicator shows multiple MAs of any type SMA EMA WMA HMA etc with BB and MTF support, can show MAs as dynamically moving levels. There are 4 MA groups + 1 BB group. You can assign any type/timeframe combo to a group, for example: - EMAs 50,100,200 x H1, H4, D1, W1 (4 TFs x 3 MAs x 1 type) - EMAs 8,13,21,55,100,200 x M15, H1 (2 TFs x 6 MAs x 1 type) - D1 EMAs and SMAs 12,26,50,100,200,400 (1 TF x 6 MAs x 2 types) - H1 WMAs 7,77,231; H4 HMAs 50,100,200; D1 EMAs 144,169,233; W1 SMAs 50,100,200 (4 TFs x 3 MAs x 4 types) - +1 extra MA type/timeframe for BB compile time: 25-30 sec full redraw time after parameter change in UI: 3 sec There are several versions: Simple, MTF, Pro MTF, Advanced MTF and Ultimate MTF. This is the Pro MTF version. The Differences are listed below. All versions have BB - Simple: you have 2 groups of MAs that can be assigned any type (5+5) - MTF: +2 custom Timeframes for each group (2x5 MTF) - Pro MTF: +4 custom Timeframes for each group (4x3 MTF), MA levels and show max bars back options - Advanced MTF: +2 extra MAs/group (4x5 MTF), custom Ticker/Symbol, backreferences for type, TF and MA lengths in UI - Ultimate MTF: +individual settings for each MA, custom Ticker/Symbols Features: - 4x3 = 12 MAs of any type including Hull Moving Average (HMA) - 4x MTF groups with step line smoothing - BB +1 extra TF/type for BB MAs - 12 MA levels with adjustable group offsets, indents and shift - show max bars back - you can show/hide both groups of MAs/levels and individual MAs Notes: 1. based on 3EmaBB, uses plot*, barssince and security functions 2. you can't set certain constants from input due to Pinescript limitations - change the code as needed, recompile and use as a private version 3. Levels = trackprice implementation 4. Show Max Bars Back = show_last implementation 5. uses timeframe textbox instead of input resolution to allow for 120 240 and other custom TFs. Also supports TFs in hours: 2H or H2 6. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params 7. Smoothing is applied by default for visual aesthetics on MTF. To use exact ma mtf values (lines with stair stepping) - disable it MTF Notes: - uses simple timeframe textbox instead of input resolution dropdown to allow for 120, 240 and other custom TFs, also supports timeframes in H: 2H, H2 - Groups that are not assigned a Custom TF will use Current Timeframe (0). - MTF will work for any MA type assigned to the group - MTF works both ways: you can display a higher TF MA/BB on a lower TF or a lower TF MA/BB on a higher TF. - MTF MA values are normally aligned at the boundary of their native timeframe. This produces stair stepping when a higher TF MA is viewed on a lower TF. Therefore X Y Point Density/Smoothing is applied by default on MA MTF for visual aesthetics. Set both to 0 to disable and see exact ma mtf values (lines with stair stepping and original mtf alignment). - Smoothing is disabled for BB MTF bands because fill doesn't work with smoothed MAs after duplicate values are replaced with na. - MTF MA Value fluctuation is possible on the current bar due to default security lookahead Smoothing: - X,Y == 0 - X,Y smoothing disabled (stair stepping on high TFs) - X == 0, Y > 0 - X,Y smoothing applied to all TFs - Y == 0, X > 0 - X smoothing applied to all TFs < deltaX_max_tf, Y smoothing disabled - X > 0, Y > 0 - Y smoothing applied to all TFs, then X smoothing applied to all TFs < deltaX_max_tf X Smoothing with Y == 0 - shows only every deltaX-th point starting from the first bar. X Smoothing with Y > 0 - shows only every deltaX-th point starting from the last shown Y point, essentially filling huge gaps remaining after Y Smoothing with points and preserving the curve's general shape X Smoothing on high TFs with already scarce points produces weird curve shapes, it works best only on high density lower TFs Y Smoothing reduces points on all TFs, removes adjacent points with prices within deltaY, while preserving the smaller curve details. A combination of X,Y produces the most accurate smoothing. Higher delta value - larger range, more points removed. Show Max Bars Back: - can't set plot show_last from input -> implemented using a timenow based range check - you can't delete/modify history once plotted, so essentially it just sets a start point for plotting (from num_bars bars back) that works only in realtime mode (not in replay) Levels: You can plot current MA value using plot trackprice=true or by checking Show Price Line in Style. Problem is: - you can only change color (not the dashed line style, width), have both ma + price line (not just the line), and it's full screen wide - you can't set plot trackprice from input => implemented using plotshape/plotchar with fixed text labels serving as levels - there's no other way of creating a dynamic level: hline, plot, offset - nothing else works. - you can't plot a text var - all text strings must be constants, so you can't change the style, width and text labels without recompiling. - from input you can only adjust offset, indent and shift for each level group, and change color - the dot below each level line is the exact MA value. If you want just the line swap plotshape with plotchar, recompile and save as your private version, adjust Y shift. To speed up redraw times: reduce last_bars to ~2000, recompile and use as your own private version Pinescript is a rudimentary language (should be called Painscript instead) that can basically only plot data. You can't do much else. Please see the code for tips and hints. Certain things just can't be done or require shady workarounds and weeks of testing trying to resolve weird node.js compiler errors. Feel free to learn from/reuse/change the code as needed and use as your own private version. See comments in code. Good Luck!
Pine Script®指标
由RagingRocketBull提供
7
Multi SMA EMA WMA HMA BB (5+5 MAs + Bollinger Bands) MTF by RRBMulti SMA EMA WMA HMA BB (5+5 Moving Averages of Any Type with Bollinger Bands) MTF by RagingRocketBull 2018 Version 1.0 This indicator shows multiple MAs of any type (SMA EMA WMA HMA etc) with BB and MTF support There are several versions: Simple, MTF, Pro MTF and Ultimate MTF. This is the MTF version. The Differences are listed below. All versions have BB - Simple: you have 2 groups of MAs that can be assigned any type (5+5) - MTF: +assign 1 custom Timeframe to any group combo (5+5 Custom TF) - Pro MTF: +multiple Timeframes for multiple MA groups (4*3 MTF), horizontal levels and show max bars back options - Ultimate MTF: +individual settings for each MA, multiple Timeframes There are 2 groups of MAs, 3rd group is BB. You can: - show/hide all MAs in a group. Use length 0 to hide a particular MA independently or uncheck in Style. - apply any MA type to all MAs in a particular MA group. For example, you can assign all EMAs the HMA type. Groups are called EMAs and SMAs just for reference. - assign Custom Timeframe to a particular MA/BB group combination or all groups. For example, show daily (D) EMAs+SMAs on H1 Timeframe, or only H4 (240) BB on H1. You can use different types of MAs as dynamic S/R levels to trade of off and MA crosses as signals for possible trend change (golden/death bull/bear crosses). Current Timeframe MAs can be used together with Custom Timeframe MAs on a single chart. Higher TF MAs are more important than lower TF MAs. Most common MA types are: SMA, EMA, WMA, HMA. Most common MA lengths are: 12, 20, 26, 30, 50, 100, 200, 400 etc. MTF Notes: - Script UI uses simple timeframe textbox instead of input resolution dropdown to allow for 240 120 and other custom TFs - Groups that are not assigned a Custom TF will use Current Timeframe (0). - MTF will work for any MA type assigned to the group. BB group always uses SMA type. - MTF works both ways: you can display a higher TF MA/BB on a lower TF or a lower TF MA/BB on a higher TF. - MTF MA values are normally aligned at the boundary of their native timeframe. This produces stair stepping when a higher TF MA is viewed on a lower TF. Therefore Point Density/Smoothing is applied by default on MA MTF for visual aesthetics. Set to 0 to disable and see exact ma mtf values (lines with stair stepping and original mtf alignment). - Smoothing is disabled for BB MTF because fill doesn't work with smoothed MAs after duplicate values are replaced with na. - MTF MA Value fluctuation is possible on the current bar due to default security lookahead Features: - 2 groups of custom 5+5 MAs of any type including Hull Moving Average (HMA) - BB - 1x Custom Timeframe with step line smoothing for 3 groups (MAs + BB) 1. based on 3EmaBB, uses plot, fill, security, change, barstate, stdev and custom hma functions 2. you can't set certain constants from input due to Pinescript limitations - change the code as needed, recompile and use as a private script version 3. you can't have plot* inside ?/if/for/function, and implementing condition forks using 2 sets of plots (na vs non-na) doubles indicator params and styles - confusing 4. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params Feel free to use. Good Luck!
Pine Script®指标
由RagingRocketBull提供
8
Multi SMA EMA WMA HMA BB (5+5 MAs + Bollinger Bands) by RRB Multi SMA EMA WMA HMA BB (5+5 Moving Averages of Any Type with Bollinger Bands) by RagingRocketBull 2018 Version 1.0 This indicator shows multiple MAs of any type (SMA EMA WMA HMA etc) with BB on a chart at the same time with/without MTF support depending on the version. There are several versions (published later): Simple, MTF, Pro MTF and Ultimate MTF. This is the Simple version. The Differences are listed below. All versions have BB - Simple: you have 2 groups of MAs that can be assigned any type (5+5) - MTF: +assign 1 custom Timeframe to any group combo (5+5 Custom TF) - Pro MTF: +multiple Timeframes for multiple MA groups (4*3 MTF), horizontal levels and show max bars back options - Ultimate MTF: +individual settings for each MA, multiple Timeframes You can use different types of MAs as dynamic S/R levels to trade of off and MA crosses as signals for possible trend change (golden/death bull/bear crosses). Most common MA types are: SMA, EMA, WMA, HMA. Most common MA lengths are: 12, 20, 26, 30, 50, 100, 200, 400 etc. Features: - 2 groups of custom 5+5 MAs of any type including Hull Moving Average (HMA) - BB 1. based on 3EmaBB, uses plot, fill, stdev and custom hma functions 2. swma has a fixed length = 4, alma and linreg have additional offset and smoothing params Feel free to use. Good Luck!
Pine Script®指标
由RagingRocketBull提供
12
Advanced Bollinger BandsThis is a more advanced version of the standard Bollinger Bands indicator. It allows you to change the type of the moving average (Simple, Exponential, Weighted, Volume-weighted, Triple EMA or a moving average that uses RSI ). The indicator also allows you to volume weight the indicator (turned on by default). If you want to weight the oscillator against the true range instead of volume this is also possible. By default, this will be done automatically for assets that do not support volume .
Pine Script®指标
由modhelius提供