开始

成交量

Delta/Volume Bubble Signals [Quant Z-Score] Maxxed Version Delta/Volume Bubble Signals Maxxed Verison This indicator combines advanced volume delta analysis with smart filtering to generate high-conviction intraday signals on futures like YM, ES, and NQ (5-minute charts perform particularly well in testing). Special thanks to L&L Capital for the LNL Trend System, which provides the excellent dynamic chop detection and cloud visuals used here. A very BIG thanks to tncylyv for the original volume delta bubble script — its Z-score normalization on extreme volume/delta is the foundation of the core detection logic.This entire system is now possible thanks to TradingView's addition of Volume Delta data in the Footprint chart, allowing accurate lower-timeframe delta aggregation without external feeds. Core Concept the indicator identifies extreme volume/delta spikes — moments when significant buying or selling pressure appears — and only signals when multiple confluence filters align. This results in lower-frequency, higher-quality trades that aim to capture institutional momentum while avoiding noise. How It Works — Key Components Volume Delta Detection (The Heart of the System) Uses TradingView's built-in footprint delta (aggregated from lower TF, default 1-second bars). Calculates absolute delta and applies a rolling Z-score (default lookback 60 bars) to normalize extremes across different volatility regimes and instruments. Bubbles visualize spikes above threshold (default 1.7σ). BUY/SELL signals require the same threshold plus additional filters. Absorption Filter (Enabled by Default) Detects high volume/delta with minimal price movement ("effort vs result" failure = trapped traders). Purple glow on bubbles + optional alert. Signals are suppressed on absorption bars to avoid counter-trend traps. Trend Filter (Nadaraya-Watson from jdehorty as default) Non-repainting kernel regression line for smooth, adaptive trend following. Signals only fire when price is on the correct side of the trend line (above for longs, below for shorts). Can be disabled or switched to EMA/WMA/KAMA. LNL Chop Filter (Tight Mode by Default) Dynamic ATR-based stop zones from L&L's system. When stop levels appear on both sides of price = sideways/chop (no-go zone). Signals completely suppressed during chop. Signals & Visuals BUY: Small blue "BUY" label below bar. SELL: Small red "SELL" label above bar. CLOSE LONG: Tiny dark grey "CLOSE" label above bar (on opposite SELL signal or stop hit). CLOSE SHORT: Tiny dark grey "CLOSE" label below bar (on opposite BUY signal or stop hit). No overlap — closes only appear on actual exit/reversal bars. Alerts (Fully Separate)Individual toggles for: BUY Signal SELL Signal CLOSE LONG (opposite SELL) CLOSE SHORT (opposite BUY) Absorption Detected Unusual Volume/Delta Usage Tips Best on intraday futures (YM 5-min has shown strong results in testing). Defaults are tuned for balance: 1.7σ threshold, Tight LNL mode, absorption on. Strategy version (separate script) adds LNL trailing stops for actual backtesting/exits. Customize freely — try different LNL modes (Net for wider range), trend types, or Z-thresholds. To backtest and optimize using the matching strategy which I created as well. Important: Forward Test Thoroughly This indicator was refined on historical data, so there's always risk of over-fitting. Always forward test on live or paper accounts for weeks/months before real capital: Validate across different market regimes (trending, ranging, high/low volatility). Compare out-of-sample periods. Adjust one parameter at a time and re-validate forward. Markets change — what worked yesterday may need tweaking tomorrow. Feel free to use, modify, and share. Good luck, and trade well! — Max
Pine Script®指标
由Maximilianned提供
Lakshmi - Low Volatility Range Breakout (LVRB)⚡️ Overview The Low Volatility Range Breakout (LVRB) indicator is designed to identify consolidation phases characterized by suppressed volatility and generate actionable signals when price breaks out of these ranges. The underlying premise is rooted in the market principle that periods of low volatility often precede significant directional moves—volatility contraction leads to expansion. Important Note on Optimization: The default parameter settings of this indicator have been specifically optimized for BTCUSDT on the 2-hour (2H) timeframe. While the indicator can be applied to other instruments and timeframes, users are encouraged to adjust the parameters accordingly to suit different trading conditions and asset characteristics. This indicator automates the detection of "quiet" accumulation/distribution zones and provides clear visual cues and alerts when a breakout occurs. ⚡️ How to Use 1. Add the indicator to your chart. Default settings are optimized for BTCUSDT 2H. 2. Wait for a gray box to appear—this indicates a qualified low-volatility range is forming. 3. Monitor for breakout signals: • LONG (green triangle below bar): Price broke above the range. Consider entering a long position. • SHORT (red triangle above bar): Price broke below the range. Consider entering a short position. 4. Set alerts using "LVRB LONG" or "LVRB SHORT" to receive notifications on confirmed breakouts. 5. Adjust parameters as needed for different instruments or timeframes. Tip: Combine with volume analysis or trend filters for higher-probability setups. ⚡️ How It Works 1. Low Volatility Bar Detection A bar is classified as "low volatility" when it meets the following criteria: • True Range (TR) is at or below the average TR (Simple Moving Average) multiplied by a user-defined threshold. • (Optional) Candle Body is at or below the average body size multiplied by a separate threshold. This dual-filter approach helps isolate bars that exhibit genuine compression in both range and directional commitment. 2. Range Box Formation When consecutive low-volatility bars are detected, the indicator begins constructing a consolidation box: • The box expands to encompass the high and low of qualifying bars. • A minimum number of bars and a minimum fraction of low-volatility bars are required for the box to become "qualified" (active). • A configurable tolerance allows for a limited number of consecutive non-low-vol bars within the sequence, accommodating minor noise without invalidating the range. • If the box height exceeds a maximum threshold (defined as a multiple of the base ATR at sequence start), the range is invalidated. 3. Breakout Detection Once a qualified range is established, the indicator monitors for breakouts: • Wick Mode: Requires both a wick pierce beyond the range boundary AND a close outside the range. • Close Mode: Requires only a close beyond the range boundary. • (Optional) Breakout Body Filter: The breakout candle's body must exceed a multiple of the average body size at range formation. • (Optional) Candle Direction Filter: Bullish breakouts require a green candle; bearish breakouts require a red candle. Signals are displayed in real-time and confirmed upon bar close. ⚡️ Inputs & Parameters • Volatility Window: Lookback period for calculating average TR and average body size. • TR Multiplier: A bar's TR must be ≤ avgTR × this value to qualify as low-vol. • Body Multiplier: A bar's body must be ≤ avgBody × this value (if body filter is enabled). • Use Body Filter: Toggle the body size filter on/off. • Min Bars in Box: Minimum number of bars required for a range to become qualified. • Min Low-Vol Fraction: Minimum proportion of bars in the sequence that must be low-vol. • Allowed Consecutive Non-Low-Vol Bars: Tolerance for consecutive bars that do not meet low-vol criteria. • Max Box Height: Maximum allowed range height as a multiple of the base ATR. • Breakout Mode: Choose between "Wick" (pierce + close) or "Close" (close only). • Breakout Body Multiplier: Require breakout candle body ≥ avgBody × this value (1.0 = OFF). • Require Candle Direction: Enforce green candle for LONG, red candle for SHORT. ⚡️ Visual Features • Consolidation Boxes: Displayed in neutral (gray) color during formation. Upon a confirmed breakout, the box is colored green for bullish breakouts or red for bearish breakouts. • Breakout Signals: • LONG: Green upward triangle displayed below the price bar with "LONG" label. • SHORT: Red downward triangle displayed above the price bar with "SHORT" label. • Range Levels: Optional horizontal plots for the active range's high and low. • Invalidated Boxes: Optionally retained in neutral (gray) color or deleted from the chart. • Full Customization: Colors, transparency, and border width are all adjustable. ⚡️ Alerts Two alert conditions are available: • LVRB LONG: Triggered on a confirmed bullish breakout (bar close). • LVRB SHORT: Triggered on a confirmed bearish breakout (bar close). ⚡️ Use Cases • Breakout Trading: Enter positions when price escapes a well-defined low-volatility range. • Volatility Expansion Plays: Anticipate increased volatility following periods of compression. • Filtering Choppy Markets: Avoid trading during extended consolidation; wait for confirmed breakouts. • Multi-Timeframe Analysis: Use on higher timeframes to identify major consolidation zones. ⚡️ Notes • Best used in conjunction with volume analysis, trend context, or support/resistance levels for confirmation. • Performance varies across instruments and timeframes; backtesting and parameter optimization are recommended. ⚡️ Credits Developed by Lakshmi. Inspired by volatility contraction principles and range breakout methodologies. ⚡️ Disclaimer This indicator is provided for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a guarantee of profits. Trading financial instruments involves substantial risk, and you may lose more than your initial investment. Past performance, whether indicated by backtesting or historical analysis, does not guarantee future results. The use of this indicator does not ensure or promise any profits or protection against losses. Users are solely responsible for their own trading decisions and should conduct their own research and/or consult with a qualified financial advisor before making any investment decisions. By using this indicator, you acknowledge and accept that you bear full responsibility for any trading outcomes.
Pine Script®指标
由lakshmivibha提供
21
SEPA Sell Signal IndicatorSEPA Sell Signal Indicator - Documentation Overview A comprehensive exit signal indicator designed to work alongside the main SEPA (Stage, EMA, Price Action) indicator. It detects entry points via SEPA base breakouts and provides intelligent sell signals to protect profits and limit losses. Core Features Entry Detection Automatically detects SEPA base breakout patterns Tracks entry price and calculates swing low reference Monitors position status (LONG/FLAT) 5 Sell Triggers Price < EMA50 (Technical weakness) Protected by EMA10 system (see below) Trend Broken (Price < EMA150 AND EMA200) Major trend reversal signal Not protected - always fires EMA Cross (EMA50 < EMA150) Death cross indicating momentum shift Not protected - always fires Swing Low Broken (Price < Previous Swing Low) Hard stop loss trigger Lookback period: 10 bars (adjustable 5-50) Not protected - always fires Relative Strength Negative (RS vs NIFTY500 < 0) Stock underperforming benchmark index Based on 21-period EMA comparison Not protected - always fires EMA10 Protection System (Refinement Feature) Purpose Prevents premature exits during healthy pullbacks in strong uptrends. Protection Criteria (All must be true) ✅ Stock in uptrend (EMA50 > EMA150 > EMA200) ✅ Price above EMA10 ✅ Price above EMA50 ✅ Only protects Condition 1 (Price < EMA50) Two-Stage Warning System Stage 1: Yellow "CAUTION" Signal Appears when Condition 1 triggers but protection is active Grace period begins (default: 5 bars) Allows time for price to recover Stage 2: Red "SELL" Signal Fires when ANY of these occur: Warning timer expires (5/5 bars) Price drops below EMA10 Price drops below EMA50 Uptrend ends Any other sell condition (2-5) triggers Settings Enable EMA10 Protection: ON/OFF toggle (default: ON) Protection Time Limit: 1-20 bars (default: 5) Visual Elements Chart Signals 🔴 Red Triangle (SELL): Confirmed sell signal - exit position 🟡 Yellow Circle (CAUTION): Warning - monitor closely 🟢 Green Background Tint: Currently in position Information Tables Top Right - Sell Conditions Table Shows real-time status of all 5 conditions ✓ (Green) = Condition NOT met (safe) ✓ (Red) = Condition met (danger) ⚠ (Yellow) = Warning active (monitoring) Displays EMA10 protection status (ON/OFF) Shows warning timer (e.g., "3/5") Bottom Right - Position Details (when in position) Entry price Swing low level Relative strength value (color-coded) Current P&L percentage Bottom Right - Status (when flat) Shows "NO POSITION" Indicates waiting for "BASE BREAKOUT" Alert System Entry Signal: SEPA base breakout detected Warning Alert: Caution - price below EMA50 but protected EMA50 Break: Sell confirmed after protection expires Trend Break: Major reversal - exit immediately EMA Cross: Death cross - exit immediately Swing Low Break: Hard stop - exit immediately RS Negative: Underperformance - exit immediately Configuration Parameters ParameterDefaultRangeDescriptionEMA 10101-50Fast moving average for protectionEMA 50501-200Primary trend indicatorEMA 1501501-300Medium-term trendEMA 2002001-500Long-term trendSwing Low Lookback105-50Bars to find previous swing lowRS EMA215-50Period for relative strength calcBenchmarkCNX500-Index for RS comparisonProtection Time Limit51-20Max bars for warning stateTable Text Size1 (Small)0-40=Tiny, 4=HugeEMA10 ProtectionONON/OFFEnable/disable protection Trading Workflow Entry: Indicator detects SEPA base breakout Monitoring: Track 5 sell conditions in real-time Warning: Yellow CAUTION if minor weakness (Condition 1 only) Grace Period: 5 bars to recover or confirm breakdown Exit: Red SELL signal when conditions confirm weakness Reset: Returns to flat, waits for next base breakout Key Advantages ✅ Selective Protection: Only protects shallow pullbacks, not real breakdowns ✅ Time-Limited: Won't delay exits indefinitely (5-bar max) ✅ Multi-Layered: 5 independent sell conditions ✅ Visual Clarity: Color-coded signals and comprehensive tables ✅ Customizable: All parameters adjustable for your style ✅ Alert System: Never miss a critical signal Philosophy The indicator balances two competing goals: Stay in winning trades during healthy pullbacks Exit quickly when trends genuinely reverse The refined EMA10 protection system achieves this by giving breathing room for minor dips while ensuring swift exits on confirmed weakness.
Pine Script®指标
由AzeezF提供
Dow Theory Cockpit1. Evolution History The system has reached its final form through five distinct development phases: Phase 1: Logic Development (V1–V6) Established four core logics: BREAK and DIP (Dow Theory), SNIPER (Reversal), and PUSH (Trend continuation). Implemented the Multi-Timeframe (MTF) panel and Market Scanner. Phase 2: Strategy Transition (V7–V9) Integrated backtesting features, but found the Pine Script calculation load too heavy for real-time charting. Phase 3: Optimization & Performance (V10–V11) Prioritized smooth real-time execution by returning to a lightweight indicator format. Introduced the on-chart stats panel for Win Rate and P&L tracking. Phase 4: Visual Completion (V12–V13) High-Vis Fib: Bold orange lines highlighting the Golden Zone (38.2%/61.8%). Visual Zones: Introduced Green and Red bands for intuitive trade tracking. Phase 5: Smart Adjust Implementation (V14 - Current) Barrier Avoidance: Automatically detects nearby Support/Resistance boxes and shortens the TP to secure profits before a potential reversal. Dynamic RR Optimization: Automatically adjusts the SL in tandem with the shortened TP to maintain a healthy Risk-Reward ratio. 2. Specifications Name: Dow Theory Cockpit Format: Indicator Trading Style: Scalping to Day Trading Timeframes: 5M, 15M (Recommended), 1H Assets: All pairs (Gold, Crypto, Forex, Indices) 3. Features ① Quad-Logic Entry Signals 🎯 SNIPER: Reversal logic targeting "Tops and Bottoms" when the market is overextended. 🌊 DIP: Trend-following logic for "Deep Pullbacks" with clean Moving Average alignment. ⚡ PUSH: Scalping logic for "Shallow Pullbacks" during high-momentum trends. 🚀 BREAK: Classic Dow Theory momentum entry on recent High/Low breakouts. ② Visual Analysis Tools S/R BOX: Displays key price levels as shaded zones to account for market noise and wick volatility. High-Vis Auto Fib: Automatically plots Fibonacci levels, highlighting the Golden Zone with bold lines. ③ Bulletproof Money Management Calculated Lot Size: Displays the precise lot size based on your account balance and Risk % directly on the signal label. TP/SL Zones: Dynamic Green and Red bands show exactly where your profit and loss targets lie. ④ Smart Adjust Function (NEW) Logic: Automatically scans for strong S/R walls near your entry. Normal Condition: Displays TP/SL at your default Risk-Reward ratio. Wall Detected: Automatically pulls the TP to the edge of the barrier and tightens the SL to maintain the ratio. Alert: A "⚠️Adj" warning appears on the label when this adjustment is active. ⑤ Integrated Info Panel Main Panel: Trends across all timeframes, real-time Win Rate, and Period Net P&L. Scanner: Constant monitoring of Gold/JPY/BTC and major US/JP economic data. 4. How to Use Configuration: In the settings under , input your balance and Risk %. Set your start date in . Entry Decision: Wait for the "★ BUY" or "★ SELL" label. "⚠️Adj" displayed: The system has detected a nearby barrier and narrowed the TP/SL for safety. This results in a higher win rate with smaller gains. No warning: No barriers detected. Targets the default wide Risk-Reward ratio. Execution: Enter using the exact Lot size on the label. Set your Limit/Stop orders at the provided TP/SL prices. Exit: The trade concludes when the price reaches the Green or Red zone. Smart Adjust ensures you exit the market before a potential bounce. 1. 大幅なアップデート履歴 (Evolution History) このシステムは、以下の5つのフェーズを経て完成しました。 フェーズ1：ロジック構築期 (V1〜V6) ダウ理論に基づく「BREAK」「DIP」に加え、逆張り「SNIPER」、順張り追撃「PUSH」の4つのロジックを搭載。 マルチタイムフレーム（MTF）パネル、市場監視スキャナーの実装。 フェーズ2：ストラテジー化への挑戦 (V7〜V9) バックテスト機能を搭載したが、Pine Scriptの計算負荷増大によりチャート動作が重くなる問題が発生。 フェーズ3：軽量化と原点回帰 (V10〜V11) **「実戦での快適さ」**を最優先し、indicator 形式へ戻して超軽量化。 期間損益や勝率を、チャート上のパネルで簡易確認できる仕様に変更。 フェーズ4：視認性の完成 (V12〜V13) High-Vis Fib: フィボナッチの重要ライン（38.2%/61.8%）を太いオレンジ実線で強調。 Visual Zone: トレード中、チャート上に「緑（利益）/赤（損失）」の帯を表示し、直感的な判断を可能に。 フェーズ5：スマート・アジャスト実装 (V14 - Current) 障害物回避機能: エントリー方向の直近に「逆側のレジサポBOX（壁）」がある場合、TPをその手前に自動短縮し、反発による含み益消滅リスクを回避。 RR自動最適化: TPの短縮に合わせて、最低限のリスクリワード（RR）を維持するようSLも自動調整する機能を搭載。 2. 全体の仕様 (Specifications) 名称: Dow Theory Cockpit 形式: インジケーター (Indicator) ※TradingViewの「ストラテジーテスター」タブは使用しません。 推奨スタイル: スキャルピング 〜 デイトレード 推奨時間足: 5分足、15分足（推奨）、1時間足 通貨ペア: 全通貨対応（Gold, Crypto, Forex, Index） 3. 特徴と機能 (Features) ① 4つの「高期待値」エントリーロジック 相場の状況に合わせて最適なサインが点灯します。 🎯 SNIPER: 行き過ぎた相場の反転（天底）を狙う逆張り。 🌊 DIP: 移動平均線の並びが良い状態での「深い押し目」を拾う順張り。 ⚡ PUSH: 強いトレンド（ADX上昇中）の「浅い押し目」で飛び乗るスキャルピング用。 🚀 BREAK: ダウ理論の基本、直近高値・安値ブレイクでのエントリー。 ② 視覚的環境認識ツール レジサポ BOX: 重要価格帯を「面（ボックス）」で表示。ヒゲのダマシを許容します。 High-Vis Auto Fib: 直近の波を検知し、38.2%/61.8%（ゴールデンゾーン）を太線で強調表示。 ③ 鉄壁の資金管理 (Money Management) 推奨ロット表示: 口座資金と許容リスク（％）に基づき、適正ロット数を自動計算して表示します。 TP/SL ゾーン: エントリー中、チャート上に「利確までの緑の帯」と「損切までの赤の帯」が表示され、価格の進行度合いが一目で分かります。 ④ スマート・アジャスト機能 (Smart Adjust) ★NEW 機能: エントリー時、目標地点の手前に「強力なレジサポBOX」があるかを自動検知します。 動作: 通常時: 設定通りのRR（2.5倍など）でTP/SLを表示。 壁がある時: **「壁の手前」**にTPを引き下げ、それに合わせてSLも浅く調整します。 表示: 調整が行われた場合、ラベルに 「⚠️Adj（調整済み）」 と警告が出ます。 ⑤ 情報集約パネル Main Panel: 全時間足のトレンド方向、直近の勝率、期間内の純損益を表示。 Scanner: Gold / JPY / BTC の動向と、日米経済指標を常時監視。 4. 使い方 (How to Use) STEP 1: 初期設定 インジケーター設定の 【F. 資金管理】 を開き、口座資金 と リスク(%) を入力します。 【T. バックテスト期間】 で損益計算を開始したい日付を設定します。 STEP 2: エントリー判断 チャートに 「★ BUY」 または 「★ SELL」 のラベルが出現するのを待ちます。 ラベルの確認: 「⚠️Adj」 と出ている場合 → 「近くに壁があるため、TP/SLを狭く調整しました」という意味です。勝率は上がりますが、値幅は小さくなります。 何も出ていない場合 → 「障害物なし。通常のRRで大きく狙います」という意味です。 STEP 3: 注文 (Execution) ラベルの数値を信頼して注文を出します。 Lot: 表示された数量を入力。 TP/SL: 表示された価格に指値・逆指値を置く。 STEP 4: 決済 (Exit) チャート上の 「緑の帯（TP）」 か 「赤の帯（SL）」 にローソク足が到達したら決済です。 **「スマートアジャスト」により、壁の手前で利確設定されているため、「反発して戻ってくる前に逃げ切る」**ことができます。
Pine Script®指标
由Hide_FX_Treader提供
Dow Theory Cockpit [Final Fixed V15]1. Evolution History The system has reached its final form through five distinct development phases: Phase 1: Logic Development (V1–V6) Established four core logics: BREAK and DIP (Dow Theory), SNIPER (Reversal), and PUSH (Trend continuation). Implemented the Multi-Timeframe (MTF) panel and Market Scanner. Phase 2: Strategy Transition (V7–V9) Integrated backtesting features, but found the Pine Script calculation load too heavy for real-time charting. Phase 3: Optimization & Performance (V10–V11) Prioritized smooth real-time execution by returning to a lightweight indicator format. Introduced the on-chart stats panel for Win Rate and P&L tracking. Phase 4: Visual Completion (V12–V13) High-Vis Fib: Bold orange lines highlighting the Golden Zone (38.2%/61.8%). Visual Zones: Introduced Green and Red bands for intuitive trade tracking. Phase 5: Smart Adjust Implementation (V14 - Current) Barrier Avoidance: Automatically detects nearby Support/Resistance boxes and shortens the TP to secure profits before a potential reversal. Dynamic RR Optimization: Automatically adjusts the SL in tandem with the shortened TP to maintain a healthy Risk-Reward ratio. 2. Specifications Name: Dow Theory Cockpit Format: Indicator Trading Style: Scalping to Day Trading Timeframes: 5M, 15M (Recommended), 1H Assets: All pairs (Gold, Crypto, Forex, Indices) 3. Features ① Quad-Logic Entry Signals 🎯 SNIPER: Reversal logic targeting "Tops and Bottoms" when the market is overextended. 🌊 DIP: Trend-following logic for "Deep Pullbacks" with clean Moving Average alignment. ⚡ PUSH: Scalping logic for "Shallow Pullbacks" during high-momentum trends. 🚀 BREAK: Classic Dow Theory momentum entry on recent High/Low breakouts. ② Visual Analysis Tools S/R BOX: Displays key price levels as shaded zones to account for market noise and wick volatility. High-Vis Auto Fib: Automatically plots Fibonacci levels, highlighting the Golden Zone with bold lines. ③ Bulletproof Money Management Calculated Lot Size: Displays the precise lot size based on your account balance and Risk % directly on the signal label. TP/SL Zones: Dynamic Green and Red bands show exactly where your profit and loss targets lie. ④ Smart Adjust Function (NEW) Logic: Automatically scans for strong S/R walls near your entry. Normal Condition: Displays TP/SL at your default Risk-Reward ratio. Wall Detected: Automatically pulls the TP to the edge of the barrier and tightens the SL to maintain the ratio. Alert: A "⚠️Adj" warning appears on the label when this adjustment is active. ⑤ Integrated Info Panel Main Panel: Trends across all timeframes, real-time Win Rate, and Period Net P&L. Scanner: Constant monitoring of Gold/JPY/BTC and major US/JP economic data. 4. How to Use Configuration: In the settings under , input your balance and Risk %. Set your start date in . Entry Decision: Wait for the "★ BUY" or "★ SELL" label. "⚠️Adj" displayed: The system has detected a nearby barrier and narrowed the TP/SL for safety. This results in a higher win rate with smaller gains. No warning: No barriers detected. Targets the default wide Risk-Reward ratio. Execution: Enter using the exact Lot size on the label. Set your Limit/Stop orders at the provided TP/SL prices. Exit: The trade concludes when the price reaches the Green or Red zone. Smart Adjust ensures you exit the market before a potential bounce. 1. 大幅なアップデート履歴 (Evolution History) このシステムは、以下の5つのフェーズを経て完成しました。 フェーズ1：ロジック構築期 (V1〜V6) ダウ理論に基づく「BREAK」「DIP」に加え、逆張り「SNIPER」、順張り追撃「PUSH」の4つのロジックを搭載。 マルチタイムフレーム（MTF）パネル、市場監視スキャナーの実装。 フェーズ2：ストラテジー化への挑戦 (V7〜V9) バックテスト機能を搭載したが、Pine Scriptの計算負荷増大によりチャート動作が重くなる問題が発生。 フェーズ3：軽量化と原点回帰 (V10〜V11) **「実戦での快適さ」**を最優先し、indicator 形式へ戻して超軽量化。 期間損益や勝率を、チャート上のパネルで簡易確認できる仕様に変更。 フェーズ4：視認性の完成 (V12〜V13) High-Vis Fib: フィボナッチの重要ライン（38.2%/61.8%）を太いオレンジ実線で強調。 Visual Zone: トレード中、チャート上に「緑（利益）/赤（損失）」の帯を表示し、直感的な判断を可能に。 フェーズ5：スマート・アジャスト実装 (V14 - Current) 障害物回避機能: エントリー方向の直近に「逆側のレジサポBOX（壁）」がある場合、TPをその手前に自動短縮し、反発による含み益消滅リスクを回避。 RR自動最適化: TPの短縮に合わせて、最低限のリスクリワード（RR）を維持するようSLも自動調整する機能を搭載。 2. 全体の仕様 (Specifications) 名称: Dow Theory Cockpit 形式: インジケーター (Indicator) ※TradingViewの「ストラテジーテスター」タブは使用しません。 推奨スタイル: スキャルピング 〜 デイトレード 推奨時間足: 5分足、15分足（推奨）、1時間足 通貨ペア: 全通貨対応（Gold, Crypto, Forex, Index） 3. 特徴と機能 (Features) ① 4つの「高期待値」エントリーロジック 相場の状況に合わせて最適なサインが点灯します。 🎯 SNIPER: 行き過ぎた相場の反転（天底）を狙う逆張り。 🌊 DIP: 移動平均線の並びが良い状態での「深い押し目」を拾う順張り。 ⚡ PUSH: 強いトレンド（ADX上昇中）の「浅い押し目」で飛び乗るスキャルピング用。 🚀 BREAK: ダウ理論の基本、直近高値・安値ブレイクでのエントリー。 ② 視覚的環境認識ツール レジサポ BOX: 重要価格帯を「面（ボックス）」で表示。ヒゲのダマシを許容します。 High-Vis Auto Fib: 直近の波を検知し、38.2%/61.8%（ゴールデンゾーン）を太線で強調表示。 ③ 鉄壁の資金管理 (Money Management) 推奨ロット表示: 口座資金と許容リスク（％）に基づき、適正ロット数を自動計算して表示します。 TP/SL ゾーン: エントリー中、チャート上に「利確までの緑の帯」と「損切までの赤の帯」が表示され、価格の進行度合いが一目で分かります。 ④ スマート・アジャスト機能 (Smart Adjust) ★NEW 機能: エントリー時、目標地点の手前に「強力なレジサポBOX」があるかを自動検知します。 動作: 通常時: 設定通りのRR（2.5倍など）でTP/SLを表示。 壁がある時: **「壁の手前」**にTPを引き下げ、それに合わせてSLも浅く調整します。 表示: 調整が行われた場合、ラベルに 「⚠️Adj（調整済み）」 と警告が出ます。 ⑤ 情報集約パネル Main Panel: 全時間足のトレンド方向、直近の勝率、期間内の純損益を表示。 Scanner: Gold / JPY / BTC の動向と、日米経済指標を常時監視。 4. 使い方 (How to Use) STEP 1: 初期設定 インジケーター設定の 【F. 資金管理】 を開き、口座資金 と リスク(%) を入力します。 【T. バックテスト期間】 で損益計算を開始したい日付を設定します。 STEP 2: エントリー判断 チャートに 「★ BUY」 または 「★ SELL」 のラベルが出現するのを待ちます。 ラベルの確認: 「⚠️Adj」 と出ている場合 → 「近くに壁があるため、TP/SLを狭く調整しました」という意味です。勝率は上がりますが、値幅は小さくなります。 何も出ていない場合 → 「障害物なし。通常のRRで大きく狙います」という意味です。 STEP 3: 注文 (Execution) ラベルの数値を信頼して注文を出します。 Lot: 表示された数量を入力。 TP/SL: 表示された価格に指値・逆指値を置く。 STEP 4: 決済 (Exit) チャート上の 「緑の帯（TP）」 か 「赤の帯（SL）」 にローソク足が到達したら決済です。 **「スマートアジャスト」により、壁の手前で利確設定されているため、「反発して戻ってくる前に逃げ切る」**ことができます。
Pine Script®指标
由Hide_FX_Treader提供
Virgin-VWAPThis draws the Virgin levels of VWAP. It gives a visual representation of Volume-Weighted Gap Map. Visual "Fill": It looks like a "Gap Fill" indicator. The lines will look like rectangles or "beams" shooting across the chart, stopping exactly where the market "filled" that price level. Trimmed lines: The virgin line gets trimmed once touched. This tells you: "This level was hit, it might still be support/resistance, but the 'Virgin' status is gone." Terminal Labels: A vigin vwap lines carries the price label so ones can see the strike's value at a glance. Clean Forward Space: Because the lines stop when touched, your "future" chart (the empty space to the right) won't be cluttered with old lines that are no longer relevant. You will only see the lines for levels that haven't been hit yet extending into the empty space. Was built for NSE options in mind, seeing those "beams" of historical value stop exactly where price met them is a powerful way to visualize where the market has found "fair value" versus where there are still "unfilled orders." PS: Built with Gemini 3!!
Pine Script®指标
由gokoffline提供
Intrabar Volume Flow IntelligenceIntrabar Volume Flow Intelligence: A Comprehensive Analysis: The Intrabar Volume Flow Intelligence indicator represents a sophisticated approach to understanding market dynamics through the lens of volume analysis at a granular, intrabar level. This Pine Script version 5 indicator transcends traditional volume analysis by dissecting price action within individual bars to reveal the true nature of buying and selling pressure that often remains hidden when examining only the external characteristics of completed candlesticks. At its core, this indicator operates on the principle that volume is the fuel that drives price movement, and by understanding where volume is being applied within each bar—whether at higher prices indicating buying pressure or at lower prices indicating selling pressure—traders can gain a significant edge in anticipating future price movements before they become obvious to the broader market. The foundational innovation of this indicator lies in its use of lower timeframe data to analyze what happens inside each bar on your chart timeframe. While most traders see only the open, high, low, and close of a five-minute candle, for example, this indicator requests data from a one-minute timeframe by default to see all the individual one-minute candles that comprise that five-minute bar. This intrabar analysis allows the indicator to calculate a weighted intensity score based on where the price closed within each sub-bar's range. If the close is near the high, that volume is attributed more heavily to buying pressure; if near the low, to selling pressure. This methodology is far more nuanced than simple tick volume analysis or even traditional volume delta calculations because it accounts for the actual price behavior and distribution of volume throughout the formation of each bar, providing a three-dimensional view of market participation. The intensity calculation itself demonstrates the coding sophistication embedded in this indicator. For each intrabar segment, the indicator calculates a base intensity using the formula of close minus low divided by the range between high and low. This gives a value between zero and one, where values approaching one indicate closes near the high and values approaching zero indicate closes near the low. However, the indicator doesn't stop there—it applies an open adjustment factor that considers the relationship between the close and open positions within the overall range, adding up to twenty percent additional weighting based on directional movement. This adjustment ensures that strongly directional intrabar movement receives appropriate emphasis in the final volume allocation. The adjusted intensity is then bounded between zero and one to prevent extreme outliers from distorting the analysis, demonstrating careful consideration of edge cases and data integrity. The volume flow calculation multiplies this intensity by the actual volume transacted in each intrabar segment, creating buy volume and sell volume figures that represent not just quantity but quality of market participation. These figures are accumulated across all intrabar segments within the parent bar, and simultaneously, a volume-weighted average price is calculated for the entire bar using the typical price of each segment multiplied by its volume. This intrabar VWAP becomes a critical reference point for understanding whether the overall bar is trading above or below its fair value as determined by actual transaction levels. The deviation from this intrabar VWAP is then used as a weighting mechanism—when the close is significantly above the intrabar VWAP, buying volume receives additional weight; when below, selling volume is emphasized. This creates a feedback loop where volume that moves price away from equilibrium is recognized as more significant than volume that keeps price near balance. The imbalance filter represents another layer of analytical sophistication that separates meaningful volume flows from normal market noise. The indicator calculates the absolute difference between buy and sell volume as a percentage of total volume, and this imbalance must exceed a user-defined threshold—defaulted to twenty-five percent but adjustable from five to eighty percent—before the volume flow is considered significant enough to register on the indicator. This filtering mechanism ensures that only bars with clear directional conviction contribute to the cumulative flow measurements, while bars with balanced buying and selling are essentially ignored. This is crucial because markets spend considerable time in equilibrium states where volume is simply facilitating position exchanges without directional intent. By filtering out these neutral periods, the indicator focuses trader attention exclusively on moments when one side of the market is demonstrating clear dominance. The decay factor implementation showcases advanced state management in Pine Script coding. Rather than allowing imbalanced volume to simply disappear after one bar, the indicator maintains decayed values using variable state that persists across bars. When a new significant imbalance occurs, it replaces the decayed value; when no significant imbalance is present, the previous value is multiplied by the decay factor, which defaults to zero point eight-five. This means that a large volume imbalance continues to influence the indicator for several bars afterward, gradually diminishing in impact unless reinforced by new imbalances. This decay mechanism creates persistence in the flow measurements, acknowledging that large institutional volume accumulation or distribution campaigns don't execute in single bars but rather unfold across multiple bars. The cumulative flow calculation then sums these decayed values over a lookback period, creating a running total that represents sustained directional pressure rather than momentary spikes. The dual moving average crossover system applied to these volume flows creates actionable trading signals from the underlying data. The indicator calculates both a fast exponential moving average and a slower simple moving average of the buy flow, sell flow, and net flow values. The use of EMA for the fast line provides responsiveness to recent changes while the SMA for the slow line provides a more stable baseline, and the divergence or convergence between these averages signals shifts in volume flow momentum. When the buy flow EMA crosses above its SMA while volume is elevated, this indicates that buying pressure is not only present but accelerating, which is the foundation for the strong buy signal generation. The same logic applies inversely for selling pressure, creating a symmetrical approach to detecting both upside and downside momentum shifts based on volume characteristics rather than price characteristics. The volume threshold filtering ensures that signals only generate during periods of statistically significant market participation. The indicator calculates a simple moving average of total volume over a user-defined period, defaulted to twenty bars, and then requires that current volume exceed this average by a multiplier, defaulted to one point two times. This ensures that signals occur during periods when the market is actively engaged rather than during quiet periods when a few large orders can create misleading volume patterns. The indicator even distinguishes between high volume—exceeding the threshold—and very high volume—exceeding one point five times the threshold—with the latter triggering background color changes to alert traders to exceptional participation levels. This tiered volume classification allows traders to calibrate their position sizing and conviction levels based on the strength of market participation supporting the signal. The flow momentum calculation adds a velocity dimension to the volume analysis. By calculating the rate of change of the net flow EMA over a user-defined momentum length—defaulted to five bars—the indicator measures not just the direction of volume flow but the acceleration or deceleration of that flow. A positive and increasing flow momentum indicates that buying pressure is not only dominant but intensifying, which typically precedes significant upward price movements. Conversely, negative and decreasing flow momentum suggests selling pressure is building upon itself, often preceding breakdowns. The indicator even calculates a second derivative—the momentum of momentum, termed flow acceleration—which can identify very early turning points when the rate of change itself begins to shift, providing the most forward-looking signal available from this methodology. The divergence detection system represents one of the most powerful features for identifying potential trend reversals and continuations. The indicator maintains separate tracking of price extremes and flow extremes over a lookback period defaulted to fourteen bars. A bearish divergence is identified when price makes a new high or equals the recent high, but the net flow EMA is significantly below its recent high—specifically less than eighty percent of that high—and is declining compared to its value at the divergence lookback distance. This pattern indicates that while price is pushing higher, the volume support for that movement is deteriorating, which frequently precedes reversals. Bullish divergences work inversely, identifying situations where price makes new lows without corresponding weakness in volume flow, suggesting that selling pressure is exhausted and a reversal higher is probable. These divergence signals are plotted as distinct diamond shapes on the indicator, making them visually prominent for trader attention. The accumulation and distribution zone detection provides a longer-term context for understanding institutional positioning. The indicator uses the bars-since function to track consecutive periods where the net flow EMA has remained positive or negative. When buying pressure has persisted for at least five consecutive bars, average intensity exceeds zero point six indicating strong closes within bar ranges, and volume is elevated above the threshold, the indicator identifies an accumulation zone. These zones suggest that smart money is systematically building long positions across multiple bars despite potentially choppy or sideways price action. Distribution zones are identified through the inverse criteria, revealing periods when institutions are systematically exiting or building short positions. These zones are visualized through colored fills on the indicator pane, creating a backdrop that helps traders understand the broader volume flow context beyond individual bar signals. The signal strength scoring system provides a quantitative measure of conviction for each buy or sell signal. Rather than treating all signals as equal, the indicator assigns point values to different signal components: twenty-five points for the buy flow EMA-SMA crossover, twenty-five points for the net flow EMA-SMA crossover, twenty points for high volume presence, fifteen points for positive flow momentum, and fifteen points for bullish divergence presence. These points are summed to create a buy score that can range from zero to one hundred percent, with higher scores indicating that multiple independent confirmation factors are aligned. The same methodology creates a sell score, and these scores are displayed in the information table, allowing traders to quickly assess whether a signal represents a tentative suggestion or a high-conviction setup. This scoring approach transforms the indicator from a binary signal generator into a nuanced probability assessment tool. The visual presentation of the indicator demonstrates exceptional attention to user experience and information density. The primary display shows the net flow EMA as a thick colored line that transitions between green when above zero and above its SMA, indicating strong buying, to a lighter green when above zero but below the SMA, indicating weakening buying, to red when below zero and below the SMA, indicating strong selling, to a lighter red when below zero but above the SMA, indicating weakening selling. This color gradient provides immediate visual feedback about both direction and momentum of volume flows. The net flow SMA is overlaid in orange as a reference line, and a zero line is drawn to clearly delineate positive from negative territory. Behind these lines, a histogram representation of the raw net flow—scaled down by thirty percent for visibility—shows bar-by-bar flow with color intensity reflecting whether flow is strengthening or weakening compared to the previous bar. This layered visualization allows traders to simultaneously see the raw data, the smoothed trend, and the trend of the trend, accommodating both short-term and longer-term trading perspectives. The cumulative delta line adds a macro perspective by maintaining a running sum of all volume deltas divided by one million for scale, plotted in purple as a separate series. This cumulative measure acts similar to an on-balance volume calculation but with the sophisticated volume attribution methodology of this indicator, creating a long-term sentiment gauge that can reveal whether an asset is under sustained accumulation or distribution across days, weeks, or months. Divergences between this cumulative delta and price can identify major trend exhaustion or reversal points that might not be visible in the shorter-term flow measurements. The signal plotting uses shape-based markers rather than background colors or arrows to maximize clarity while preserving chart space. Strong buy signals—meeting multiple criteria including EMA-SMA crossover, high volume, and positive momentum—appear as full-size green triangle-up shapes at the bottom of the indicator pane. Strong sell signals appear as full-size red triangle-down shapes at the top. Regular buy and sell signals that meet fewer criteria appear as smaller, semi-transparent circles, indicating they warrant attention but lack the full confirmation of strong signals. Divergence-based signals appear as distinct diamond shapes in cyan for bullish divergences and orange for bearish divergences, ensuring these critical reversal indicators are immediately recognizable and don't get confused with momentum-based signals. This multi-tiered signal hierarchy helps traders prioritize their analysis and avoid signal overload. The information table in the top-right corner of the indicator pane provides real-time quantitative feedback on all major calculation components. It displays the current bar's buy volume and sell volume in millions with appropriate color coding, the imbalance percentage with color indicating whether it exceeds the threshold, the average intensity score showing whether closes are generally near highs or lows, the flow momentum value, and the current buy and sell scores. This table transforms the indicator from a purely graphical tool into a quantitative dashboard, allowing discretionary traders to incorporate specific numerical thresholds into their decision frameworks. For example, a trader might require that buy score exceed seventy percent and intensity exceed zero point six-five before taking a long position, creating objective entry criteria from subjective chart reading. The background shading that occurs during very high volume periods provides an ambient alert system that doesn't require focused attention on the indicator pane. When volume spikes to one point five times the threshold and net flow EMA is positive, a very light green background appears across the entire indicator pane; when volume spikes with negative net flow, a light red background appears. These backgrounds create a subliminal awareness of exceptional market participation moments, ensuring traders notice when the market is making important decisions even if they're focused on price action or other indicators at that moment. The alert system built into the indicator allows traders to receive notifications for strong buy signals, strong sell signals, bullish divergences, bearish divergences, and very high volume events. These alerts can be configured in TradingView to send push notifications to mobile devices, emails, or webhook calls to automated trading systems. This functionality transforms the indicator from a passive analysis tool into an active monitoring system that can watch markets continuously and notify the trader only when significant volume flow developments occur. For traders monitoring multiple instruments, this alert capability is invaluable for efficient time allocation, allowing them to analyze other opportunities while being instantly notified when this indicator identifies high-probability setups on their watch list. The coding implementation demonstrates advanced Pine Script techniques including the use of request.security_lower_tf to access intrabar data, array manipulation to process variable-length intrabar arrays, proper variable scoping with var keyword for persistent state management across bars, and efficient conditional logic that prevents unnecessary calculations. The code structure with clearly delineated sections for inputs, calculations, signal generation, plotting, and alerts makes it maintainable and educational for those studying Pine Script development. The use of input groups with custom headers creates an organized settings panel that doesn't overwhelm users with dozens of ungrouped parameters, while still providing substantial customization capability for advanced users who want to optimize the indicator for specific instruments or timeframes. For practical trading application, this indicator excels in several specific use cases. Scalpers and day traders can use the intrabar analysis to identify accumulation or distribution happening within the bars of their entry timeframe, providing early entry signals before momentum indicators or price patterns complete. Swing traders can use the cumulative delta and accumulation-distribution zones to understand whether short-term pullbacks in an uptrend are being bought or sold, helping distinguish between healthy retracements and trend reversals. Position traders can use the divergence detection to identify major turning points where price extremes are not supported by volume, providing low-risk entry points for counter-trend positions or warnings to exit with-trend positions before significant reversals. The indicator is particularly valuable in ranging markets where price-based indicators produce numerous false breakout signals. By requiring that breakouts be accompanied by volume flow imbalances, the indicator filters out failed breakouts driven by low participation. When price breaks a range boundary accompanied by a strong buy or sell signal with high buy or sell score and very high volume, the probability of successful breakout follow-through increases dramatically. Conversely, when price breaks a range but the indicator shows low imbalance, opposing flow direction, or low volume, traders can fade the breakout or at minimum avoid chasing it. During trending markets, the indicator helps traders identify the healthiest entry points by revealing where pullbacks are being accumulated by smart money. A trending market will show the cumulative delta continuing in the trend direction even as price pulls back, and accumulation zones will form during these pullbacks. When price resumes the trend, the indicator will generate strong buy or sell signals with high scores, providing objective entry points with clear invalidation levels. The flow momentum component helps traders stay with trends longer by distinguishing between healthy momentum pauses—where momentum goes to zero but doesn't reverse—and actual momentum reversals where opposing pressure is building. The VWAP deviation weighting adds particular value for traders of liquid instruments like major forex pairs, stock indices, and high-volume stocks where VWAP is widely watched by institutional participants. When price deviates significantly from the intrabar VWAP and volume flows in the direction of that deviation with elevated weighting, it indicates that the move away from fair value is being driven by conviction rather than mechanical order flow. This suggests the deviation will likely extend further, creating continuation trading opportunities. Conversely, when price deviates from intrabar VWAP but volume flow shows reduced intensity or opposing direction despite the weighting, it suggests the deviation will revert to VWAP, creating mean reversion opportunities. The ATR normalization option makes the indicator values comparable across different volatility regimes and different instruments. Without normalization, a one-million share buy-sell imbalance might be significant for a low-volatility stock but trivial for a high-volatility cryptocurrency. By normalizing the delta by ATR, the indicator accounts for the typical price movement capacity of the instrument, making signal thresholds and comparison values meaningful across different trading contexts. This is particularly valuable for traders running the indicator on multiple instruments who want consistent signal quality regardless of the underlying instrument characteristics. The configurable decay factor allows traders to adjust how persistent they want volume flows to remain influential. For very short-term scalping, a lower decay factor like zero point five will cause volume imbalances to dissipate quickly, keeping the indicator focused only on very recent flows. For longer-term position trading, a higher decay factor like zero point nine-five will allow significant volume events to influence the indicator for many bars, revealing longer-term accumulation and distribution patterns. This flexibility makes the single indicator adaptable to trading styles ranging from one-minute scalping to daily chart position trading simply by adjusting the decay parameter and the lookback bars. The minimum imbalance percentage setting provides crucial noise filtering that can be optimized per instrument. Highly liquid instruments with tight spreads might show numerous small imbalances that are meaningless, requiring a higher threshold like thirty-five or forty percent to filter noise effectively. Thinly traded instruments might rarely show extreme imbalances, requiring a lower threshold like fifteen or twenty percent to generate adequate signals. By making this threshold user-configurable with a wide range, the indicator accommodates the full spectrum of market microstructure characteristics across different instruments and timeframes. In conclusion, the Intrabar Volume Flow Intelligence indicator represents a comprehensive volume analysis system that combines intrabar data access, sophisticated volume attribution algorithms, multi-timeframe smoothing, statistical filtering, divergence detection, zone identification, and intelligent signal scoring into a cohesive analytical framework. It provides traders with visibility into market dynamics that are invisible to price-only analysis and even to conventional volume analysis, revealing the true intentions of market participants through their actual transaction behavior within each bar. The indicator's strength lies not in any single feature but in the integration of multiple analytical layers that confirm and validate each other, creating high-probability signal generation that can form the foundation of complete trading systems or provide powerful confirmation for discretionary analysis. For traders willing to invest time in understanding its components and optimizing its parameters for their specific instruments and timeframes, this indicator offers a significant informational advantage in increasingly competitive markets where edge is derived from seeing what others miss and acting on that information before it becomes consensus.
Pine Script®指标
由jaydesaigu提供
VSA Effort Result v1.0VSA Effort vs Result by StupidRich Detects volume-spread divergence: - "Er": High volume, narrow spread (absorption) - "eR": Low volume, wide spread (momentum) Features: • Clean text labels (customizable size) • Wide vertical lines matching candle range • Adjustable thresholds & volume SMA • Works on all timeframes/assets Perfect for spotting institutional absorption at key levels. if u wanna buy me a coffee, just dm @stupidrichboy on Telegram hope it help
Pine Script®指标
由dchu3112提供
Order Blocks Volume Delta 3D | Flux ChartsGENERAL OVERVIEW: Order Blocks Volume Delta 3D by Flux Charts is a rule-based order block and volume delta visualization tool. It detects bullish and bearish order blocks using a profile-of-price approach: the indicator finds the most actively traded price area (Point of Control, or POC) between a swing high/low and the Break of Structure (BOS), then anchors the order block to the earliest still-valid candle that traded through that POC band. From there, it tracks all candles that continue to interact with that zone and overlays both 2D and 3D volume delta views directly inside the order block. Unlike traditional order block tools that simply use candle bodies or wicks, this indicator is volume-aware. It lets you optionally pull volume from a lower timeframe feed (for example, using 1-minute data while watching a 5-minute chart) to build a much more accurate picture of how buyers and sellers actually traded inside the zone. This makes every block not just a price box, but a volume story: which side dominated, where, and by how much. All order blocks printed by this indicator are confirmed: BOS and retests are evaluated strictly on closed candles. Nothing is drawn or alerted on partially formed bars, which helps avoid repaint-style flicker and keeps the signals clean and stable. What is the theory behind the indicator?: The core idea behind Order Blocks Volume Delta 3D is that not all price levels inside an order block are equal. Some prices are barely touched, while others act like magnets where candles repeatedly trade and heavy volume passes through. The indicator first finds a swing high or swing low, waits for a clear Break of Structure (BOS), then scans the candles between the swing point and the BOS to find the price level that was touched the most. That level is treated as the POC. From all candles in the swing-to-BOS range that interact with this POC band, the indicator looks for the earliest candle that is not already mitigated and uses that as the anchor candle for the order block: The top of the block equals the anchor candle’s high (for a bearish OB) or the top of its wick zone. The bottom equals the anchor candle’s low (for a bullish OB) or the bottom of its wick zone. This “earliest valid POC-touching candle” rule makes it easier to visualize how price and volume developed from the very start of a meaningful zone, while ignoring POC touches that are already fully mitigated by the time the structure is confirmed. On top of that, each candle is split into bullish and bearish volume. If you choose a lower timeframe volume input, the tool aggregates lower timeframe candles into your chart timeframe, giving a more granular bull-versus-bear breakdown for each bar. The result is an order block that not only shows where price moved but also which side pushed it, how aggressively, and how that balance shifted over time. ORDER BLOCKS VOLUME DELTA 3D FEATURES: The Order Blocks Volume Delta 3D indicator includes 4 main features: 1. Order Blocks 2. Volume Delta 3. 3D Visualization 4. Alerts ORDER BLOCKS: 🔹What is an Order Block An order block is a price zone where a clear displacement move began after liquidity was taken. It usually forms around the last consolidation or cluster of candles before price breaks structure with a strong move. In this indicator, order blocks are defined as structured zones that: Begin at the earliest unmitigated candle that interacted with the most-touched price level (POC) between swing and BOS. Extend through the full wick range of that anchor candle. Stretch forward in time, tracking how price continues to trade through, respect, retest, or invalidate the zone. Are only printed once the BOS is fully confirmed on closed candles (confirmed order blocks only). Example of bullish and bearish order blocks anchored at the earliest unmitigated candle in the POC zone: 🔹How are Order Blocks detected The indicator uses a step-by-step, rules-based process to detect bullish and bearish order blocks. The logic is designed to match discretionary Smart Money concepts but with strict, repeatable rules. Step 1: Detect swing highs and swing lows Swing High: a candle whose high is higher than the highs of surrounding candles. Swing Low: a candle whose low is lower than the lows of surrounding candles. The Swing Length input controls how many candles are checked to the left and right. Example of swing high and swing low detection: Step 2: Confirm Break of Structure (BOS) Once a swing is confirmed, the indicator waits for price to break past that swing: Bullish BOS: price closes above a previous swing high. Bearish BOS: price closes below a previous swing low. To avoid “live” flicker, BOS logic is evaluated based on the previous closed candle. The order block is only confirmed once the BOS candle has fully closed and the next bar has opened. This is one of the reasons the script only shows confirmed, non-repainting order blocks. Example of bullish BOS and bearish BOS: Step 3: Build the POC range between swing and BOS Between the swing candle and the BOS candle, the indicator: Scans all candles in that range. Tracks every price level touched using binning (POC bins). Counts how many times each price band was touched by candle wicks. The bin with the highest touch count becomes the POC band. This is where price traded most often, not necessarily where volume was highest. Example of the POC band between swing and BOS. Step 4 – Anchor the order block to the earliest valid POC candle From all candles in the swing-to-BOS range, the indicator finds the earliest candle whose high/low overlaps the POC band and whose zone is not already mitigated. That candle becomes the anchor candle for the order block: For a bearish OB, the block spans the anchor candle’s full wick range, with its top at the high. For a bullish OB, the block spans the anchor candle’s full wick range, with its bottom at the low. By requiring the anchor to be the earliest unmitigated interaction with POC, the script avoids building blocks from price action that has already been fully traded through and is less relevant. Step 5: Extend and manage the order block Once created, the block: Extends to the right by a configurable number of candles (Extend Zones). Continues until it is invalidated by wick or close, depending on the chosen method. Can show retest labels when price revisits the zone after creation. Is included or excluded from display depending on the Show Nearest and Hide Invalidated Zones settings. Example of active and invalidated OB. 🔹Order Block Settings ◇ Swing Length Swing Length controls how sensitive swing highs and lows are. Lower Swing Length: Swings form more frequently, which leads to more frequent BOS events and order block formations. Higher Swing Length: Only larger, more meaningful swings are detected, which leads to less frequent BOS events and less order block formations. ◇ Invalidation Invalidation determines how an order block is considered “mitigated” or no longer valid. Wick: For bullish OBs, if price wicks completely through the bottom of the zone, the order block is invalidated. For bearish OBs, if price wicks completely through the top, the order block is invalidated. Close: For bullish OBs, the block is invalidated only when a candle closes below the bottom. For bearish OBs, it is invalidated only when a candle closes above the top. Example of wick invalidation: Example of close invalidation: ◇ Show Nearest Show Nearest limits how many active order blocks are displayed based on proximity to current price. For example, a value of 2 will display only the two nearest bullish order blocks and two nearest bearish order blocks. Chart with Show Nearest set to 3: ◇ Extend Zones Extend Zones define how many candles forward each order block should project beyond the right most candle on the chart. Chart with Extend Zones set to 10: ◇ Retest Labels When enabled, the indicator prints labels on every clean retest of an active order block, as long as that block remains valid. Key points: A retest label is only printed once the retest candle has fully closed – you always see confirmed retests, not intrabar tests. Retest labels are positioned on the actual retest candle so you can visually see which bar interacted with the zone. In addition, if multiple retests occur in quick succession, the indicator applies a built-in three-candle buffer between retests. That means only the first valid retest within each three-bar window is labeled (and can trigger an alert), helping to reduce clutter while still highlighting meaningful interactions with the zone. Example of retest labels on bullish and bearish order blocks. ◇ Hide Invalidated Zones Hide Invalidated Zones controls whether mitigated/invalidated blocks stay drawn. Enabled: Only currently valid, unmitigated order blocks are shown (subject to Show Nearest) Disabled: Both active and invalidated order blocks are displayed. VOLUME DELTA: 🔹What is Volume Delta Volume delta measures the difference between buying and selling volume. Instead of only showing “how much volume traded”, it separates volume into bullish and bearish components. In this indicator: Bullish volume = volume from candles (or lower timeframe candles) that closed higher. Bearish volume = volume from candles that closed lower. Delta % shows how dominant one side was compared to the total. Example of bullish and bearish order blocks with volume delta and total volume. 🔹How is Volume Delta calculated? The indicator uses a flexible, timeframe-aware volume engine. 1. Choose a Volume Delta Timeframe. If the selected timeframe is equal to or higher than the chart timeframe, the indicator simply uses chart-volume per candle. If the selected timeframe is lower than the chart timeframe (for example, 1‑minute volume on a 5‑minute chart), the indicator pulls all lower timeframe candles for each chart bar and sums them. 2. Split each bar into bull and bear volume. For each contributing candle: If close > open → its volume is added to bullish volume. If close < open → its volume is added to bearish volume. If close == open → its volume is split evenly between bullish and bearish. 3. Aggregate for each order block. For each order block: The indicator loops once from the swing candle to the BOS candle. It records every candle that touches the POC band. For each touching candle, it adds its bull and bear volumes (either directly from chart candles or from aggregated lower timeframe candles). Total volume = bullish volume + bearish volume Delta % = (bullish volume or bearish volume / total volume ) * 100, depending on which side is dominant. 🔹Volume Delta Settings: ◇ Display Style Display Style controls how the volume delta is drawn inside each order block: Horizontal: Bullish and bearish fills extend horizontally from left to right. The filled strip sits along the base of the block, with a bull vs bear gradient. Vertical: Bullish and bearish fills stretch vertically inside the zone. The bullish percentage controls how much of the block is filled with the “dominant” color. Example of Horizontal display style. Example of Vertical display style. ◇ Volume Delta Timeframe Volume Delta Timeframe tells the indicator whether to use chart volume or lower timeframe volume. When set to a lower timeframe, the indicator aggregates all lower timeframe candles that fall inside each chart bar, splitting their volume into bullish and bearish components before summing. Using a lower timeframe: Increases precision for how volume truly behaved inside each bar. Helps reveal hidden absorption and aggressive flows that a higher timeframe candle might hide. Example of volume delta based on chart timeframe. Example of volume delta based on lower timeframe than chart(same OB as above) ◇ Display Total Volume When enabled, the indicator prints the total volume for each order block as a label positioned inside the zone, near the bottom-right corner. This total is the sum of bullish and bearish volume used in the delta calculation and gives you a quick sense of how “heavy” the trading was in that block compared to others. Example of total volume label inside multiple order blocks. ◇ Show Delta % Show Delta % draws a small text label on the strip of the block that displays the dominant side’s percentage. For example, a bullish block might show “72%” if 72% of all volume inside that POC band came from bullish volume. Example of Delta %: 3D VISUALIZATION: The 3D Visualization feature turns each order block into a 3D plot. 🔹What the 3D Visualization does: Wraps the order block with side faces and a top face to create a 3D bar effect. Uses delta percentages to tilt the top face toward the dominant side. Projects blocks into the future using Extend Zones, making the 3D blocks visually stand out. 🔹How it works: The front face of the OB shows the standard 2D zone. The side face extends forward in time based on the 3D depth setting. The top face is angled depending on the Display Style and bull vs bear delta, making strong bullish blocks “rise” and strong bearish blocks “sink”. 🔹How the 3D depth setting affects visuals Lower 3D depth: Shorter side faces. Subtle 3D effect. Higher 3D depth: Longer side faces projecting further into the future. Stronger 3D effect that visually highlights key zones. Example of lower 3D depth: Example of higher 3D depth: ALERTS: The indicator supports alert conditions through TradingView’s AnyAlert() engine, allowing you to set alerts for the following: New Bullish Order Block formed New Bearish Order Block formed Bullish OB Retest Bearish OB Retest Important alert behavior: Order block alerts only fire when a new block is confirmed (after BOS closes and the next bar opens). Retest alerts only fire when a retest candle has completely finished, matching the behavior of the visual retest labels. IMPORTANT NOTES: 3D faces for order blocks are built using polylines. In some situations, especially when an order block’s starting point (its left edge) is beyond the chart’s left-most visible bar, the top 3D face may appear slightly irregular, skewed, or incomplete. This is purely a drawing limitation related to how the chart engine handles off-screen polyline points. Once the starting point of that order block comes into view (by zooming out or scrolling back), the 3D top face corrects itself and the visual becomes fully consistent. This issue affects only the 3D top face drawing, not the actual order-block box itself. The underlying zone, prices, and volume calculations remain accurate at all times. If all conditions are met to create a new order block but the resulting zone would overlap an existing active order block, the new block is intentionally not created. A built-in guard prevents overlapping active zones to keep the structure clean and easier to interpret. 3D face drawing is implemented using an adaptive polyline method, which can be relatively calculation-heavy on certain symbols, timeframes, or chart histories. In some cases this may lead to calculation timeout error from TradingView. UNIQUENESS: This indicator is unique because it: Anchors each order block to the earliest unmitigated candle that traded through the most-touched POC band between swing and BOS, rather than a generic “last up/down candle” or a random volume spike. Builds a dedicated volume engine that can pull either chart timeframe volume or aggregated lower timeframe volume, then splits it into bull and bear components. Adds 3D visualization on top of standard zones, turning each OB into a visually weighted slab rather than a flat rectangle. Provides clean toggles (Show Nearest, Hide Invalidated Zones, Extend Zones, Display Style, Delta %, and total volume labels) so you can dial the indicator from extremely minimal to fully detailed, depending on your trading workflow. Combined, these features make the indicator not just an order block plotter, but a complete volume‑informed structure tool tailored for traders who want to see where price actually traded and whether bulls or bears truly controlled the move inside each order block.
Pine Script®指标
由fluxchart提供
13
RSI Trend Authority [JOAT]RSI Trend Authority - VAR-RSI with OTT Trend Detection System Introduction RSI Trend Authority is an open-source overlay indicator that combines Variable Index Dynamic Average (VAR) smoothed RSI with the Optimized Trend Tracker (OTT) to create a complete trend detection and signal generation system. Unlike traditional RSI which oscillates in a separate pane, this indicator scales the RSI to price and overlays it directly on your chart, making trend analysis more intuitive. The indicator generates clear BUY and SELL signals when the smoothed RSI crosses the OTT trailing stop line, providing actionable entry points with trend confirmation. Originality and Purpose This indicator is NOT a simple mashup of RSI and moving averages. It is an original implementation that transforms RSI into a trend-following overlay system: Why VAR Smoothing? Traditional RSI is noisy and produces many false signals. The Variable Index Dynamic Average (VAR) is an adaptive smoothing algorithm based on the Chande Momentum Oscillator principle. It adjusts its smoothing factor based on market conditions - responding quickly during trends and smoothing out during choppy markets. This creates an RSI that filters noise while preserving genuine momentum shifts. Why OTT Trailing Stop? The Optimized Trend Tracker (OTT) is a percentage-based trailing stop mechanism that only moves in the direction of the trend. When VAR-RSI crosses above OTT, a bullish trend is confirmed; when it crosses below, a bearish trend is confirmed. This provides clear, actionable signals rather than subjective interpretation. Price Scaling Innovation: By scaling RSI (0-100) to price using the formula (RSI * close / 50), the indicator overlays directly on the price chart. This allows traders to see how momentum relates to actual price levels, making trend analysis more intuitive than a separate oscillator pane. ATR Boundaries: Optional volatility-based boundaries show when price is extended relative to its normal range, helping identify potential reversal zones. How the components work together: VAR smoothing removes RSI noise while preserving trend information OTT provides a dynamic trailing stop that generates clear crossover signals Price scaling allows direct overlay on the chart for intuitive analysis ATR boundaries add volatility context for profit target estimation Core Components 1. VAR-RSI (Variable Index Dynamic Average RSI) The foundation of this indicator is the VAR smoothing algorithm applied to RSI. VAR is an adaptive moving average that adjusts its smoothing factor based on the Chande Momentum Oscillator principle: f_var_calc(float data, int length) => int a = 9 float b = data > nz(data ) ? data - nz(data ) : 0.0 float c = data < nz(data ) ? nz(data ) - data : 0.0 float d = math.sum(b, a) float e = math.sum(c, a) float f = nz((d - e) / (d + e)) float g = math.abs(f) float h = 2.0 / (length + 1) float x = ta.sma(data, length) This creates an RSI that: Responds quickly during trending conditions Smooths out during choppy, sideways markets Reduces false signals compared to raw RSI 2. OTT (Optimized Trend Tracker) The OTT acts as a dynamic trailing stop that follows the VAR-RSI: In uptrends, OTT trails below the VAR-RSI line In downtrends, OTT trails above the VAR-RSI line The OTT Percent parameter controls how closely it follows When VAR-RSI crosses above OTT, a bullish trend is confirmed. When VAR-RSI crosses below OTT, a bearish trend is confirmed. 3. Price Scaling The RSI (0-100 scale) is converted to price scale using: float scaleFactor = close / 50.0 float varRSIScaled = varRSI * scaleFactor This allows the indicator to overlay directly on price, showing how momentum relates to actual price levels. Visual Components VAR-RSI Line (Cyan/Magenta) The main indicator line with gradient coloring: Cyan gradient when RSI is above 50 (bullish) Magenta gradient when RSI is below 50 (bearish) Line thickness of 3 for clear visibility OTT Line (Yellow Circles) The trailing stop line displayed as circles: Acts as dynamic support in uptrends Acts as dynamic resistance in downtrends Crossovers generate trading signals Trend Fill The area between VAR-RSI and OTT is filled: Cyan fill during bullish trends Magenta fill during bearish trends Fill transparency allows price visibility Buy position and LONG on Dashboard with a Uptrend: ATR Boundaries (Optional) Dotted lines showing volatility-based price boundaries: Upper band: Close + (ATR x Multiplier) Lower band: Close - (ATR x Multiplier) Color matches current trend direction Buy/Sell Signals Clear labels appear at signal points: BUY label below bar when VAR-RSI crosses above OTT SELL label above bar when VAR-RSI crosses below OTT Additional glow circles highlight signal bars Bar Coloring Optional feature that colors price bars: Cyan bars during bullish trend Magenta bars during bearish trend Dashboard Panel The 8-row dashboard provides comprehensive status information: Signal: Current position - LONG or SHORT (large text) VAR-RSI: Current smoothed RSI value (large text) RSI State: OVERBOUGHT, OVERSOLD, BULLISH, or BEARISH OTT Trend: UPTREND or DOWNTREND based on OTT direction Bars Since: Number of bars since last signal Price: Current close price (large text) OTT Level: Current OTT trailing stop value Input Parameters RSI Settings: RSI Length: Period for RSI calculation (default: 100) Source: Price source (default: close) VAR Settings: VAR Length: Adaptive smoothing period (default: 50) OTT Settings: OTT Period: Trailing stop calculation period (default: 30) OTT Percent: Distance percentage for trailing stop (default: 0.2) ATR Trend Boundaries: Show ATR Boundaries: Toggle visibility (default: enabled) ATR Length: Period for ATR calculation (default: 14) ATR Multiplier: Distance multiplier (default: 2.0) Display Options: Show Buy/Sell Signals: Toggle signal labels (default: enabled) Show Status Table: Toggle dashboard (default: enabled) Table Position: Choose corner placement Color Bars by Trend: Toggle bar coloring (default: enabled) Color Scheme: Bullish Color: Main bullish color (default: cyan) Bearish Color: Main bearish color (default: magenta) OTT Line: Trailing stop color (default: yellow) VAR-RSI Line: Main line color (default: teal) ATR colors for boundaries How to Use RSI Trend Authority Signal-Based Trading: Enter LONG when BUY signal appears (VAR-RSI crosses above OTT) Enter SHORT when SELL signal appears (VAR-RSI crosses below OTT) Use the OTT line as a trailing stop reference Trend Confirmation: Cyan fill indicates bullish trend - favor long positions Magenta fill indicates bearish trend - favor short positions Check RSI State in dashboard for momentum context Using the Dashboard: Monitor "Bars Since" to assess signal freshness Check RSI State for overbought/oversold warnings Use OTT Level as a reference for stop placement ATR Boundaries: Price near upper ATR band in uptrend suggests extension Price near lower ATR band in downtrend suggests extension Boundaries help identify potential reversal zones Parameter Optimization For Faster Signals: Decrease RSI Length (try 50-80) Decrease VAR Length (try 30-40) Decrease OTT Period (try 15-25) For Smoother Signals: Increase RSI Length (try 120-150) Increase VAR Length (try 60-80) Increase OTT Period (try 40-50) For Tighter Stops: Decrease OTT Percent (try 0.1-0.15) For Wider Stops: Increase OTT Percent (try 0.3-0.5) Alert Conditions Three alert conditions are available: Buy Signal: VAR-RSI crosses above OTT Sell Signal: VAR-RSI crosses below OTT Trend Change: OTT direction changes Understanding the OTT Calculation The OTT uses a percentage-based trailing mechanism: float farkOTT = mavgOTT * ottPercent * 0.01 float longStopCalc = mavgOTT - farkOTT float shortStopCalc = mavgOTT + farkOTT longStop := mavgOTT > nz(longStop ) ? math.max(longStopCalc, nz(longStop )) : longStopCalc shortStop := mavgOTT < nz(shortStop ) ? math.min(shortStopCalc, nz(shortStop )) : shortStopCalc This ensures the trailing stop only moves in the direction of the trend, never against it. Best Practices Use on 1H timeframe or higher for more reliable signals Wait for signal confirmation before entering trades Consider RSI State when evaluating signal quality Use ATR boundaries for profit target estimation The longer RSI length (100) provides smoother trend detection Combine with support/resistance analysis for better entries Limitations Signals may lag during rapid price movements due to smoothing Works best in trending markets; may whipsaw in ranges The overlay nature means RSI values are scaled, not absolute Default parameters are optimized for crypto and forex; adjust for other markets Technical Notes This indicator is written in Pine Script v6 and uses: VAR (Variable Index Dynamic Average) for adaptive smoothing OTT (Optimized Trend Tracker) for trailing stop calculation ATR for volatility-based boundaries Gradient coloring for intuitive trend visualization The source code is open and available for review and modification. Disclaimer This indicator is provided for educational and informational purposes only. It is not financial advice. Trading involves substantial risk of loss. Past performance does not guarantee future results. Always conduct your own analysis and use proper risk management. -Made with passion by officialjackofalltrades
Pine Script®指标
由officialjackofalltrades提供
6
[Greeny] RTH Only Naked VPOCWhat it does Calculates and displays daily Volume Point of Control (VPOC) levels based on RTH (Regular Trading Hours) session only. Tracks which VPOCs remain "naked" (untouched) and which have been hit - but only counts hits during RTH hours, ignoring overnight/globex touches. Key Features One VPOC per trading day calculated from entire RTH session volume profile RTH-only hit detection - levels only marked as hit when touched during RTH, not overnight Works on all timeframes - daily, hourly, or any chart timeframe Volume-based filtering - automatically skips low-liquidity sessions (pre-front-month contract data) Visual markers - small dash on origin bar shows where each VPOC was, even after being hit Visual Guide Yellow dashed line - Naked VPOC (not yet touched during RTH) White dashed line - Hit VPOC (was touched during RTH) Small dash on candle - POC origin marker Settings Display options: Toggle to show only naked POCs, customize hit/naked colors, adjust line width and style (solid/dashed/dotted), enable/disable line extension and origin markers. RTH Session: Configure start and end time in NY timezone. Default is 9:30-16:00 (US equity market hours), which equals 15:30-22:00 Budapest time. Advanced: Adjust volume profile resolution (default 250 bins), data source timeframe for calculations (5min recommended for daily charts), and minimum volume threshold to filter out low-liquidity sessions like pre-rollover contract data (default 10% of average). Best For ES/MES, NQ/MNQ futures traders Mean reversion strategies using VPOC as support/resistance Auction Market Theory practitioners Anyone wanting clean RTH-only volume profile levels Note on Contract Rollovers When using specific contract symbols (e.g., ESH2026 instead of ES1!), the script may show many naked VPOCs from months before the contract became active. This happens because futures contracts have very low liquidity before becoming the front-month, creating unreliable VPOCs with gaps that never get hit. The volume filter helps reduce this, but you may need to increase the "Min Volume % of Average" setting or simply ignore older levels when viewing back-month data.
Pine Script®指标
由GreenyEdge提供
1
LiquidityPulse MTF Intrabar Micro-Structure Absorption DetectorLiquidityPulse MTF Intrabar Micro-Structure Absorption Detector Non-repainting: Markers appear on bar close and do not change. Important (if you can’t see any markers) This indicator measures intrabar micro-structure and it can use seconds-based micro data on lower timeframes. If you load it and don’t see anything: Go to 15m or higher, or In settings, change Micro feed (inside HTF bar) from Auto to 1m / 5m / 15m. Auto will often choose a “micro” feed that’s very small when your HTF is small, which can affect what you see. What this indicator does This script is designed to highlight absorption-like conditions by analysing what happens inside each higher-timeframe (HTF) candle — not just the candle’s OHLC. It looks for candles where: price moves a lot internally (high intrabar activity), the candle structure shows churn / rejection (wick dominates body), and participation is elevated (relative high volume). When those conditions align, the indicator prints a marker line at the wick extreme: LW (Lower-wick marker) = printed at the candle’s low UW (Upper-wick marker) = printed at the candle’s high Each marker is then extended to the right (so it can be treated like a potential level). Image shows a wick-dominant candle with an absorption marker: Markers appear when price shows strong intrabar movement, a wick-dominant candle structure, and elevated participation — a combination often associated with absorption-like behaviour. How it works A marker is created only when all three filters pass on a confirmed candle close: 1) Intrabar micro-speed (internal activity) The script pulls intrabar closes from a lower timeframe (“micro feed”) and sums the absolute internal price changes inside the HTF candle. It then converts this to a Z-score and checks it against the Speed-z threshold. Higher threshold = fewer, stronger events. 2) Wick vs body (churn / rejection structure) This measures how the HTF candle’s internal range compares to its net close-to-open movement using: Churn ratio = (HTF range) / (HTF body) If the candle has a large range but a relatively small body, it indicates that price moved extensively during the candle but made limited net progress by the close — a structure often associated with active two-sided participation and absorption-like behaviour. 3) Relative HTF volume (participation filter) The script also Z-scores HTF volume and requires it to exceed the Volume z-score threshold. This helps filter out candles that show apparent activity but occur on relatively low participation. Multi-timeframe + micro-structure analysis: Image shows a 15 minute chart marker on the 1 minute timeframe. The indicator can analyse higher-timeframe candles (15 minute) while using lower-timeframe micro data inside each bar (1 minute). This allows absorption-style markers to be plotted with higher-timeframe context and intrabar detail. Composite Intensity When a marker triggers, the script calculates a Composite Intensity number (CI): It’s a combined score based on how strongly each of the three conditions exceeded its threshold. Higher CI = stronger absorption-style event Higher CI = brighter chart marker The table shows: HTF and Micro timeframes being used the last marker type (LW or UW) the last CI value Micro feed & multi-timeframe behaviour This indicator always works as a two-layer system: HTF candle (context) → the candle you’re analysing Micro feed (inside HTF bar) → the intrabar data used to measure micro-speed Higher-TF source Chart timeframe = uses your chart timeframe as HTF Manual = choose any HTF (example: chart = 1m, HTF = 15m → prints 15m absorption markers onto a 1m chart) Micro feed options Auto (recommended) picks a sensible micro feed based on HTF Or choose 1s / 1m / 5m / 15m manually for performance/clarity HTF direction filter (optional) When enabled: LW markers only print when the HTF candle closes bullish UW markers only print when the HTF candle closes bearish This is optional and is designed to reduce noise by aligning markers with the directional bias of the higher-timeframe candle. Traders can use the absorption markers to: Identify potential areas of interest where price showed unusually high intrabar activity but limited net progress by the close. Mark reference levels where price may react again later, reflecting prior elevated participation and extensive intrabar movement areas. Add structural context to existing analysis such as trend structure, support/resistance, session highs/lows, or other volume-based tools. Compare behaviour across timeframes, by observing how absorption-style events on a higher timeframe align with lower-timeframe price action. Image shows price reacting to a previous absorption markers level (Lines/ levels can be extended in the settings): Extended LW / UW markers can be observed as areas of prior absorption-like activity. Traders may watch how price behaves around these levels (reaction, acceptance, or rejection) alongside their own structure, liquidity, or risk management tools. Key settings (what they change) Higher-TF source / Higher-TF bar (manual): which candle timeframe is analysed Micro feed (inside HTF bar): what intrabar resolution is used to calculate micro-speed Speed-z threshold: how unusual intrabar activity must be Wick/Body threshold: how large the candle’s total range must be compared to its body Volume z-score threshold: how elevated HTF volume must be Z-score look-back: how far back the indicator normalises speed/volume Line extension (bars): raise if you want markers to behave more like extended levels Max markers: how many markers remain on the chart at once Alerts Alerts trigger on candle close when an absorption marker is detected. Disclaimer This indicator does not measure true order flow or the full limit order book. It uses intrabar price activity, candle structure, and relative participation as interpretive tools to highlight absorption-like behaviour. It is not a buy/sell system, and all signals should be used with traders own confirmation and risk management.
Pine Script®指标
由Liquidity-Pulse提供
2
Dow Theory Cockpit [Analytics Pro]1. Overview and Key Features The core philosophy of this tool is to "Eliminate market noise and pinpoint high-probability trade setups. 　🤖 Triple-Logic Engine: Automatically detects three distinct strategies: Trend Following 　　 　　　(Breakout), Retracement (Dip), and Reversal (Sniper). 　🛡️ Ironclad Protection: Features an ATR-based dynamic Stop Loss (SL). It automatically 　　 positions your SL at levels resistant to "stop hunting" or market noise. 　💰 Automatic Risk Management: The tool calculates and displays the optimal lot size based 　　 on your SL distance, ensuring your risk amount remains constant regardless of market 　　 volatility. 　📊 Performance Visualization: Real-time Win Rate panel displaying data for "Today," "This 　　 Month," "This Year," and "All Time. 　🌍 Global Market Insights: Monitor not just your active chart, but also Gold, JPY, BTC, and 　　 critical US/JP economic indicators (Interest Rates, Inflation, etc.) simultaneously. 2. Three Entry Signals The tool automatically toggles between three optimized logics depending on market conditions Signal　　　　Type　　　　　Target & Strategy 🎯 SNIPER　　 Reversal　　　　Captures "Tops and Bottoms." Detects RSI exhaustion + Bollinger 　　　　　　　　　　　　　 Band mean reversion to catch the start of a reversal. DIP　　　 Trend Following　　Captures "Pullbacks." Picks up entries when price touches MAs or 　　　　　　　　　　　　　 retraces during a strong uptrend. BREAK　　Trend Following　　Captures "Breakouts." Rides the momentum the moment price 　　　　　　　　　　　　　　breaks recent Highs or Lows. 　　💡 Pro Tip: When multiple conditions align, signals merge (e.g., "SNIPER & DIP") to keep 　　　 your chart clean and highlight high-conviction setups. 3. Dashboard Guide The dual-panel interface is fully customizable in terms of visibility and placement. ① Main Analysis Panel (Default: Top Right) In-depth analysis of the current currency pair. ・MAIN: Displays the pair and volatility status (HIGH VOL / NORMAL). ・Target RR: Your target Risk:Reward ratio (e.g., 1:1.5). ・🌊 Trend Monitor: Instantly check trend directions across 15M, 1H, 4H, and Daily timeframes. 　・Strategic Note: When all timeframes align (Full Alignment), the signal is considered a "high- 　　probability" setup. ・📊 Win Rate: Tracks success rates and trade counts across four periods (Day, Mo, Yr, All). ・Risk: Shows current risk settings, spread, and account type. ② Market Scanner Panel (Default: Bottom Right) Multi-market and fundamental surveillance. ・SCANNER: Constant monitoring of Gold, USDJPY, and Bitcoin. It alerts you immediately when 　a trend or signal forms on these major assets. ・US/JP ECONOMY: Side-by-side comparison of essential fundamental data: 　・Rate: Policy Interest Rates 　・Inf%: Inflation (CPI) 　・GDP: Economic Growth Rate 　・Job: Unemployment / Payrolls 4. Trading Workflow Follow these steps for the highest success rate: １．STEP 1: Wait for SignalWait for the audio alert or the "BUY/SELL" label to appear. 　　Important: Never entry while the candle is still moving. ２．STEP 2: Filter ConfirmationJust before the candle closes, verify: 　・MTF Panel: Are the 1H and 4H colors aligned with the signal? (Green for Buy, Red for Sell) 　・MA Ribbon: Is the ribbon showing a clean, healthy spread? ３．STEP 3: Execution (At Candle Close)If the signal remains after the candle closes, enter at 　　the open of the next candle. Use the "Lot: X.XX" value shown on the blue label—this is your 　　safety-calculated lot size. ４．STEP 4: Exit Strategy (TP/SL)Immediately set your orders based on the lines on the chart:　 　・🟥 Red Line (SL): Positioned at 3x ATR to withstand noise. 　・🟩 Green Line (TP): Optimized for consistent win rates. 5. Customization ・ : Set your Risk(%) per trade (Recommended: 1.0–2.0%). Adjust the SL Buffer (Default 3.0) to balance win rate versus lot size. ・ : Adjust font size (Tiny/Small/Normal) and panel width to fit your screen resolution. ・ : Customize colors and thickness to match your visual preference.
Pine Script®指标
由Hide_FX_Treader提供
H1 Liquidity Sweep Tracker🇬🇧 English: H1 Liquidity Sweep Tracker Overview The H1 Liquidity Sweep Tracker is a technical analysis tool designed for TradingView (Pine Script v5). It identifies "Liquidity Sweeps"—market movements where the price briefly breaches a significant level to trigger stop-loss orders before reversing. Core Functions H1 Level Detection: Regardless of your current timeframe (e.g., 1m, 5m, or 15m), the script automatically fetches the High and Low of the previous 1-hour candle. Real-Time Monitoring: It tracks price action relative to these levels to identify failed breakouts. Visual Indicators: Horizontal Lines: Displays the H1 High (Red) and H1 Low (Green) from the previous hour. Sweep Shapes: A triangle appears above/below the candle when a sweep is detected. How it Works (The Logic) A "Sweep" is triggered when the current price moves beyond the H1 boundary but fails to maintain that position: Bullish Sweep: The price drops below the previous H1 Low (collecting sell-side liquidity) but closes back above it. This suggests a potential upward reversal. Bearish Sweep: The price rises above the previous H1 High (collecting buy-side liquidity) but closes back below it. This suggests a potential downward reversal.
Pine Script®指标
由ingoschloemer提供
Dynamic Supports + Volume Profile (Smart Time Selector)This indicator is an "All-in-One" tool designed to simplify Market Structure and Volume analysis on higher timeframes (especially Daily charts). Its main innovation is the **Unique Period Selector**, which automatically adjusts 5 internal parameters (tolerance, pivot sensitivity, resolution, and historical depth) with a single click. **🛠️ MAIN FEATURES:** 1. **Automatic Engine (1-5 Years):** * Forget about manually setting pivot lengths or "Lookback". * Select **"1 Year"**: The script scans for fast pivots and recent volume for *Swing Trading*. * Select **"5 Years"**: The script filters noise and shows only "Rock-Solid" structures (Historical S/R) for *Long Term Investing*. 2. **"Merged" Support & Resistance (S/R):** * The script detects Pivot Highs/Lows. * **Fusion Logic:** If price bounces multiple times in the same zone (within calculated tolerance), the script updates the existing line instead of drawing a new one. It extends the line and counts the touches (e.g., "S (4)" means a Support validated 4 times). * **Clean Chart:** Avoids visual noise. 3. **Lateral Volume Profile (VP):** * Displays volume distribution to the right of the current price. * **Orange POC (Point of Control):** Marks the exact price level with the highest trading volume in the selected period. **🚀 HOW TO USE (STRATEGY):** Best used on the **Daily Timeframe (1D)**: * **Scenario 1: Mean Reversion** * If price moves far from the **Orange POC**, look for it to act as a magnet. * Enter when price touches a **Green Line (Support)** that aligns with a high volume node. * **Scenario 2: Breakout** * If price breaks a **Red Line (Resistance)** aggressively and the volume above is thin (low volume nodes), the move tends to be fast due to lack of friction. * **Scenario 3: Multi-Timeframe Analysis** * Use "5 Years" to mark your long-term zones. * Switch to "1 Year" for tactical entries. **🎨 VISUAL SETTINGS:** * **Green Lines:** Demand Zones (Supports). * **Red Lines:** Supply Zones (Resistances). * **Dotted Orange Line:** POC (Fair Value). * **Blue Bars:** Volume Profile. **Disclaimer / Descargo:** This script is designed for educational and analytical purposes on the daily timeframe. Use it to identify zones of interest, not as automatic buy/sell signals.
Pine Script®指标
由ivandiaz2007提供
3
MACD Histogram Expansion Alerts (Scalp)Purpose: Alerts when MACD histogram is expanding (momentum increasing) rather than simply crossing. Designed for 1-minute scalping and intraday momentum confirmation. This script is for traders who are tired of late MACD cross alerts. Instead of firing when MACD lines cross (which often happens after the move), this indicator alerts when the MACD histogram is expanding — meaning momentum is actually increasing right now, not rolling over. I use it as a “heads up” alert, not a buy/sell signal. When it fires, I check price action, volume, VWAP, support/resistance, etc., to see if the move is worth trading. Best suited for 1-minute charts, scalping, and fast intraday momentum. MACD Histogram Expansion Alerts (Scalp) is a lightweight alert-focused indicator designed for intraday traders and scalpers, particularly on lower timeframes such as the 1-minute chart. Rather than triggering alerts on standard MACD line crossovers (which tend to lag in fast or volatile markets), this script detects MACD histogram expansion — a condition that indicates momentum acceleration, not just direction. 🔍 What this script does Uses a fast MACD configuration suitable for lower timeframes Monitors the MACD histogram slope and magnitude Triggers alerts only when the histogram expands for multiple consecutive bars Alerts are fired on bar close only, reducing noise and false intrabar signals 🚀 Why focus on histogram expansion? Histogram expansion highlights when momentum is building, which can be useful for: Continuation setups Early momentum confirmation Avoiding entries when momentum is already fading This approach is especially helpful in small caps, news-driven stocks, and volatile intraday instruments, where traditional MACD cross alerts can arrive too late. 🔔 Alert Types Bullish MACD Histogram Expansion Bearish MACD Histogram Expansion Each alert can be enabled independently and is intended as an attention signal, not a standalone trading system. ⚙️ Customizable Inputs MACD Fast / Slow / Signal lengths Number of consecutive expanding histogram bars required Optional minimum histogram magnitude filter Optional directional filter (above/below zero line) ⚠️ Important Notes!!!! This script does not place trades Alerts should be used with additional context, such as price action, volume, VWAP, or support/resistance Not designed for higher-timeframe or swing trading use . If you find this helpful, feel free to adapt it to your own trading style or timeframe. This script is meant to be simple, flexible, and non-opinionated.
Pine Script®指标
由jecoombs523提供
Liquidation Bubbles [OmegaTools]🔴🟢 Liquidation Bubbles — Advanced Volume & Price Stress Detector Liquidation Bubbles is a professional-grade analytical tool designed to identify forced positioning events, stop-runs, and liquidation clusters by combining price displacement and volume imbalance into a single, statistically normalized framework. This indicator is not a repainting signal tool and not a simple volume spike detector. It is a contextual market stress mapper, built to highlight areas where one-sided positioning becomes unstable and the probability of forced order execution (liquidations, stops, margin calls) materially increases. --- ## 🔬 Core Concept Market liquidations do not occur randomly. They emerge when price deviates aggressively from its volume-weighted equilibrium while volume itself becomes abnormal. Liquidation Bubbles detects exactly this condition by: * Estimating a **dynamic equilibrium price** using an *inverted volume-weighted moving average* * Measuring **directional price stress** relative to that equilibrium * Measuring **volume stress** relative to its own adaptive baseline * Normalizing both into **Z-score–like metrics** * Highlighting only **statistically extreme, asymmetric events** The result is a clear visual map of stress points where market participants are most vulnerable. --- ⚙️ Methodology (How It Works) 1️⃣ Advanced Inverted VWMA (Equilibrium Engine) The script uses a custom Advanced VWMA, where: * High volume bars receive less weight * Low volume bars receive more weight This produces a **robust equilibrium level**, resistant to manipulation and volume bursts. This equilibrium is used for **both price and volume normalization**, creating a consistent statistical framework. --- 2️⃣ Price Stress (Directional) Price stress is calculated as: * The **maximum deviation** between high/low and equilibrium * Directionally signed (upside vs downside) * Normalized by its own historical volatility This allows the script to distinguish: * Aggressive upside exhaustion * Aggressive downside capitulation --- 3️⃣ Volume Stress Volume stress is measured as: * Deviation from volume equilibrium * Normalized by historical volume dispersion This filters out: * Normal high-volume sessions * Illiquid noise And isolates abnormal participation imbalance. --- 4️⃣ Liquidation Logic A liquidation event is flagged when: * Both price stress and volume stress exceed adaptive thresholds * The imbalance is directional and statistically extreme Optional Combined Score Mode allows aggregation of price & volume stress into a single composite metric for smoother signals. --- 🔵 Bubble System (Signal Hierarchy) The indicator plots **two tiers of bubbles**: 🟢🔴 Small Bubbles * Early warning stress points * Localized stop-runs * Micro-liquidations * Often precede reactions or short-term reversals 🟢🔴 Big Bubbles * Full liquidation clusters * Forced unwinds * High probability exhaustion zones * Frequently align with: * Intraday extremes * Range boundaries * Reversal pivots * Volatility expansions Bubble color: * **Green** → Downside liquidation (sell-side exhaustion) * **Red** → Upside liquidation (buy-side exhaustion) Bubble placement is **ATR-adjusted**, ensuring visual clarity without overlapping price. --- 🔄 Cross-Market Volume Analysis The script allows optional **external volume sourcing**, enabling: * Futures volume applied to CFDs * Index volume applied to ETFs * Spot volume applied to derivatives This is critical when: * Your traded instrument has unreliable volume * You want **institutional-grade confirmation** --- 🧠 How to Use Liquidation Bubbles This indicator is **not meant to be traded alone**. Best use cases: * 🔹 Confluence with support & resistance * 🔹 Contextual confirmation for reversals * 🔹 Identifying fake breakouts * 🔹 Liquidity sweep detection * 🔹 Risk management (avoid entering into liquidation zones) Ideal for: * Futures * Indices * Crypto * High-liquidity FX pairs * Intraday & swing trading --- 🎯 Who This Tool Is For Liquidation Bubbles is designed for: * Advanced discretionary traders * Order-flow & liquidity-based traders * Macro & index traders * Professionals seeking **context**, not signals If you want **where the market is fragile**, not just where price moved — this tool was built for you. --- 📌 Key Characteristics ✔ Non-repainting ✔ Statistically normalized ✔ Adaptive to volatility ✔ Works on all timeframes ✔ Futures & crypto ready ✔ No lagging indicators ✔ No moving average crosses --- Liquidation Bubbles does not predict the future. It shows you where the market is most likely to break. — OmegaTools
Pine Script®指标
由OmegaTools提供
1
Volume Cluster Profile [VCP] (Zeiierman)█ Overview Volume Cluster Profile (Zeiierman) is a volume profile tool that builds cluster-enhanced volume-by-price maps for both the current market window and prior swing segments. Instead of treating the profile as a raw histogram only, VCP detects the dominant volume peaks (clusters) inside the profile, then uses a Gaussian spread model to “radiate” those peaks into surrounding price bins. This produces a smoother, more context-aware profile that highlights where volume is most meaningfully concentrated, not just where it happened to print. On top of the live profile, VCP automatically records historical swing profiles between pivots, wraps each segment for clarity, and can project the most recent segment’s High/Low Value extensions (VA/LV) forward to the current bar to keep key structure visible as price evolves. █ How It Works ⚪ 1) Profile Construction (Volume-by-Price) VCP builds a volume profile histogram over a chosen window (current lookback, or a swing segment): Range Scan The script finds the full min → max price range inside the window. Bin the Range That range is divided into a user-defined number of Price Bins (rows). More bins = finer detail, but heavier computation. Accumulate Volume into Bins For each bar inside the window, the script takes the bar’s close price, determines which price bin it belongs to, and adds the bar’s volume to that bin. float step = (maxPrice - minPrice) / binsCount for i = 0 to barsToUse - 1 int b = f_clamp(int(math.floor((close - minPrice) / step)), 0, binsCount - 1) volBins += volume Result: volBins becomes a standard volume-by-price histogram (close-based binning). ⚪ 2) Cluster Detection (Finding Dominant Peaks) Once the raw histogram is built, VCP identifies cluster centers as the most meaningful volume “hills”: Local Peak Test A bin becomes a cluster candidate if its volume is greater than or equal to its immediate neighbors (left/right). Filter Weak Peaks Peaks must also be above a basic activity threshold (relative to the average bin volume) to avoid noise. bool isPeak = v >= left and v >= right if isPeak and v > avgVol array.push(clusterIdxs, b) Keep the Best Peaks Only If too many peaks exist, the script keeps only the strongest ones, capped by: Max Cluster Centers Result: clusterIdxs = the set of dominant profile peaks (cluster centers). ⚪ 3) Cluster Enhancement (Gaussian Spread Model) This is what makes VCP different from a raw profile. Instead of using volBins directly, the script builds an enhanced profile where each cluster center influences nearby price bins using a Gaussian curve: Distance from each bin to each cluster center is computed in “bin units” A Gaussian weight is applied so that bins near the center receive stronger influence, while bins farther away decay smoothly. Cluster Spread (sigma) controls how wide this influence reaches: low sigma produces tight, sharp clusters, while high sigma results in wider, smoother structure zones. enhanced += centerV * math.exp(-(dist*dist) / (2.0 * clusterSigma * clusterSigma)) volBinsAI := enhanced / szClFinal Result: volBinsAI = the cluster-enhanced volume value for each bin. In practice, VCP turns the profile into a structure map of dominant volume concentrations, rather than a simple “where volume printed” histogram. ⚪ 4) POC from the Enhanced Profile After enhancement: The bin with the highest volBinsAI becomes the POC (Point of Control) POC is plotted at the midpoint price of that bin if volBinsAI > maxVol maxVol := volBinsAI , pocBin := b So the POC reflects the cluster-enhanced profile rather than the raw histogram. █ How to Use ⚪ Read Cluster Structure (Default = 2 Clusters) By default, the Volume Cluster Profile (VCP) is configured to detect up to 2 dominant volume clusters within the profile. These clusters represent price zones where the market accepted trading activity, not just where volume printed randomly. ⚪ When TWO Clusters Appear When VCP detects two distinct clusters, it usually indicates: Two competing areas of value Ongoing auction between higher and lower acceptance zones Treat each cluster as an acceptance zone Expect slower price action and rotation inside clusters Expect faster movement in the low-volume space between clusters Use cluster-to-cluster movement as: rotation targets range boundaries acceptance vs rejection tests Typical behavior: Price enters a cluster → stalls, consolidates, rotates Price rejects at cluster edge → moves toward the opposite cluster ⚪ When ONLY ONE Cluster Appears If VCP detects only one cluster, or if two clusters visually merge into one: Volume is no longer split The market has formed a single dominant value area Price consensus is strong Treat the cluster as the primary value anchor Expect pullbacks and reactions around this zone Bias becomes directional: Above the cluster → bullish context Below the cluster → bearish context Inside the cluster → balance/chop This structure often appears during clean trends or stable equilibria. ⚪ VA/LV Extensions VCP projects two zones from the end of the most recent swing segment: VA extension = the segment’s highest enhanced-volume bin (dominant zone) LV extension = the segment’s lowest enhanced-volume bin (thin/weak zone) A breakout of the VA extension signals acceptance and potential continuation. A retest of the VA or LV extension is used to confirm acceptance or rejection, while rejection from either zone often leads to rotation back toward value. █ Settings Cluster Volume Profile Lookback Bars – how many recent bars build the current profile Price Bins – profile resolution (more bins = more detail, heavier CPU) Cluster Spread – Gaussian sigma; higher values widen/smooth cluster influence Max Cluster Centers – cap on detected peaks used in enhancement Historical Swing Cluster Volume Profile Pivot Length – swing sensitivity (larger = fewer, broader segments) Max Profiles – how many historical segments to retain Profile Width – thickness of each historical profile High & Low Value Area Profile VA/LV – extend the last segment’s top-bin and low-bin zones forward ----------------- Disclaimer The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
Pine Script®指标
由Zeiierman提供
22
Smart VWAP SignalsSmart VWAP Signals Smart VWAP Signals is an advanced indicator based on the VWAP Intraday V2 strategy, optimized using Grid Search to maximize performance. ⸻ 🎯 Key Features Trading Modes • BOTH: Combines mean reversion (Separator) and trend-following (KISS) signals • SEPARATOR: Mean reversion signals only, when price deviates significantly from VWAP • KISS: Trend-following signals only, aligned with VWAP direction ⸻ 🚦 Intelligent Traffic Light System • 🟢 GREEN: High Profit Factor – trade with confidence • 🟡 YELLOW: Medium Profit Factor – trade with caution • 🔴 RED: Low Profit Factor – avoid new entries ⸻ 🛡️ Risk Management • ATR-based Stop Loss with configurable maximum limit • Flexible Take Profit options: • VWAP target • Fixed Risk/Reward ratio • ATR multiple • Automatic stop-day after consecutive losses ⸻ 🔍 Configurable Filters • Signal cooldown between trades • Volatility filter (minimum ATR threshold) • Trend filter (EMA 200) • Volume filter • Multi-timeframe confirmation ⸻ 📊 Visualization & Analytics • Real-time statistics panel • VWAP with deviation bands • Trade history with WIN / LOSS percentages • Entry-to-exit lines • Fully customizable colors ⸻ ⚙️ Optimized Default Parameters Optimized via Grid Search, achieving: • ROI: 322% • Profit Factor: 1.97 • Win Rate: 68.4%
Pine Script®指标
由tomasgres2911提供
TrendSurfer Lite TrendSurfer Lite ⚡ Advanced Multi-Signal Trading Indicator for Precision Market Analysis TrendSurfer Pro LITE is a comprehensive trading system combining multiple technical analysis tools into one powerful indicator. Designed for traders seeking high-probability setups with customizable filters. Key Features: 📊 Core Signals Triangle Signals (▲▼): Volume-weighted momentum entries with 10-level volume scoring Master Trend System (△▽): Multi-EMA confirmation with RSI validation Order Blocks (🟩🟥): Smart money institutional zones with rejection detection Take Profit System (🎯): 8-indicator confluence system (RSI, Stochastic, Supertrend, CCI, MACD, BB, EMA Cross, Price Action) 🎯 Rejection Signals Master Trend Rejections: Dynamic support/resistance from trend lines EMA750 Rejections (White "R"): Major trend filter bounces VWAP Rejections (Pink "W"): Institutional level reactions Butterworth Filter Rejections (🟡): Advanced smoothing algorithm reversals Session Rejections (⚡): Tokyo/London/NY session high/low bounces Session Midline Rejections (Orange "M"): Half-range mean reversion 🌍 Session Analysis Tokyo Session (💴): Asian market range with automatic extensions London Session (💶): European volatility zones New York Session (💵): US market key levels Auto-adjusting timezone with UTC offset support 🔧 Advanced Filters EMA750 Master Filter: Global trend alignment for all signals VWAP Filter: Institutional bias confirmation Yellow Box Filter (🟨): Consolidation zone proximity detection 3 Time Filters: Customizable trading windows with visual backgrounds Volume Filter: Signal strength validation (6-10 scale) 📈 Visual Tools VWAP Purple Candles: Special candle coloring for VWAP crosses above EMA750 Stochastic-based Candle Colors: Overbought/oversold visual cues Previous Day Close Line: Key reference level Master Trend Table: Real-time multi-indicator dashboard ⚙️ Customization Full color customization for all elements Adjustable line thickness and transparency Configurable alert system for every signal type 19 independent alert conditions Best For: Intraday scalping and swing trading Multi-timeframe analysis Confluence-based trading strategies Institutional level detection Version 1.0 | Clean interface | Maximum flexibility | Professional-grade signals
Pine Script®指标
由jake_theboss提供
Institutional PointOverview Institutional Point is a sophisticated data-mining indicator designed to identify and track "institutional footprints" by isolating the single candle with the highest volume relative to a specific time anchor. Unlike traditional volume profiles that aggregate data into price bins, this script pinpoints the exact temporal origin of massive liquidity injections. Core Methodology The script operates on a multi-timeframe analysis engine (MTF). It scans sub-chart data (2-minute or 15-minute intervals) to find the absolute maximum volume peak within a defined period. Once the "Institutional Point" is identified: Source Identification: The origin candle is highlighted in white, signaling a high-conviction entry or exit by large-scale market participants. Zone Projection: A borderless "Institutional Zone" is projected forward from the spike’s high/low range. Dynamic Interaction: The zone remains active until the price revisits the area (mitigation) or until the time-based expiration is reached. Anchor Modes & Precision 8-Hour Cycle: Optimized for high-frequency scalping. Anchors reset at 00:00, 08:00, and 16:00. Utilizes ultra-precise 2-minute volume detection. Daily Session: Designed for intraday and swing traders. Anchors to the Daily Open. Utilizes 2-minute volume detection to isolate precise institutional orders. Weekly Cycle: Built for identifying major structural pivots. Anchors to the Weekly Open. Utilizes 15-minute volume detection for macro-liquidity analysis. Key Features Naked Level Tracking: Zones automatically stop extending the moment they are "hit" by price action, providing a clean visual of unmitigated liquidity. Anti-Noise Filter: Automatically excludes Saturday and Sunday data to maintain statistical integrity across global markets. Minimalist Interface: High-contrast visual design focused on scannability and professional chart aesthetics. Use Cases Data Science & Backtesting: Ideal for measuring the "Z-Score" or "Percentile Distance" from institutional peaks. Supply & Demand Trading: Automated identification of the "Origin of the Move." Magnet Analysis: Tracking "Naked" volume spikes as high-probability magnets for future price mean reversion.
Pine Script®指标
由AlchimistOfCrypto提供
RVOL Highlighter (Bullish Volume Spikes)Description: A simple yet powerful indicator that highlights candles with unusually high buying volume. What it does: Identifies candles where relative volume (RVOL) exceeds your chosen threshold AND the candle is bullish (green). These high-volume bullish candles often signal strong institutional buying interest or momentum breakouts. How it works: Calculates RVOL by comparing current volume to the simple moving average of volume over your selected period Only highlights candles that meet BOTH conditions: RVOL above threshold + bullish close Highlighted candles appear in bright magenta for easy visibility on dark mode charts Settings: RVOL Period: Lookback period for average volume calculation (default: 10) RVOL Threshold: Minimum relative volume multiplier to trigger highlight (default: 2.5x) Highlight Color: Customizable (default: magenta #FF00FF) Use cases: Spot potential breakout entries with volume confirmation Identify accumulation zones Filter for high-conviction bullish moves Works on any timeframe and any asset. The actual RVOL value is available in the data window when hovering over candles.
Pine Script®指标
由fabio284提供