Institutional Volume RSI [Adaptive]The Institutional Volume RSI is a next-generation momentum oscillator designed to solve the two biggest problems with standard RSI: Price Deception and Static Thresholds.
Standard RSI uses fixed 70/30 levels to define "Overbought" and "Oversold." This is flawed because in a strong institutional trend, the market can stay "Overbought" for weeks. Selling just because RSI hit 70 is a guaranteed way to lose money.
This tool fixes that.
It replaces static lines with Adaptive Volatility Bands . These bands breathe with the market—expanding during trends and contracting during squeezes—giving you a dynamic, statistically significant view of true momentum.
How It Works
The engine runs on three institutional concepts:
1. Volume-Weighted Source (VWMA) 📊
We calculate RSI based on Volume Weighted Moving Average , not just Close price.
Low Volume Move: RSI ignores it (Fakeout).
High Volume Move: RSI reacts aggressively (True Momentum).
2. Adaptive Volatility Bands 🌊
Instead of fixed lines, we use dynamic bands (similar to Bollinger Bands) applied directly to the RSI.
The Trend Ride: As long as the RSI line stays inside or above the Upper Band, the trend is strong. Do not sell.
The Squeeze: When the bands contract (get tight), it signals that volatility is dead and a massive explosive move is imminent.
3. Dynamic Sentiment Coloring 🎨
Green Line: RSI is above the baseline (Bullish Control).
Red Line: RSI is below the baseline (Bearish Control).
White Dots: These appear when RSI breaks outside the bands, signaling an extreme statistical anomaly (often a climax top or bottom).
The "Elastic Snap" Strategy
Recommended Companion: Hooke's Law: Market Elasticity
This indicator is the perfect "Trigger" for a Mean Reversion system. We recommend pairing it with a Reversal indicator (like Hooke's Law) to create a complete Setup + Trigger system.
The Strategy Rules:
1. The Setup (The Stretch) 📏
Wait for your Reversal Indicator (e.g., Hooke's Law) to identify an overextended market condition (Overbought/Oversold).
Context: The rubber band is stretched tight.
2. The Trigger (The Snap) 🔫
Do not enter blindly! Look at the IV-RSI :
For Shorts: Wait for the RSI line to turn RED . This confirms that momentum has actually rolled over.
For Longs: Wait for the RSI line to turn GREEN . This confirms that buyers have stepped in.
3. The Filter (The Safety) 🛡️
If price hits your Stop Loss level before the IV-RSI changes color, cancel the trade . This prevents you from shorting a strong trend that is simply "melting up" without volume exhaustion.
Settings & Configuration
RSI Length: Default is 14.
Source Type: VWMA (Volume Weighted) is recommended for institutional analysis.
Bands Multiplier: Default is 2.0 (Standard Deviation). Increasing this to 2.5 will make the "White Dot" extremes rarer and more significant.
Disclaimer
Trading involves a high level of risk and is not suitable for all investors. The content provided here is for educational purposes only and does not constitute financial advice. Past performance is not indicative of future results. The author (abgthecoder) is not responsible for any financial losses incurred from the use of this indicator. Always use proper risk management and never trade with money you cannot afford to lose. This tool is provided "as is" with open source code for the benefit of the trading community.
移动平均线
DEMA Volatility SuperTrend | RakoQuantDEMA Volatility SuperTrend is a clean trend-regime indicator built for volatile markets such as crypto.
It combines a Double Exponential Moving Average (DEMA) baseline with a standard deviation volatility envelope, then applies classic SuperTrend trailing logic to produce persistent bullish and bearish regimes.
This tool is designed for traders who want a smooth but responsive trend structure without relying on ATR alone.
Core Concept
This indicator answers one simple question:
Are we currently in a bullish trend regime or a bearish trend regime?
It does this by building a dynamic volatility corridor around a DEMA baseline and flipping only when price breaks beyond the active band.
How It Works
1. DEMA Baseline (fast + low lag)
A DEMA is used instead of a normal EMA to reduce lag while maintaining smooth trend behavior.
2. Volatility Engine (Standard Deviation)
Volatility bands are created using:
Raw Source Volatility
Classic standard deviation behavior
Residual vs Baseline Volatility
Measures deviations from the DEMA baseline for cleaner regime detection
Band formula:
Upper Band = baseline + multiplier × stdev
Lower Band = baseline − multiplier × stdev
3. SuperTrend Trailing Regime Logic
Instead of flipping every touch, the bands trail using SuperTrend persistence rules:
Bull regime → active lower band acts as support
Bear regime → active upper band acts as resistance
Flips occur only when price breaks beyond the trailing band.
Visual System
Bull regime: Ice-Blue active band
Bear regime: Violet active band
Optional faint inactive bands provide structure
Optional fill highlights the active regime corridor
Optional candle painting matches the regime state instantly
Alerts Included
Bull Flip Alert → regime turns bullish
Bear Flip Alert → regime turns bearish
Perfect for automation or regime-based filtering.
How to Use
✅ Trend filter for swing trading
✅ Regime confirmation layer for systems
✅ Works best on higher timeframes (4H / 1D)
✅ Combine with momentum or breakout triggers for entries
Inputs Summary
DEMA Length → baseline responsiveness
Volatility Length + Multiplier → band width + sensitivity
Volatility Mode → raw vs residual volatility
Flip Source → Close or HL2 for regime switching
Visual toggles → fill, candles, inactive rails
Screenshot Placement
📸 Example chart / screenshot:
Tip: show one bullish flip + one bearish flip with candle painting enabled.
Momentum Adaptive EMA | RakoQuantMomentum Adaptive EMA is a trend-following moving average system designed to dynamically adjust its responsiveness based on market momentum.
Instead of using a fixed smoothing speed like a normal EMA, this indicator becomes fast in strong moves and slow in choppy conditions, producing a cleaner adaptive trend structure.
This version also introduces a secondary POT Moving Average for smooth regime confirmation.
Core Idea
This indicator answers one key question:
Is momentum accelerating enough to justify a faster trend response?
By adapting the EMA’s smoothing factor in real time, the indicator avoids the two classic problems of moving averages:
Lag in strong trends
Whipsaws in sideways markets
How It Works
1. Momentum-Based Adaptivity Engine
The indicator measures momentum using a Rate-of-Change style move:
ROC = current price − price N bars ago
That momentum is normalized by volatility:
Momentum Strength = |ROC| ÷ stdev(ROC)
This produces a clean, scale-independent momentum score.
2. Adaptive EMA (Dynamic Alpha)
Instead of a constant EMA alpha, smoothing is adjusted between:
Alpha Min → slow mode (stable markets)
Alpha Max → fast mode (strong trend markets)
Adaptivity is controlled by:
k (Strength Parameter)
High momentum → EMA reacts faster
Low momentum → EMA smooths more
3. POT Moving Average (Weighted Trend Anchor)
A second moving average is calculated using a Power-Weighted POT MA, where the most recent values receive heavier weight:
Stronger emphasis on recent trend shifts
Smooth confirmation without volatility bands
This creates a clean dual-average regime filter:
Adaptive EMA = fast regime line
POT MA = slower structure anchor
Regime Signals
Trend regime is defined by crossovers:
Bullish regime: Adaptive EMA crosses above POT MA
Bearish regime: Adaptive EMA crosses below POT MA
Optional persistence keeps regimes stable instead of flipping constantly.
Visual System
Bull regime → Ice Blue trend state
Bear regime → Navy trend state
Candle painting optionally matches the active regime
The result is a clean institutional trend overlay with adaptive behavior.
Alerts Included
Bull Break Alert → Adaptive EMA crosses ABOVE POT MA
Bear Break Alert → Adaptive EMA crosses BELOW POT MA
Useful for automation or confirmation systems.
How to Use
✅ Trend filter for directional trading
✅ Adaptive MA replacement for classic EMA systems
✅ Works well on higher timeframes (4H / 1D)
✅ Combine with breakouts, momentum triggers, or volume tools for entries
Inputs Summary
Momentum Length → speed of momentum detection
Normalization Length → volatility scaling window
Alpha Min / Alpha Max → slow vs fast response bounds
Adaptivity Strength (k) → aggressiveness of adaptation
POT Length + Power → smoothing of the confirmation MA
Persistent Regime Toggle → stability vs live switching
Candle Paint Toggle → visual regime clarity
Screenshot Placement
📸 Example chart / screenshot: (insert image here)
Tip: show a strong bull trend + one bearish flip so users understand the adaptive behavior.
CPR OI Toolkit - All in one indicatorThis is experimental indicator which is an extend my pre triple EMA indicator. I have been using this indicator to identify potential entry and exit for commodity market. I had used it for couple of week and it helps.
I would like to share with you. It is meant identify and analyze then plan your trade. I have developed this indicator using Google Antigravity , which is an awesome tool for developing trading indicator and strategies.
My CPR OI tool kit includes following.
Triple EMA
Stochastic - for trend catching
Previous Low/high base trial and visual indication
Price action concepts
Reversion logic.
Visual indication - buy / sell / setup initialization / exit
Visual dashboard.
---
## 🎨 Visual Signal Guide
| Marker | Meaning | Action |
|--------|---------|--------|
| 🔵 Tiny Blue Circle | Stochastic bullish setup START | Wait for EMA + breakout |
| 🟢 Green Triangle UP | **LONG ENTRY** - All conditions met | **ENTER LONG** |
| 🔴 Red Triangle DOWN | **SHORT ENTRY** | **ENTER SHORT** |
| 🟠 Orange Circle | **EXIT** - EMA1/2 cross | **CLOSE POSITION** |
| 💧 Aqua "R" | Mean reversion long | Scalp opportunity |
| 💜 Fuchsia "R" | Mean reversion short | Scalp opportunity |
---
## 💰 Open Interest Interpretation
| Status | Price vs Prev | OI Change | Meaning |
|--------|---------------|-----------|---------|
| **Long Accumulation**🟢 | ↑ | ↑ | Bulls building positions |
| **Short Accumulation**🔴 | ↓ | ↑ | Bears building positions |
| **Short Covering**🟡 | ↑ | ↓ | Bears exiting (bullish) |
| **Long Unwinding**🟠 | ↓ | ↓ | Bulls exiting (bearish) |
---
## 🔔 Alerts (All Enabled by Default)
1. "LONG Signal | Stochastic confirmed | EMA Bullish"
2. "SHORT Signal | Stochastic confirmed | EMA Bearish"
3. "EMA Alignment: BULLISH/BEARISH"
4. "Position CLOSED - Trailing Stop Hit"
---
SMC/ICT: High Prob Signal FINALSMC/ICT: High-Probability Trend Signal This professional-grade indicator combines ICT/SMC concepts with Moving Average momentum. It identifies the Daily Bias using Candle Range Theory and tracks the Midnight Open to define Premium and Discount zones. To minimize noise, it only triggers EMA 9/21 crossover signals when they align with the higher-timeframe trend and institutional pricing levels. It also features a dynamic New Week Opening Gap (NWOG) anchor for structural reference.
Funnelzon Graded Buy and Sell Signals (LITE) MFI MTFFunnelzon Buy and Sell Signals (EMA Zones) – LITE is a lightweight overlay indicator built for scalping and short-term trading. It generates BUY/SELL signals, grades each signal (A+ to F), and provides a clean Confirmation Box that summarizes multi-timeframe context so you can make faster, more structured decisions.
How it works
Signal Engine (LTF)
Signals are triggered using an ATR-based “scalp helper” logic with adjustable sensitivity.
A stop-state system helps reduce repeated or noisy entries.
Signal Scoring & Grades (A+ → F)
When a signal appears, it is evaluated by a context pipeline that considers:
Adaptive momentum/flow (AMF)
ALMA trend alignment
Support/Resistance proximity
Swing structure behavior
Market regime / trend strength (ADX-based)
The result is a score mapped to a grade:
A+ / A = strongest signals
B / C = mixed conditions
D / F = low-quality conditions
Optional Filters
MFI Filter: Helps avoid signals that do not meet Money Flow conditions.
HTF Confirmation (MTF): Uses HTF1 and HTF2 bias. Choose strict filtering or soft alignment.
Confirmation Box (Dashboard)
The box displays:
HTF State: Trend Long / Trend Short / HTF Conflict / Neutral
Market Mode: Trend / Pullback / Conflict
Trade Bias: Long-only / Short-only / Wait
ENTRY NOW? = “YES” when HTF bias and LTF signal align
MFI status + HTF1/HTF2 direction
Optional Structure Tools
EMA overlays: 9 / 12 / 20 / 50 / 100 / 200
Auto Supply/Demand zones (pivot-based, ATR thickness, configurable extension and limits)
Best practices (recommended workflow)
Prefer trading A+ / A signals only.
Trade in the direction of HTF State when possible.
If Market Mode shows PULLBACK or CONFLICT, reduce risk or wait for better alignment.
Use Supply/Demand zones and EMAs for structure (targets, invalidation, and bias).
Important: Confirmation with Stochastic + MACD
This script is a signal + context tool, not a guarantee. To validate signal confirmation, it is strongly recommended to use:
Stochastic Oscillator (momentum/exhaustion confirmation)
MACD (trend momentum and direction confirmation)
Only take trades when the script signal and your confirmation indicators agree.
Alerts
Includes alert conditions for:
Buy Signal
Sell Signal
Any Signal
ENTRY NOW (HTF + LTF aligned)
ENTRY NOW Long / ENTRY NOW Short
Disclaimer
This indicator is for educational purposes and does not constitute financial advice. Always backtest, manage risk, and confirm signals with your own rules.
Cyberpunk GMMA Reactor ProCyberpunk GMMA Reactor Pro
System Concept
Dive into the data stream. Cyberpunk GMMA Reactor Pro is a high-performance visualizer based on the Guppy Multiple Moving Average (GMMA). It transforms market trends into glowing "Digital Ribbons," allowing you to perceive market energy through neon-lit intensities.
This script isn't just about aesthetics; it’s a professional-grade tool designed to identify trend strength, exhaustion, and reversals using 12 layers of Exponential Moving Averages (EMA).
Key Features
・Dual-Stream ribbons:
-Neon Magenta (Short-Term): Represents the "Drones" (traders' sentiment).
-Neon Cyan (Long-Term): Represents the "Mainframe" (investors' foundation).
・Reactor Glow (Dynamic Background): The background pulsates based on the "Spread" between EMA3 and EMA30 relative to volatility (ATR). When the trend accelerates, the reactor glows brighter.
・System Signals: Real-time Golden Cross (System Boot) and Death Cross (System Critical) alerts.
・High-Tech UI: Bilingual settings (English/Japanese) for a seamless global experience.
How to Use
1. Expansion (The Stream): When the ribbons spread apart and the background glows intensely, a strong trend is in progress.
2. Squeeze (The Compression): When all lines converge, the system is "recharging" for the next big breakout.
3. Cross (The Breach): Use the System Boot/Critical signals to identify potential entry and exit points.
システムコンセプト
データの潮流へ。Cyberpunk GMMA Reactor Pro は、グッピー複合移動平均線（GMMA）をベースにした高性能ビジュアライザーです。市場のトレンドを輝く「デジタル・リボン」へと変換し、ネオンの輝きによって相場のエネルギーを直感的に把握できます。
単なる見た目重視のツールではありません。12本の指数平滑移動平均線（EMA）を駆使し、トレンドの強さ、収束、反転を見極めるプロフェッショナル仕様のインジケーターです。
主な機能
・デュアル・ストリーム・リボン：
-ネオンマゼンタ（短期群）: 「ドローン（短期トレーダー）」の心理を反映。
-ネオンシアン（長期群）: 「メインフレーム（長期投資家）」の基盤を反映。
・リアクター・グロウ（背景発光）: EMA3とEMA30の乖離率をATR（ボラティリティ）で計算し、背景が動的に発光。トレンドが加速するほど光が強まります。
・システム・シグナル: ゴールデンクロス（System Boot）とデッドクロス（System Critical）をリアルタイムで表示。
・ハイテクUI: 英語と日本語を併記したバイリンガル設定画面。
トレードへの活用法
1. エクスパンション（拡散）: リボンが広がり、背景が強く発光している時は、強力なトレンドが継続中です。
2. スクイーズ（収束）: 全てのラインが一本に収束し始めたら、次なるブレイクアウトに向けたエネルギー充填のサインです。
3. クロス（突破）: System Boot / Criticalシグナルを参考に、エントリーや利確のタイミングを計ります。
Advanced MTF EMA Analyzer - Real-Time HTF📊 ADVANCED MTF EMA ANALYZER - REAL-TIME HTF
🎯 WHAT IS THIS INDICATOR?
This advanced multi-timeframe EMA indicator displays up to 9 different timeframe EMAs on a single chart with smooth, real-time updating lines. Unlike traditional MTF indicators that show stepped/choppy lines, this analyzer provides fluid, continuously updating EMA lines by calculating them at your current timeframe resolution.
✨ KEY FEATURES
• 9 TIMEFRAME SUPPORT: Track EMAs across 15m, 30m, 1h, 2h, 4h, 6h, 8h, 12h, and 1D
• SMOOTH LINES: No more stepped/choppy higher timeframe lines - every candle updates smoothly
• REAL-TIME CALCULATION: Uses lookahead methodology to provide live HTF data on lower timeframes
• CUSTOMIZABLE EMA PERIOD: Choose any EMA length (default: 200)
• DISTANCE TABLE: Shows exact distance from price to each EMA in percentage terms
• SELECTIVE DISPLAY: Toggle any timeframe on/off individually
• COLOR-CODED: Each timeframe has a unique color for easy identification
🔧 HOW IT WORKS
The indicator fetches close prices from higher timeframes and applies EMA calculation on your current timeframe. For example, when viewing a 5-minute chart:
- 1 hour = 12 candles of 5m data
- 4 hours = 48 candles of 5m data
- Each 5m candle recalculates the EMA, creating smooth, fluid lines
This approach eliminates the traditional "stepped" appearance of higher timeframe indicators while maintaining accurate trend representation.
📋 DASHBOARD INFORMATION
The built-in table displays:
- Current price
- EMA values for each selected timeframe
- Percentage distance from price to each EMA
- Green (above EMA) / Red (below EMA) color coding
🎨 COLOR SCHEME
White: Current Timeframe | Yellow: 15m | Orange: 30m
Blue: 1h | Light Blue: 2h | Purple: 4h
Pink: 6h | Dark Purple: 8h | Dark Orange: 12h
Red: 1 Day
💡 BEST USE CASES
✓ Identifying multi-timeframe trend alignment
✓ Finding dynamic support/resistance levels
✓ Spotting trend strength across different periods
✓ Making better entry/exit decisions based on multiple timeframes
✓ Ideal for 5-minute charts with higher timeframe context
⚠️ DISCLAIMER
This indicator is for educational and informational purposes only. It should not be considered financial advice. Trading involves substantial risk of loss and is not suitable for everyone. Past performance does not guarantee future results. The use of "lookahead" functionality means this indicator may repaint historical values. Always perform your own analysis and consult with a qualified financial advisor before making trading decisions.
═══════════════════════════════════════════════════════════════
👍 DID YOU FIND THIS USEFUL?
If this indicator helps your trading analysis, please consider:
⭐ LIKE this indicator
💬 LEAVE A COMMENT with your feedback
👥 FOLLOW for more quality indicators and updates
📧 CONTACT for suggestions, bug reports, or feature requests
Your support and feedback help improve this tool for the entire community!
═══════════════════════════════════════════════════════════════
📌 VERSION: 1.0
📅 RELEASE: 2026
🔄 UPDATES: Follow for notifications on new features and improvements
Thank you for using Advanced MTF EMA Analyzer!
AUTO FIB PRO - VWAP Bias and Retrace Breakouts (DAX NQ) v6AUTO FIB PRO by funnelzon automatically detects swing points (pivot highs/lows), draws dynamic Fibonacci levels, highlights the key retracement area (0.236–0.618), and prints continuation-style BUY/SELL signals after a retrace. It also includes VWAP + VWAP zone (ATR-based), a configurable trend filter (EMA200 / HTF EMA200 / VWAP / combined “BEST”), session & volatility filters, a CHOP blocker, a top-right “traffic light” status panel, and optional manual R/S zones (R1–R4 & S1–S4) with width presets and background highlighting.
1) Auto Swing → Auto Fibonacci
The script detects swing points using pivot highs/lows.
Once two valid swing points are available (P1 → P2), it plots Fibonacci levels:
0.236 / 0.382 / 0.500 / 0.618 / 0.786 / 1.000
Lines extend to the right and update automatically with new swings.
2) Retracement Box (0.236–0.618)
The yellow retracement box marks the key pullback area between 0.236 and 0.618.
Optional ATR padding can slightly widen the box (helps with “near touches”).
3) VWAP + VWAP Zone + VWAP Bias Label
VWAP line is optional.
VWAP zone is an ATR-based band around VWAP.
Bias label shows: BULL / BEAR / NEUTRAL, placed outside the chart (left/right selectable).
4) Filters (to avoid low-quality market phases)
Session Filter (DAX / NQ sessions in CET)
ATR-Min Filter (blocks low volatility)
CHOP Filter (blocks markets that get “stuck” inside the retracement zone for too long)
5) Signals (Continuation After Retrace)
Default behavior (Continuation ON):
Retracement zone must be touched first (setup becomes “armed”).
Signal triggers only when price breaks out across the box edge:
BUY: crossover above retrace top + bullish candle + filters OK
SELL: crossunder below retrace bottom + bearish candle + filters OK
Alternative (Continuation OFF):
More aggressive signals can trigger already inside the retracement box.
6) Signal Quality Modes
MORE Trades: looser rules, more signals (optional counter-trend allowed)
A+ ONLY: stricter rules (RSI + EMA slope + trend alignment)
7) Traffic-Light Panel (Top Right)
Shows in real time:
Auto preset type (DAX/NQ + Scalp/Swing + FAST/STABLE)
STATUS: TRADE OK / NO TRADE (and the reason)
Direction: LONG / SHORT / WAIT
Selected trend filter mode
VWAP bias
Pivot length
8) Manual Support/Resistance Zones (R1–R4 & S1–S4)
8 zones as price “areas” (boxes), extended left/right in time
Width presets: Narrow / Normal / Wide or Manual (Points/ATR)
Optional background highlighting when price is inside a zone
Key Features
Auto Swing Detection (Pivot High/Low) → builds P1 → P2 swing
Auto Fibonacci Levels: 0.236 / 0.382 / 0.500 / 0.618 / 0.786 / 1.000
Retracement Box: 0.236–0.618 (+ optional ATR padding)
VWAP Line + VWAP Zone (ATR-based)
VWAP Bias Label: BULL / BEAR / NEUTRAL (outside the chart)
Trend Filter Modes: OFF / EMA200 / HTF EMA200 / VWAP / HTF EMA200 + VWAP (BEST)
Trade Quality Modes:
MORE Trades (looser, more signals)
A+ ONLY (stricter: RSI + EMA slope + trend alignment)
Gate Filters:
Session filter (DAX / NQ CET sessions)
ATR-min filter (blocks low volatility)
CHOP filter (blocks extended sideways inside retrace zone)
Traffic Light Panel (Top Right): STATUS, DIR, FILTER, VWAP BIAS, PivotLen
Manual Zones (R1–R4 / S1–S4):
Width presets: Narrow / Normal / Wide (or Manual via Points/ATR)
Optional background highlight when price is inside a zone
Signals (Logic)
Default (Continuation ON):
Setup becomes “armed” after retracement zone touch
Signal triggers only on breakout:
BUY: close crosses above retrace top + bullish candle + filters OK
SELL: close crosses below retrace bottom + bearish candle + filters OK
Continuation OFF: more aggressive signals can trigger already inside the retracement box.
Recommended Setup (Quick Presets)
Clean & Reliable (recommended)
Auto Presets: ON
Mode: AUTO / SCALP (1/5/15)
Auto Fib Mode: STABLE
Quality: A+ ONLY
Continuation: ON
Trend Filter: HTF EMA200 + VWAP (BEST)
Session filter: ON
ATR-min: ON
CHOP filter: ON
More Trades
Auto Fib Mode: FAST
Quality: MORE Trades
Trend Filter: VWAP or EMA200
FAQ (Quick)
Q: Why do I see “NO TRADE” in the panel?
A: One of the gate filters blocks signals (outside session, ATR too low, or CHOP detected).
Q: Why no signals even though price is moving?
A: A valid swing (P1→P2) must exist, retrace zone must be touched (Continuation ON), and trend/quality filters must pass.
Q: What does CHOP mean here?
A: Price stayed inside the retracement zone for too many bars → higher noise → signals disabled until conditions improve.
Q: DAX vs NQ feels different — what should I change first?
A: Start with Market Preset, then adjust VWAP zone ATR mult and CHOP bars limit.
Disclaimer
Educational/analytical tool only. Not financial advice. Use risk management and confirm signals with market context.
Daily 10 & 20 EMA (Shown on All Timeframes)The 10-day EMA is the quicker one. It hugs price closely, reacting fast to every twitch and hesitation. When price respects it, momentum feels alive. When price slices through it, you sense hesitation before it shows up elsewhere.
The 20-day EMA moves with more weight. It doesn’t flinch at noise. It represents the market’s short-term memory, the line price keeps returning to when trends are healthy. Above it, bias feels constructive. Below it, gravity takes over.
Together, they form a rhythm pair:
When the 10 EMA rides above the 20 EMA, the market is leaning forward.
When the 10 EMA sinks below the 20 EMA, momentum is cooling or rolling over.
When price compresses between them, indecision is building energy.
Across all timeframes, they scale like a fractal:
On lower timeframes, they act as tactical guides for entries, pullbacks, and exits.
On higher timeframes, they define structure, trend health, and whether moves are worth trusting.
They don’t predict. They contextualize.
They don’t command. They frame the battlefield
ATR Deviation Sigmoid Oscillator# ATR Sigmoid Volatility Regime Oscillator
## What This Indicator Does
The **ATR Sigmoid Volatility Regime Oscillator** is a volatility-regime detection tool designed to answer a single, critical question:
> *Is the market currently in a low-volatility or high-volatility regime—relative to its own recent behavior?*
Instead of using raw volatility values, this indicator **contextualizes volatility** by comparing the current ATR (Average True Range) to its own historical baseline and then mapping that deviation into a bounded, interpretable scale.
---
## How It Works (Conceptual)
1. **ATR Calculation**
The indicator starts with the standard ATR, which measures market volatility without direction.
2. **Baseline via EMA**
An EMA of ATR is used as a dynamic volatility baseline. This adapts to changing market conditions instead of relying on static thresholds.
3. **Relative Deviation**
The difference between ATR and its EMA represents how "unusual" current volatility is relative to its recent history.
4. **Normalization**
This deviation is normalized using ATR’s own dispersion, ensuring comparability across assets and timeframes.
5. **Sigmoid Transformation (0–100)**
A sigmoid function maps the normalized value into a **bounded 0–100 oscillator**, producing:
* Stability at extremes
* Smooth regime transitions
* No unbounded spikes
---
## How to Read the Oscillator
* **Above 50 (Green)**
High-volatility regime. Momentum strategies, breakout logic, and wider risk parameters tend to perform better.
* **Below 50 (Red)**
Low-volatility regime. Mean-reversion, range trading, and tighter risk controls are generally more appropriate.
* **The 50 Level**
Acts as a *volatility regime boundary*, not a buy/sell signal.
This indicator is **not directional**. It is a *context filter*.
---
## What This Indicator Is Best Used For
* Enabling/disabling strategies based on volatility regime
* Filtering false signals in low-volatility environments
* Position sizing and stop-distance adaptation
* Multi-asset volatility comparison using a common scale
---
## What This Indicator Is NOT
* ❌ Not a buy or sell signal
* ❌ Not a trend indicator
* ❌ Not predictive on its own
It is designed to be used **in combination with price, trend, or momentum logic**.
---
## Disclaimer
This indicator is provided for **educational and informational purposes only**.
It does not constitute financial advice, investment recommendations, or an offer to buy or sell any financial instrument. Trading involves risk, and past performance does not guarantee future results.
You are solely responsible for any trading decisions you make using this tool.
---
## Like This Indicator?
If you find this volatility regime tool useful:
* ⭐ **Add it to your favorites**
* 💬 **Leave a comment or feedback** — suggestions are welcome
* 👤 **Follow for future updates and new quantitative tools**
Your support helps improve and refine this work.
---
*Designed with a quantitative, regime-based approach to market analysis.*
5-SMA Smart PivotDescription
This indicator is designed to identify short-term trend reversals by detecting pivot points in the 5-period Simple Moving Average (SMA).
How It Works
The script monitors the 5-day SMA for specific turning points:
Turn Down (Purple Arrow): Triggers when the SMA shifts from rising/flat to falling.
Turn Up (White Arrow): Triggers when the SMA shifts from falling/flat to rising.
Key Features
Smart Filter (Price Confirmation): Includes an optional "Weak Signal Filter" enabled by default. This ensures an arrow is only plotted if the price actually closes on the correct side of the SMA (e.g., Price must close below the SMA for a Down arrow). This helps reduce noise in choppy markets.
Clean Settings Menu: Unlike standard scripts that clutter your "Style" tab with dozens of checkboxes, this script uses dynamic labeling. This keeps your settings menu clean while still giving you full control.
Fully Customizable:
Arrow Size: Select from "Tiny" to "Huge" via a simple dropdown menu.
Colors: Fully adjustable colors for the SMA line, Up arrows, and Down arrows.
Settings
SMA Length: Default is 5, but can be adjusted to any length.
Filter Weak Signals: Toggle on/off to require price confirmation.
Visual Style: Change line width, colors, and arrow sizes instantly from the Inputs tab.
Usage
This tool is best used for short-term momentum trading to catch immediate shifts in trend direction. It works well when combined with a longer-term trend filter (like the 20/50 SMA) to take signals only in the direction of the major trend.
MTF EMA Traffic Light System Trend Alignment for ScalpersMTF EMA Traffic Light – Trend Bias System
This indicator is designed to help traders quickly identify high-probability trend alignment using multiple timeframes and EMAs.
It analyzes price relative to the 13 EMA and 55 EMA on:
1 Minute
5 Minute
15 Minute
1 Hour
4 Hour
Then it converts that data into a simple Traffic Light system to guide trade decisions.
🚦 How It Works
Each timeframe is classified as:
🟢 BULL – Price above both EMAs
🔴 BEAR – Price below both EMAs
🟡 MIXED – No clear direction
The system focuses on lower-timeframe alignment:
When 1m + 5m + 15m are aligned → Strong setup
When mixed → Caution
When misaligned → Stand aside
🟢 GREEN State (Full Trade Mode)
Triggered when:
✔ 1m, 5m, and 15m are all BULL → Long Bias
✔ 1m, 5m, and 15m are all BEAR → Short Bias
Rules:
Full position size
Trade with trend
Look for EMA pullbacks
Let winners run
🟡 YELLOW State (Caution Mode)
Triggered when:
✔ Lower timeframes are mixed
Rules:
Reduce size
Take quick profits
No holding
Defensive trading
🔴 RED State (No Trade)
Triggered when:
✔ No clear alignment
Rules:
Stay out
Mark key levels
Protect capital
📋 Dashboard Panel
The indicator displays a real-time table showing:
Each timeframe’s bias
Overall market state
Trade rules
This allows you to read market structure in seconds without switching charts.
🎯 Best Use
This tool works best for:
✔ Scalping
✔ Intraday trading
✔ Trend continuation setups
✔ EMA pullback strategies
Recommended for:
Forex
Indices
Gold
Crypto
⚠️ Risk Disclaimer
This indicator is a decision-support tool, not a guarantee of profits.
Always use:
Proper risk management
Stop losses
Personal trade rules
Never risk more than you can afford to lose.
Horizontal EMAs9, 20, 50, 100, 200 EMA's displayed horizontally. Turn each on/off individually displaying on the 15M, 1H, 4H, and 1D time frames.
Ribbon LinesMA Ribbon Lines Indicator
Description
The MA Ribbon Lines indicator creates a visually intuitive moving average ribbon between two customizable moving averages. It plots 5 evenly spaced lines between the two main MAs, forming a gradient ribbon that helps visualize the relationship and convergence/divergence between the moving averages.
Key Features:
Dual Moving Average System: Configure two moving averages with customizable types (EMA, SMA, WMA, etc.), lengths, and sources
Visual Ribbon Display: Shows 5 colored lines between the MAs, creating a gradient effect that makes trend transitions easy to identify
Color-Coded Visualization:
Lines gradually transition from green (#056656) near MA #1 to red (#b22833) near MA #2
Central line in neutral gray (#363a45) for clear separation
Opacity levels highlight proximity to each MA
Global Offset Control: Adjust all lines simultaneously forward or backward in time
Clean Interface: Simple settings with no color inputs for a streamlined user experience
How to Use:
Trend Identification: Ribbon expansion indicates strong trend momentum, while ribbon contraction suggests potential trend change
Support/Resistance: The ribbon lines can act as dynamic support/resistance levels
Crossover Confirmation: Visualize the space between MAs to anticipate crossovers
Default Settings: EMA 50 (green) and EMA 100 (red) with 10-bar forward offset
Best For:
Trend following strategies
Visualizing moving average relationships
Identifying trend strength and potential reversals
Multi-timeframe analysis
The indicator provides a clean, professional visualization of moving average dynamics without cluttering the chart, making it ideal for traders who prefer visual analysis of trend relationships.
Multi EMA (5, 10, 20, 60, 120)Custom Multi-EMA Ribbon (5, 10, 20, 60, 120) - High Visibility
Description:
This script is a powerful, all-in-one trend analysis tool that plots 5 Exponential Moving Averages (EMA) on a single indicator. It is designed to help traders identify trend crossovers, dynamic support/resistance, and market momentum without wasting multiple indicator slots.
Key Features of This Version:
Strategic Periods: Defaulted to 5, 10, 20, 60, and 120.
Focused 10 EMA: The 10-period EMA is highlighted in Red with a thicker line for better visibility of the immediate trend.
Toggle Control: Each line can be independently turned on or off via the settings.
Optimized Performance: Written in Pine Script v6 for maximum efficiency and compatibility.
Color Guide:
⚪ White (5 EMA): Ultra-short-term momentum.
🔴 Red (10 EMA): Core short-term trend (Highlighted).
🟡 Yellow (20 EMA): Standard swing trading baseline.
🔵 Blue (60 EMA): Mid-term trend/Supply & Demand zone.
🟣 Purple (120 EMA): Long-term institutional trend.
How to Use: Look for the interaction between the Red (10 EMA) and the longer-term lines (Blue & Purple) to identify potential trend reversals or continuation signals.
Cruzamento MACD 15 min sauloCruzamento macd nos 15 min, quando acontece o cruzamento o indicador da o sinal de compra e venda.
DonkeyKong 3 minuteTis is a test script for ema movement
Deselect the yellow for quicker entry and exit for 3 minute
EMA 8 Break & Retest ScalperEMA 8 Break & Retest, Candle Close und Wick
BUY / SELL Signale
Scalping
EMA 8 Break & Retest, Candle Close and Wick
BUY / SELL Signals
Scalping
Ichimoku Bounce on Tenkan-Sen by YellowKumaIchimoku Bounce (Long/Short) on Tenkan-Sen by YellowKuma
Pure bounce signals off the Tenkan-sen • No MTF • No noise
🌊 What It Does
This indicator spots high-probability reversal zones where price reacts off the Tenkan-sen (9-period conversion line) — the fastest Ichimoku component acting as dynamic support/resistance.
✅ Long signal → Price bounces up from Tenkan-sen while trading above the cloud
✅ Short signal → Price rejects down from Tenkan-sen while trading below the cloud
✅ Kijun-sen is used only as a trend filter (Tenkan > Kijun for longs / Tenkan < Kijun for shorts) — never as a bounce level
✅ Zero MTF complexity — runs purely on your chart's native timeframe, no repainting
Signals appear as:
🟢 "L" label below the bar → Bullish Tenkan bounce
🔴 "S" label above the bar → Bearish Tenkan bounce
⏱️ Timeframe Matters — A Lot
This strategy shines on higher timeframes and struggles on low ones. Why?
📈 H4 / Daily / Weekly
→ Tenkan-sen aligns with real institutional pivot zones
→ Cloud represents weeks of consensus value — strong trend filter
→ Bounces carry momentum → larger winners, fewer whipsaws
📉 M5 / M15 / M30
→ Tenkan-sen reacts to micro-noise, not structure
→ Cloud too thin — price slices through easily
→ False bounces dominate → shallow moves, poor R:R
💡 Rule of thumb:
• Use H4 for swing entries
• Use Daily for core trend trades
• Keep a Weekly chart open to confirm macro trend (only trade bounces with the Weekly cloud)
• Avoid M15/M30 entirely — signal quality degrades sharply
⚙️ Settings (Simple & Clean)
• Tenkan-sen Period → 9 (standard) — shorter = more sensitive, longer = smoother
• Kijun-sen Period → 26 (standard) — trend filter only
• Senkou Span B Period → 52 (standard) — defines cloud thickness
• Show Long Bounces → Toggle ON/OFF
• Show Short Bounces → Toggle ON/OFF
Cloud colors:
🟢 Green fill → Bullish cloud (Senkou Span A > B)
🔴 Red fill → Bearish cloud (Senkou Span A < B)
🎯 How to Trade the Signals
1️⃣ Wait for confirmation
→ Never enter mid-bar. Wait for candle close beyond the Tenkan-sen.
2️⃣ Check cloud alignment
→ Longs only when price > cloud top
→ Shorts only when price < cloud bottom
3️⃣ Add price action confirmation (optional but recommended)
→ Bullish engulfing / hammer at Tenkan → stronger long signal
→ Bearish engulfing / shooting star at Tenkan → stronger short signal
4️⃣ Risk management
→ Stop-loss: 1–2 pips beyond bounce bar extreme OR 2×ATR(14)
→ Take-profit: Target Kijun-sen (near-term) or opposite cloud boundary (swing)
→ Minimum reward:risk = 1:3
5️⃣ Avoid these situations
→ Choppy markets (Tenkan/Kijun flat, cloud thin)
→ Major news events (FOMC, NFP) — volatility distorts Tenkan touches
→ Bounces within 15 pips of strong horizontal resistance/support against your direction
🔔 Alerts
Built-in alert conditions:
• "Long Bounce" → triggers when green "L" appears
• "Short Bounce" → triggers when red "S" appears
→ Right-click indicator → Add Alert → choose condition
💡 Pro Tips for TradingView Users
✨ Session timing: Avoid first 60 mins of London/NY open — volatility creates false Tenkan touches
✨ Combine with Weekly trend: Disable short signals when price > Weekly cloud (and vice versa)
✨ Less is more: Expect 2–5 high-quality signals per week on H4 — that's normal. Quality > quantity.
⚠️ Important
This is a price-structure tool, not a magic bullet.
Always:
• Respect the trend (trade bounces with the cloud, not against it)
• Use proper position sizing (0.5–1% risk per trade)
• Keep a trading journal — track which bounces worked and why
✨ Bottom Line
Pure. Simple. Effective.
By focusing only on Tenkan-sen bounces — and enforcing strict cloud alignment — this indicator cuts through noise and delivers clean reversal zones where institutions actually place orders.
Works best on H4 and higher.
Add it. Switch to H4. Trade the bounce. 🚀 @YellowKumo
Bollinger Bands + 5 Flexible MA [Ahorrador de Espacio]Description:
This "All-in-One" indicator combines classic Bollinger Bands with up to 5 fully customizable Moving Averages (MA) in a single script.
Designed specifically for traders who want to maximize their technical analysis setup without using up multiple indicator slots (ideal for Basic/Free plan users).
Key Features:
Bollinger Bands: Standard configuration (SMA 20, StdDev 2) with visual contact alerts (Triangles).
5 Independent Moving Averages:
Toggle On/Off: Activate only the lines you need.
Total Flexibility: Choose between SMA (Simple) or EMA (Exponential) for each individual line.
Customization: Full control over length, color, and line thickness.
Clean Interface: MAs 4 and 5 are disabled by default to keep your chart clean, but are ready to be activated in the settings.
How to Use:
Add the indicator to your chart.
Open the Settings (gear icon).
Select which MAs you want to display (e.g., SMA 200 for trend, EMA 9 for scalping).
Use at your own discretion as a confluence tool for trend and volatility.
Note: This script is a visualization tool. The band signals (triangles) indicate price touching the outer bands, which can signify either a potential reversal or trend continuation depending on the market context.
