开始

Trailing-stop

ATR/Structure Trail Stop Loss This indicator is a high-performance trend-following tool designed to help traders stay in winning positions for maximum "R" gains. It solves the common problem of getting stopped out too early by combining Volatility (ATR) with Market Structure (Price Action Swings). How it Works The script calculates two different stop-loss levels and automatically chooses the most "conservative" one to protect your capital: ATR Stop: Measures the current market volatility. If the market gets wild, the stop widens. If the market gets calm, the stop tightens. Structure Stop: Looks at the lowest lows (for Longs) or highest highs (for Shorts) of the last few candles. This ensures you don't stay in a trade if the actual price trend breaks. Key Features Hybrid Logic: The stop strictly follows Closing Prices to prevent "wick-outs" from temporary spikes. Trend Dashboard: A real-time table tracks ADX (Trend Power). "RUN IT": High momentum; keep trailing for 12R–30R targets. "TIGHTEN": Momentum is dying; consider locking in profits. Visual Diamonds: Uses a Step-Line style with diamonds to show exactly when your stop-loss "locks in" a new level. How to Use It (Step-by-Step) Entry: Enter your trade based on your standard breakout strategy. Initial Risk: Use the Initial Stop (5 points) until the price moves in your favor. The Trail: Once the trend establishes, follow the Light White Diamonds. Scaling: Use the ATR Multiplier input to adjust the "breathing room." Lower Multiplier (e.g., 1.5): Tighter trail, good for scalp targets. Higher Multiplier (e.g., 2.5+): Wider trail, best for catching 30R monster moves. Exit: Close the position immediately when a candle closes on the opposite side of the diamonds.
Pine Script®指标
由khaieconomic提供
EDUVEST UTBOT ADJ - Adaptive ATR Trailing StopEDUVEST UTBOT ADJ - Adaptive ATR Trailing Stop with Session-Based Sensitivity ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ ORIGINALITY This indicator is an enhanced version of the classic UT Bot concept, featuring automatic session-based ATR sensitivity adjustment. Unlike the original UT Bot which uses a fixed sensitivity value, this version dynamically adapts to different trading sessions (Tokyo, London, New York) and automatically detects asset characteristics to optimize signal generation. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ WHAT IT DOES - Generates BUY and SELL signals based on ATR trailing stop crossovers with a moving average - Automatically adjusts sensitivity based on current trading session (Tokyo/London/NY) - Auto-detects asset type and applies optimized parameters for each instrument - Displays real-time session information and volatility status - Provides alert functionality with customizable cooldown periods ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ HOW IT WORKS 【Core Logic: ATR Trailing Stop】 The indicator calculates an ATR-based trailing stop using the formula: Trailing Stop = Price ± (Sensitivity × ATR) When price is above the trailing stop and rising, the stop trails below price. When price is below the trailing stop and falling, the stop trails above price. 【Signal Generation】 - BUY Signal: Price crosses above the trailing stop AND Moving Average crosses above the trailing stop - SELL Signal: Price crosses below the trailing stop AND Moving Average crosses below the trailing stop 【Session-Based Sensitivity Adjustment】 The indicator adjusts ATR sensitivity based on trading session (JST timezone): - Tokyo (08:00-15:00): Lower sensitivity (reduced by adjustment value) - typically quieter markets - London (15:00-23:00): Base sensitivity - moderate volatility - New York (23:00-08:00): Higher sensitivity (increased by adjustment value) - higher volatility 【Dynamic ATR Adjustment】 When enabled, the indicator compares current ATR to its smoothed average: - ATR Ratio = Current ATR / SMA(ATR, smoothing period) - Volatility Multiplier = 1.0 + (Sensitivity × (2.0 - ATR Ratio)) This reduces sensitivity during high volatility (fewer false signals) and increases sensitivity during low volatility (faster response). 【Auto Asset Detection】 The indicator automatically detects the traded instrument and applies optimized parameters: - Stable pairs (USDJPY, EURUSD, USDCHF): Base sensitivity 1.5-1.8 - Moderate pairs (AUDUSD, USDCAD, EURJPY): Base sensitivity 2.0-2.3 - Volatile pairs (GBPUSD): Base sensitivity 2.8 - Commodities (GOLD/XAUUSD): Base sensitivity 3.5 - Indices (NASDAQ/NAS100): Base sensitivity 4.0 ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ HOW TO USE 【Recommended Settings】 - Timeframe: 15 minutes or higher (15M, 1H, 4H recommended) - Best performance on: Forex majors, Gold, NASDAQ - Enable "Auto Asset Detection" for optimized parameters 【Entry Rules】 - BUY: Enter long when green BUY label appears - SELL: Enter short when pink SELL label appears 【Session Panel】 The top-right panel displays: - Current trading session (Tokyo/London/NY) - Volatility status (High Chance/Medium Chance/Caution) - Mode (AUTO/MANUAL) 【Alert Setup】 1. Enable "Viewer Alert Display" in settings 2. Set cooldown period (default: 15 minutes) to avoid signal spam 3. Create alert with "Any alert() function call" condition 【Important Notes】 - This indicator does not repaint - signals are confirmed at bar close - Lower timeframes (1M, 5M) may generate excessive signals - Always use proper risk management and confirm with other analysis ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ SETTINGS OVERVIEW 🎯 Alert Settings - Viewer Alert Display: Enable/disable alert labels - Cooldown Function: Prevent rapid consecutive signals - Cooldown Time: Minutes between alerts (5-60) 🔧 Dynamic ATR Settings - Enable Dynamic ATR: Auto-adjust based on volatility - ATR Period: Calculation period (default: 14) - ATR Smoothing: Smoothing period for ratio calculation - Volatility Sensitivity: How much to adjust (0.1-1.0) 🕐 Session ATR Adjustment - Enable Time Adjustment: Session-based sensitivity - Show Session Info: Display session panel 📊 Asset Settings - Auto Asset Detection: Automatically optimize for instrument - Manual settings available when auto-detection is disabled ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ █ CREDITS Based on the original UT Bot concept by QuantNomad. Enhanced with session-based adaptation and auto-asset detection by EduVest. License: Mozilla Public License 2.0
Pine Script®指标
由EduVest_doro提供
MDZ Strategy v4.2 - Multi-factor trend strategyWhat This Strategy Does MDZ (Momentum Divergence Zones) v4.2 is a trend-following strategy that enters long positions when multiple momentum and trend indicators align. It's designed for swing trading on higher timeframes (2H-4H) and uses ATR-based position management. The strategy waits for strong trend confirmation before entry, requiring agreement across five different filters. This reduces trade frequency but aims to improve signal quality. Entry Logic A long entry triggers when ALL of the following conditions are true: 1. EMA Stack (Trend Structure) Price > EMA 20 > EMA 50 > EMA 200 This "stacked" alignment indicates a strong established uptrend 2. RSI Filter (Momentum Window) RSI between 45-75 (default) Confirms momentum without entering overbought territory 3. ADX Filter (Trend Strength) ADX > 20 (default) Ensures the trend has sufficient strength, not a ranging market 4. MACD Confirmation MACD line above signal line Histogram increasing (momentum accelerating) 5. Directional Movement +DI > -DI Confirms bullish directional pressure Exit Logic Positions are managed with ATR-based levels: ParameterDefaultDescriptionStop Loss2.5 × ATRBelow entry priceTake Profit6.0 × ATRAbove entry priceTrailing Stop2.0 × ATROptional, activates after entry The default configuration produces a 1:2.4 risk-reward ratio. Presets The strategy includes optimized presets based on historical testing: PresetTimeframeNotes1H Standard1 HourMore frequent signals2H Low DD2 HourConservative settings3H Optimized3 HourBalanced approach4H Swing4 HourWider stops for swing tradesCustomAnyFull manual control Select "Custom" to adjust all parameters manually. Inputs Explained EMAs Fast EMA (20): Short-term trend Slow EMA (50): Medium-term trend Trend EMA (200): Long-term trend filter RSI Length: Lookback period (default 14) Min/Max: Entry window to avoid extremes ADX Min ADX: Minimum trend strength threshold Risk Stop Loss ATR: Multiplier for stop distance Take Profit ATR: Multiplier for target distance Trail ATR: Trailing stop distance (if enabled) Session (Optional) Filter entries by time of day Recommended OFF for 3H+ timeframes What's Displayed Info Panel (Top Right) Current preset Trend status (Strong/Wait) ADX, RSI, MACD readings Position status Risk-reward ratio Stats Panel (Top Left) Net P&L % Total trades Win rate Profit factor Maximum drawdown Chart EMA lines (20 blue, 50 orange, 200 purple) Green background during strong uptrend Triangle markers on entry signals Important Notes ⚠️ This is a long-only strategy. It does not take short positions. ⚠️ Historical results do not guarantee future performance. Backtests show what would have happened in the past under specific conditions. Markets change, and any strategy can experience drawdowns or extended losing periods. ⚠️ Risk management is your responsibility. The default settings risk 100% of equity per trade for backtesting purposes. In live trading, appropriate position sizing based on your risk tolerance is essential. ⚠️ Slippage and commissions matter. The backtest includes 0.02% commission and 1 tick slippage, but actual execution costs vary by broker and market conditions. Best Practices Test on your specific market — Results vary significantly across different instruments Use appropriate position sizing — Never risk more than you can afford to lose Combine with your own analysis — No indicator replaces understanding market context Paper trade first — Validate the strategy matches your trading style before risking capital Alerts Two alerts are available: MDZ Long Entry: Fires when all entry conditions are met Uptrend Started: Fires when EMA stack first aligns bullish Methodology This strategy is based on the principle that trend continuation has better odds than reversal when multiple timeframe momentum indicators agree. By requiring five independent confirmations, it filters out weak setups at the cost of fewer total signals. The ATR-based exits adapt to current volatility rather than using fixed pip/point targets, which helps the strategy adjust to different market conditions. Questions? Leave a comment below.
Pine Script®策略
由VolForge提供
Fibonacci-Only StrategyFibonacci-Only Strategy This script is a custom trading strategy designed for traders who leverage Fibonacci retracement levels to identify potential trade entries and exits. The strategy is versatile, allowing users to trade across multiple timeframes, with built-in options for dynamic stop loss, trailing stops, and take profit levels. Key Features: Custom Fibonacci Levels: This strategy calculates three specific Fibonacci retracement levels: 19%, 82.56%, and the reverse 19% level. These levels are used to identify potential areas of support and resistance where price reversals or breaks might occur. The Fibonacci levels are calculated based on the highest and lowest prices within a 100-bar period, making them dynamic and responsive to recent market conditions. Dynamic Entry Conditions: Touch Entry: The script enters long or short positions when the price touches specific Fibonacci levels and confirms the move with a bullish (for long) or bearish (for short) candle. Break Entry (Optional): If the "Use Break Strategy" option is enabled, the script can also enter positions when the price breaks through Fibonacci levels, providing more aggressive entry opportunities. Stop Loss Management: The script offers flexible stop loss settings. Users can choose between a fixed percentage stop loss or an ATR-based stop loss, which adjusts based on market volatility. The ATR (Average True Range) stop loss is multiplied by a user-defined factor, allowing for tailored risk management based on market conditions. Trailing Stop Mechanism: The script includes an optional trailing stop feature, which adjusts the stop loss level as the market moves in favor of the trade. This helps lock in profits while allowing the trade to run if the trend continues. The trailing stop is calculated as a percentage of the difference between the entry price and the current market price. Multiple Take Profit Levels: The strategy calculates seven take profit levels, each at incremental percentages above (for long trades) or below (for short trades) the entry price. This allows for gradual profit-taking as the market moves in the trade's favor. Each take profit level can be customized in terms of the percentage of the position to be closed, providing precise control over exit strategies. Strategy Backtesting and Results: Realistic Backtesting: The script has been backtested with realistic account sizes, commission rates, and slippage settings to ensure that the results are applicable to actual trading scenarios. The backtesting covers various timeframes and markets to ensure the strategy's robustness across different trading environments. Default Settings: The script is published with default settings that have been optimized for general use. These settings include a 15-minute timeframe, a 1.0% stop loss, a 2.0 ATR multiplier for stop loss, and a 1.5% trailing stop. Users can adjust these settings to better fit their specific trading style or the market they are trading. How It Works: Long Entry Conditions: The strategy enters a long position when the price touches the 19% Fibonacci level (from high to low) or the reverse 19% level (from low to high) and confirms the move with a bullish candle. If the "Use Break Strategy" option is enabled, the script will also enter a long position when the price breaks below the 19% Fibonacci level and then moves back up, confirming the break with a bullish candle. Short Entry Conditions: The strategy enters a short position when the price touches the 82.56% Fibonacci level and confirms the move with a bearish candle. If the "Use Break Strategy" option is enabled, the script will also enter a short position when the price breaks above the 82.56% Fibonacci level and then moves back down, confirming the break with a bearish candle. Stop Loss and Take Profit Logic: The stop loss for each trade is calculated based on the selected method (fixed percentage or ATR-based). The strategy then manages the trade by either trailing the stop or taking profit at predefined levels. The take profit levels are set at increments of 0.5% above or below the entry price, depending on whether the position is long or short. The script gradually exits the trade as these levels are hit, securing profits while minimizing risk. Usage: For Fibonacci Traders: This script is ideal for traders who rely on Fibonacci retracement levels to find potential trade entries and exits. The script automates the process, allowing traders to focus on market analysis and decision-making. For Trend and Swing Traders: The strategy's flexibility in handling both touch and break entries makes it suitable for trend-following and swing trading strategies. The multiple take profit levels allow traders to capture profits in trending markets while managing risk. Important Notes: Originality: This script uniquely combines Fibonacci retracement levels with dynamic stop loss management and multiple take profit levels. It is not just a combination of existing indicators but a thoughtful integration designed to enhance trading performance. Disclaimer: Trading involves risk, and it is crucial to test this script in a demo account or through backtesting before applying it to live trading. Users should ensure that the settings align with their individual risk tolerance and trading strategy.
Pine Script®策略
由Kinji213提供
3
Pure Morning 2.0 - Candlestick Pattern Doji StrategyThe new "Pure Morning 2.0 - Candlestick Pattern Doji Strategy" is a trend-following, intraday cryptocurrency trading system authored by devil_machine. The system identifies Doji and Morning Doji Star candlestick formations above the EMA60 as entry points for long trades. For best results we recommend to use on 15-minute, 30-minute, or 1-hour timeframes, and are ideal for high-volatility markets. The strategy also utilizes a profit target or trailing stop for exits, with stop loss set at the lowest low of the last 100 candles. The strategy's configuration details, such as Doji tolerance, and exit configurations are adjustable. In this new version 2.0, we've incorporated a new selectable filter. Since the stop loss is set at the lowest low, this filter ensures that this value isn't too far from the entry price, thereby optimizing the Risk-Reward ratio. In the specific case of ALPINE, a 9% Take-Profit and and Stop-Loss at Lowest Low of the last 100 candles were set, with an activated trailing-stop percentage, Max Loss Filter is not active. Name : Pure Morning 2.0 - Candlestick Pattern Doji Strategy Author : @devil_machine Category : Trend Follower based on candlestick patterns. Operating mode : Spot or Futures (only long). Trades duration : Intraday Timeframe : 15m, 30m, 1H Market : Crypto Suggested usage : Short-term trading, when the market is in trend and it is showing high volatility . Entry : When a Doji or Morning Doji Star formation occurs above the EMA60. Exit : Profit target or Trailing stop, Stop loss on the lowest low of the last 100 candles. Configuration : - Doji Settings (tolerances) for Entry Condition - Max Loss Filter (Lowest Low filter) - Exit Long configuration - Trailing stop Backtesting : ⁃ Exchange: BINANCE ⁃ Pair: ALPINEUSDT ⁃ Timeframe: 30m ⁃ Fee: 0.075% ⁃ Slippage: 1 - Initial Capital: 10000 USDT - Position sizing: 10% of Equity - Start: 2022-02-28 (Out Of Sample from 2022-12-23) - Bar magnifier: on Disclaimer : Risk Management is crucial, so adjust stop loss to your comfort level. A tight stop loss can help minimise potential losses. Use at your own risk. How you or we can improve? Source code is open so share your ideas! Leave a comment and smash the boost button! Thanks for your attention, happy to support the TradingView community.
Pine Script®策略
由TheSocialCryptoClub提供
6
Bollinger Bands - Breakout StrategyThe Bollinger Bands - Breakout Strategy is a trend-following optimized for short-term trading in the crypto market. This strategy employs the Bollinger Bands, a widely recognized technical indicator, as its primary instrument for pinpointing potential trades. It is capable of executing both long and short positions, depending on whether the market is in a spot or futures, and is particularly effective in trending markets. The strategy boasts a high degree of configurability, allowing users to set the Bollinger Bands period and deviation, trend filter, volatility filter, trade direction filter, rate of change filter, and date filter. Furthermore, it offers options for Take Profit, Stop Loss, and Trailing Stop for both long and short positions, ensuring a comprehensive risk management approach. The inclusion of a maximum intraday loss feature adds another layer of protection, making this strategy a valuable tool for traders seeking a professional and adaptable trading system. Name : Bollinger Bands - Breakout Strategy Category : Trend Follower based on Bollinger Bands Operating mode : Long and Short on Futures or Long on Spot Trade duration : Intraday Timeframe : 2H, 3H, 4H, 5H Market : Crypto Suggested usage : Trending Markets Entry : When the price crosses above or below the Bollinger Bands Exit : Opposite Cross or Profit target, Trailing stop or Stop loss Configuration : - Bollinger Bands period and deviation - Trend Filter - Volatility Filter - Trade direction filter - Rate of Change filter - Date Filter (for backtesting purposes) - Take Profit, Stop Loss and Trailing Stop for long and short positions - Risk Management: Max Intraday Loss Backtesting : ⁃ Exchange: BINANCE ⁃ Pair: BTCUSDT.P ⁃ Timeframe: 4H ⁃ Fee: 0.025% ⁃ Slippage: 1 - Initial Capital: 10000 USDT - Position sizing: 10% of Equity - Start : 2019-09-19 (Out Of Sample from 2022-12-23) - Bar magnifier: on Credits : - LucF of Pine Coders for f_security function to avoid repainting using security. - QuantNomad for Monthly Table. Disclaimer : Risk Management is crucial, so adjust stop loss to your comfort level. A tight stop loss can help minimise potential losses. Use at your own risk. How you or we can improve? Source code is open so share your ideas! Leave a comment and smash the boost button! Thanks for your attention, happy to support the TradingView community.
Pine Script®策略
由TheSocialCryptoClub提供
7
TrailingStopsLibrary "TrailingStops" This library contains functions to output trailing stop lines. f_marketStructureStop(_restartMode, _flipMode, _restartLowIn, _restartHighIn)   Parameters:      _restartMode - Defines how the stop lines persist. Allowed values are: "Always On" - The stop lines are always present and they just reset when they're crossed. "Flip" - The stop lines flip when they're crossed. "Manual" - The stop lines turn off when they're crossed, and turn back on again when _restartLowIn or _restartHighIn are passed into the function as true.      _flipMode - Defines whether the stop lines are broken by wicks or closes. Allowed values are "Wick", and "Close".      _restartLowIn - If _restartMode is "Manual", passing this parameter as true restarts the Low stop line.      _restartHighIn - If _restartMode is "Manual", passing this parameter as true restarts the High stop line. @returns - floats for the Low and High stop line.
Pine Script®库
由SimpleCryptoLife提供
8
Wilder's Volatility Trailing Stop Strategy with various MA'sFor Educational Purposes. Results can differ on different markets and can fail at any time. Profit is not guaranteed. This only works in a few markets and in certain situations. Changing the settings can give better or worse results for other markets. This strategy is based on Wilder's Volatility System. It is an ATR trailing stop that is used for long term trends. This strategy focuses on the trailing stop alone and goes long and short only when it goes above or below the trailing line. It is similar to Donchian channels except it does not include the certain period channel breakout, only the trailing signal. This is only the trailing stop and an attempt to show how well it works standalone as Wilder described. In his book, Wilder recommends a multiplier of 2.8-3.1 and an ATR lookback of 7 periods along with a running moving average or otherwise known as Wilder's moving average. The calculation and programming part for the trailing stop varies everywhere. I opted to keep it as simple and accurate as I could think of and interpret from the book. The variations to these types of indicators are numerous unfortunately, but Wilder seems to be the original author of ATR and this ATR-based trailing stop. In his book he says to use the significant closing price or highest/lowest closing price for the calculation part but I also included the option of choosing the highest high and lowest low, and the option to choose various moving averages in case anyone wants to experiment. Comparing this and Donchian channels, it seems that a 2.5 multiplier is somewhat similar to the middle band of DCs and a 3.0 multiplier is somewhat similar to a double length middle band of DCs. It's hard to say which is the better trailing stop for a long term strategy. It's hard to beat the simplicity of DCs but maybe some might find a need for more inputs in a trailing stop or maybe an ATR based one like Wilder's can work better depending on what setting or strategy it's used in.
Pine Script®策略
由SparkyFlary提供
ATR Trailing Stop Strategy by ceyhunSame coding only coloring and strategy version added //Barcolor Green = Trail1 > Trail2 and close > Trail2 and low > Trail2 Blue = Trail1 > Trail2 and close > Trail2 and low < Trail2 Red = Trail2 > Trail1 and close < Trail2 and high < Trail2 Yellow = Trail2 > Trail1 and close < Trail2 and high > Trail2 //It gives White color where there is deterioration. Let's not use InfoPanel in strategy, it would be wrong as it signals the next day.
Pine Script®策略
由ceyhun提供
23
ATR Trailing Stop by ceyhunSame coding only coloring and information panel was added. CDC ATR Trailing Stop V2.1 (2013) //Barcolor Green = Trail1 > Trail2 and close > Trail2 and low > Trail2 Blue = Trail1 > Trail2 and close > Trail2 and low < Trail2 Red = Trail2 > Trail1 and close < Trail2 and high < Trail2 Yellow = Trail2 > Trail1 and close < Trail2 and high > Trail2 //It gives White color where there is deterioration. //InfoPanel Buy Price = Blue draws the circles at the purchase price. Profit Long>20 = Risk level taken as a percentage, I got the highest 20%, you can determine as you wish. Sell Price = Red draws the circles at the purchase price. Profit Short>20 = Risk level taken as a percentage, I got the highest 20%, you can determine as you wish.
Pine Script®指标
由ceyhun提供
52
Percent Trailing Stop (%) - For Study Scripts=========== Percent Trailing Stop (%) - { FOR STUDY SCRIPTS } =========== Wow - this is an example of how to implement Alerts relating to a Trailing Stop (%) within your Study Script. It's taken a bit of effort to get this working but I think we got there! Alerts include Open Long/Short, Trailing Stop Hit, and (the most important one) Movement of Trailing Stop! <- this is actually really quite good, by the way! :) You can ignore the actual entry/exit orders - they're based on a simple MA cross and are therefore NOT relevant, NOT profitable and NOT recommended! You should be using this code as a way of adding a Trailing Stop to your own scripts - hope it helps! Set your "Open Long/Short" Alert to "Once per Bar Close" - Set your "Trailing Stop Hit" Alert to "Once per Bar" - Set your "Move TSL" Alert to "Once per Bar Close". - You're all done! Enjoy. ----------- Good Luck and Happy Trading!
Pine Script®指标
由theCrypster提供
11
Percent Trailing Stop %=========== Percent Trailing Stop % =========== Another Stop Loss Indicator today - our last Fixed SL/TP script went down quite well, this one is for adding a Percent Trailing Stop from Entry Price to your own strategy. You can ignore the actual entry/exit orders - they're based on a simple MA cross and are therefore NOT relevant, NOT profitable and NOT recommended! You should be using this code as a way of adding a % Trailing Stop to your own scripts - hope it helps! You should also notice that a generally considered losing strategy (a simple MA cross) could actually become profitable with careful money management - try combining this Trailing Stop script with our Fixed Stop/Take Profit script for really accurate management of your capital. ----------- Good Luck and Happy Trading!
Pine Script®策略
由theCrypster提供
7