US Opening 5-Minute Candle HighlighterUS Opening 5-Minute Candle Highlighter — True RVOL (Two-Tier + Label)
What it does (in plain English)
This indicator finds the first 5-minute bar of the US cash session (09:30–09:35 ET) and highlights it when the candle has the specific “strong open” look you want:
Opens near the low of its own range, and
Closes near the high of its own range, and
Has a decisive real body (not a wick-y doji), and
(Optionally) is a green candle, and
Meets a TRUE opening-bar RVOL filter (compares today’s 09:30–09:35 volume only to prior sessions’ 09:30–09:35 volumes).
You get two visual intensities based on opening RVOL:
Tier-1 (≥ threshold 1, default 1.0×) → light green highlight + lime arrow
Tier-2 (≥ threshold 2, default 1.5×) → darker green highlight + green arrow
An RVOL label (e.g., RVOL 1.84x) can be shown above or below the opening bar.
Designed for 5-minute charts. On other timeframes the “opening bar” will be the bar that starts at 09:30 on that timeframe (e.g., 15-minute 09:30–09:45). For best results keep the chart on 5m.
How the pattern is defined
For the opening 5-minute bar, we compute:
Range = high − low
Body = |close − open|
Then we measure where the open and close sit within the bar’s own range on a 0→1 scale:
0 means exactly at the low
1 means exactly at the high
Using two quantiles:
Open ≤ position in range (0–1) (default 0.20)
Example: 0.20 means “open must be in the lowest 20% of the bar’s range.”
Close ≥ position in range (0–1) (default 0.80)
Example: 0.80 means “close must be in the top 20% of the bar’s range.”
This keeps the logic range-normalized so it adapts across different tickers and vol regimes (you’re not using fixed cents or % of price).
Body ≥ fraction of range (0–1) (default 0.55)
Requires the real body to be at least that fraction of the total range.
0.55 = body fills ≥ 55% of the candle.
Purpose: filter out indecisive, wick-heavy bars.
Raise to 0.7–0.8 for only the fattest thrusts; lower to 0.3–0.4 to admit more bars.
Require green candle? (default ON)
If ON, close > open must be true. Turn OFF if you also want to catch strong red opens for shorts.
Minimum range (ticks)
Ignore tiny, illiquid opens: e.g., set to 2–5 ticks to suppress micro bars.
TRUE Opening-Bar RVOL (why it’s “true”)
Most “RVOL” compares against any recent bars, which isn’t fair at the open.
This indicator calculates only against prior opening bars:
At 09:30–09:35 ET, take today’s opening 5-minute volume.
Compare it to the average of the last N sessions’ opening 5-minute volumes.
RVOL = today_open_volume / average_prior_open_volumes.
So:
1.0× = equal to average prior opens.
1.5× = 150% of average prior opens.
2.0× = double the typical opening participation.
A minimum prior samples guard (default 10) ensures you don’t judge with too little history. Until enough samples exist, the RVOL gate won’t pass (you can disable RVOL temporarily if needed).
Visuals & tiers
Light green highlight + lime arrow → price filters pass and RVOL ≥ Tier-1 (default 1.0×)
Dark green highlight + green arrow → price filters pass and RVOL ≥ Tier-2 (default 1.5×)
Optional bar paint in matching green tones for extra visibility.
Optional RVOL label (e.g., RVOL 1.84x) above or below the opening bar.
You can show the label only when the candle qualifies, or on every open.
Inputs (step-by-step)
Price-action filters
Open ≤ position in range (0–1): default 0.20. Smaller = stricter (must open nearer the low).
Close ≥ position in range (0–1): default 0.80. Larger = stricter (must close nearer the high).
Body ≥ fraction of range (0–1): default 0.55. Raise to demand a “fatter” body.
Require green candle?: default ON. Turn OFF to also mark bearish thrusts.
Minimum range (ticks): default 0. Set to 2–5 for liquid mid/large caps.
Time settings
Timezone: default America/New_York. Leave as is for US equities.
Start hour / minute: defaults 09:30. The bar that starts at this time is evaluated.
TRUE Opening-Bar RVOL (two-tier)
Require TRUE opening-bar RVOL?: ON = must pass Tier-1 to highlight; OFF = price filters alone can highlight (still shows Tier-2 when hit).
RVOL lookback (prior opens count): default 20. How many prior openings to average.
Min prior opens required: default 10. Warm-up guard.
Tier-1 RVOL threshold (× avg): default 1.00× (light green).
Tier-2 RVOL threshold (× avg): default 1.50× (dark green).
Display
Also paint candle body?: OFF by default. Turn ON for instant visibility on a chart wall.
Arrow size: tiny/small/normal/large.
Light/Dark opacity: tune highlight strength.
Show RVOL label?: ON/OFF.
Show label only when candle qualifies?: ON by default; OFF to see RVOL every open.
Label position: Above candle or Below candle.
Label size: tiny/small/normal/large.
How to use (quick start)
Apply to a 5-minute chart.
Keep defaults: Open ≤ 0.20, Close ≥ 0.80, Body ≥ 0.55, Require green ON.
Turn RVOL required ON, with Tier-1 = 1.0×, Tier-2 = 1.5×, Lookback = 20, Min prior = 10.
Optional: enable Paint bar and set Arrow size = large for monitor-wall visibility.
Optional: show RVOL label below the bar to keep wicks clean.
Interpretation:
Dark green = A+ opening thrust with strong participation (≥ Tier-2).
Light green = Valid opening thrust with at least average participation (≥ Tier-1).
No highlight = one or more filters failed (quantiles, body, green, range, or RVOL if required).
Alerts
Two alert conditions are included:
Opening 5m Match — Tier-2 RVOL → fires when the opening candle passes price filters and RVOL ≥ Tier-2.
Opening 5m Match — Tier-1 RVOL → fires when the opening candle passes price filters and RVOL ≥ Tier-1 (but < Tier-2).
Recommended alert settings
Condition: choose the script + desired tier.
Options: Once Per Bar Close (you want the confirmed 09:30–09:35 bar).
Set your watchlist to symbols of interest (themes/sectors) and let the alerts pull you to the right charts.
Recommended starting values
Quantiles: Open ≤ 0.20, Close ≥ 0.80
Body fraction: 0.55
Require green: ON
RVOL: Required ON, Tier-1 = 1.0×, Tier-2 = 1.5×, Lookback 20, Min prior 10
Display: Paint bar ON, Arrow large, Label ON, Below candle
Tune tighter for A-plus selectivity:
Open ≤ 0.15, Close ≥ 0.85, Body ≥ 0.65, Tier-2 2.0×.
Notes, tips & limitations
5-minute timeframe is the intended use. On higher TFs, the 09:30 bar spans more than 5 minutes; geometry may not reflect the first 5 minutes alone.
RTH only: The opening detection looks at the clock (09:30 ET). Pre-market bars are ignored for the signal and for RVOL history.
Warm-up period: Until you have Min prior opens required samples, the RVOL gate won’t pass. You can temporarily toggle RVOL off.
DST & timezone: Leave timezone on America/New_York for US equities. If you trade non-US exchanges, set the appropriate TZ and opening time.
Illiquid tickers: Use Minimum range (ticks) and require RVOL to reduce noise.
No strategy orders: This is a visual/alert tool. Combine with your execution and risk plan.
Why this is useful on multi-monitor setups
Instant pattern recognition: the two-shade green makes A vs A+ opens pop at a glance.
Adaptive thresholds: quantiles & body are within-bar, so it works across $5 and $500 names.
Fair volume test: TRUE opening RVOL avoids comparing to pre-market or midday bars.
Optional labels: glanceable RVOL x-value helps triage the strongest themes quickly.
在脚本中搜索"黄金近20年走势"
PnL PortfolioThis script allows you to input the details for up to 20 active positions across various trading pairs or markets. Stop manually calculating your trades—get instant, real-time feedback on your performance.
Key Features:
Multi-Pair Tracking: Monitor up to 20 unique symbols simultaneously.
Required Inputs: Easily define the Symbol, Entry Price, and Position Quantity (size) for each trade in the indicator settings.
Real-Time PnL: Instantly calculates and displays two critical metrics based on the current market price:
% PnL (Percentage Profit/Loss)
Absolute Profit/Loss (in currency)
Color-Coded Feedback: The PnL columns are color-coded (green/teal for profit, red/maroon for loss) for immediate visual confirmation of your trade health.
Customizable Layout: Choose where the dashboard table appears on your chart (top-left, top-right, bottom-left, or bottom-right) to keep your trading view clean.
This is an essential overlay for any trader managing multiple active positions and needing a consolidated, easy-to-read overview.
Overnight Z/VolRatio SignalThis indicator highlights overnight setups where both volatility expansion and prior-day range deviation suggest directional opportunity at the RTH open.
It calculates:
• Overnight Z-Score (Z_long): how far the overnight session’s range tilts from the 20-day overnight mean, standardized by its standard deviation.
• VolRatio: ratio of the current RTH session volume to the 20-day average, a proxy for participation and conviction.
Signal Logic (LONG bias)
A long-bias condition triggers when:
• Z_long ≥ 0.40 (overnight tilt strongly positive)
• VolRatio ≥ 1.30 (above-average RTH volume)
• Optional filters: R1/R4 region alignment, YDH/YDL proximity, and other context flags.
Visuals mark qualifying days with colored labels and session highlights.
It is intended as a context signal — not an auto-trading system — for SPY/SPX/ES or correlated large-cap indices.
Usage Notes
• Works best when applied to daily or intraday 5m chart with extended hours enabled.
• Typical exit: ~150 minutes after 09:30 ET.
• Fridays are optionally excluded to avoid expiration-related distortions.
MA Disparity (乖離率％)このインジケータは、現在の終値と移動平均線（SMAまたはEMA）との**乖離率（かいりりつ）**を％で表示します。
「価格が移動平均線からどれだけ離れているか」を視覚的に把握することで、**過熱感（買われすぎ／売られすぎ）**を判断できます。
設定で期間（例：20日、25日など）を自由に変更可能
SMA／EMAの選択が可能
0%ラインを基準として、プラス側は上方乖離、マイナス側は下方乖離を示します
トレンドの勢い確認、押し目・戻り目の判断にも活用できます
📊 例：
+10%以上 → 短期的な過熱感
-10%以下 → 売られすぎの可能性
---
This indicator displays the disparity ratio (price deviation) between the current close and a moving average (SMA or EMA), expressed in percentage.
It helps visualize how far the price has moved away from its average — a useful signal for identifying overbought or oversold conditions.
Adjustable period (e.g., 20, 25, 50, etc.)
Selectable MA type (SMA or EMA)
0% baseline: positive values = above MA, negative = below MA
Great for spotting trend strength, pullbacks, and reversals
📈 Example:
+10% → potential overbought zone
-10% → potential oversold zone
---
#Kairi #Disparity #MovingAverage #Volume #SMA #EMA #Overbought #Oversold #Japan
TGFA Flexible Alerts Multi-MA CrossoversTGFA Flexible Alerts, Multi-MA Crossovers
Description
Flexible MA crossovers with BUY/SELL alerts, customizable candle colors, and an info box for ATR/volatility insights. Supports EMA/SMA/HMA/VWAP on any chart.
Overview
TGFA Flexible Alerts is a versatile Pine Script indicator for traders seeking customizable moving average (MA) crossovers, visual signals, and quick-reference metrics. It overlays crossover lines (e.g., fast EMA over slow SMA), generates BUY/SELL labels and alerts, colors candles based on themes, and includes an optional info box with ATR bands, support/resistance, and trend projections. Built for any symbol and timeframe (optimized for 1H intraday), it auto-detects Heikin Ashi charts and handles mixed MA types like responsive HMA with lagging EMAs. All logic uses built-in TA functions for reliability—no repainting on confirmed bars.
Key Features
MA Crossover Engine: Configurable lines (EMA, SMA, HMA, VWAP) with dynamic colors (HMA tints green/red based on slope). Enable/disable via inputs.
Invert Signals Toggle: Flips BUY/SELL logic for mixed MA setups (e.g., HMA as fast line over EMA).
Reasoning: Traditional crossovers assume a fast line (low lag) crossing above a slow line (high lag) for buys. HMA's hull design makes it ultra-responsive, so it may "lead" too aggressively—causing premature signals. Inverting aligns it with user intuition (e.g., HMA dipping below then recovering signals strength), reducing false positives in trending markets. Test on your pairs!
Visual Alerts: BUY/SELL labels at crossover price (with optional price display and offset adjustment).
Single MA Overlays: Independent plots for EMA/SMA/HMA/VWAP (length 0 to hide).
Info Box: Real-time table with current price, ±1/2 ATR bands, median price (over lookback), trend (SMA50 slope), volatility % (ATR normalized), support/resistance (recent highs/lows), and reversal projections (tied to SMA50 pivot for up/down bias).
Candle Coloring: 20+ themes (dark/light canvases) for bull/bear/reversal/low-volume bars—e.g., Emerald Blaze greens uptrends, dims on low vol. Toggle off for no changes.
Chart Source Flexibility: Auto-switches to Heikin Ashi if detected; manual override for Regular/HA.
Alerts fire on crossovers/crossunders (custom messages with ticker/interval). Open-source for forking.
How to Use
Add to Chart: Search in TradingView's public library, apply to any symbol (e.g., stocks, forex). Best on 1H for intraday, but works on daily/weekly too.
Setup Crossovers: Choose Line 1/2 types/lengths (e.g., HMA 9 over SMA 20). Enable "Invert Signals" if using HMA—prevents lag mismatches in volatile assets.
Alerts & Labels: Toggle labels for visuals; set TradingView alerts on "Buy"/"Sell" conditions. Use offset for crowded charts.
Info Box Insights: Enable for quick scans—e.g., enter long near support if trend is bullish and price > median. Adjust ATR length (default 14) for sensitivity.
Candle Themes: Pick a scheme (e.g., Neon Pulse for dark mode); it overrides bar colors without altering data.
Customization Tip: For HMA-heavy setups, invert + short lengths (5-9) catch turns early; pair with volume filter in alerts.
Limitations & Disclaimers - Designed for overlay on price charts; may overlap in tight ranges—adjust transparency via styles.
HMA can repaint intra-bar; signals confirm on close. Not back tested for all assets—validate with strategy tester.
Info box projections use SMA(50) as a trend pivot (same for up/down as reference); customize via code for advanced calcs. Candle colors are cosmetic only.
This is an analysis tool, not advice. Trading involves risk; combine with fundamentals/news. Past performance isn't indicative of future results. No liability for losses.
I'm still a newbie, so feedback encouraged!
Thank you!!
ThisGirl
Luxy Flexible Moving AveragesUltra-lightweight moving average suite supporting six calculation methods (EMA, SMA, WMA, VWMA, RMA, HMA).
Overview
Luxy Flexible Moving Averages is a performance-optimized indicator designed for traders who need clean, reliable moving average lines without the overhead of complex calculations or unnecessary features. This indicator prioritizes speed and visual clarity, making it ideal for traders who run multiple indicators simultaneously or work on lower-powered devices.
Unlike traditional moving average indicators that calculate all lines regardless of whether they are enabled, Luxy only processes the moving averages you actually need, resulting in near-instantaneous chart loading times.
What Makes This Different
The primary design philosophy behind Luxy Flexible Moving Averages is efficiency without compromise. The indicator includes four independently configurable moving average lines, each supporting six different calculation methods. Every calculation is conditionally executed, meaning that disabled lines consume zero processing power. This approach delivers exceptional performance even when paired with resource-intensive indicators like volume profiles, market structure tools, or custom scanners.
Features
The indicator provides four distinct moving average lines, each fully customizable:
Fast MA is typically used for short-term momentum and quick directional changes. Traders often configure this as an EMA with lengths between 5 and 20 bars, depending on their trading timeframe.
Medium MA serves as a middle-ground reference, often used to identify the intermediate trend or as a dynamic support and resistance level. This line commonly uses EMA or SMA calculations with lengths between 10 and 50bars.
Medium-Long MA acts as a visual bridge between short-term noise and long-term structure. Many traders disable this line entirely if they prefer a cleaner chart, but it can be useful for identifying larger trend phases. Typical configurations use SMA or RMA with lengths between 50 and one 150 bars.
Long MA represents the dominant trend or bias. This is often configured as a 200 period SMA, which is a widely-watched level across most markets and timeframes. Alternatively, traders may use RMA for a smoother visual appearance.
Each line supports six calculation methods:
EMA (Exponential Moving Average) applies exponentially decreasing weights to older prices, making it highly responsive to recent price action. This is the preferred method for momentum-based strategies and short-term trading.
SMA (Simple Moving Average ) treats all prices equally within the lookback period, resulting in a smoother line that is less reactive to sudden price spikes. This is commonly used for identifying long-term trends.
WMA (Weighted Moving Average) applies linearly decreasing weights, offering a middle ground between EMA and SMA. It responds faster than SMA but with less sensitivity than EMA.
VWMA (Volume-Weighted Moving Average) incorporates volume data into the calculation, giving more weight to bars with higher trading activity. This method is particularly useful in liquid markets where volume represents genuine participation.
RMA (Relative Moving Average, also known as Wilder's Smoothing) is a variant of EMA with a slower response curve. It is commonly used in oscillators like RSI and ADX, and provides very smooth trend lines on charts.
HMA (Hull Moving Average) is designed to reduce lag while maintaining smoothness. It is the most responsive option available in this indicator but can produce more false signals during choppy or sideways markets.
How It Works
The indicator operates on a conditional calculation model. When you load the indicator, it checks which moving average lines are enabled via the input settings. Only the enabled lines are calculated on each bar, and disabled lines are assigned a not-applicable value, preventing any processing overhead.
Each moving average is calculated using native TradingView functions, ensuring maximum compatibility and reliability across all asset classes and timeframes. The indicator does not use any security calls, loops, or external data requests, which are common sources of performance degradation in more complex indicators.
Recommended Configurations
The optimal moving average configuration depends on your trading style and timeframe. Below are general guidelines based on common trading approaches.
Scalping (1 minute to 5 minute charts)
Scalpers require fast-reacting moving averages that can identify micro-trends and momentum shifts within seconds. The recommended configuration prioritizes EMA or HMA for all lines, with very short lengths to capture quick moves.
For the Fast MA, use EMA with a length between 5 and 8. This line should react almost immediately to price changes and helps confirm entry timing during breakouts or pullbacks.
For the Medium MA , use EMA with a length between 10 and 15. This serves as your primary directional filter. When price is above this line, you look for long opportunities. When below, you look for shorts.
The Medium-Long MA is often disabled in scalping setups to reduce visual noise. If used, configure it as SMA between 40 and 80 to provide context on the broader 5-minute or 15-minute trend.
The Long MA can be set to SMA with a length between 100 and 150, or simply disabled. On very short timeframes, this line often provides more historical context than real-time utility.
Day Trading (5 minute to 1 hour charts)
Day traders benefit from a balanced approach that filters out noise while remaining responsive to intraday volatility. A common configuration combines EMA for short-term lines and SMA for long-term structure.
For the Fast MA , use EMA with a length between 8 and 12. This captures momentum without overreacting to every minor price swing.
For the Medium MA , use EMA with a length between 12 and 21. This is often used as a dynamic support or resistance level during trending sessions.
For the Medium-Long MA , configure SMA or RMA between 60 and one 120. This line helps identify whether the intraday trend aligns with the broader daily bias.
The Long MA is typically set to SMA with a length of 200. This is a critical level that many institutional traders watch, and price reactions around this line are often significant.
Swing Trading (4 hour to daily charts)
Swing traders operate on longer timeframes and need moving averages that filter out daily noise while highlighting multi-day or multi-week trends. SMA and RMA are commonly preferred for their smoothness, though EMA can be used for faster momentum entries.
For the Fast MA , use EMA or SMA with a length between 10 and 20. This line helps time entries during pullbacks within the larger trend.
For the Medium MA , use EMA or SMA with a length between 20 and 34. This often serves as a key decision point for whether a pullback is likely to reverse or continue.
For the Medium-Long MA , configure SMA between 100 and 180. This provides visual context on the broader weekly trend and can act as a significant support or resistance zone.
The Long MA should be SMA with a length of 200 or higher. On daily charts, the two-hundred-day moving average is one of the most widely-referenced indicators in global markets, and price behavior around this level is often predictable.
Using Moving Averages for Trend Identification
Moving averages are primarily used to determine trend direction and strength. The relationship between price and the moving average lines provides insight into market structure.
When price is trading above a moving average, the trend is generally considered bullish on that timeframe. When price is below, the trend is bearish. The steeper the slope of the moving average, the stronger the trend. A flat moving average indicates consolidation or a potential trend change.
Crossovers between moving averages are commonly used as trend confirmation signals. When a faster moving average crosses above a slower moving average, this suggests increasing bullish momentum. When the faster line crosses below, it suggests increasing bearish momentum. However, crossovers should not be used in isolation, as they can produce false signals during sideways markets.
Many traders use moving averages as dynamic support and resistance levels. During uptrends, price often pulls back to a key moving average before resuming higher. During downtrends, price often rallies to a moving average before resuming lower. These levels can be used to plan entries, exits, or stop-loss placement.
Trend MACD [JopAlgo]Trend MACD — momentum made obvious (4-state histogram)
What it does (one line):
A clean MACD histogram using EMA(fast) − EMA(slow) with a signal line. The columns change color to show trend side and momentum change at a glance.
Green = above 0 and rising → positive trend, momentum building
White (upside) = above 0 but fading → still positive, momentum cooling
White (downside) = below 0 but improving → still negative, momentum recovering
Red = below 0 and falling → negative trend, momentum building down
Zero line = the bull/bear divider. Distance from zero = thrust. Color change = momentum shift.
What you’ll see
Dashed zero line for the trend divider
Column histogram with the 4-state color logic above
No clutter—just momentum and regime, clean
Read it in 3 seconds: Which side of 0? Are bars getting bigger or smaller? Did the color flip?
How to use it (simple playbook)
Direction filter
Look for longs while histogram is ≥ 0.
Look for shorts while histogram is ≤ 0.
Timing
Green sequence (above 0, growing): join pullbacks at real levels.
White above 0: positive but cooling—buy pullbacks only at levels, don’t chase.
White below 0: negative but improving—prepare for reclaim trades at levels.
Red sequence: trend down—sell pops at levels.
Location first (always)
Use Volume Profile v3.2 (VAH/VAL/POC/LVNs) and Anchored VWAP (session/weekly/event).
No level, no trade.
Quality check (optional, strong)
CVDv1 : execute when Alignment OK and no Absorption against your side.
RVOL (if you track it): prefer breakouts with RVOL above cutoff.
Entries, exits, risk (keep it tight)
Continuation long: price retests VAL / AVWAP / MA cluster in an up regime (≥ 0). Histogram stays ≥ 0 and turns green again → enter.
Stop: under structure. Targets: POC/HVNs or next swing.
Break + retest: breakout through a level while histogram flips from white→green above 0 (or white→red below 0 for shorts). Enter on the retest that holds.
Trim / avoid: when bars shrink toward 0 (white) into your target / HVN—momentum is cooling. Don’t chase fresh highs with white bars.
Settings that matter (how to tune)
Fast Length (default 25)
Shorter = quicker turns (more noise). Longer = steadier, slower.
Slow Length (default 200)
Big backbone. For intraday you might use 21/55 or 12/26; for swing the default 25/200 or 20/100 is solid.
Signal Smoothing (default 9)
Higher = smoother, fewer flips. Lower = more reactive.
Source
close is fine; if you use hlc3, expect slightly smoother behavior.
Suggested presets
Scalp (1–5m): 12 / 26 / 9
Intraday (15m–1H): 21 / 55 / 9
Swing (2H–4H): 25 / 100 or 25 / 200 / 9
Daily backdrop: 20 / 100 or 50 / 200 / 9 (execute on lower TF)
Pattern cheat sheet
Green staircase above 0 → trend leg; buy pullbacks to VP/AVWAP.
White above 0 → positive but tiring; avoid chasing; wait for retest.
Flip through 0 with expansion → regime change; use the first retest at a level.
Red staircase below 0 → trend down; sell pops at VP edges.
Diverging price vs shrinking bars → momentum thinning; tighten risk.
Best combos (kept simple)
Volume Profile v3.2: entries at VAH/VAL/LVNs, targets at POC/HVNs.
Anchored VWAP: reclaim/reject with matching histogram side is high-quality timing.
CVDv1: take MACD-aligned setups with flow (ALIGN OK, no Absorption).
RVOL: confirmation that the push has participation.
Common mistakes this helps you avoid
Longs with red momentum or shorts with green momentum.
Chasing new highs on white (cooling) bars.
Trading mid-range when histogram keeps whipsawing around 0 (do less; wait for level).
Disclaimer:
This indicator is an educational tool, not financial advice. Markets are risky; you can lose money. Always test your settings, trade at defined levels, and use risk management. Data/feeds vary across venues; outcomes may differ. No guarantees or warranties are provided.
Rate of Change Indicator [JopAlgo] (ROCI)Rate of Change Indicator (ROCI) — see impulse early, skip the dead moves
What it is (one line):
ROCI tells you how fast price changed vs N bars ago , in percent. It’s a clean momentum gauge:
Above 0 → price is higher than N bars ago (bullish momentum).
Below 0 → price is lower than N bars ago (bearish momentum).
Further from 0 → stronger impulse.
The default +5 / −5 bands highlight strong thrust . Zero-line crosses flag momentum shifts.
What you’ll see
Blue line = ROCI.
Orange dotted line = 0 (bull/bear divider).
White dotted lines = ±Strong Momentum levels (default ±5).
Green/red panel tint when ROCI lives above +5 or below −5.
Read in 3 seconds: Which side of 0? How far? Growing or fading vs last bar?
How to use it (simple playbook)
Direction filter
Trade longs only while ROCI > 0.
Trade shorts only while ROCI < 0.
Timing
Breakouts: prefer breaks where ROCI pushes through +5/−5 and holds on the first retest.
Pullbacks in trend: in an uptrend, let ROCI dip toward 0 and then turn back up → entry. (Mirror for downtrends.)
Do less in chop
If ROCI whips around near 0, you’re in balance. Only act at objective levels.
Rule of thumb: Zero cross = heads-up. ±5 hold = go-with.
Entries, exits, risk (use this, keep it tight)
Continuation entry (trend):
Bias up at your level (e.g., VAL/AVWAP). ROCI stays > 0 and turns up from a shallow dip → enter long.
Stop: under structure/level. Targets: POC/HVNs or next swing.
Breakout entry:
Break through a level with ROCI > +5 (or < −5 for shorts). Enter on the retest that holds while ROCI remains outside the band.
Invalidation: quick fall back inside the band and under 0 → stand down.
Exit/trim:
On longs, repeated lower ROCI peaks into your target (momentum fading) → take profits or tighten.
Timeframe guide
1–5m (scalps) : ROC Period 10–20, Strong 6–10. Many signals; require level + confirmation.
15m–1H (intraday): ROC Period 14–34, Strong 4–7. Sweet spot.
2H–4H (swing): ROC Period 20–50, Strong 3–6. Cleaner legs, fewer flips.
1D+ (position): ROC Period 50–100, Strong 2–5. Use for backdrop; trigger on lower TF.
Settings that actually matter (and how to tune)
ROC Period (default 32) : lookback for comparison.
Shorter = earlier signals, more noise.
Longer = steadier bias, slower turns.
Strong Momentum Threshold (default 5) : where you say “this is real thrust.”
Pick it by history: scroll back, mark thrusts that ran, and note their typical ROCI. Set the band slightly inside that value so you see the start of good moves.
Pattern cheatsheet
Impulse leg : ROCI above 0 making higher peaks → trend leg in progress.
Healthy pullback : ROCI dips toward 0 but doesn’t flip negative, then turns up → add/entry with trend.
Weak breakout / likely fail: Price pokes level but ROCI stays near 0 or rolls over quickly.
Divergence (lightweight): Price makes a higher high, ROCI peaks lower → momentum thinning; trail tight into HVNs.
Best combos (kept simple)
Volume Profile v3.2 : Use VAH/VAL/LVNs/POC for where. ROCI tells you if the break has juice.
Anchored VWAP : Reclaim/reject AVWAP with ROCI on the correct side of 0 for higher quality.
CVDv1 :
Yes: ROCI thrust + CVD Alignment OK + no Absorption → higher odds the move sticks.
No: ROCI thrust but Absorption red → don’t chase; wait for the fail/reclaim.
(Optional add: RVOL—high participation + strong ROCI is the A+ combo for breaks.)
Common mistakes this avoids
Buying a breakout while ROCI sits near 0 (no impulse).
Shorting a strong trend when ROCI is firmly > 0 (or > +5).
Treating every zero cross as a trade (it’s a heads-up, not an entry by itself).
Quick defaults to start
ROC Period: 32
Strong Threshold: 5
Process: Level → ROCI side/strength → (optionally) CVD quality → Execute with structure-based risk
Screenshots tip: show a level break where ROCI pushes through +5 and a pullback where ROCI turns up from ~0.
Mini-disclaimer
Educational tool, not financial advice. Test first, size sensibly, and always anchor decisions to levels, flow, and risk.
Multiple Moving Averages [JopAlgo]Multiple Moving Averages — read trend, timing, and strength at a glance
What it does:
Mark up to 5 moving averages (you pick type + length + color). Watch how they stack, slope, braid, and fan out to judge trend direction, pullback timing, and breakout quality on any timeframe.
Read it in 5 seconds
Stack order:
Bullish: fast MAs on top of slow MAs.
Bearish: fast MAs below slow MAs.
Slope: up = trend has a tailwind; down = headwind.
Spacing: wide = strong trend; tight/braided = balance/chop.
If you remember only one rule: trade with the stack and slope, enter at levels.
High-probability plays (simple and repeatable)
Trend pullback (with level)
Stack is bullish, slopes up.
Price pulls back to the MA cluster (or AVWAP/VAL), holds, fast MAs curl back up.
Long. Stop: below structure/slowest MA. Target: POC/HVNs or next swing.
(Mirror for shorts in a bearish stack.)
Reclaim + recurl
After a down phase, price closes above fast MAs (MA1–MA2), they turn up, and you’re at a real level (AVWAP/VA edge).
Take the first higher-low with the stack starting to flip.
Squeeze → expansion
MAs braid tight = energy building.
Break at a level, then the lines fan out in your direction.
Enter on the first retest that holds.
Skip trades when the lines are braided mid-range and you’re not at a level.
Timeframe guide (what usually works)
1–5m (scalps): EMA heavy (e.g., 5/9/21/34/55). Expect more signals; filter with levels + CVD.
15m–1H (intraday): 9/21/34/50/200 (mix EMA for fast, SMA for slow).
2H–4H (swing): 10/20/50/100/200 or 8/21/34/55/89 (smoother read).
1D+ (position): 20/50/100/200 (bias) and enter on lower TF.
Tip: Don’t set all five to the same length—stagger them so the stack tells a story.
Settings that matter (and what they mean)
MA types (pick the feel you like):
EMA – fastest response (great for timing).
SMA – smoother backbone (great for bias).
WMA / LWMA – responsive but less twitchy than EMA.
VWMA – weights price by volume (good on assets with uneven volume).
SMMA – very smooth (reduces whips).
DEMA – extra fast (can be noisy).
HEMA – in this script behaves like a double-EMA style response (fast).
RVIMA – not implemented here (will plot nothing if chosen).
Length:
Shorter = earlier turns, more noise.
Longer = slower, cleaner bias.
Keep a sensible spread (e.g., 1:2:3… or Fib-style 9/21/34/55/89).
Colors:
Use consistent colors (e.g., warm = fast, cool = slow) so you can read the stack instantly.
Best combos with other tools
Volume Profile v3.2: take signals at VAH/VAL/LVNs; use POC/HVNs for targets.
Anchored VWAP: reclaims/rejections + MA recurl = clean timing.
CVDv1: execute with flow (Alignment OK, strong Imbalance, no Absorption against you).
Common mistakes this prevents
Shorting into a bullish stack (or buying into a bearish one).
Chasing far from the fast MAs; better to wait for a pullback.
Trading every wiggle in chop—braids tell you to do less.
Quick FAQs
Cluttered chart? Hide 1–2 lines (keep fast, middle, slow) or thin the linewidth.
Which one is “right”? None. Pick a set that fits your tempo and stick to it.
RVIMA option? Not implemented in this version—choose another type.
Starter presets (copy these, then adjust)
Intraday: MA1 EMA9, MA2 EMA21, MA3 SMA34, MA4 SMA50, MA5 SMA200
Swing: MA1 EMA10, MA2 SMA20, MA3 SMA50, MA4 SMA100, MA5 SMA200
Scalp: MA1 EMA5, MA2 EMA9, MA3 EMA21, MA4 EMA34, MA5 EMA55
Mini-disclaimer
Educational tool, not financial advice. Always anchor trades to levels, flow, and risk—this indicator keeps your bias and timing honest; the plan is still yours.
Multi MA Cross [JopAlgo]Multi MA Cross — simple, flexible trend + timing
What it does:
Plots two moving averages (you pick the types and lengths) and marks their crossovers. Use it to read trend direction and time pullbacks/breakouts. Works on any timeframe.
What you’ll see
Short MA (orange)
Long MA (lime)
Cross mark (aqua ✚) when they cross
Green/lime above orange = bullish bias (short MA above long).
Orange above lime = bearish bias.
How to use it (simple playbook)
Trade with the bias
Longs only when short MA > long MA.
Shorts only when short MA < long MA.
Enter at a real level
Use Volume Profile v3.2 (VAH/VAL/POC/LVNs) or Anchored VWAP .
Crosses at or just after a level hold are higher quality.
Quality check (optional, strong)
CVDv1 : take trades when Alignment = OK, Imbalance strong, Absorption ≠ red.
Manage risk
Stop goes beyond the level/structure, not on an MA wiggle.
Trim into POC/HVNs or next structure.
Good entries you’ll recognize
Pullback-to-long MA (trend):
Bias up, price pulls to long MA (or AVWAP/VAL), short MA curls back up → enter long.
Reclaim + cross:
Price reclaims AVWAP/VA edge, then short MA crosses over long → confirmation to join.
Squeeze → break:
MAs converge (tight), then expand after a level break. Enter on retest that holds.
Skip crosses in the middle of nowhere. Cross + location + flow beats cross alone.
Timeframe guidance
1–5m (scalps): EMA/EMA or EMA/WMA. Expect more crosses. Use VP/AVWAP and CVD filters.
15m–1H (intraday): EMA(9) vs SMA(21) is a solid default.
2H–4H (swing): SMA(20–34) vs SMA(50) or EMA(21) vs EMA(55).
1D+ (position): SMA(50) vs SMA(200) for broad bias; entries on lower TF.
Settings that matter (and what they mean)
Short/Long MA Type:
EMA = fast, good for timing.
SMA = smooth, good for bias.
WMA/LWMA = in-between (responsive).
VWMA = weights by volume.
SMMA = very smooth (reduces whips).
HEMA/DEMA = extra responsive.
VWAP = daily session VWAP (anchor), ignores length in practice.
Short/Long Length:
Short = timing sensitivity.
Long = trend backbone.
Keep a ratio ~ 1:2 to 1:3 (e.g., 9/21, 10/30, 20/50).
Note on VWAP option: The script fetches a daily VWAP anchor. It acts like a fair-value line, not a rolling MA. Your Length won’t affect VWAP.
Filters that boost win rate
Slope check: Only take longs when both MAs slope up; shorts when both slope down.
Distance check: Don’t chase if price is far from the short MA; wait for a pullback.
HTF agreement: On 15m, glance at 1H/4H bias; on 4H, glance at 1D. Trade with the higher-TF wind.
Combos that work
Volume Profile v3.2: Use VAH/VAL/POC/LVNs for entries/targets. Cross at those references is meaningful.
Anchored VWAP: Reclaims/rejections first, MA cross second = cleaner timing.
CVDv1: Only act when flow agrees (ALIGN OK, no Absorption against you).
Common mistakes this avoids
Shorting into an up-bias (or vice versa).
Chasing a cross far from value (wait for the pullback).
Trading every cross in chop (use levels + CVD to filter).
Defaults to start with
Short MA: EMA 9
Long MA: SMA 21
Timeframes: 15m–4H
Process: Bias → Level → Cross/Retest → CVD check → Execute
Quick disclaimer
Educational tool, not financial advice. Test first, size sensibly, and always anchor your trades to levels, flow, and risk.
FRAMA Channel [JopAlgo]FRAMA Channel — let the market tell you how fast to move
Most moving averages make you pick a speed and hope it fits every regime. FRAMA (Fractal Adaptive Moving Average, popularized by John Ehlers) does the opposite: it adapts its smoothing to market structure. When price action is “trendy” (more directional, less jagged), FRAMA speeds up; when it’s choppy (more fractal noise), FRAMA slows down and filters the rubble.
FRAMA Channel wraps that adaptive core with a volatility channel and clean color logic so you can read trend, mean-reversion windows, and breakouts in one glance—on any timeframe.
What you’re seeing (plain-English tour)
FRAMA midline (Filt): the adaptive average. It’s computed from a fractal dimension of price over Length (N).
Trendy tape → lower fractal dimension → FRAMA tracks price tighter.
Choppy tape → higher fractal dimension → FRAMA smooths harder.
Channel bands (Filt ± distance × volatility): the “breathing room.” Volatility here is a long lookback average of (high − low).
Upper band = potential resistance in down/neutral or trend-walk path in uptrends.
Lower band = mirror logic for shorts.
Color logic (simple and strict):
Green when price breaks above the upper band → bullish regime (momentum present).
Red when price breaks below the lower band → bearish regime.
White when price crosses the FRAMA midline → neutral/reset.
Optional candle coloring: toggle Color Candles to tint the chart itself with the regime color—handy for quick reads.
(When you add screenshots: image #1 should label FRAMA, bands, and the three colors in a small trend + pullback. Image #2 can show a “squeeze → expansion” sequence: channel tightens, then price breaks and walks the band.)
How it’s built (without the jargon)
The script measures three ranges over your Length (N): two half-windows and the full window.
It converts those into a fractal dimension (Dimen). That number says “how zig-zaggy” price is right now.
It turns Dimen into an alpha (smoothing factor): alpha = exp(−4.6 × (Dimen − 1)), clamped so it never explodes or flatlines.
It updates FRAMA each bar using that alpha.
It builds bands using a long average of (high − low) multiplied by your Bands Distance setting.
It changes color only on confirmed bar events:
hlc3 crosses above the upper band → green
hlc3 crosses below the lower band → red
close crosses the midline → white
Result: a channel that tightens in balance, widens in trend, and doesn’t flicker on partial bars.
How to use FRAMA Channel on any timeframe
Same framework everywhere. Your job is to choose where to act (objective levels) and let FRAMA tell you trend/mean-reversion context and breakout quality.
Scalping (1–5m)
Pullback-to-midline (trend): When color is green, buy pullbacks that hold at/above the midline; when red, short pullbacks that fail at/below it.
Invalidation: a white flip (midline cross back) right after entry → tighten or bail.
Squeeze → break: A narrowing channel often precedes a move. Only chase the break if color flips to green/red and the first pullback holds the band/midline.
Intraday (15m–1H)
Trend rides: In green/red, expect price to walk the outer band. Entries on midline kisses are cleaner than chasing the band itself.
Balance fades: In white (neutral) with a tight channel, fade outer band → midline—but only at a real level (see “Pairing” below).
Swing (2H–4H)
Regime compass: Color changes that stick (several bars) often mark swing regime shifts. Combine with Weekly/Event AVWAP and composite VP levels.
Add/Trim: In an uptrend, add on midline holds; trim as the channel widens and price spikes beyond the upper band into HVNs.
Position (1D–1W)
Context first: A persistent green weekly channel is constructive; a persistent red is distributive.
Patience: Wait for midline retests at higher-TF levels rather than chasing outer-band prints.
Entries, exits, and risk (keep it simple)
Continuation entry (trend):
Color already green/red.
Price pulls back to FRAMA midline (or shallowly toward it) and holds.
Take the trend side.
Stop: beyond the opposite side of the midline or behind local structure.
Targets: your Volume Profile HVN/POC or prior swing, not the band alone.
Breakout entry:
Channel had tightened; price breaks a key level.
Color flips green/red and the first retest holds.
Enter with the break.
Avoid: breaks that flip color but immediately white-flip on the next bar.
Mean-reversion entry (balance):
Color white and channel tight.
At a VP edge (VAL/VAH), fade outer band → midline.
Stop: just outside the band; Exit: at midline/POC.
Settings that actually matter (and how to tune them)
Length (N) — default 26
Controls how FRAMA “reads” structure.
Shorter (14–20): faster, more responsive (good for scalps/intraday), more flips in chop.
Longer (30–40): steadier (good for swings/position), slower to acknowledge new trends.
Bands Distance — default 1.5
Scales the channel width.
If you’re constantly tagging bands, increase slightly (1.7–2.0).
If nothing ever reaches the band, decrease (1.2–1.4) to make context meaningful.
Color Candles — on/off
Great for quick regime reads. If your chart feels too busy, leave bands colored and turn candle coloring off.
Warm-up note: FRAMA references N bars. Right after switching timeframes or symbols, give it N–2N bars to settle before you judge the current state.
(You may see an input named “Signals Data” in this version; it’s reserved for future enhancements.)
What to look for (pattern cheat sheet)
Walk-the-band: After a green/red flip, price hugs the outer band while the midline slopes. Ride pullbacks to the midline, don’t fade the band.
Squeeze → Expansion: Channel pinches, then color flips and bands widen—that’s the move. The first midline retest is your best entry.
False break tell: Brief color flip to green/red that immediately reverts to white on the next bar—skip chasing; plan for a reclaim.
Midline reclaims: In chop, repeated white↔green/white↔red flips say “mean reversion”; stay tactical and target the midline/POC.
Pairing FRAMA Channel with other tools
Cumulative Volume Delta v1 (CVDv1):
FRAMA tells you trend/mean-reversion context; CVDv1 tells you flow quality.
Breakout quality: FRAMA flips green and CVDv1 ALIGN = OK, Imbalance strong, Absorption ≠ red → higher odds the break sticks.
If Absorption is red on a FRAMA green flip, do not chase—wait for retest or look for a fail/reclaim.
Volume Profile v3.2:
Use VAH/VAL/LVNs/POC for where.
Green + VAL retest → rotate toward POC/HVN.
Red + VAH rejection → rotate back to POC.
LVN + green flip → expect fast travel toward the next HVN; set targets there.
Anchored VWAP :
Treat AVWAP as fair-value rails.
AVWAP reclaim + FRAMA green → excellent trend-resume entry.
AVWAP rejection + FRAMA red → high-quality short; use midline as your risk guide.
Common pitfalls this helps you avoid
Chasing every poke: FRAMA’s white → green/red state change helps you wait for confirmation (or a retest) instead of reacting to the first wick.
Fading a real trend: A sloped midline with price walking the band is telling you not to fight it.
Stops too tight: In expansion, give the trade room to the midline or local structure, not just inside the channel.
Practical defaults to start with
Length: 26
Bands Distance: 1.5
Color Candles: on (turn off if your chart is busy)
Timeframes: works out of the box on 15m–4H; for 1–5m try Length=20; for daily swings try Length=34–40.
Open source & disclaimer
This indicator is published open source so traders can learn, tweak, and build rules they trust. No tool guarantees outcomes; risk management is essential.
Disclaimer — Not Financial Advice.
The “FRAMA Channel ” indicator and this description are provided for educational purposes only and do not constitute financial or investment advice. Trading involves risk, including possible loss of capital. makes no warranties and assumes no responsibility for any trading decisions or outcomes resulting from the use of this script. Past performance is not indicative of future results.
Use FRAMA Channel for context (trend vs balance, squeeze vs expansion), Volume Profile v3.2 and Anchored VWAP for locations, and CVDv1 for flow quality. That trio keeps your trades selective and your rules consistent on any timeframe.
Elliott Wave Oscillator [JopAlgo]Elliott Wave Oscillator — a simple impulse meter that tells you when the move has “real push”
If price is the story, impulse is the emotion behind each chapter. The Elliott Wave Oscillator (EWO) is a clean way to see that emotion: it’s just the difference between a fast and a slow moving average. When the fast MA pulls away from the slow MA, the histogram grows; when they come back together, it shrinks. Above zero = bullish impulse; below zero = bearish impulse.
EWO keeps the math honest and the read effortless:
Choose SMA, EMA, or a volume-weighted average for each side (the “VWAP” option here uses a rolling VWMA over the chosen length).
A zero line anchors the read (bull vs bear).
Bars color by slope: rising = building momentum, falling = momentum fading.
(For screenshots: image #1 label the zero line, rising/falling bars, and a zero cross. Image #2 show a strong impulse leg hugging one side of zero, then fading into a pullback.)
What you’re seeing (and how it’s built)
Short MA (default 5) and Long MA (default 35) are computed using your selected MA Type (SMA, EMA, or rolling volume-weighted).
EWO = Short MA − Long MA.
EWO > 0: fast MA above slow → bullish impulse.
EWO < 0: fast MA below slow → bearish impulse.
Histogram colors:
Green bar: EWO increasing vs previous bar (momentum building).
Red bar: EWO decreasing (momentum waning).
Alerts: fire when EWO crosses the zero line (bullish or bearish “trend shift” heads-up).
New to this? Think of EWO as a throttle: above zero the engine is pushing forward; below zero it’s pushing backward. The height shows how hard it’s pushing; the color shows if that push is growing or fading right now.
How to use EWO on any timeframe
Same framework everywhere—what changes is your location and targets (from your other tools).
Scalping (1–5m)
Breakout confirmation: Only chase a micro-break if EWO flips above zero and grows green as price leaves a level (VAL/LVN/AVWAP). If it flips then immediately shrinks red, that’s your “don’t chase” warning.
Pullback timing: In a quick trend, wait for EWO to dip but stay above zero, then turn green again. That flip is often your pullback end.
Intraday (15m–1H)
Continuation filter: After a level break, ride as long as EWO stays on your side of zero. The first red bar while still above zero is a cue to partial or tighten stops.
Failed break tell: A poke through VAH/VAL with EWO still near zero (no expansion) is often a trap. Prefer retest/reclaim trades.
Swing (2H–4H)
Impulse leg ID: Strong trends show an EWO “bulge” (wide, mostly green bars above zero for longs). When that bulge shrinks back toward zero, look for mean-reversion to AVWAP/POC before the next leg.
Divergence (lightweight): Price makes a higher high, but EWO tops at a lower peak → impulse is weaker; plan for retrace to value.
Position (1D–1W)
Regime bias: Weeks where EWO lives above zero are net constructive; below zero are net distributive. Use that as a backdrop for adds/reductions at your higher-TF levels (Weekly AVWAP, composite VAL/VAH).
Entries, exits, and risk (simple rules)
Entry: At your level (from VP/AVWAP), take the side where EWO is on the correct side of zero and turning green (for longs) or red→green below zero for shorts? Careful—below zero, red means waning bear impulse. For shorts, you want EWO < 0 and increasing in magnitude (i.e., more negative) which still paints red in this script? Here’s the practical translation:
Longs: EWO > 0 and rising (green bar).
Shorts: EWO < 0 and falling (more negative vs prior bar). In this script, that also paints red—which is correct for building bearish impulse.
Manage: If your long was driven by EWO above zero, consider reducing when bars turn red repeatedly or EWO rolls back toward zero at your target node.
Invalidation: A zero cross against you after entry is a hard warning—tighten or exit unless higher-TF context strongly favors holding.
Stops: Place beyond the price level/structure you used, not on an EWO flip alone.
Settings that actually matter (and how to tune them)
MA Type (SMA / EMA / VWAP):
EMA: most responsive; great for scalping/fast intraday.
SMA: smoother; better for swings where you want fewer false wiggles.
VWAP (rolling VWMA): weights price by volume over your length—nice on pairs where volume behavior matters. (Note: this is a rolling VWMA, not an anchored session VWAP.)
Short/Long Lengths (default 5/35):
Shorter/faster (e.g., 4/20) → earlier flips, more noise.
Longer/slower (e.g., 8/50) → fewer but stronger signals.
Keep the ratio—something like 1:4 to 1:6—so the “bulge” is meaningful.
Zero-cross alerts: leave them on but treat as heads-up, not entries in isolation. You still want location + flow.
What to look for (pattern cheatsheet)
Impulse bulge: Wide, consecutive bars above zero (mostly green) → trend leg in progress. Expect shallow pullbacks only.
Pullback reset: After a leg, EWO shrinks but stays above zero, then flips green again → pullback likely done.
No-juice breakout: Price pokes the level but EWO stays near zero / flips red quickly → skip the chase; look for reclaim setups.
Divergence at extremes: New price high with lower EWO peak → risk of fade to value (POC/AVWAP).
Combining EWO with other tools
Cumulative Volume Delta v1 (CVDv1):
Use EWO for impulse, CVDv1 for quality. Best trades line up as:
EWO > 0 and increasing + CVDv1 ALIGN = OK + Imbalance strong + Absorption ≠ red → take the breakout/retest.
If EWO says “go” but CVDv1 flags Absorption, don’t chase.
Volume Profile v3.2:
Use VAH/VAL/LVNs/POC as where. EWO tells you if the push has fuel to leave/enter value.
Example: VAL retest with EWO turning up → rotate to POC/HVN.
Anchored VWAP:
Reclaims are higher quality when EWO flips above zero on the reclaim bar and holds green on the first pullback.
(Optional mention in screenshots: show a VAH break where EWO bulges and CVDv1 shows Alignment OK—clean continuation.)
Common pitfalls EWO helps you avoid
Buying a break with no impulse: Zero-line hugs and shrinking bars tell you the fast MA isn’t pulling away—skip.
Fading a real leg: Wide, persistent bars on one side of zero = don’t fight; use pullbacks to value instead.
Confusing volume-weighted vs anchored VWAP: The “VWAP” choice here is a rolling VWMA over the lookback, not a session/event AVWAP. Use Anchored VWAP when you need the true event-anchored line.
Practical defaults to start with
MA Type: EMA
Short/Long: 5 / 35
Timeframes: works out of the box on 15m–4H; for 1–5m try 4/20; for daily swings try 8/50.
Keep zero-cross alerts on as an attention ping; still require location + flow.
Alerts (what they mean)
Bullish EWO Signal: EWO crossed above zero → bullish impulse engaged. Look for a retest at your level with CVDv1 quality before entry.
Bearish EWO Signal: EWO crossed below zero → bearish impulse.
Open source & disclaimer
This indicator is published open source so traders can study it, tweak it, and build rules they trust. Tools inform decisions, but risk management decides outcomes.
Disclaimer — Not Financial Advice.
The “Elliott Wave Oscillator ” indicator and this description are provided for educational purposes only and do not constitute financial or investment advice. Trading involves risk, including possible loss of capital. makes no warranties and assumes no responsibility for any trading decisions or outcomes resulting from the use of this script. Past performance is not indicative of future results.
Use EWO to judge when there’s real push, Volume Profile v3.2 and Anchored VWAP for where to act, and CVDv1 to verify who’s actually pushing. That trio keeps you selective on any timeframe.
Cycle Momentum Filter [JopAlgo]Cycle Momentum Filter (CMF) — spot “when” to engage the market, on any timeframe
Markets breathe in cycles (expansion → contraction) while momentum and trend decide which moves actually travel. CMF is a compact filter that blends those ideas so you can answer two questions before you click:
Is this a good moment to take a trade? (cycle position)
If I take it, is there enough force behind the move to carry it? (momentum + trend)
CMF does not replace your levels—use it with your location tools (e.g., Volume Profile v3.2 and Anchored VWAP). It simply keeps you out of entries taken at the wrong part of the swing or against weak momentum.
(When you add screenshots: image #1 should label each sub-line and the green/yellow/red background; image #2 can show CMF turning green at VAL + AVWAP before a rotation back to POC.)
What you’re seeing (and how to read it at a glance)
CMF draws five sub-lines around a zero line, plus a background color:
Cycle Oscillator (blue): where you are in the swing. Above zero ≈ cycle crest side; below zero ≈ trough side.
ROC % (purple): short-term price acceleration. Above zero = positive momentum; below zero = negative.
MACD Histogram (orange): classic impulse measure (fast–slow EMA gap). Above zero = bullish impulse.
EWO (cyan): Elliott Wave Oscillator (EMA fast – EMA slow). Above zero = trend tilt up.
RSI-MA (gray, plotted as RSI−50): smoothed RSI relative to 50. Above zero = buyers have the relative strength.
Background color = the filter result:
Green → bullish window: cycle favors longs and momentum/trend/RS confirm.
Red → bearish window: mirror logic.
Yellow → neutral: at least one piece disagrees—do less, or wait for alignment.
For new traders: Every sub-line crossing above/below zero is a yes/no vote. Green happens only when all bullish checks are true; red when all bearish checks are true.
How CMF is built (plain-English version)
Cycle (DPO-style): CMF subtracts a displaced SMA from price to remove trend and expose the swing. Below 0 = you’re on the dip side of the cycle; above 0 = rally side.
Momentum (ROC): percent change over roc_length bars; tells you if price is actually accelerating.
Impulse (MACD hist): measures push from fast vs slow EMAs.
Trend tilt (EWO): broader drift via two EMAs (fast/slow).
Participation bias (RSI-MA): smoothed RSI relative to 50 (plotted as RSI−50 so its zero line matches the others).
The signal rules are strict AND conditions:
Bullish = cycle < 0 and ROC > 0 and MACD hist > 0 and EWO > 0 and RSI-MA > 0.
Bearish = cycle > 0 and ROC < 0 and MACD hist < 0 and EWO < 0 and RSI-MA < 0.
Otherwise Neutral.
This strictness is deliberate: it cuts a lot of low-quality entries.
Using CMF on any timeframe
The framework is the same—only your anchors/targets change as you zoom.
Scalping (1–5m)
Where: VP v3.2 VAL/VAH/LVNs or Session AVWAP.
When: take longs when CMF turns green on/after a dip to your level; shorts when it turns red on/after a pop into resistance.
Skip: yellow reads in the middle of the range; that’s chop.
Tip: on very fast pairs, require two consecutive green/red bars before entry.
Intraday (15m–1H)
Use CMF green to time pullbacks to AVWAP or VA edges in the trend direction.
In balance days, wait for CMF color + level alignment to fade back to POC.
If CMF flips yellow after entry, tighten risk; if it flips against you, consider exiting early.
Swing (2H–4H)
Treat first green after a higher-timeframe pullback to Weekly AVWAP or composite VAL as your A-setup.
If CMF stays green through the first pullback, consider adding; the opposite for red in downtrends.
Position (1D–1W)
Fewer, bigger decisions: CMF green at Monthly/Quarterly AVWAP or at composite VAL suggests rotation toward POC/HVNs; CMF red at VAH suggests mean-reversion lower.
If CMF can’t turn green/red at key retests, that’s valuable: the level likely won’t hold.
Entries, exits, and risk (simple rules)
Entry: trade at a level when CMF just flips to your side (green for longs / red for shorts).
Invalidation: if CMF reverts to yellow immediately, it’s a warning; if it flips to the opposite color, that’s your soft stop condition—tighten or exit unless higher-timeframe context argues otherwise.
Targets: use Volume Profile v3.2 (POC/HVNs) and AVWAP (mean) for logical destinations.
Don’t use CMF alone for stops; place them beyond the level or structure.
Settings that actually matter (and how to tune them)
Cycle Length (default 20): swing detection.
Shorter (10–14): quicker flips, better for scalps.
Longer (30–40): steadier cycle for swings/position.
ROC Length (default 10): momentum lookback.
Shorter: earlier yes/no, more noise.
Longer: slower, more selective.
MACD Fast/Slow (5/13) & EWO Fast/Slow (5/35): impulse and drift.
Increase slow values to calm false flips; decrease fast to react sooner.
RSI Length (14) & Smoothing (5): participation tilt.
Reduce smoothing for faster confirmation; increase to avoid whips.
Background on/off: keep it on while learning; once you’re comfortable, you can hide the background and read the lines against zero.
Tuning tip: If you trade only a few coins, optimize Cycle and ROC first; leave MACD/EWO defaults. Then decide how strict you want RSI (try RSI smoothing = 3 for faster reads).
What to look for (pattern cheatsheet)
Green at a dip-level (VAL/AVWAP) → rotate toward POC/HVN.
Red at a pop-level (VAH/AVWAP) → rotate down toward POC/HVN.
Color holds through the retest → continuation is more likely.
Color flips against the breakout → watch for failed break and reclaim.
Only one line disagrees (e.g., ROC < 0 while others > 0) → expect slower follow-through; consider waiting one bar.
Combining CMF with other tools
Volume Profile v3.2 :
Use VAH/VAL/POC/LVNs for where. CMF answers when.
Green at VAL → mean-reversion long to POC.
Red at VAH → fade to POC.
LVN breaks with green often travel quickly to the next HVN.
Anchored VWAP :
Reclaim of AVWAP + CMF turns green → higher-quality long; rejection + red → cleaner short.
Weekly AVWAP + CMF color is a reliable swing compass.
Cumulative Volume Delta v1 (CVDv1):
CMF says “now”, CVDv1 says “how good”.
Prefer CMF green when CVDv1 Alignment = OK, Imbalance strong, Absorption ≠ red.
If CMF flips green but CVDv1 shows Absorption (red), do not chase; look for a reclaim instead.
Common pitfalls CMF helps you avoid
Buying high in the cycle: CMF keeps longs to when the cycle is on the dip side and momentum/trend agree.
Forcing trades on yellow: yellow is your do-less mode—wait for alignment.
Ignoring flow at levels: CMF gives the window, but quality still matters; confirm with CVDv1.
Practical defaults to start with
Cycle 20 | ROC 10 | MACD 5/13 | EWO 5/35 | RSI 14 (smooth 5)
Works out of the box on 15m–4H.
For scalps, try Cycle 14 / ROC 7–9 / RSI smooth 3.
For daily swings, Cycle 30–34 / ROC 12–14.
Alerts (what they tell you)
Bullish Signal: CMF turned green (all bullish checks passed). Use it as a heads-up; still anchor the entry to VP/AVWAP.
Bearish Signal: CMF turned red. Same rule: wait for the level.
Open source & disclaimer
This indicator is published open source so traders can learn, tweak, and build rules they trust. Tools guide decisions; risk management decides outcomes.
Disclaimer — Not Financial Advice.
The “Cycle Momentum Filter ” indicator and this description are provided for educational purposes only and do not constitute financial or investment advice. Trading involves risk, including possible loss of capital. makes no warranties and assumes no responsibility for any trading decisions or outcomes resulting from the use of this script. Past performance is not indicative of future results.
Directional Indicator Crossovers [JopAlgo]Directional Indicator Crossovers — read trend intent at a glance, on any timeframe
Most traders ask two questions before they click: who’s in control right now and is control getting stronger or weaker?
The Directional Indicator (DI) answers the first one cleanly. +DI tracks upward directional movement; –DI tracks downward directional movement. When +DI crosses above –DI, buyers have the initiative; when –DI crosses above +DI, sellers do. DI Xover focuses on that simple, tradeable signal—the crossover—and keeps the pane uncluttered so you can layer it with your location/flow tools.
(If you add screenshots: image #1 can label +DI, –DI and a bullish crossover; image #2 can show a failed crossover in chop next to a successful one at a strong level.)
What you’re seeing (and how it’s built)
This indicator plots two lines in a separate pane:
+DI (green): smoothed positive directional movement.
–DI (red): smoothed negative directional movement.
Under the hood (length = 14 by default):
It measures how much today’s high exceeded yesterday’s high (up move) and how much today’s low fell below yesterday’s low (down move).
It keeps only the dominant side each bar (if up > down and up > 0 → up counts; vice-versa for down).
It normalizes by True Range (so moves are scaled by volatility) and smooths with RMA (so you don’t get jitter).
It raises alerts when +DI crosses above –DI (bullish) or –DI crosses above +DI (bearish).
How to read it, fast:
Cross up = buyers just took initiative.
Cross down = sellers just took initiative.
Wider distance between the lines = stronger control.
Lines braided/tight = balance/chop → expect more fake crosses.
DI is about directional control. It doesn’t tell you where to trade—that’s your location (e.g., Volume Profile, AVWAP). Use DI as a timing/confirmation layer, not as a standalone level generator.
Using DI Crossovers on any timeframe
The framework doesn’t change; only your expectations do as you zoom.
Scalping (1–5m)
Treat crossovers as triggers at levels. If price is tagging VAL/VAH/LVN (from Volume Profile v3.2) or Anchored VWAP, a fresh +DI cross up is your green light for a quick long; –DI cross up flips that logic for shorts.
Avoid taking every crossover mid-range—wait for location first.
In fast tape, require the lines to separate for 1–2 bars after the cross before you click.
Intraday (15m–1H)
In trend days, the first pullback into your level (POC/VA boundary/AVWAP) that prints a fresh +DI cross up is often the cleanest add/entry.
In balance days, fade DI crosses at edges back to POC—only if your flow tool isn’t screaming absorption against you.
Swing (2H–4H)
Look for confluence: at Weekly AVWAP or composite VAL/VAH, a DI crossover that stays separated for several bars is a solid momentum confirmation.
Failed crossover (lines recross quickly) near a level is a useful fail signal—expect a move back into value.
Position (1D–1W)
Use fewer, bigger signals: a weekly DI cross at Monthly/Quarterly AVWAP or at composite value edges marks a regime change.
Add on pullbacks when the controlling DI stays dominant (distance holds or widens).
Entries, exits, and risk (simple rules)
Entry (with level): wait for price to reach your level (e.g., VAL/VAH or AVWAP), then take the trade with the DI cross in that direction.
Filter: skip crosses when the two lines are braided (tiny separation) unless you’re trading a tight scalp with strict risk.
Exit / reduce: if your trade was based on a bullish cross, consider reducing when –DI recaptures +DI or the lines flatten at your target HVN/POC.
Stops: put them beyond the level (not just on a DI recross), but treat a fast recross as a warning to tighten.
Settings that actually matter (and how to tune them)
DI Length (default 14):
Shorter (7–10) = faster signals, more noise (good for scalps with filters).
Longer (20–30) = fewer but stronger signals (good for swing/position).
If you often see flip-flops, lengthen the setting or take crosses only at VP/AVWAP levels.
Pro tip: Define a minimum separation rule for yourself (e.g., after a cross, require the gap between +DI and –DI to increase on the next bar). You don’t need extra code for this—just enforce it visually.
What to look for (pattern cheatsheet)
Cross + hold at a level: The lines cross at your level and keep separating → high-quality entry in that direction.
Sneaky fail: Cross, then immediate recross back → treat it as a fade signal back into value (especially near VAH/VAL).
Strength confirmation: After a breakout, +DI stays above –DI on pullbacks → trend is healthy; buy dips at AVWAP/POC.
Pre-move tell: DI lines unbraid and begin diverging before price leaves a range; wait for location + trigger.
Combining DI Xover with other tools
Cumulative Volume Delta v1 (CVDv1):
Use DI for direction, and CVDv1 for quality. A bullish DI cross with ALIGN OK + Imbalance strong + no Absorption is a far better long than DI alone.
If DI crosses up but CVDv1 flags Absorption (red), don’t chase—look for the fail/reclaim instead.
Volume Profile v3.2 :
Let VP choose the battleground (POC/VAH/VAL/LVNs). Take the DI crossover at those references.
Classic: bearish DI cross at VAH → fade toward POC; bullish DI cross at VAL → rotate to POC—assuming CVDv1 isn’t vetoing with Absorption.
Anchored VWAP :
Treat reclaims/rejections of AVWAP as the location and DI cross as the trigger.
Example: price reclaims Weekly AVWAP, then on the next pullback, a +DI cross up confirms the add.
Common pitfalls this helps you avoid
Trading crosses in the middle of nowhere. DI is a trigger, not a level; wait for VP/AVWAP.
Chasing every wiggle. When the lines are braided, you’re likely in balance—expect fake crosses.
Ignoring flow. A DI cross against CVDv1 Absorption is often a trap; quality > quantity.
Practical defaults to start with
Length: 14
Timeframes: Works out of the box on 15m–4H. For 1–5m scalps try 10–12; for daily/weekly swings try 20–30.
Process: Only act on crosses at levels (VP v3.2 / Anchored VWAP), and prefer those where CVDv1 says ALIGN OK and no Absorption.
Alerts (what they tell you)
Bullish DI Crossover: +DI crossed above –DI → buyers just took initiative. Look to your chart for location and CVDv1 quality before entering.
Bearish DI Crossover: –DI crossed above +DI → sellers took initiative. Same rule: confirm at a level with flow.
Open source & disclaimer
This indicator is published open source so traders can learn, adapt, and build rules they trust. No tool guarantees outcomes; risk management remains essential.
Disclaimer — Not Financial Advice.
The “Directional Indicator Crossovers ” indicator and this description are provided for educational purposes only and do not constitute financial or investment advice. Trading involves risk, including possible loss of capital. makes no warranties and assumes no responsibility for any trading decisions or outcomes resulting from the use of this script. Past performance is not indicative of future results.
Keltner Channels v1 [JopAlgo]Keltner Channels v1 — a clean volatility envelope for timing pullbacks, breakouts, and risk
Keltner Channels are a moving-average centerline with volatility-based bands above and below. They give you a live “speed limit” for price: when the market is calm, bands are tight (expect mean reversion); when volatility expands, bands widen (trend moves can breathe). KC v1 keeps the classic idea but adds a small twist that traders appreciate in crypto: an adaptive centerline that switches between EMA and SMA based on trendiness, plus a choice of how you measure volatility for the bands.
This makes KC v1 useful for any timeframe—from fast scalps to multi-day swings—because it answers three practical questions on every chart:
Where’s the “middle” of price right now? (the centerline)
How far is “far” for current volatility? (the bands)
Should I fade back to the middle or ride with the expansion? (context from band width + slope)
If you attach screenshots to your script page, show one image labeling Upper / Middle / Lower bands with a classic pullback-to-middle entry, and another showing a band expansion where price hugs the outer band in trend.
What you’re seeing (and how it’s computed)
Middle band (MA):
KC v5 computes both an EMA and an SMA of your source (default close) with the same length, then auto-selects the middle band:
If ATR > SMA(ATR) over length, KC marks the market as trending and uses the EMA (faster, responsive).
Otherwise, it uses the SMA (steadier) in balance.
Result: you get a centerline that’s calm in chop and snappier in trend, without touching settings.
Upper / Lower bands:
upper = middle + (mult × volatility)
lower = middle - (mult × volatility)
You choose the volatility measure via Bands Style:
Average True Range (default): smooth, robust; uses ATR(atrlength). Best all-around choice.
True Range: raw TR each bar (more jumpy; reacts to gaps and spikes quickly).
Range: RMA of (high - low) over length (gentler; good for tight mean-reversion regimes).
Colors & fill:
Upper = red, Lower = green, Middle = white, with muted fill between bands so you can still read candles.
How to use Keltner Channels on any timeframe
Same framework everywhere: trade with the envelope when expanding, fade back to the middle when contracting—but only at objective locations and with healthy flow.
Scalping (1–5m)
Pullback-to-middle entry: In a micro-trend, wait for price to retrace to the middle band and print a hold. Enter with the trend, stop just beyond the opposite side of the middle or below minor structure; first target is the near band.
Band tap fades (only in contraction): When bands are tightening and the middle is flat, quick fades from upper → middle or lower → middle are high-probability if your volume/flow read doesn’t show aggressive pressure against you.
Avoid: Fading when bands expand and middle slopes—expect continuation instead.
Intraday (15m–1H)
Continuation rides: When bands open up (volatility expansion) and the middle slopes, price often walks the outer band. Enter on minor pullbacks that hold above the middle (for longs) and trail using the middle band or a structure stop.
Squeeze to break: A period of narrowing bands often precedes a move. Let price close outside the channel with good flow, then buy the retest toward the middle that holds.
Swing (2H–4H)
Trend participation: In established trends, treat pullbacks to the middle band as your primary entry. The upper/lower band is not a take-profit by itself—use it with Volume Profile targets (POC/HVNs) or key swing levels.
Mean reversion in balance: When the middle is flat and bands are tight over many bars, fade outer band → middle at Volume Profile edges, provided your flow read isn’t showing absorption against your idea.
Position (1D–1W)
Context: Use KC to judge regime (wide bands + slope = trend; tight/flat = balance). Position entries come from pullbacks to middle that coincide with Weekly AVWAP / VP value edges.
Entries, exits, and risk (simple rules)
Trend entry (with expansion):
Wait for band expansion + sloping middle in your direction. Enter on the first clean pullback to middle (or shallow pullback that can’t even tag middle).
Stop: below the middle band or just beyond local swing.
Trail: by the middle band in trend, or step-trail under pivots.
Targets: next Volume Profile HVN/POC or structural levels; the far Keltner band is a context line, not a hard TP.
Mean-reversion entry (in contraction):
Bands tight + flat middle → fade outer band back to middle at a Volume Profile VA edge.
Stop: just beyond the band.
Target: middle band (first), opposite band if flow remains weak.
Breakout confirmation:
A strong close outside the band by itself can be a trap. Treat it as signal only when your flow read confirms (see “Combining with other tools”).
Settings that actually matter (and how to tune them)
MA Length (default 20): controls both middle smoothness and the trending test (ATR vs SMA(ATR)).
Shorter (10–14) reacts faster, more whips in chop.
Longer (30–50) steadier middle, better for swings/position.
Multiplier (default 2.0): scales band distance.
Crypto majors: 1.8–2.2 is a good starting range on 15m–4H.
Volatile alts: 2.2–2.6 to avoid over-triggering.
If you keep getting faked out on fades: increase the multiplier.
If the channel rarely contains price for long stretches: decrease slightly.
Bands Style:
ATR for most use cases;
TR when you want maximum responsiveness to spikes;
Range for calmer envelopes in slow, balanced markets.
ATR Length (default 10): only applies if you choose ATR for band style.
Shorter = quicker band changes, good for scalps;
Longer = steadier bands for swings.
Note: KC v1 auto-selects EMA vs SMA for the middle band using the ATR trend test. That’s intentional, so you don’t have to toggle it manually.
What to look for (pattern cheatsheet)
Walk-the-band: In expansion, price hugs the outer band and barely returns to the middle—ride, don’t fade.
First touch of middle in trend: Often the cleanest add or first entry after a breakout.
Band pinch (“squeeze”): A long, narrow channel with flat middle sets up a breakout. Wait for acceptance (close outside + hold on retest).
False break tell: Price pokes outside band but closes back inside quickly—watch for reversion to middle, especially if your flow read shows Absorption against the poke.
Combining KC v1 with other tools
like the Cumulative Volume Delta v1 (CVDv1):
Do not chase an outside-band move if CVDv1 shows Absorption—that’s a classic failed break.
Prefer pullbacks to the middle band when Alignment = OK and Imbalance % is strong in your direction.
Reclaim setups: after a poke outside the band, a CVD divergence on the return through the middle often precedes a mean-reversion run.
Volume Profile v3.2 :
Use VAH/VAL/LVNs for location. A pullback-to-middle that coincides with VA boundary is A-tier.
Breakouts through LVNs with expanding bands tend to travel fast toward the next HVN/POC—good for continuation targets.
(A great screenshot: KC middle kiss at VAL with CVDv1 Efficient, then a move to POC.)
Common pitfalls KC v1 helps you avoid
Fading expansion: Trying to short the upper band when bands are widening and middle slopes up is how you get steamrolled. KC tells you it’s not that kind of day.
Chasing inside contraction: Buying every tiny outside poke while bands are pinched leads to whips. Let acceptance form; buy the retest to middle that holds.
Stops too tight: In trend, volatility is elevated; stops need to live beyond the middle or behind structure, not right at the band.
Practical defaults to start with
Length: 20
Multiplier: 2.0 (adjust ±0.2–0.4 per asset)
Bands Style: ATR
ATR Length: 10
Timeframes: works out of the box on 15m–4H; for 1–5m scalps, consider length=14; for daily swings, length=30.
Open source & disclaimer
This indicator is provided open source so traders can study, test, and adapt it to their workflow. No tool guarantees outcomes; risk management is essential.
Disclaimer — Not Financial Advice.
The “Keltner Channels v1 ” indicator and this description are provided for educational purposes only and do not constitute financial or investment advice. Trading involves risk, including possible loss of capital. makes no warranties and assumes no responsibility for any trading decisions or outcomes resulting from the use of this script. Past performance is not indicative of future results.
DTM 444 BANDS 🚀DTM 444 BANDS 🚀:
The DTM 444 BANDS 🚀 is a powerful, multi-purpose trading indicator combining Supertrend, Dynamic Band Levels, Breakout Signals, and Volume Confirmation to help traders identify high-probability trade setups across different timeframes.
🔧 Key Features
✅ Multi-Timeframe Support
Analyze price action across any timeframe using the Timeframe input.
All band calculations (High, Low, Midline, and Supertrend) are pulled from a higher timeframe for clearer context.
✅ Dynamic Bands Based on Supertrend
High Band: Rolling highest of Supertrend over hiLen period.
Low Band: Rolling lowest of Supertrend over loLen period.
Midline: Midpoint of the above.
Acts like dynamic support/resistance, ideal for trend-following and breakout strategies.
✅ Dual Signal System
Breakout Signals (Buy and Sell): Triggered when price breaks the bands with volume confirmation.
Supertrend Crossover Signals (Buy1 and Sell1): Classic momentum entries with a confirmation twist.
Exit Signals: Optional take-profit/neutral indicators when price reverses.
✅ Volume Confirmation Filter (Optional)
Only triggers signals if the volume exceeds its 20-period SMA.
Helps filter out false breakouts and weak trends in low-liquidity periods.
✅ Visual Enhancements
Color-coded candles based on band positioning (e.g., red = weak, green = strong, etc.)
On-chart labels for each signal for quick reference.
Real-time Signal Dashboard using Pine Script tables showing:
Current signal
Volume filter status
Live volume vs volume SMA
🧪 Practical Use Cases
Trend Traders: Use the Supertrend cross and band breakouts to ride trends early.
Breakout Traders: Catch high-probability moves outside established ranges.
Swing Traders: Time entries and exits using color-coded bars and exit labels.
Volume-Sensitive Traders: Focus on trades with strong volume backing.
📊 Backtest Snapshot
Based on the example chart for Reliance Industries (RELIANCE.NS) on the weekly timeframe:
Several profitable buy and breakout signals during uptrends.
Timely exits and breakdown alerts before reversals.
Volume filter keeps trades clean and avoids noise.
⚙️ Customizable Parameters
High Length and Low Length (default: 19)
Supertrend Multiplier and ATR Length
Volume Filter: Toggle ON/OFF
Volume SMA Length: Default 20
Custom Timeframe: Choose any higher timeframe for multi-timeframe analysis
📢 Alerts Ready
Fully integrated with TradingView alerts:
Breakout & Breakdown
Supertrend crossovers
All alerts respect the volume filter setting
🏁 Final Thoughts
DTM 444 BANDS 🚀 is a versatile and adaptive trading system that blends trend analysis, volatility bands, and volume validation. Whether you're a trend trader, breakout hunter, or swing trader — this tool gives you a structured edge with clear visual cues and real-time alerts.
3SMA (1H only) by tophengzkyThis script plots three Simple Moving Averages (SMA 10, 20, 50), but they are only visible when the chart timeframe is set to 1 hour (1H).
It helps traders focus on higher timeframe trend direction without cluttering charts on other timeframes.
SMA1 = 10 (white)
SMA2 = 20 (yellow)
SMA3 = 200 (red)
Works only on 1H timeframe
Useful for swing traders and intraday traders who rely on hourly trend confirmation.
why 1 hr only? the only purpose of this is just to know the bias of the market weather it will reverse or it will continue the trend. As long as the price action did not cross this 3 SMA's the trend will continue.
as a trend trader it is very useful this strategy.. make it simple!
💎DrFX Diamond Algo 💎Diamond Algo - Multi-Feature Trading System
Advanced trading system combining Supertrend signals with multiple confirmation filters, risk management tools, and a comprehensive market analysis dashboard.
═══ CORE FEATURES ═══
• Smart Buy/Sell signals using modified Supertrend algorithm
• Multi-timeframe trend analysis (M1 to D1)
• Support & Resistance zone detection
• Risk management with automatic TP/SL levels (1:1, 2:1, 3:1)
• Real-time market dashboard with key metrics
• Multiple trend cloud overlays for visual confirmation
═══ SIGNAL GENERATION ═══
BUY Signal:
• Supertrend bullish crossover
• Price above SMA filter
• Optional smart signals (EMA 200 confirmation)
SELL Signal:
• Supertrend bearish crossunder
• Price below SMA filter
• Optional smart signals (EMA 200 confirmation)
═══ DASHBOARD COMPONENTS ═══
• Multi-timeframe trend status (8 timeframes)
• Current position indicator
• Market state analysis (Trending/Ranging/No trend)
• Volatility percentage
• Institutional activity monitor
• Trading session tracker (NY/London/Tokyo/Sydney)
• Trend pressure indicator
═══ VISUAL OVERLAYS ═══
• Trend Cloud: Long-term trend visualization
• Trend Follower: Adaptive trend line
• Comulus Cloud: Dual ALMA-based trend zones
• Cirrus Cloud: Short-term trend bands
• Smart Trail: Fibonacci-based trailing stop
• Dynamic trend lines with breakout alerts
═══ RISK MANAGEMENT ═══
• Automatic Stop-Loss placement (ATR-based)
• Three Take-Profit levels with Risk:Reward ratios
• Entry price labeling
• Optional distance and decimal customization
• Visual lines connecting entry to targets
═══ INPUT PARAMETERS ═══
Sensitivity (1-20): Controls signal frequency
Smart Signals Only: Filters for high-probability setups
Bar Coloring: Trend-based or gradient coloring
Dashboard Location/Size: Customizable placement
Multiple overlay toggles for clean charts
═══ BEST PRACTICES ═══
• Lower sensitivity (1-5) for swing trading
• Higher sensitivity (10-20) for scalping
• Enable Smart Signals for conservative approach
• Use dashboard to confirm multi-timeframe alignment
• Monitor volatility % before entering trades
═══ ALERT CONDITIONS ═══
• Buy Alert: Triggered on bullish signal
• Sell Alert: Triggered on bearish signal
• Trend line breakout alerts (automated)
═══ VERSION INFO ═══
Pine Script: v5
Max Labels: 500
Repainting: Minimal (uses confirmed bars for signals)
```
Liquidity Spectrum Visualizer [BigBeluga] [Optimized]This version of Liquidity Spectrum Visualizer (© BigBeluga) has been optimized to improve execution speed and reduce script load times without altering the visual output or analytical logic of the original indicator. The key improvements focus on reducing computational complexity, eliminating redundant calculations, and minimizing expensive function calls within loops.
Core Optimization Changes
Single-Pass Volume Binning (O(N) instead of O(N×M))
Original: For each bin (100) the script iterated through every bar (lookback), resulting in ~20,000 operations.
Optimized: Each bar is processed once to directly calculate its bin index. This reduces the loop complexity from O(N×M) to O(N), where N = lookback.
Precomputed Min/Max Values
Original: array.min() and array.max() were repeatedly called inside loops, re-scanning arrays hundreds of times.
Optimized: Min and max are computed once before all calculations and reused, reducing computational overhead.
Reduced Label Creation
Original: Labels were created in every iteration, potentially hundreds of times per update — a very expensive operation in Pine.
Optimized: Only two labels are created for significant high and low levels, cutting down label calls by ~99%.
Efficient Resource Management
All boxes and lines are cleared once before re-rendering instead of being deleted individually inside nested loops.
Optional gradient rendering and POC drawing remain, but only after binning is complete.
Performance Evaluation
The most important change is the reduction of loop complexity — instead of performing around 20,000 iterations per update, the optimized version now processes only about 200. This reduces execution time and makes the indicator much lighter.
Function calls such as min() and max() are now calculated only once instead of hundreds of times, which removes unnecessary overhead. Likewise, label creation has been reduced from hundreds of labels per refresh to just two, further improving performance.
As a result, the average loading time of the indicator dropped from roughly 1.5–3 seconds to about 0.05–0.2 seconds on typical datasets.
自定义均线（多色 & 分级线宽）Title: Multi-Color Moving Average Suite (MA5…MA4320) — Pine v6
Summary (1–2 lines):
An overlay indicator that plots a full ladder of SMA lines from MA5 up to MA4320. Each MA has a unique color, and line width scales with period (short = thin, mid = medium, long = thick) to make trend structure easy to read at a glance.
What it does
• Plots 16 simple moving averages: 5, 10, 20, 30, 60, 120, 160, 240, 480, 720, 960, 1440, 1750, 2880, 4320.
• Distinct colors for every MA to avoid confusion when lines cluster.
• Period-based thickness:
• Short-term (<60) = thin,
• Mid-term (60–160) = medium,
• Long-term (≥240) = thick (capped; no unlimited growth).
• Designed for quick trend reading across intraday to multi-year cycles (especially useful for 24/7 markets like crypto).
How to use
1. Add the indicator to any chart (works on all symbols/timeframes).
2. Use the thin/medium/thick visual hierarchy to identify short-/mid-/long-term bias and crossovers.
3. On very low timeframes, consider hiding some ultra-long MAs if your chart has insufficient history.
Notes
• Built with Pine Script v6; uses ta.sma(close, length) only (no repainting).
• Very long MAs (e.g., 2880/4320) require enough bars; they will display na until sufficient history loads.
• No inputs/alerts by default—kept intentionally simple for clarity. (Easy to extend with toggles, custom colors, EMA/WMA options, alerts, etc.)
Credits
Author: TraderFinsher (customized multi-MA visualization with color and thickness hierarchy).
⸻
标题： 多色均线系统（MA5…MA4320）— Pine v6
摘要（1–2 句）：
这是一个叠加在价格上的 SMA 均线组，从 MA5 到 MA4320。为每条均线设置了 独立颜色，并按 周期长度分级线宽（短=细、中=中等、长=较粗），让趋势结构一眼可读。
功能说明
• 绘制 16 条简单移动平均线：5、10、20、30、60、120、160、240、480、720、960、1440、1750、2880、4320。
• 全部不同颜色，避免密集时混淆。
• 线宽随周期分级：
• 短期（<60）= 细，
• 中期（60–160）= 中等，
• 长期（≥240）= 粗（封顶，不再无限加粗）。
• 适合从日内到多年周期的 趋势快速判读（对加密等 24/7 市场尤为友好）。
使用建议
1. 将指标添加到任意品种/周期。
2. 结合细/中/粗的视觉层级，判断短/中/长趋势与均线交叉。
3. 在较低周期下，如果历史数据不足，可隐藏部分超长均线。
注意事项
• 使用 Pine v6，仅调用 ta.sma(close, length)，不重绘。
• 超长均线需要足够历史数据，未满足前会显示 na。
• 默认不含参数和告警，追求简洁清晰（后续可扩展开关、自定义颜色/线宽、EMA/WMA 选项与告警等）。
致谢
作者：TraderFinsher（基于颜色与线宽层级的多均线可视化）。
Atlantean Sideways / Range Regime DetectorPurpose
When using trend based indicators, you can skip the false signals when there is a sideways action, protecting you from the false signals.
Flags likely sideways/range phases using three checks:
Weak trend (ADX from DMI)
Price compression (Bollinger Band Width, normalized)
Low volatility (NATR = ATR/Price%)
Logic
isSideways = (ADX < adxThresh) AND (bbNorm < 0.25) AND (NATR < natrMax)
When true: bars + background turn teal and a provisional Range High/Low (rolling rangeWin) is drawn.
Key Inputs
DMI: diLen(22)
Optimized for 15 mins Bitcoin, could change it to 14 for more general approach
ADX: adxSmooth(14), adxThresh(18)
Volatility: lenATR(14), natrMax(1.8)
Visuals: rangeWin(20), bar/range toggles
Quick Tuning
More signals: raise adxThresh to 20–25, raise natrMax to 2.5–4.0, increase BB cutoff by editing bbNorm < 0.25 --> 0.35–0.50.
Smoother range lines: increase rangeWin to 30–40.
Use Cases
Mean reversion inside teal ranges.
Breakout prep when price closes outside the drawn range after teal ends. Could be used as a signal although not suggested.
Filter trend systems: skip trades when sidewaysCond is true. This is the main purpose, for it to be combined with trend based indicators, like Supertrend.
Alert
“Sideways Detected” triggers when isSideways is true.
Script could be expanded upon your requests.
Swing Dashboard - Pro Trader Metrics with MTF & Enhanced VolumeDESCRIPTION:
A comprehensive real-time dashboard designed for swing traders and active investors trading US equities. Displays all critical metrics in one customizable panel overlay - no need to clutter your chart with multiple indicators.
KEY FEATURES:
📊 Relative Strength Analysis:
Stock vs Market (SPY/QQQ/IWM/DIA)
Stock vs Sector (automatic sector ETF detection)
Sector vs Market comparison
Customizable lookback period (5-60 days)
📈 Price & Range Metrics:
Daily range, change, and gap percentages
Distance from SMA20, SMA50, VWAP
52-week position percentage
ATR% and ADR% for volatility assessment
Range/ADR ratio for breakout detection
💪 Advanced Volume Analysis:
RVOL (full day volume vs 20-day average)
Volume Strength (bar-by-bar analysis)
Volume Trend (5-day vs 20-day momentum)
Customizable RVOL alert thresholds
Non-repainting volume calculations
⚙️ Multi-Timeframe (MTF) Mode:
View daily charts with 5-min or 15-min metric updates
Perfect for monitoring positions without switching timeframes
All calculations remain accurate across timeframes
🎨 Fully Customizable:
Choose which metrics to display
9 position options for the dashboard
Adjustable text size and colors
Toggle individual metrics on/off
Sector-specific ETF mapping for accurate RS calculations
TECHNICAL SPECIFICATIONS:
✅ Non-repainting - all calculations use confirmed bar data
✅ No lookahead bias or future data
✅ Optimized for US stocks with proper sector mapping
✅ Works on any timeframe (best on 5m-Daily)
✅ Pine Script v6 with best practices
✅ Handles edge cases and missing data gracefully
IDEAL FOR:
Swing traders monitoring multiple positions
Day traders needing quick metric overview
Investors tracking relative strength and momentum
Anyone who wants institutional-grade metrics in one place
SECTOR ETF MAPPING:
Automatically maps to correct sector ETFs: XLK, XLF, XLV, XLY, XLP, XLE, XLB, XLI, XLRE, XLC, XLU
HOW TO USE:
Green = Positive/Strong | Red = Negative/Weak | White = Neutral
RS > 0 = Outperforming benchmark/sector
RVOL > 1.5x = High volume day
VWAP% negative = Price below VWAP (mean reversion opportunity)
R/ADR > 100% = Extended range (potential exhaustion)
Perfect for traders who need professional-grade analysis without chart clutter.
TAGS:
dashboard, swing, relativestrengrh, sectoranalysis, volume, rvol, multitimeframe, mtf, tradingdashboard, metrics, daytrading, swingtrading, momentum, vwap, atr, volatility, volumeanalysis
MAs+Engulfing O caminho das Criptos
This indicator overlays multiple moving averages (EMAs 20/50/100/200 and SMA 200) and highlights bullish/bearish engulfing candles by dynamically coloring the candle body. When a bullish engulfing is detected, the candle appears as a strong dark green; for bearish engulfing, a more vivid red. Normal candles keep classic lime/red colors. Visual alerts and bar coloring make price-action patterns instantly visible.
Includes built-in alert conditions for both patterns, supporting both trading automation and education. The tool upgrades trend-following setups by combining structure with automatic price action insights.
Este indicador combina médias móveis (EMAs de 20/50/100/200 e SMA 200) com detecção de engolfo de alta/baixa, colorindo o candle automaticamente: engolfo de alta com verde escuro, engolfo de baixa com vermelho destacado. Inclui alertas automáticos para ambos os padrões, perfeito para análise visual, estratégia, ou ensino.
