Rapid Signal Geometry (Multi-TF)Rapid Signal Geometry (RSG)
Structure-Driven Market Geometry & Signal Framework
Rapid Signal Geometry (RSG) is a structure-first trading framework designed to separate directional market geometry from entry execution .
Instead of relying on indicator crossovers or lagging confirmations, RSG evaluates price expansion, volatility boundaries, and candle geometry to determine when the market has structurally shifted.
The indicator is built for traders who prefer fewer, higher-quality signals and a clear, rule-based understanding of market direction across timeframes.
Conceptual Design (Why RSG Exists)
Most signal tools attempt to detect entries directly, which often results in:
Late signals
Repeated signals in chop
Entries taken against higher-timeframe structure
RSG addresses this by decoupling market structure from execution .
The framework operates in two coordinated layers :
• Geometry Layer – defines whether the market is structurally bullish or bearish
• Signal Layer – triggers only at the moment of a confirmed structural transition
This design reduces noise, prevents rapid repeated signals, and keeps execution aligned with actual market behavior rather than indicator coincidence.
How RSG Works (High-Level Mechanics)
1. Geometry Baseline
RSG constructs a smoothed price baseline using RMA combined with adaptive volatility (ATR or Standard Deviation).
This produces dynamic geometry bands that expand and contract with real price behavior instead of static levels.
2. Geometry Direction (Trend State)
The market is considered:
• Bullish when price closes decisively above the upper geometry band
• Bearish when price closes decisively below the lower geometry band
Once a geometry state is established, it remains active until an opposite structural condition is confirmed .
There is no trailing logic and no repainting .
3. Signal Generation
Signals are event-based, not continuous:
• A Buy signal appears only at the first bullish geometry transition
• A Sell signal appears only at the first bearish geometry transition
Signals never appear mid-trend and are designed to mark the start of a new structural leg , not continuation noise.
4. Candle Geometry Levels (Visual Guides)
On each signal candle, RSG can optionally plot:
• The candle’s 50% equilibrium level
• A wick-derived reference level
These are non-predictive visual guides intended for:
Entry refinement
Pullback assessment
Confluence with other price-based tools
Filters & Controls (How Components Work Together)
Cooldown + Re-Qualification Filter
Prevents rapid same-direction signals (“machine-gun effect”).
Within the cooldown window, a new signal is allowed only if price re-qualifies at a structurally better level .
Geometry Direction Filter
When enabled:
• Buy signals are shown only during bullish geometry
• Sell signals are shown only during bearish geometry
This allows RSG to function as a higher-timeframe bias engine while executing on lower timeframes.
Reference Timeframe Geometry
Users can select a higher timeframe to calculate geometry bias while trading on a lower timeframe.
All geometry states are derived from closed reference-timeframe candles , ensuring:
No repainting
No intrabar bias changes
How to Use RSG (Practical Workflow)
Recommended Approach
Select a higher timeframe (4H / Daily / Weekly) to define geometry bias
Trade entries on a lower timeframe (15m or 1hr or D)
Execute only in the direction shown by the geometry state
Example:
If geometry shows LONG → ignore Sell signals
If geometry shows SHORT → ignore Buy signals
Best Timeframes
• Geometry / Bias : 4H, Daily
• Execution : 15m and 1hr
RSG is timeframe-agnostic but performs best when structure and execution are separated .
Important Notes
• No repainting
• Signals are printed only after confirmed candle close
• This is a structural analysis tool, not a prediction system
• Always apply proper risk management
Who RSG Is Designed For
• Traders who prioritize structure over indicators
• Traders seeking clean, rule-based signals
• Price-action and geometry-focused traders
• Traders who prefer confirmation over frequency
Disclaimer
This script is a technical analysis tool and does not constitute financial advice. Trading involves risk. Always test on historical data and apply appropriate risk management.
Update Notes – Alert Reliability Improvement
• Alerts now trigger strictly on confirmed candle close
• Removed intrabar / forming-candle alert behavior
• Implemented forced alert() logic so alerts remain active without manual re-enable
• Signal logic and plotting behavior remain unchanged
Important:
When creating alerts, select “ Any alert() function call ”.
Multitimeframe
Elliott + ICT v2 | Multi-TF Optimizedtry and give me your opinion lets make profit thoghther ! long only !
ZenAlgo - GridOverview and anchoring logic
This indicator constructs a price grid based on a dynamically or manually defined price swing. The entire calculation starts by defining two anchor points that represent a completed directional move. These anchors can be selected in two ways:
Manually, by specifying a start time and an end time, where the indicator uses the candle corresponding to those times and selects either wick highs or lows depending on direction.
Automatically, by detecting significant swing points derived from recent price extremes over a configurable historical window.
The chosen anchors form a reference segment between point A and point B. This segment defines both direction and magnitude of the move. All subsequent levels and zones are derived relative to this segment, ensuring the grid adapts to current market structure rather than using fixed price distances.
Difference from traditional grid and Fibonacci tools
Unlike fixed price grids or standard Fibonacci tools that require manual anchoring and remain static once drawn, this indicator continuously derives its grid from the most relevant completed price swing. Instead of treating levels as independent horizontal prices, all values are expressed as proportions of a single measured move, allowing the grid to automatically rescale and realign as market structure evolves.
Market structure detection and directional context
Before the grid itself is drawn, the script continuously evaluates price structure using swing detection over two different sensitivities. Larger swings establish the dominant structural direction, while smaller swings can optionally be shown for internal context.
Swing highs and swing lows are detected by comparing historical highs and lows over a rolling window.
When price crosses above or below the most recent structural level, the script classifies the event as either a continuation in the same direction or a change in direction.
This structural state determines whether the grid is treated as upward or downward and influences the visual orientation of labels and zones.
This step matters because retracement and extension levels only have meaning when referenced to a clearly defined directional move.
Primary range construction between anchors
Once the anchor points are established, the indicator measures the vertical price distance between them. This distance is treated as a normalized range rather than an absolute value. Every level drawn afterward is positioned as a proportional offset of this range.
If the second anchor is above the first, the grid is considered bullish.
If the second anchor is below the first, the grid is considered bearish.
Colors and label orientation adapt automatically to this direction.
By normalizing the range, the grid remains comparable across assets and timeframes.
Retracement and extension level placement
The indicator plots a predefined set of proportional levels between and beyond the anchor points. Each level represents a fraction or multiple of the original move.
Lower values correspond to deeper retracements toward the origin of the move.
Mid-range values represent partial pullbacks within the move.
Higher values extend beyond the move, projecting potential continuation zones.
Each level is drawn as a horizontal line extending into future bars, accompanied by a label. Labels can be shown either as descriptive names or as raw proportional values, depending on user preference.
Zone construction instead of single levels
Rather than relying only on precise price lines, the indicator groups selected proportions into zones. This reflects the observation that price interaction typically occurs across ranges rather than at exact prices.
A retracement zone highlights an area between two closely spaced proportional levels.
A projection zone marks a continuation region beyond the measured move.
These zones are drawn as shaded areas extending forward in time.
Visual reference points
The indicator explicitly marks the two anchor points on the chart.
Point A represents the origin of the measured move.
Point B represents the completion of that move.
This allows the user to visually verify which price swing the grid is derived from.
How to interpret the values
All plotted levels express proportional relationships to the measured move, not independent price predictions.
Lower proportional values indicate proximity to the start of the move.
Mid-range values represent partial retracements.
Higher values indicate projected continuation areas.
How to best use this indicator
This indicator serves as a structural reference tool rather than a signal generator.
Apply it after a clear directional swing has formed.
Use higher-timeframe context to validate anchor selection.
Combine the grid with price behavior and other contextual tools.
Limitations and disclaimers
This indicator is purely proportional and structure-based.
It does not incorporate volume, volatility regimes, or fundamental data.
Automatic anchoring may differ from subjective swing selection.
Levels and zones represent reference areas, not guaranteed reaction points.
The indicator describes price structure and proportional relationships only.
MTF 200SMA Status Panel (5 Symbols)MTF 200SMA Status Panel (5 Symbols)
This panel displays the current price and 200-period SMA values for up to 5 user-selected symbols across 5 fixed higher-timeframe periods (D1, H4, H1, M30, M15), sorted by price level from highest to lowest.
Key Features:
- User-selectable up to 5 symbols (default: USDJPY, EURUSD, GBPUSD, AUDUSD, USDCHF)
- Displays current price (highlighted in red) and 200SMA for each timeframe
- Automatic high-to-low price sorting across symbols and timeframes
- Lightweight, non-overlay panel (separate from main chart)
- Non-repainting, real-time update on last bar only
Use Cases:
- Instantly see which pairs are above/below their higher-timeframe 200SMA
- Monitor relative strength/weakness among major USD pairs at a glance
- Use as a multi-symbol, multi-timeframe structure filter before entries
- Ideal for traders who respect higher-timeframe bias while watching multiple markets
This indicator works correctly in Bar Replay mode and helps you identify which symbols were structurally aligned at any past point in time.
No trading signals, entry/exit recommendations, or investment advice provided.
This is a reference/visualization tool only. For educational purposes. Use at your own risk.
© katanai_makenai_fx | Samurai Vector Trading
MTF 200SMA Status Panel (5 Symbols)
最大5通貨ペアの現在価格と200期間SMA値を、5つの固定上位時間足（D1、H4、H1、M30、M15）で一括表示し、価格の高い順にソートするパネルです。
主な機能:
- 最大5通貨ペアをユーザー選択可能（デフォルト：USDJPY、EURUSD、GBPUSD、AUDUSD、USDCHF）
- 現在価格（赤色強調）と各時間足の200SMA値を表示
- 価格を高い順に自動ソート → 通貨ペア間の相対強弱が一目でわかる
- 軽量、非オーバーレイ設計（メインのチャートに重ねず別パネル表示）
- 非再描画、最終バーのみリアルタイム更新
用途例:
- 現在価格が上位時間足の200SMAに対して「上か下か」を瞬時に確認
- 主要USDペア間の相対強弱を一画面で把握
- エントリー検討前のマルチシンボル・マルチタイムフレーム構造フィルターとして活用
- 上位時間軸のバイアスを重視しながら複数市場を同時に監視したいトレーダーに最適
このインジケーターはバーリプレイモードでも正しく動作し、
過去の任意の時点において、どの通貨ペアが構造的に整っていたかを把握するのに役立ちます。
本インジケーターはシグナル生成やエントリー/イグジット推奨を行いません。
参考・視覚化ツールとしてのみお使いください。教育目的のみ。投資助言ではありません。使用は自己責任でお願いします。
© katanai_makenai_fx | Samurai Vector Trading
ICT Kill Zones PanelICT Kill Zones Panel - Clean & Simple Trading Sessions Indicator
A simple, objective indicator to identify ICT Kill Zones with real-time status and smart visual highlighting based on New York timezone.
WHAT MAKES IT DIFFERENT:
Traditional indicators clutter charts with dozens of colored boxes from past sessions. This tool provides a clean alternative:
- Real-time information panel showing current active session
- Smart dual-transparency painting: ACTIVE session displays stronger (more visible), historical sessions display softer (less clutter)
- Accurate session timing: Only shows active when session is actually happening
- Mobile-optimized size for phone trading
- Professional interface that doesn't interfere with price action
FEATURES:
- Real-Time Detection: Panel uses actual NYC time (timenow) to show which session is active NOW
- Precise Timing: Sessions activate ONLY during their specific time windows - all zones show inactive outside trading hours
- Smart Visual System: Currently active session has stronger background color, past sessions are softer
- Color Synchronization: Active session color in panel matches chart background color automatically
- Clean Highlighting: Optional background painting with adjustable transparency levels
- Full Customization: 9 panel positions, 4 sizes (Mobile/Small/Normal/Large), fully customizable colors
- All Sessions: Asian (20:00-01:00), London (02:00-05:00), NY AM (08:00-11:00), London Close (10:00-12:00), NY PM (13:00-16:00)
KILL ZONE SCHEDULE (NYC TIME):
1. Asian: 20:00 - 01:00 (5 hours)
2. INACTIVE: 01:00 - 02:00
3. London: 02:00 - 05:00 (3 hours)
4. INACTIVE: 05:00 - 08:00
5. NY AM: 08:00 - 11:00 (3 hours) - overlaps with London Close
6. London Close: 10:00 - 12:00 (2 hours) - overlaps with NY AM
7. INACTIVE: 12:00 - 13:00
8. NY PM: 13:00 - 16:00 (3 hours)
9. INACTIVE: 16:00 - 20:00
During INACTIVE periods, all sessions show as inactive in the panel.
COLOR SYSTEM:
ALL COLORS ARE FULLY CUSTOMIZABLE:
- Each Kill Zone has its own color setting (Asian, London, NY AM, London Close, NY PM)
- Default colors shown in screenshots are just examples
- Active session in panel: displays with its assigned color (e.g., green for NY AM by default)
- Same color appears on chart background with adjustable transparency
- Inactive sessions in panel: display with gray (also customizable)
- Panel background and text colors: fully customizable
- Choose colors that match your chart theme
The green color shown for active sessions in examples is the DEFAULT color for NY AM - you can change it to any color you prefer.
TRANSPARENCY SYSTEM EXPLAINED:
ACTIVE SESSION (happening right now):
- Default 70% transparency = STRONGER/MORE VISIBLE background
- Instantly shows which Kill Zone is unfolding
- Panel row highlights with the session's assigned color
- Chart background displays same color stronger
HISTORICAL SESSIONS (already passed):
- Default 90% transparency = SOFTER/LESS VISIBLE background
- Provides context without visual clutter
- Panel rows show gray (inactive color)
- Both transparency levels fully adjustable in settings
MOBILE OPTIMIZED:
Select "Mobile" panel size for optimal viewing on phone screens - compact layout perfect for smaller displays.
REPAINTING BEHAVIOR:
Panel Status & Colors: Update in real-time as sessions change - panel color switches to match the new active session (intentional for current awareness)
Active Session Highlighting: Adjusts in real-time to show current session stronger on chart
Historical Background Colors: Do NOT repaint - accurately mark when sessions occurred
Session Activation: Sessions activate and deactivate precisely at their scheduled times
CUSTOMIZATION:
- Panel: 9 positions, 4 sizes including Mobile
- Colors: Individual customizable color for each Kill Zone
- Panel Colors: Customizable background, text, and inactive zone colors
- Transparency: Separate controls for active (default 70%) and historical (default 90%) sessions
- Toggle: Show/hide individual zones
- Chart Painting: On/off
HOW TO USE:
1. Add to chart - panel appears top-right
2. Active session displays with its assigned color in panel and stronger on chart
3. Panel shows all zones as inactive during non-trading hours (accurate timing)
4. Panel color automatically changes when new session begins
5. Adjust all colors in settings to match your preferences
6. Adjust transparency settings for optimal visibility
7. Use "Mobile" size for phone trading
BEST FOR:
- ICT traders timing entries during high-liquidity periods
- Smart money concepts (FVG, Order Blocks, Liquidity)
- Traders who want clean charts with essential information
- Traders needing accurate session timing without false signals
- Mobile traders needing compact, clear displays
- Traders who want to customize colors to match their chart theme
TECHNICAL:
- Works on all timeframes
- Built with Pine Script v6
- NYC timezone with automatic DST adjustment
- Precise hour-based session detection
- Lightweight and optimized
- Open source
FEEDBACK WELCOME:
All comments, critiques, and suggestions are welcome! Your input helps improve this tool for the trading community.
Created by ivrank13 for traders who value simplicity, accuracy, and clean charts.
© 2026 ivrank13. All Rights Reserved.
#ICT #KillZones #SmartMoney #ForexSessions #CleanCharts #MobileTrading #CustomColors #AccurateTiming
Trend Signal Pro v2.1 updated## **Trend Signal Pro — Indicator Description**
**Trend Signal Pro** is a rule-based trading indicator designed for traders who want **clear, objective, and timely signals** without noise. It blends **moving average crossovers (14 & 28)** with trend filters to identify **high-probability buy/sell opportunities** across intraday and swing timeframes.
### What it does
* Detects **trend direction** using dual moving averages (14/28)
* Generates **Buy/Sell signals** only when momentum and trend align
* Shows **target levels** and **trend status** on the chart
* Helps avoid **sideways market traps** with built-in filters
* Works smoothly on **1-hour timeframe** and other intervals
### Key Benefits
* Simple, visual signals — no guesswork
* Reduces false entries in consolidation zones
* Suitable for **equity, futures, and commodities**
* Supports disciplined trading with rule-based entries
* Ideal for both **intraday** and **swing traders**
### Best For
Traders who prefer **systematic trading**, follow moving averages, and want a **reliable confirmation tool** before entering a trade.
> Trade with clarity. Follow the trend. Let **Trend Signal Pro** do the filtering.
T.S.T PRO (JakDongJung Collection)Overview
The is a high-performance trend-following strategy designed to capture major market moves while filtering out "noise" and false breakouts. It utilizes a sophisticated Triple Supertrend engine combined with multiple analytical layers—Volume, Momentum (ADX), Volatility (BBW), and Multi-Timeframe (HTF) analysis—to ensure high-probability entries.
Core Entry Logic
1. Triple Supertrend Alignment: The strategy confirms a trend only when three Supertrends with different sensitivities (Fast, Medium, Slow) align in the same direction.
2. Median Filter: To prevent entering at the very top or bottom of a local spike, the price must be positioned relative to the Median Supertrend line.
3. Strategic Filters (Optional):
- Volume Filter: Ensures the move is backed by sufficient market participation.
- ADX Filter: Confirms trend strength to avoid weak or exhausting trends.
- Volatility (BBW) Filter: Uses Bollinger Band Width to ensure the market is in an active expansion phase.
- HTF Trend Filter: Syncs the current timeframe trades with a higher time frame (e.g., Daily) to ensure you are trading with the "Big Picture" trend.
Advanced Money Management
This strategy is built with professional risk management at its core:
- 4 Sizing Modes: Choose between Risk % of Equity, Fixed Capital Amount, % of Equity, or Fixed Quantity.
- Dual Stop-Loss Modes: * Supertrend Mode: Dynamically tracks the Median Supertrend line.
- Fixed Mode: Locks the SL at entry based on ATR multiplier or fixed percentage.
- Execution Flexibility: Choose between "Real-Time Touch" (instant SL) or "On Close" (confirmed bar) for exit execution.
Profit Taking & Protection
- 5-Stage Take Profit: Scale out of positions systematically. Each TP level can be set via ATR Multiplier or Fixed Percentage.
- Automatic Break-Even: Once Take Profit 1 (TP1) is hit, the strategy automatically moves the Stop Loss to the entry price, securing a "risk-free" trade.
Visual Analytics
- Dynamic Visuals: Clearly displays your active Stop Loss, Entry Price, and all 5 Take Profit levels on the chart.
- Performance Table: Includes an integrated Monthly Performance Table to track your strategy's historical returns, drawdown, and consistency directly on the UI.
Recommended Settings
- Timeframes: 1H, 4H, and Daily (D) timeframes are recommended for the best trend-following results.
- Assets: Highly liquid assets such as Major Crypto Pairs (BTC, ETH) and Major Forex pairs.
- Optimization: While the default settings are robust, users are encouraged to adjust the Supertrend factors and ATR multipliers based on the specific volatility of their chosen asset.
Disclaimer
This script is for educational and backtesting purposes only. Past performance does not guarantee future results. Trading involves significant risk, and it is highly recommended to test the strategy thoroughly on a demo account before live deployment.
BTC Cycle Toolkit v1.1.1 (EN) | by Nickxs91Short Description:
A long-term Bitcoin cycle toolkit built around Halvings: historical top/low anchors, current-cycle candidate/lock logic, laddered buy/sell levels with backtesting — plus a Daily-based Pi Cycle Top signal as an optional additional criterion.
Full Description:
What is this?
This script is designed primarily as a Bitcoin cycle visualization & planning toolkit based on Halvings (4-year cycle thesis).
It helps you build a structured plan for buying and selling over time depending on where price might be positioned inside the cycle.
What you get on the chart
Halving markers (vertical lines) + optional labels, countdown and reminders
Fixed historical cycle tops & lows as horizontal reference anchors (~rounded values)
Current cycle (post Halving 2024) auto-detection:
Top candidate (High-since-Halving or Pivot-based)
Robust lock logic for top and low (prevents locking too early)
Candidate vs Locked displayed clearly
Buy/Sell ladder levels
3–10 levels, fully adjustable ranges (drawdown zone / growth zone)
Linear or exponential sizing (“the deeper, the more” / “the higher, the more”)
Labels show price and allocation (optionally estimated amount)
Backtesting strategy
Auto multi-cycle mode or manual single-cycle segments
Optional “institutional-style” filters (trend/RSI/volume)
Pi Cycle Top (Daily-based)
Stable across all timeframes (computed on Daily)
Optional: if Pi triggers, sell the remaining position (“Exit All”)
Important note about Pi Cycle Top
The Pi Cycle Top indicator can be very accurate when it triggers, but it does not trigger in every cycle.
I personally treat it as an additional criterion, not the only definition of a cycle top.
Who is this for?
Long-term BTC investors who think in cycles
Traders/investors who prefer laddered entries/exits instead of all-in/all-out
Anyone who wants a structured way to “map” price behavior around Halvings
Disclaimer
This is a research/visualization tool — not financial advice.
Markets evolve; historical cycles are not guarantees. Backtest results are approximations and include conservative costs.
Roadmap
I plan to continue improving features based on feedback. Suggestions are welcome.
Nice to know: There is a German version (private).
How to use (Quick workflow)
Use 1D timeframe for the cleanest cycle context
Keep preset Conservative (release default) or Custom for own preferences.
Enable Halvings + historical anchors
Choose auto method (Pivot = more stable, HighSinceHalving = faster)
Set level count & ranges (e.g., 7 levels)
Backtest via Auto Multi-Cycle or Manual segment
Optional: enable Pi Cycle “Exit All” as an extra top-risk reduction layer
SN Trader📌 SN Trader – ATR Trailing Stop with EMA Confirmation (Scalping Strategy)
SN Trader is a precision-built ATR-based trailing stop strategy enhanced with EMA 9 & EMA 26 trend confirmation, designed for high-probability intraday and scalping trades, especially effective on XAUUSD (Gold) and other volatile instruments.
This script is a strategy (not just an indicator), meaning it supports backtesting, performance analysis, alerts, and automated trading via webhooks.
🔍 Core Concept
The strategy combines three powerful components:
ATR Trailing Stop (UT Bot logic)
Dynamically adapts to volatility
Acts as both trend filter and dynamic support/resistance
EMA 9 & EMA 26 Trend Confirmation
Filters out low-quality signals
Ensures trades align with short-term momentum
Crossover-Based Entry & Exit Logic
Prevents over-trading
Keeps entries clean and disciplined
This fusion makes SN Trader suitable for manual traders, systematic traders, and algo traders.
📈 Trading Logic (How It Works)
✅ BUY (Long Entry)
A BUY trade is triggered only when:
Price crosses above the ATR trailing stop (UT Buy signal)
EMA 9 crosses above EMA 26
Price is trading above the ATR trailing stop
❌ SELL (Short Entry)
A SELL trade is triggered only when:
Price crosses below the ATR trailing stop (UT Sell signal)
EMA 9 crosses below EMA 26
Price is trading below the ATR trailing stop
🔁 Exit Rules
Long trades close automatically when a Sell signal appears
Short trades close automatically when a Buy signal appears
No repainting logic is used
⚙️ Inputs & Customization
ATR Settings
Key Value – Controls signal sensitivity
Lower value = more trades (aggressive)
Higher value = fewer trades (conservative)
ATR Period – Volatility calculation window
Candle Source
Option to calculate signals using:
Regular candles
Heikin Ashi candles (for smoother trends)
EMA Settings
Default:
EMA Fast: 9
EMA Slow: 26
Can be adjusted to suit different markets or timeframes
🕒 Recommended Usage
Parameter Recommendation
Timeframe 5-Minute (Scalping)
Markets XAUUSD, Indices, Crypto, Forex
Sessions London & New York
Market Type Trending / Volatile
⚠️ Avoid ranging or extremely low-volatility conditions for best results.
📊 Visual Elements
EMA 9 – Green line
EMA 26 – Red line
ATR Trailing Stop – Blue line
BUY / SELL labels on chart
Clean, minimal overlay for fast decision-making
🔔 Alerts & Automation
Because this script is a strategy, it supports:
TradingView Strategy Order Fill Alerts
Webhook alerts for:
MT4 / MT5 bridges
Crypto exchanges
Custom algo execution systems
This makes SN Trader suitable for fully automated trading workflows.
🛑 Risk Disclaimer
This strategy does not include fixed stop-loss or take-profit by default.
Users are strongly encouraged to:
Apply broker-level SL/TP
Avoid high-impact news events
Forward-test before live deployment
Trading involves risk. Past performance does not guarantee future results.
👤 Access & Distribution
This script may be shared as:
Invite-only
Protected source
Redistribution, resale, or modification without permission is prohibited.
⭐ Final Notes
SN Trader is built for traders who value:
Discipline over noise
Confirmation over impulse
Structure over randomness
Whether used for manual scalping, strategy testing, or algo execution, this script provides a robust and professional trading framework.
TPC-Buying and Selling areasTPC - Buying and Selling Areas
Open-source multi-timeframe indicator that automatically detects and displays Supply (resistance) and Demand (support) zones based on swing structure, along with Fair Value Gaps (FVGs) for imbalance visualization. Supports up to two higher timeframes (MTF) for Supply/Demand + optional current-chart or custom timeframe FVGs, with mitigation tracking, alerts, and a dashboard for FVG stats.
Overview
This tool helps identify key price areas where institutional buying/selling pressure may have accumulated (Supply/Demand zones) and inefficiencies/imbalances in price delivery (Fair Value Gaps).
It plots:
•Demand zones (potential support/buy areas) in green tones
•Supply zones (potential resistance/sell areas) in red tones
•Bullish/Bearish FVGs as filled or line areas (with dynamic or fixed extension options)
•A simple FVG dashboard showing count and mitigation percentage
Zones mitigate (disappear or mark as filled) when price closes/wicks through them. Designed for clean charts with configurable visibility, box pooling, and alerts on new zones or FVG events.
How It Works (Conceptual)
•Supply & Demand Zones
•Uses pivot-based swing highs/lows from one or two user-selectable higher timeframes (or chart timeframe).
•Detects structure breaks (e.g., higher highs/lows, lower highs/lows) near recent ATR range to form zones.
•Zones drawn as extendable boxes with timeframe label, customizable borders/text.
•Mitigation: Zones removed or marked when price breaches them (close or extreme/wick, configurable globally or per TF).
•Only shows recent zones (user-defined "show last N") and cleans up on lower timeframes if desired.
•Fair Value Gaps (FVGs)
•Detects 3-candle imbalances where price gaps aggressively (low > high for bullish, high < low for bearish, with optional size threshold).
•Plots as semi-transparent boxes (fixed extend) or dynamic fills that adjust with price.
•Tracks mitigation (when price fills the gap) and optionally draws dashed mitigation lines.
•Shows unmitigated recent FVGs as lines + dashboard stats (total count, % mitigated for bull/bear).
•Multi-timeframe logic uses request.security() for higher TFs, with careful handling for display on lower charts.
See the code for full pivot detection, array management, mitigation loops, and FVG conditions.
How to Use
•Best on volatile/liquid markets (crypto, forex, indices, futures) across intraday to daily timeframes.
•Use Demand zones (green) as potential long entries or support flips when price approaches from above.
•Use Supply zones (red) as potential short entries or resistance when price approaches from below.
•FVGs highlight inefficiencies: bullish FVGs often act as magnets/pullbacks in uptrends; bearish in downtrends.
•Combine with higher-timeframe bias (e.g., show HTF zones on LTF chart) for confluence.
•Alerts fire on: new demand/supply zone, new bullish/bearish FVG, or FVG mitigation.
•Keep "Show only on lower timeframes" enabled to avoid clutter on HTF charts.
•Adjust "Box Size" (pool) if you hit max_boxes limit on very long histories.
Settings
General Settings
•Hide all Demand / Supply zones
•Show S&D only on lower TFs
•S&D Box Size (pool limit, default 80)
•Mitigate on Close or Wick/Extreme
Timeframe 1 & Timeframe 2 (identical groups)
•Set to chart timeframe (or custom)
•Show Demand/Supply
•Alerts for new zones
•Timeframe multiplier + period (Min/Hour/Day/Week/Month)
•Swing Length for pivots
•Border type/width, text size/color
•Demand/Supply colors
•Show last N zones per type
FVG Settings
•Threshold % (min gap size) or Auto
•Unmitigated levels to show
•Mitigation levels (dashed lines)
•FVG Timeframe (blank = chart)
FVG Style
•Extend bars
•Dynamic fill (adjusts with price)
•Bullish/Bearish colors
FVG Dashboard
•Show dashboard
•Location (Top Right etc.)
•Text size
Notes / Limitations
•Non-repainting after bar close (uses confirmed pivots/security data).
•Heavy on boxes/lines — increase pool size carefully (TradingView limits apply).
•FVGs can fill quickly in ranging markets; use with structure/context.
•Always backtest and combine with your analysis — not financial advice, trading carries risk.
•Open-source: feel free to fork, improve, or learn from it.
Volume O59 Elite QuantVolume O59 Elite Quant is a volume-based market analysis indicator designed to identify significant changes in trading activity and visualize momentum conditions directly on the chart.
The indicator compares the current bar volume with the previous bar volume using user-defined percentage thresholds. Signals are generated only when volume behavior is confirmed by candle direction:
Volume increase on bullish candles
Volume increase on bearish candles
Volume decrease on bearish candles
These conditions help highlight situations where price movement is supported by abnormal volume behavior rather than price action alone.
In addition to volume signals, the script includes an RSI momentum calculation that dynamically colors price bars:
Bars are colored when momentum reaches overbought levels
Bars are colored differently when momentum reaches oversold levels
Neutral conditions remain unchanged
This visual approach allows faster interpretation of momentum pressure without adding extra indicators to the chart.
The indicator also supports multi-symbol scanning. Users can define a list of symbols and analyze them on a selectable timeframe (such as intraday or higher timeframes). When qualifying volume conditions are detected, results are displayed in an on-chart table showing the symbol name and signal direction.
The table position can be adjusted on the chart, and calculations are performed efficiently on the latest bar to reduce visual clutter.
This tool is intended for analytical and educational purposes, helping users observe volume behavior, momentum conditions, and relative activity across multiple instruments within a single chart environment.
Important Notice:
This indicator does not generate buy or sell signals.
It is for market observation, analysis, and educational purposes only.
Users should not make trading decisions based solely on this tool.
Always combine it with other analysis methods, proper risk management, and independent research.
Visual elements such as bar coloring and on‑chart tables are informational only and do not imply trading recommendations.
Saptx Trading Time Ranges v2Saptx – Trading Time Ranges is a session-based market timing indicator designed for traders who focus on specific intraday trading windows rather than constant screen time.
The indicator highlights predefined key trading times using vertical ranges and reference lines, allowing traders to quickly identify when to actively look for trade setups during live trading, backtesting, or TradingView Replay Mode.
Unlike many session indicators, this tool is specifically engineered to work reliably in Replay Mode without auto-scale or zoom distortions.
Once a trading window has ended, its range automatically freezes to the true High and Low of that session, providing clean and stable historical reference levels.
────────────────────
CORE FEATURES
────────────────────
• Session-based trading time ranges
• Automatic High & Low range detection
• Ranges freeze after the session window ends
• Clean and non-intrusive chart visuals
• Replay and backtesting optimized logic
• No auto-scale or zoom distortion issues
────────────────────
SESSION WINDOWS
────────────────────
• Frankfurt Open
• London Open
• MMM1
• MMM2
• New York Open
• New York Trap
• Market Closing
────────────────────
BACKTEST & REPLAY
────────────────────
• Displays previous, current, and next trading day
• Fast navigation to key trading windows in Replay Mode
• Designed for efficient historical trade review
• Stable behavior while scrolling and zooming the chart
────────────────────
CUSTOMIZATION
────────────────────
• Adjustable UTC offset (Winter / Summer time support)
• Custom colors and transparency for ranges and lines
• Clean session labels with optional visibility
• Optional next-session countdown timer
────────────────────
IMPORTANT NOTE
────────────────────
This indicator does NOT generate trade signals.
It is a visual timing and structural tool intended to support discretionary and session-based trading strategies.
────────────────────
RECOMMENDED MARKETS & TIMEFRAMES
────────────────────
• Forex (EUR/USD, GBP/USD, DXY, etc.)
• Intraday timeframes (M5, M15, H1)
Finanja Fib Zones📊 Finanja Fib Zones :: Study Most of the stock related things in this website
sites.google.com
YouTube :: Like Share ,Subscribe ,Comment on Youtube for Users guide
www.youtube.com
This indicator provides essential trading signals and market analysis tools to help with your trading decisions.
🌟 Advanced Version Available!
Upgrade to the Pro version for enhanced features:
Advanced signal filtering
Custom alert systems
Additional features
Exclusive trading tools
🔗 Get Pro Version: sites.google.com
💬 Questions? Comment on our YouTube channel for details
Note: This is the basic/free version. For full features and enhanced performance, consider the Advanced Pro version available on our website.
NTR Alpha Pro (SMC & Risk Manager)
Unlock the Secrets of Market Makers with a Data-Driven Proprietary System.
NTR Alpha Pro is a high-performance, all-in-one trading ecosystem designed for professional traders who demand precision, clarity, and discipline. Built on advanced Institutional Flow Logic, this system deciphers complex market data into actionable visual zones and real-time analytics.
Powered by the latest Pine Script™ v6 engine, NTR Alpha Pro delivers institutional-grade insights without cluttering your chart with traditional lagging indicators.
yashashreeenterprises.in
t.me
whatsapp.com
🛡️ THE CORE PILLARS OF NTR ALPHA PRO
1. Smart Institutional Zones (Proprietary Logic)
Stop guessing where the "Big Players" are active. Our algorithm automatically identifies high-probability Accumulation and Distribution Zones.
Dynamic Zone Flipping: Recognizes when market sentiment shifts and converts old zones into new points of interest.
Intelligent Zone Merging: Uses a unique overlap algorithm to consolidate data, giving you the cleanest possible view of high-interest price levels.
2. Central Intelligence Dashboard
A comprehensive command center that monitors market health in real-time across multiple layers.
Multi-Layer Trend Matrix: Analyzes high-timeframe structural health to ensure you are always aligned with the dominant market force.
Precision Entry Engine: A proprietary "Confirmation Matrix" that filters out market noise, showing you exactly when momentum and volume are in your favor.
Market Flow Index: Monitors the intensity of buying and selling interest, distinguishing between true accumulation and low-interest retail movements.
3. Professional Risk & Capital Management
The most advanced risk engine ever built into a TradingView tool. Survival is the key to profit.
Automated Position Sizing: Instantly calculates your exact Quantity or Lots based on your specific capital and risk appetite.
Universal Currency Support: Seamlessly handles INR (₹), USD ($), and EUR (€) calculations.
Volatility-Adjusted Safeguards: Automatically calculates precise Exit/Stop levels based on current market intensity, protecting you from sudden spikes.
4. Global Market Session Tracker
Stay ahead of global volatility by tracking the opening and overlapping of major world financial hubs, integrated directly into your local timezone.
🎯 STRATEGIC ADVANTAGES
No Technical Overload: We have hidden the complex mathematics. You only see what matters: Zones, Trend, and Risk.
Institutional Alignment: Designed to follow the "Smart Money" footprints rather than lagging retail signals.
Universal Application: Highly effective for Intraday, Scalping, and Swing trading across Equities, Forex, and Digital Assets.
🔔 PROPRIETARY ALERT SYSTEM
Stay connected to the market without staring at the screen. Get notified for:
Zone Interaction: Instant alerts when price enters a high-probability institutional area.
Confirmed Structural Entry: Alerts triggered only when the system confirms a valid trade setup.
#InstitutionalTrading #MarketStructure #ProTrader #PriceAction #TradingEdge #RiskManagement #IntradayStrategy #SmartMoney #TradingIntelligence #NiftyPro #BankNifty #ProfessionalTrading
⚠️ ACCESS & LICENSE
NTR Alpha Pro is an Invite-Only Premium Script.
To secure your private license and join the elite circle of data-driven traders,
contact us:
🌐 Website: yashashreeenterprises.in
📩 Telegram/Direct Message: t.me
Note: This system uses proprietary calculation methods. Access is strictly controlled to maintain the edge for our users.
OFFICIAL DISCLAIMER: NTR ALPHA PRO
1. Financial Risk Warning
Trading financial instruments (including Stocks, Forex, Futures, and Cryptocurrencies) involves a high level of risk and may not be suitable for all investors. The high degree of leverage available can work against you as well as for you. Before deciding to trade, you should carefully consider your investment objectives, level of experience, and risk appetite. There is a possibility that you could sustain a loss of some or all of your initial investment; therefore, do not invest money that you cannot afford to lose.
2. Not Financial Advice
The NTR Alpha Pro indicator and all associated content are provided for educational and informational purposes only. The proprietary logic, analytics, and automated zones generated by this tool do not constitute financial, investment, or trading advice. Any trades you place based on the signals or data provided by this system are taken at your own risk.
3. Accuracy and Performance
While NTR Alpha Pro is built using advanced data-driven algorithms, past performance is not indicative of future results. No trading system can guarantee a 100% win rate or profit. The financial markets are unpredictable, and various factors (including news events, market volatility, and liquidity) can affect the accuracy of the system's output.
4. Proprietary Intelligence
NTR Alpha Pro utilizes a unique, proprietary calculation engine. The system is designed to provide an "edge" by analyzing institutional market flow, but it should be used as one of many tools in a comprehensive trading plan. Users are encouraged to perform their own due diligence and technical analysis.
5. Limitation of Liability
By using this script, you agree that Yashashree Enterprises (the developers) shall not be held liable for any direct or indirect financial losses, damages, or emotional distress resulting from the use of NTR Alpha Pro. You are solely responsible for your trading decisions and capital management.
6. Individual Results
Individual results will vary based on the trader’s discipline, psychological mindset, and execution speed. Trading requires patience and a strict adherence to risk management protocols.
ATR Impulse Reversal Traffic-Light + RSI Overlay (Normalised)ATR Impulse Reversal Traffic-Light + RSI Overlay (Normalised)
Short Title
Impulse TL + RSI (Norm)
Description (use this exactly)
What this indicator does
This indicator is a calm, context-gated reversal oscillator designed to reduce noise and cognitive overload.
It highlights potential reversal conditions only when price is stretched and momentum shows signs of turning.
The goal is not frequent signals, but clear decision states.
How it works (logic overview)
Stretch Band Gate (Location)
Price must be stretched below a lower ATR band (EMA ± ATR). If price is not stretched, the indicator remains neutral.
Oversold Context
ATR-normalised momentum must have reached an oversold condition within a recent lookback window.
Reversal Timing (Momentum)
Momentum is analysed for early turning behaviour and confirmed reversals.
Traffic-Light Colours
Grey → Ignore (no stretch and/or no oversold context)
Red → Stretched + oversold, momentum still falling
Orange → Momentum turning up (early warning)
Green → Reversal confirmed (signal-line cross or zero cross)
An optional GREEN Hold is included to reduce flicker and visual noise.
RSI Overlay
RSI is plotted normalised to the oscillator scale, allowing it to sit directly on top of the impulse bars for visual confluence.
RSI is not used in the traffic-light logic and is purely informational.
Suggested Use
Best suited for 4H swing trading
Use GREEN states when price remains stretched below the band
Can be paired with a higher-timeframe trend filter if desired (not included)
Repainting & Disclaimer
This script uses only current and historical bar data and does not use security().
Values may update on the realtime bar before close, which is normal TradingView behaviour.
This indicator is provided for educational purposes only and is not financial advice.
Ict Core //@bajgos.nqFLOW IS THE GOAT
## ## Key Features
**Author: bajgos.nq //discord**
### ### 1. Key Market Open Levels
The indicator tracks and plots horizontal lines for significant market opening times across various timeframes.
- **Custom Key Opens**: Supports up to seven user-defined daily timestamps (e.g., 8:30, 9:30, 10:00) with individual toggles, custom colors, and unique labels.
- **Higher Timeframe (HTF) Opens**: Automatically plots current and previous levels for Daily (DO/PDO), Weekly (WO/PWO), Monthly (MO/PMO), Quarterly (QO/PQO), and Yearly (YO/PYO) opens.
- **Intersection Confluence Logic**: A specialized algorithm that identifies when multiple timeframe opens coincide at the same price level. It dynamically updates the label to show all overlapping opens, such as "DO / WO / MO" or "PDO / PMO".
- **Lookback & Visual Control**: Users can define a lookback period (up to 20 days) for historical lines and adjust the label/line distance to the right of the current bar.
### ### 2. Session Tracking & Asia "Vodo"
Provides automated visual boxes and levels for major trading sessions and "Kill Zones" (KZ).
- **Institutional Sessions**: Visualizes London (lokz), New York AM, New York PM, and Asia (askz) sessions.
- **Dynamic Range Visuals**: Sessions are drawn with "legs" that connect the session high/low range to the price action for clear visual reference.
- **Asia Range + Vodo Levels**: Beyond standard session highs and lows, this module plots specific **"Vodo" Fibonacci-style deviations**. These include fixed offsets at 0.225, 0.25, and 0.272, with an optional 0.35 deviation toggle for both upper and lower expansions.
### ### 3. Wick Theory & Quadrant Levels
This feature identifies pivot highs and lows to highlight price "wicks" as potential institutional reaction zones.
- **Wick Detection**: Uses a customizable "Wick Aggression" length to identify pivot points.
- **Mitigation Logic**: Areas can be set to "mitigate" (disappear) once price retraces into the 50% midpoint of the wick.
- **Quadrant Analysis**: Displays 25%, 50%, and 75% levels within a detected wick to pinpoint precise internal institutional levels.
- **Future Extension**: Wick boxes and quadrant lines are extended into the future by a user-defined bar count.
### ### 4. New Week Opening Gaps (NWOG)
The indicator detects and tracks the physical price gaps created between the previous week's close and the new week's open.
- **Visual Tracking**: Displays a user-defined number of the most recent weekly gaps on the chart.
- **Gap Anatomy**: Each gap includes visual levels for the Gap Top, Gap Bottom, and the Midline (Consequent Encroachment).
### ### 5. SDM Time Window Highlight
The **SDM** feature serves as a specialized **time window highlight** designed to mark specific institutional periods.
- **Visual Zones**: Creates a vertical highlight for specific time windows, such as 9:30 AM to 11:00 AM New York Time.
- **Infinite Vertical Span**: These highlights use a "practically infinite" vertical span, ensuring the highlight remains visible across all price levels regardless of market volatility.
- **History Management**: Automatically manages a history of these windows based on a "Maximum Days Lookback" setting to prevent chart clutter.
### ### 6. Technical Utilities & Customization
- **GMT Offset**: Includes a GMT offset input to align key market opens with specific broker or local time settings.
- **Global Visual Settings**: Users can customize line widths, label sizes, and colors for all session boxes and timeframe opens.
- **Multi-Timeframe Security**: Utilizes `request.security` with `lookahead_on` to ensure accurate and reliable historical data for higher timeframe opens.
Liqudity Magnets [Zofesu]Liquidity Magnets is a high-precision institutional-grade tool designed to identify where large market participants place their orders. Instead of looking at basic support and resistance, this indicator focuses on Liquidation Levels and Stop-Loss cluster s, which act as "magnets" for price action.
🧠 The Concept
Markets move from one pocket of liquidity to another. Retail traders often place their stop-losses just above or below recent Swing Highs/Lows. Professional players and algorithms target these areas to fill their large orders (Stop-hunting) .
This indicator uses a Multi-Timeframe (MTF) approach to detect these critical zones based on leverage psychology:
🧲 Yellow Lines (4%) : Near-term liquidity/stop-loss clusters. Common targets for intraday sweeps.
💰 Red/Green Lines (10%): Major liquidation zones. These represent areas where high-leverage positions (10x) face forced liquidations, often leading to massive trend exhaustion and reversals.
🛠️ How it works
📊 MTF Liquidity Projection: The indicator automatically projects levels from a higher timeframe (Default: 4h) to ensure you are looking at significant market structure.
🎯 Filtered Stop-Run Signals (▲/▼): Grey triangles appear only when the price successfully "sweeps" a high/low AND penetrates deep enough into the liquidity pool. This filters out market noise.
🌑 Stealth Bar Coloring: Candles turn black/dark when a sweep is in progress, providing a clear visual cue that the market is currently "hunting" liquidity.
⚙️ Settings Guide
🕒 Select TF: Choose the anchor timeframe for magnets (Recommended: 240 for 4h).
🔍 Lookback: Sets the period for detecting the most relevant Swing Highs and Lows.
📏 Line Length: Controls how many bars the magnet lines extend into the future.
📈 Signal Sensitivity %: * 0%: Shows every minor sweep.
100%: Only triggers if price reaches the 4% magnet line exactly.
🎨 Color Settings: Fully customizable colors to fit any chart theme (Dark/Light).
💡 Trading Strategy
For the best results, look for the "Sweep & Reject" play:
1. Price enters a Magnet Line (Yellow or Red/Green).
2. A Stop-Run Triangle appears.
3. Wait for the price to reject the level and close back inside the previous range.
⚠️ Note
This script uses dark bar-coloring for sweep detection. If you are using a Dark Theme, ensure your candle borders are visible or adjust the Barcolor settings in the script inputs. On TF-H4 you can also use H1, you will see the channel in which the price moves and hits the lines, it is recommended to watch green and red there. Good use on titles like gold, silver - significant movements. Experiment.
For any questions or setup assistance, feel free to check my profile signature or better send me a private message here on TV!
SMC Elite🦁 The Philosophy: Quality Over Quantity
Unlike standard Smart Money Concepts (SMC) indicators that clutter the chart with hundreds of retrospective levels, SMC Elite is built on the proprietary Elite Logic Filtering Algorithm. This script is designed to solve the "analysis paralysis" problem by strictly filtering Order Blocks and FVGs based on Institutional Order Flow logic, not just candlestick patterns.
🛡️ Technical Integrity & Specifications
Technical Specification: This framework consists of over 3,500 lines of original Pine Script code. It is built as a modular system to ensure high performance and calculation precision. Due to the complexity of the integrated Risk Management Engine and the Multi-Step Validation Logic, this script is published as closed-source to protect over a year of proprietary R&D.
Why this is NOT a Mashup: While it utilizes standard concepts (OB/FVG), the underlying code does not rely on public libraries or 'copy-paste' functions. Every detection routine—from the Wick-to-Body ratio filter for liquidity sweeps to the Internal Market Structure engine—has been coded from the ground up to ensure synchronization and eliminate the lag often found in combined public scripts.
🛠️ Algorithmic Logic (Elite Logic Engine)
1. Order Blocks (OB) - The "Scorecard" System
The core innovation is not just detecting an engulfing candle, but validating the Institutional Intent behind it. The script uses a graded validation system:
A. Volume & Momentum Validation: Standard scripts simply look for Open < Close. Our algorithm calculates the Relative Volume and Body-to-Wick Ratio.
Logic: If an "Order Block" has a small body and huge wicks, it is rejected. We require significant displacement (Body > 60% of Range) to confirm institutional presence.
B. The "Freshness" Simulation (Smart Mitigation): Most indicators repaint or fail to detect immediate tests.
Algorithm: The script simulates a "limit order" placed at the OB open. It then scans future candles. If the very next candle (Candle 1) immediately touches the zone, the zone is marked as Mitigated instantly and hidden. This prevents the "Ghost Zones" problem where you wait for a level that is already dead.
C. Tier 1 (A+ Setup) Criteria: A zone is only promoted to Tier 1 (Solid Color) if it creates a "Trinity Setup":
Liquidity Sweep: Logic checks if Low < Low before the move.
Displacement: Logic verifies that an FVG exists within the next 2 candles.
Structure Break: Logic confirms a BOS occurred within N bars.
2. Fair Value Gaps (FVG) - Adaptive Filtering
We moved beyond simple "Gap Detection". The script applies Volatility Normalization.
ATR Filter: GapSize > 0.5 * ATR(14). Small gaps in low volatility are ignored.
Fill Percentage: If a candle closes > 50% into the gap, it is considered "Invalidated" based on the Zone Preservation theory.
50% Zone Mode: Visually renders only the Premium half of the gap (Entry to CE), reducing chart noise by 50%.
3. Smart Structure (BOS/CHoCH) with ATR Filter
Fractal highs/lows are often noisy. We implemented an ATR Volatility Filter for structure mapping.
Logic: A swing point is only valid if the price moves away by at least 0.3 * ATR. This filters out "Micro-Structure" that traps retail traders, leaving only the "Macro-Structure" relevant to banks.
4. Advanced Money Management (Real-Time Engine)
This feature transforms the indicator into a complete trading desk tool.
Dynamic Calculation: The script utilizes dynamic volatility inputs (ATR) and real-time account metrics to calculate optimal position sizing, accounting for contract specifications across various asset classes (Forex, Metals, Indices).
Live Updates: As price moves, the Lot Size recommendation updates instantly based on the distance between the Entry and the invalidation point (SL).
5. CISD (Change In State of Delivery) - The Entry Trigger
This is not a standard pattern. It captures the exact moment the algorithmic "Delivery State" shifts.
Detection: It identifies the specific candle that raided liquidity (The "Raid Candle").
Trigger: It waits for a candle body close below the Raid Candle's low. This is the surest sign that the Stop Run is complete and the Reversal has begun.
Usage: Use this for entry after price taps a Tier 1 OB.
⚙️ How to Use This Script
Identify the Trend: Use the colored "Market Structure" lines (BOS/CHoCH) to determine the bias (Blue = Bullish, Red = Bearish).
Wait for Tier 1 Zones: Look for darker/solid Order Blocks. These are your high-probability Areas of Interest (POI).
Wait for Inducement (Optional but Recommended): Ensure price has swept a nearby low/high (marked as IDM) before reaching your POI.
Execute & Manage:
Use the Lot Size displayed on the zone label (calculated via the Risk Engine).
Place your Stop Loss at the suggested SL Line.
Target the opposing liquidity (PDH/PDL) or the next structural High/Low.
⚠️ Disclaimer
This script is a tool for analysis, not a signal service. The "Elite Logic" is intended to filter noise, but all trading involves risk. Understand the concepts of IDM and Liquidity before trading with real capital.
Golden Cross Over (GCO)Golden Cross Over Version 3.0 give you ability to use three different cross overs as to your choice...
Gives GCO - Bullish and Bearish - both...
Hope you take full use of the indicator...
PTT Moving Average DeviationPTT Moving Average Deviation
Identify statistically significant price extensions with precision.
This indicator measures how far price has deviated from its moving average as a percentage, with dynamic standard deviation bands to highlight extreme conditions.
📊 What It Shows
Blue Line: Percentage deviation from the moving average (0% = price equals MA)
Red Bands: ±1 standard deviation levels - statistically significant extremes
Zero Line: The moving average baseline
🔑 Key Features
Multi-Timeframe: View daily/weekly deviation even on intraday charts (30m, 1H, 4H, Daily, Weekly options)
Standard Deviation Bands: Adapts to each asset's volatility
Status Display: Real-time deviation status
Built-in Alerts: Get notified when price enters extreme zones
Customizable: MA type (SMA/EMA/WMA), length, colors, and std dev multiplier
📈 How To Interpret
When price moves beyond the standard deviation bands, it signals a statistically rare event:
Mean Reversion: Price is stretched and may snap back toward the average
Trend Initiation: A powerful trend may be starting - the "new normal" is forming
Context matters. Use with price action and market structure to determine which scenario is playing out.
⚙️ Default Settings
200-period SMA (classic institutional benchmark)
Daily timeframe (works on any chart)
±1 standard deviation bands
Part of the PTT (Plan Trigger Trade) indicator suite.
Multi-Timeframe EMA LevelsThis indicator will plot 2 different EMA's from 4 different timeframes on your chart. It displays as horizontal dotted lines so does not clutter your chart with loads of MA's. The lines are labeled with timeframe, EMA length and the level value. Levels update in real time.
If you are trading key levels or ma's this plots everything for you on one single chart.
PRICE GRAVITY (LFX) | LFXPRICE GRAVITY (MTF) | LFX is a professional-grade multi-timeframe indicator built to expose where price is forced to react.
Markets don’t move randomly — price is constantly pulled back to high-liquidity gravity zones. This script identifies those zones with precision, helping traders catch clean pullbacks, sharp reversals, and high-probability continuations before the crowd reacts.
This is not a lagging indicator and not meant for beginners looking for easy signals. It is designed for serious traders who understand structure, imbalance, and price behavior.
Why PRICE GRAVITY?
• Reveals hidden price attraction zones
• Multi-Timeframe confirmation = stronger bias
• Filters low-quality trades
• Perfect for Gold (XAUUSD), Indices, Forex & Crypto
• Built for disciplined intraday & swing traders
How Professionals Use It:
• Trade reactions at gravity zones, not random entries
• Align lower timeframe entries with higher timeframe gravity
• Combine with structure & liquidity sweeps
• Let price come to you — don’t chase
Important:
This tool does NOT generate buy/sell signals. It gives you location, not prediction. Skill + patience = results.
⚠️ Educational & analytical tool only. No financial advice.
