Intraday Buy/Sell/Average Zones by Chaitu50cIntraday Buy/Sell/Average Zones by chaitu50c
Timeframe:
Tested on the 5-minute chart.
Recommended timeframe: 5-minute
What it does
This indicator marks intraday Buy (green) and Sell (red) zones made by strong close-confirmed breakouts. These zones act as support/resistance. If price later closes through a zone, the zone changes color from that bar forward (support ↔ resistance). It can flip more than once.
How zones form
Single breakout: an opposite-type candle closes beyond the previous candle’s high/low.
Double breakout: a base candle, then two opposite-type candles, and the second one closes beyond the base high/low.
Zone size
Buy zone: from the combo lowest low up to the nearest open/close of the combo.
Sell zone: from the combo highest high down to the nearest open/close of the combo.
Color shift (optional)
If price closes through a zone, it flips color at that bar and behaves as the other side (support ↔ resistance). Flips can happen again later.
Overlap control
When a new zone overlaps an existing same-color zone in the same session, choose:
Merge (combine), or
Suppress (ignore the new one).
Flipped zones use their current color for this.
Right edge & session
All zones extend to the right (your offset). Detection is limited to your chosen session, and you can show only the last N sessions.
---
How to trade (simple)
A) Initial breakout trade
When a new zone forms, that breakout itself can be a trade idea in the breakout direction, The stoploss will be the zone.
B) Zone breakout trade (flip)
If price later closes out of a zone and it changes color, that breakout is another trade opportunity in the new direction.
C) Retrace & average trade
When price retests a zone, wait for a confirmation candle in the zone’s favor
— bullish close for a green zone, bearish close for a red zone — then average entries inside/near the zone.
Place stops just beyond the opposite edge of the zone.
If the zone flips color, stop averaging; bias changed.
---
Key settings
Breakout type: Single and/or Double
Confirm on Close: strict mode (no intrabar preview) or allow intrabar preview that auto-removes if fail
Color Shift on Breaks: on/off
Same-Type Overlap: Merge/Suppress
Session, Sessions to Display, Right Offset, Colors, Max Zones
Reminder: Best results on the 5-minute timeframe (tested and recommended).
支撑和阻力
Multipower Entry SecretMultipower Entry Secret indicator is designed to be the ultimate trading companion for traders of all skill levels—especially those who struggle with decision-making due to unclear or overwhelming signals. Unlike conventional trading systems cluttered with too many lines and confusing alerts, this indicator provides a clear, adaptive, and actionable guide for market entries and exits.
Key Points:
Clear Buy/Sell/Wait Signals:
The script dynamically analyzes price action, candle patterns, volume, trend strength, and higher time frame context. This means it gives you “Buy,” “Sell,” or “Wait” signals based on real, meaningful market information—filtering out the noise and weak trades.
Multi-Timeframe Adaptive Analysis:
It synchronizes signals between higher and current timeframes, ensuring you get the most reliable direction—reducing the risk of getting caught in fake moves or sudden reversals.
Automatic Support, Resistance & Liquidity Zones:
Key levels like support, resistance, and liquidity zones are auto-detected and displayed directly on the chart, helping you make precise decisions without manual drawing.
Real-Time Dashboard:
All relevant information, such as trend strength, market intent, volume sentiment, and the reason behind each signal, is neatly summarized in a dashboard—making monitoring effortless and intuitive.
Customizable & Beginner-Friendly:
Whether you’re a newcomer wanting straightforward guidance or a professional needing advanced customization, the indicator offers flexible options to adjust analysis depth, timeframes, sensitivity, and more.
Visual & Clutter-Free:
The design ensures that your chart remains clean and readable, showing only the most important information. This minimizes mental overload and allows for instant decision-making.
Who Will Benefit?
Beginners who want to learn trading logic, avoid common traps, and see the exact reason behind every signal.
Advanced traders who require adaptive multi-timeframe analytics, fast execution, and stress-free monitoring.
Anyone who wants to save screen time, reduce analysis paralysis, and have more confidence in every trade they take.
1. No Indicator Clutter
Intent:
Many traders get confused by charts filled with too many indicators and signals. This often leads to hesitation, missed trades, or taking random, risky trades.
In this Indicator:
You get a clean and clutter-free chart. Only the most important buy/sell/wait signals and relevant support/resistance/liquidity levels are shown. These update automatically, removing the “overload” and keeping your focus sharp, so your decision-making is faster and stress-free.
2. Exact Entry Guide
Intent:
Traders often struggle with entry timing, leading to FOMO (fear of missing out) or getting trapped in sudden market reversals.
In this Indicator:
The system uses powerful adaptive logic to filter out weak signals and only highlight the strongest market moves. This not only prevents you from entering late or on noise, but also helps avoid losses from false breakouts or whipsaws. You get actionable suggestions—when to enter, when to hold back—so your entries are high-conviction and disciplined.
3. HTF+LTF Logic: Multitimeframe Sync Analysis
Intent:
Most losing trades happen when you act only on the short-term chart, ignoring the bigger market trend.
In this Indicator:
Signals are based on both the current chart timeframe (LTF) and a higher (HTF, like hourly/daily) timeframe. The indicator synchronizes trend direction, momentum, and structure across both levels, quickly adapting to show you when both are aligned. This filtering results in “only trade with the bigger trend”—dramatically increasing your win rate and market confidence.
4. Auto Support/Resistance & Liquidity Zones
Intent:
Drawing support/resistance and liquidity zones manually is time-consuming and error-prone, especially for beginners.
In this Indicator:
The system automatically identifies and plots the most crucial support/resistance levels and liquidity zones on your chart. This is based on adaptive, real-time price and volume analysis. These zones highlight where major institutional activity, trap setups, or real breakouts/reversals are most likely, removing guesswork and giving you a clear reference for entries, exits, and stop placements.
5. Clear Action/Direction
Intent:
Traders need certainty—what does the market want right now? Most indicators are vague.
In this Indicator:
Your dashboard always displays in plain words (like “BUY”, “SELL”, or “WAIT”) what action makes sense in the current market phase. Whether it’s a bull trap, volume spike, wick reversal, or exhaustion—it’s interpreted and explained clearly. No more confusion—just direct, real-time advice.
6. For Everyone (Beginner to Pro)
Intent:
Most advanced indicators are overwhelming for new traders; simple ones lack depth for professionals.
In this Indicator:
It is simple enough for a beginner—just add it to the chart and instantly see what action to consider. At the same time, it includes advanced adaptive analysis, multi-timeframe logic, and customizable settings so professional traders can fine-tune it for their strategies.
7. Ideal Usage and User Benefits
Instant Decision Support:
Whenever you’re unsure about a trade, just look at the indicator’s suggestion for clarity.
Entry Learning:
Beginners get real-time “practice” by not only seeing signals, but also the reason behind them—improving your chart reading and market understanding.
Screen Time & Stress Reduction:
Clear, relevant information only; no noise, less fatigue, faster decisions.
Makes Trading Confident & Simple:
The smart dashboard splits actionable levels (HTF, LTF, action) so you never miss a move, avoid traps, and stay aligned with high-probability trades.
8. Advanced Input Settings (Smart Customization)
Explained with Examples:
Enable Wick Analysis:
Finds candles with strong upper/lower wicks (signs of rejection/buying/selling force), alerting you to hidden reversals and protecting from FOMO entries.
Enable Absorption:
Detects when heavy order flow from one side is “absorbed” by the other (shows where institutional buyers/sellers are likely active, helps spot fake breakouts).
Enable Unusual Breakout:
Highlights real breakouts—large volatility plus high volume—so you catch genuine moves and avoid random spikes.
Enable Range/Expansion:
Smartly flags sudden range expansions—when the market goes from quiet to volatile—so you can act at the start of real trends.
Trend Bar Lookback:
Adjusts how many bars/candles are used in trend calculations. Short (fast trades, more signals), long (more reliability, fewer whipsaws).
Bull/Bear Bars for Strong Trend Min:
Sets how many candles in a row must support a trend before calling it “strong”—prevents flipping signals, keeps you disciplined.
Volume MA Length:
Lets you adjust how many bars back volume is averaged—fine-tune for your asset and trading style for best volume signals.
Swing Lookback Bars:
Set how many bars to use for swing high/low detection—short (quick swing levels), long (stronger support/resistance).
HTF (Bias Window):
Decide which higher timeframe the indicator should use for big-picture market mood. Adjustable for any style (scalp, swing, position).
Adaptive Lookback (HTF):
Choose how much HTF history is used for detecting major extremes/zones. Quick adjust for more/less sensitivity.
Show Support/Resistance, Liquidity Zones, Trendlines:
Toggle them on/off instantly per your needs—keeps your chart relevant and tailored.
9. Live Dashboard Sections Explained
Intent HTF:
Shows if the bigger timeframe currently has a Bullish, Bearish, or Neutral (“Chop”) intent, based on strict volume/price body calculations. Instant clarity—no more guessing on trend bias.
HTF Bias:
Clear message about which side (buy/sell/sideways) controls the market on the higher timeframe, so you always trade with the “big money.”
Chart Action:
The central action for the current bar—Whether to Buy, Sell, or Wait—calculated from all indicator logic, not just one rule.
TrendScore Long/Short:
See how many candles in your chosen window were bullish or bearish, at a glance. Instantly gauge market momentum.
Reason (WHY):
Every time a signal appears, the “reason” cell tells you the primary logic (breakout, wick, strong trend, etc.) behind it. Full transparency and learning—never trade blindly.
Strong Trend:
Shows if the market is currently in a powerful trend or not—helping you avoid choppy, risky entries.
HTF Vol/Body:
Displays current higher timeframe volume and candle body %—helping spot when big players are active for higher probability trades.
Volume Sentiment:
A real-time analysis of market psychology (strong bullish/bearish, neutral)—making your decision-making much more confident.
10. Smart and User-Friendly Design
Multi-timeframe Adaptive:
All calculations can now be drawn from your choice of higher or current timeframe, ensuring signals are filtered by larger market context.
Flexible Table Position:
You can set the live dashboard/summary anywhere on the chart for best visibility.
Refined Zone Visualization:
Liquidity and order blocks are visually highlighted, auto-tuning for your settings and always cleaning up to stay clutter-free.
Multi-Lingual & Beginner Accessible:
With Hindi and simple English support, descriptions and settings are accessible for a wide audience—anyone can start using powerful trading logic with zero language barrier.
Efficient Labels & Clear Reasoning:
Signal labels and reasons are shown/removed dynamically so your chart stays informative, not messy.
Every detail of this indicator is designed to make trading both simpler and smarter—helping you avoid the common pitfalls, learn real price action, stay in sync with the market’s true mood, and act with discipline for higher consistency and confidence.
This indicator makes professional-grade market analysis accessible to everyone. It’s your trusted assistant for making smarter, faster, and more profitable trading decisions—providing not just signals, but also the “why” behind every action. With auto-adaptive logic, clear visuals, and strong focus on real trading needs, it lets you focus on capturing the moves that matter—every single time.
Set & Forget – AlexG Club – ChecklistThe Set & Forget – AlexG Club – Checklist is built to help traders apply the well-known Set and Forget strategy from the famous AlexG (falexg) and the G-Club community.
This indicator displays a clear, on-chart checklist table of trading confluences. Each confluence adds to a total score, making it easier to objectively evaluate whether a trade setup aligns with the AlexG / G-Club strategy.
✅ Features:
• Customizable confluence checklist (trend alignment, S/R levels, candlestick signals, momentum, etc.)
• Automatic scoring system to calculate the Set & Forget readiness of a trade
• Clean table visualization on your chart
• Flexible thresholds — you decide how many confluences equal a strong setup
🚀 How to Use:
Add the indicator to your chart.
Adjust the confluences to reflect your own AlexG / G-Club inspired checklist.
Use the total score to validate trades before you pull the trigger.
⚠️ Disclaimer: This indicator is for educational purposes only. It is not financial advice and does not guarantee profitability. Always manage your risk and test before using live.
Pivots Levels @ Sumith.KVThe Pivot Levels helps to identify the Pivot Levels on different Timeframes. The Pivot Levels (Support & Resistance) are displayed as lines as well as tables.
Option is provided to Customize the Lines & Tables.
Also Alerts are integrated which will help us to notify on crossing each Pivot Levels.
This Support & Resistance indicator Strategy can be used across Stocks, Options, Crypto, Commodities etc.
EMA Support & ResistanceEducational Purpose only
This indicator combines VWAP, multiple Exponential Moving Averages (EMA 20,/VWAP ), Support and Resistance
VWAP (Volume Weighted Average Price) helps identify fair value and intraday bias.
EMA 20 act as dynamic support and resistance levels for short, medium, and long-term trends.
CPR (Central Pivot Range) is calculated from the previous day’s High, Low, and Close. It provides intraday reference zones S1/S2/S3 & R1/R2/R3 that traders use to gauge market direction and trend strength.
This tool is built for educational purposes only — to help visualize common support & resistance zones and learn how VWAP + EMAs + S/R interact in live markets. It is not financial advice and should not be used as a standalone trading system.
Blueprint Signals ProBlueprint Signals Pro is an advanced, all-in-one trading indicator designed for TradingView, built to provide high-quality buy/sell signals across various markets including cryptocurrencies, U.S. stocks, Indian indices, forex, and more. 📈 It leverages a proprietary ATR-based trailing stop mechanism combined with AI-optimized profiles for different trading styles (scalping, intraday, swing, and position trading) to generate reliable signals on bar close.
Key Features:
📊 Market Optimization: Tailored options for specific markets like Cryptocurrency (high volatility, 24/7 trading), U.S. Stocks (regulated exchanges, standard hours), Indian Indices (local dynamics like NIFTY), and Forex (high liquidity, global influences) to customize parameters and enhance signal accuracy.
🎨 Theme & Palette Customization: Supports dark/light chart themes with multiple color palettes for visual appeal.
🤖 Trading Profiles: Pre-built AI profiles like "Edge Signal", "Flash Signal", "Trend Rider", etc., tailored to your timeframe and style.
🔍 Signal Filters: Bullish/Bearish modes to focus on one-sided signals, with adjustable candle opacity.
🛡️ Support/Resistance Zones: Dynamic S/R levels with auto-adjusting lookback and wick warning markers for potential reversals.
⚠️ Swing Pattern Failure (SPF): Detects failure patterns with volume and wick filters for early reversal alerts.
🚨 Warnings: Proximity and wick-touch alerts on the trailing stop to signal momentum loss or trend challenges.
💡 Premium/Discount Zones: Neon-style P&D zones with glow effects to identify overvalued/undervalued areas.
📉 Custom Moving Averages: Up to 3 configurable MAs (EMA/SMA/WMA/HMA) with theme-based colors.
⚙️ Core Parameters: Manual/auto-tuning for scaling factor, period, min move filter, and anti-chop sensitivity.
⭐ Confidence Rating: Scores signals (Weak/Moderate/Strong) based on trend, S/R proximity, and volume.
🎯 SL/TP Levels: Displays stop loss (ATR trail, swing, or fixed ATR) and multiple take profits with R:R ratios, extendable lines, and zone fills. Additionally, clearly shows captured points/pips (e.g., +50 pts) and potential profit in points/pips/₹ for each level, making risk-reward analysis straightforward and visible on the chart.
🖥️ Display Options: Toggle trailing stop, text on signals, and more.
📅 Dashboard: Multi-timeframe overview with trend intelligence (using ADX), confidence, and candle timer.
🔔 Alerts: Configurable for buy/sell signals with detailed messages.
Usage Guidelines:
Select your market, theme, and trading style from the inputs.
Use on any timeframe; auto-adjusts for optimal performance.
Signals are confirmed on bar close to avoid repainting.
Combine with your risk management; backtest thoroughly.
This indicator is for educational and informational purposes only. Past performance is not indicative of future results. Trade at your own risk. © 2025 Raza | Blueprint Signals. All Rights Reserved.
Price Action By ProfitAlgo.io Price Action Alerts combined with the BackEnd Order Matrix and TrendSync Tool Kit.
ProfitAlgo.io Price Action
A companion tool to the Backend Order Matrix and TrendSync, this indicator helps visualize trade direction with A/B/C/D retracement lines that align with fib retracement levels which can react as a BIG BOUNCE RETEST ENTRY, multi-timeframe support/resistance, and an RSI filter. It’s designed as a guide for bias confirmation, not a signal to enter every mark. Combine it with the Backend Order Matrix (for liquidity/stop-hunt zones) and TrendSync (for trend confirmation) to better spot where stop hunts become opportunities and price action aligns with higher-probability setups.
Price is shown bullish and the retracement lines are defined by the dotted lines. You may color the lines to your discretion to be able to quickly differentiate the different retracments lines on the chart aligning to Fib levels for possible early entries. Here you can anticipate for price to have a significant reaction with placing your stop loss being the Buy-Side Liquidity as show below. Though the BackEnd Order Matrix liquidity can be swept so keep in mind being more patient to wait for the liquidity sweep as the point entry can serve as another approach to minimize risk exposure.
Exiting at the SellSide Liquidity where price can have an reaction to the downside.
Vise Versa for bearish trend following retracement entires.
⚙️ Settings Guide – ProfitAlgo.io Price Action
Retracement Line (A/B/C/D) → Shows potential price action setups where price can have a strong reaction. Having Price above the lines- price can be shown to buy at these levels. If Price is below the lines and the trend is showing bearish the price can be shown to retest and sell at these levels.
Multi-Timeframe S/R → Plots higher-timeframe support and resistance levels for added context.
RSI Filter → Filters entries when RSI conditions are extreme, helping avoid false setups.
Top-Down Analysis (TDA) → Aligns lower-timeframe entries with higher-timeframe structure.
📌 Tip: The TrendSync's trend detection visual representation Together with Backend Order Matrix (for liquidity zones/stop hunts) helps Traders understand trend based trading with liquidity stop hunts which can be used as a entry model that does not happen as many times as the Price Action Tool does for early entries signals. If you would like to read more on how the The BackEnd Order Matrix and TrendSync Simulation Tool works. Feel free to read the articles below.
The How to Use The BackEnd Order Matrix?
The How to Use The TrendSync Simulation Tool?
Premarket Hi/Lo + Prior Day O/C LevelsPremarket Hi/Lo + Prior Day O/C (today only) shows four clear reference levels for the current regular trading session: the Premarket High and Premarket Low (taken from a user-defined premarket window, 04:00–09:30 by default) and Yesterday’s 09:30 Open and 15:59 Close (sourced from the 1-minute feed for accuracy). The premarket levels “lock” at the opening bell so they don’t move for the rest of the day. All four lines are displayed only during today’s regular hours to keep the chart focused. Small right-edge labels and an optional top-right mini-table show the exact values at a glance.
This indicator is designed to give immediate context without technical jargon. The premarket high/low summarize where price traveled before the bell; the prior-day open/close summarize where the last session began and ended. Checking whether price is above or below these markers helps you quickly judge strength or weakness and anticipate where price may pause, bounce, or break. Typical uses include watching for a clean break and hold above Premarket High (often bullish), a break and hold below Premarket Low (often bearish), drift back toward Prior Day Close after a gap (a common “magnet”), and flips around Prior Day Open that can lead to continuation.
Setup: Turn on Extended Hours in TradingView so premarket bars are visible (Chart Settings → Symbol → Extended Hours). Apply the indicator to any intraday timeframe. In Inputs, you can change the premarket window to match your market, adjust colors and line widths, and toggle the floating labels and the mini-table. Times use the chart’s exchange time (for US stocks, Eastern Time).
Notes and limits: Lines show only for today’s session (default 09:30–16:00). The script looks at the previous calendar day for “prior day,” so values may be empty after weekends or holidays when markets were closed. If your instrument uses different regular hours or you trade futures/crypto, adjust the premarket session in Inputs and—if needed—edit the regular-hours window in code to match. If your data source does not include premarket, the premarket lines will be blank.
Best practice: The first 15–30 minutes after the open are where these levels have the most impact. Reactions are more meaningful when a line aligns with another tool you use (e.g., VWAP or your opening range). If price does not react clearly at a line, avoid forcing a trade.
Continuous Partial Buying Signals v7.1🇬🇧 English Description: Continuous Partial Buying Signals v7.1
This indicator is built on a long-term accumulation philosophy , not a traditional buy-sell strategy. Its main purpose is to systematically increase your position in an asset you believe in by identifying significant price drops as buying opportunities. It is a tool designed for long-term investors who want to automate the "buy the dip" or "Dollar Cost Averaging (DCA)" mindset.
How It Works
The logic follows a simple but powerful cycle: Find a Peak -> Wait for a Drop -> Signal a Buy -> Wait for a New Peak.
1. Identifies a Significant Peak: Instead of reacting to minor price spikes, the indicator looks back over a user-defined period (e.g., the last 200 candles) to find the highest price. This stable peak (marked with an orange circle) becomes the reference point for the current cycle.
2. Waits for a Pullback: The indicator then calculates the percentage drop from this locked-in peak.
3. Generates Buy Signals: When the price drops by the percentages you define (e.g., -5% and -10%), it plots a "BUY" signal on the chart. It will only signal once per level within the same cycle.
4. Resets the Cycle: This is the key. If the price recovers and establishes a new significant peak higher than the previous one, the entire cycle resets. The new peak becomes the new reference, and the buy signals are re-armed, allowing the indicator to perpetually find new buying opportunities in a rising market.
How to Get the Most Out of This Indicator
* Timeframe: It is highly recommended to use this on higher timeframes (4H, Daily, Weekly) to align with its long-term accumulation philosophy.
* Peak Lookback Period:
* Higher values (200, 300): Create more stable and less frequent signals. Ideal for long-term, patient investors.
* Lower values (50, 100): More sensitive to recent price action, resulting in more frequent cycles.
* Drop Percentages: Adjust these based on the asset's volatility.
* Volatile assets (Crypto): Consider larger percentages like 10%, 20%.
* Less volatile assets (Stocks, Indices): Smaller percentages like 3%, 5%, 8% might be more appropriate.
This indicator is a tool for disciplined, emotion-free accumulation. It does not provide sell signals.
B3 – VIX + Breadth + SR + Projeção 14dA comprehensive technical analysis tool that combines volatility proxies (HV, ATR, BB Width, composite VolIndex), market breadth (internal and multi-timeframe), pivot-based support/resistance with strength and confluence, and a 14-day linear regression projection with confidence bands. Designed to provide a holistic view of trend, risk, and key price levels for swing and medium-term trading decisions.
VDMM v2 by SupersonicFXHey everyone. This is my first indicator.
It displays the (V)olumen (D)elta (M)is (M)atch candles which represents major levels on different TF.
You can adjust the settings, but in my opinion on default the indicator works perfectly fine.
I use this indicator for two forex pairs (GU/EU) ONLY! Not tested on stocks, crypto or other forex pairs.
Enjoy
Time ZonesThis indicator plots Horizontal lines for specific time on the chart as per the time selected and then trade accordingly
Channel Breakout Gold For 15m 1hChannel Breakout – ATR Buffer + RR Fix
This strategy is designed for Gold (XAUUSD) on 15m and 1h timeframes, based on the “Channel Breakout” concept.
When price closes above or below the channel (highest/lowest over a given length), a Buy or Sell signal is triggered with automatic TP and SL placement.
Key Features:
✅ Uses ATR buffer to filter out false breakouts
✅ Customizable Risk:Reward Ratio (RR) for precise trade management
✅ Stop Loss automatically placed at the opposite channel for strong protection
✅ Real-time plotting of TP and SL lines for better visualization
✅ Works well for both Day Trading and Swing Trading
Best suited for traders who want:
- Clear breakout entries
- Robust risk management
- A versatile strategy adaptable to multiple timeframes
⚠️ Note:
- This strategy is for educational and testing purposes only, not financial advice.
- Always backtest/forward test and adjust parameters to fit your trading style and instrument.
================================================
กลยุทธ์ Channel Breakout – ATR Buffer + RR Fix
กลยุทธ์นี้ออกแบบมาเพื่อใช้กับทองคำ (XAUUSD) ใน Timeframe 15m และ 1h โดยอิงตามหลักการ “Channel Breakout”
เมื่อราคาเบรกกรอบบนหรือล่างของราคาย้อนหลัง (Channel Length) จะเกิดสัญญาณ Buy หรือ Sell ตามทิศทาง พร้อมกำหนดจุด TP และ SL อัตโนมัติ
คุณสมบัติเด่น:
✅ ใช้ ATR เป็น Buffer เพื่อลดสัญญาณหลอก (False Breakout)
✅ กำหนด Risk:Reward Ratio (RR) ได้เอง ทำให้ควบคุมกำไร/ขาดทุนต่อไม้ได้ชัดเจน
✅ SL ถูกตั้งที่กรอบตรงข้าม (Opposite Channel) เพื่อให้ป้องกันการกลับตัว
✅ แสดงเส้น TP/SL บนกราฟแบบ Real-Time ให้ผู้ใช้งานเห็นจุดออกชัดเจน
✅ ใช้งานได้ทั้ง Day Trade และ Swing Trade
เหมาะสำหรับเทรดเดอร์ที่ต้องการ:
- ระบบเบรกกรอบที่ชัดเจน
- การจัดการความเสี่ยงที่แม่นยำ
- กลยุทธ์ที่สามารถปรับใช้ได้กับหลาย Timeframe
⚠️ หมายเหตุ:
- กลยุทธ์นี้เป็นเครื่องมือช่วยวิเคราะห์ ไม่ใช่คำแนะนำการลงทุนโดยตรง
- ควรทดสอบ (Backtest/Forward test) และปรับค่าพารามิเตอร์ให้เหมาะกับสไตล์การเทรดและสินทรัพย์ที่ใช้งาน
LBM-Strategy Engine Pro: The Ultimate Confluence IndicatorOverview
Welcome to the Strategy Engine Pro , the ultimate confluence indicator designed for traders who demand precision and full control over their trading signals. This is not just an indicator; it is a complete, customizable strategy-building framework.
It seamlessly integrates three powerful concepts into a single, intuitive tool:
Advanced Moving Average Trend Analysis to define the market context.
An intelligent Support & Resistance Cycle Engine to identify key price levels.
A flexible 10-rule Strategy Builder that lets you design, test, and refine your own entry signals with surgical precision.
Core Features
1. Advanced Moving Average Trend Analysis
The indicator plots 5 fully configurable Moving Averages (MAs). You can choose the Period and Type (SMA, EMA, WMA, HMA, RMA) for each one. But its true power lies in its unique color-coding system, which analyzes the slope and momentum of each MA, not just its price.
MA Color Code:
Green: The MA is in a strong, confirmed uptrend.
Red: The MA is in a strong, confirmed downtrend.
Yellow: The MA is flat or in a transitional (sideways) phase.
This provides an instant visual snapshot of the market trend across five different timeframes.
2. Support & Resistance Cycle Engine
Forget simple pivot points. This indicator incorporates a sophisticated engine that identifies and plots significant "Master Cycle" levels on your chart.
Anchored Levels: These S/R lines are persistent and intelligent. When a key resistance level is broken, it automatically "flips" and becomes the new anchored support level, and vice-versa. This accurately maps out the market's structural progression.
The Strategy Builder: Your Personal Trading Lab
This is the heart of the indicator. You have 10 sequential rules that allow you to define the exact conditions for a Buy signal. The Sell signal is generated as the logical, symmetrical opposite.
For each rule, you can configure:
Source A & Source B: Choose from a wide range of data points:
Price values: Close, Open, High, Low.
Previous candle values: Close Before, Open Before, etc.
Moving Average values: MA 1 through MA 5.
MA Trend Colors: MA 1 Color, MA 2 Color Before, etc.
Operator: Define the comparison logic:
Standard: >, <, >=, <=
Events: Crossover, Crossunder
Color Logic: Is Color, Is NOT Color, Turned Color, Ceased to be Color
Important Note on Sell Signals: Sell conditions are designed to be the symmetrical opposite of the buy conditions you create.
If Buy is Close > MA 1, Sell will be Close < MA 1.
If Buy is MA 1 Color Is Green, Sell will be MA 1 Color Is Red.
If Buy is MA 1 Color Turned Green, Sell will be MA 1 Color Turned Red.
This ensures your sell strategy mirrors the logic of your buy strategy, preventing the "inverse problem" of getting sell signals on every candle that isn't a buy signal.
Mastering the Connectors: ( ) AND and ( ) OR
The true power of the Strategy Builder lies in its connectors, which allow you to create complex, multi-layered logic. The connector on a rule defines how it connects to the next active rule.
AND & OR: These work as you'd expect, creating a continuous chain of conditions.
Rule 1 (AND) & Rule 2 is evaluated as (R1 AND R2).
( ) OR (The Group Separator): This is your most powerful tool. It acts like closing a parenthesis in an equation. It finalizes the current group of rules and connects it to the
next group with a big "OR".
Example: (R1 AND R2) OR (R3 AND R4)
This creates two possible paths for a signal.
- Rule 1: Condition R1, Connector AND
- Rule 2: Condition R2, Connector ( ) OR <-- This closes the first group and links to the next with OR.
- Rule 3: Condition R3, Connector AND
- Rule 4: Condition R4
( ) AND (The Super-Filter): This allows you to create a "master" condition that must be true in addition to other complex conditions.
Example: (R1 OR R2) AND (R3 OR R4)
This requires a condition from the first group and a condition from the second group to be true.
- Rule 1: Condition R1, Connector OR
- Rule 2: Condition R2, Connector ( ) AND <-- This closes the first OR group and links to the next with AND.
- Rule 3: Condition R3, Connector OR
- Rule 4: Condition R4
By strategically combining these connectors, you can build any logical trading scenario you can imagine. We look forward to seeing the powerful strategies the community creates with this engine.
ICT 00:00, 08:30, 09:30 & 13:30 Opens (NY) — Prior-Day HistoryICT 00:00, 08:30, 09:30 & 13:30 Opens (NY)
This is a derivative of ALPHAICTRADER’s open-source script, republished under the MPL-2.0 with clear attribution and documented changes. It plots four New-York–anchored intraday reference levels—0000, 0830, 0930, 1330—as short, right-padded stubs with clean side labels. Use these time anchors (ICT-style midnight + key US windows) to frame bias, volatility pockets, and intraday trade locations.
What’s original in this version (changes)
Right-padded stubs instead of chart-wide rays — each level ends N bars past the latest candle (configurable).
Side labels at the line tip — text-only labels (0000, 0830, 0930, 1330) that sit at the right end of each stub and update every bar.
Optional prior-day history — show Today only or Today + Prior Day; older lines/labels auto-pruned.
Per-anchor controls — Display, Style, Color, Width, and Show Label for each time.
What it plots (and why)
0000 (NY Midnight): daily session anchor for bias/liquidity context.
0830 (NY): macro data window (CPI/NFP/claims) where volatility often concentrates.
0930 (NY): US cash equity market open; opening-drive structure/acceptance tests.
1330 (NY): early-afternoon anchor for continuation vs. fade.
How it works (under the hood)
Session detection: time("1", session, "America/New_York"); first bar flagged via not na(ts) and na(ts ).
Anchor price: open of that first bar per session/day.
Rendering: lines drawn with xloc=bar_index from start bar to bar_index + Right Pad; x2 updates every bar (no extend.right).
Labels: placed at line.get_x2(line) + Label Pad, soft color variant; updated per bar to stay on the tip.
History: arrays keep either today only or today + yesterday and delete anything older immediately.
How to use
Add to any intraday chart (futures/FX/indices). Anchors are always NY-time; TradingView handles DST.
Inputs
00:00 / 08:30 / 09:30 / 13:30 (NY): Display, Line Style, Color, Width, Show Label
Right Edge: Right Pad (bars) · Label Pad (bars)
History: Show Prior Day (History) — off = today only; on = today + yesterday
Suggested pads: Right Pad 2–5 bars; Label Pad 0–2.
These are context anchors, not signals. Combine with your execution model (market structure, liquidity, FVG/OBs, etc.).
Attribution & License (MPL-2.0)
Original work: “ICT NEW YORK MIDNIGHT OPEN AND 8.30 AM OPEN” by ALPHAICTRADER (MPL-2.0).
This derivative: modifications listed above; source published and kept under MPL-2.0 per license terms.
If you distribute a modified version of this Pine file, you must keep MPL-2.0, retain the copyright/licensing header, publish your modified source, and document your changes.
Notes: Pine v5. Minimalist (no day dividers). Educational tool; not financial advice.
Copyright: © ALPHAICTRADER 2022 · © Funk 2025
License: MPL-2.0
Today's 5min HH/LL LinesOverview
This indicator identifies the highest high (HH) and lowest low (LL) formed by the first 5 one-minute candles of the current trading day. Once calculated, it plots continuous horizontal lines at those price levels for the remainder of the day.
How it works
The script internally requests 1-minute data for the current symbol, regardless of your chart’s timeframe.
At the start of each new trading day, it resets counters.
It captures the highest high and lowest low across the first five completed 1-minute candles.
After the 5th one-minute bar closes, it draws:
A green horizontal line at the highest high.
A red horizontal line at the lowest low.
These lines extend to the right, covering the entire trading session, and automatically scale with zoom/pan.
At the next session, the old lines are deleted and recalculated for the new day.
Use cases
Helps spot early intraday support and resistance zones.
Useful for breakout or reversal strategies that monitor when price breaches the first 5-minute range (derived from 5x1m bars).
Can be combined with volume, momentum, or candlestick signals for high-probability entries.
Key features
Works on any timeframe — always uses 1-minute data for precision.
Shows lines only for the current day (no clutter from prior sessions).
Lines are dynamic and adaptive — they remain fixed at the calculated price but extend continuously across the chart.
Auto Reference Relative Valuation Oscillator📌 Auto Reference Relative Valuation Oscillator
🧠 What does this script do?
This indicator shows whether the current asset is overvalued or undervalued compared to a reference symbol like:
- TVC:DXY – US Dollar Index
- TVC:GOLD – Gold
- CRYPTOCAP:BTC – Total BTC Market Cap
- SP:SPX – S&P 500 Index
- TVC:USOIL – US Crude Oil
It uses the ratio:
price of current asset ÷ price of reference asset
Then normalizes this ratio into a 0–100 oscillator scale .
---
⚙️ Settings:
- Asset Group : Choose your reference symbol by group (Forex, Gold, Crypto, etc.)
- Lookback Period : Period used for calculating high/low bounds (default: 14)
- Upper Bound : Overvaluation threshold (default: 90)
- Lower Bound : Undervaluation threshold (default: 10)
---
📈 How to use:
- Values above 80–90 → Asset is likely overvalued
- Values below 20–10 → Asset is likely undervalued
- Combine with Supply/Demand Zones , and price action to spot high-probability trade entries.
Example:
If the indicator is undervalued AND price touches a demand zone → Potential BUY
If the indicator is overvalued AND price hits a supply zone → Potential
---
✅ Best for:
- Multi-asset traders
- Forex and Crypto trading
- Intermarket analysis
- Confluence with fundamental/macroeconomic models
---
🧩 No coding or setup needed:
Just apply the indicator, choose your asset group, and trade smartly based on valuation.
3CRGANG - Supply Demand Zones3CRGANG - SUPPLY/DEMAND ZONES
This indicator identifies and displays supply and demand zones on the chart, based on price action and pivot points. It categorizes zones into five states—Untested, Verified, Weak, Flipped, and Broken—using customizable testing methods ("Dynamic - Bars" or "Mechanical - Pivots"). The zones are calculated using fractal analysis and ATR-based boundaries, with options to adjust sensitivity, zone width, and merge behavior.
Features:
Zone Types: Visualizes support and resistance zones with distinct colors for each state.
Customizable Settings: Adjust fractal sensitivity, zone boundary ATR multiplier, and merge passes for precise zone detection.
Testing Methods: Choose between dynamic bar-based or mechanical pivot-based testing for zone validation.
Visibility Options: Toggle visibility for each zone state (Untested, Verified, Weak, Flipped, Broken).
Labels: Display zone details, including size (in pips or dollars) and test count, with customizable label positioning and size.
Alerts: Configurable alerts for zone interactions, filtered by trading sessions (NYSE, LSE, FSE, SSX, TSE, HKSE) and user-defined Do Not Disturb (DND) periods.
Holiday and Session Filters: Incorporates exchange-specific holiday schedules and session times to control alert triggers.
Timezone Support: Select from a wide range of timezones to align alerts with your local time.
Settings:
Test Mode: Select testing method and set minimum test gap and weak zone threshold.
General: Configure lookback period for zone detection.
Pivot Filters: Adjust fractal sensitivity and maximum merge passes.
Zone Width: Set ATR multiplier and fuzz factor for zone boundaries.
Visual: Customize zone style (solid, dashed, dotted), border width, and horizontal extension.
Visibility: Show or hide specific zone states.
Labels: Enable/disable labels, adjust their position, size, and content (zone size, test count).
Alerts: Enable alerts for specific zone states and filter by exchange sessions or weekends.
DND Settings: Set DND periods and timezone for alert suppression.
Colors: Customize colors for each zone state and type.
Notes:
The indicator is designed for flexibility across various markets and timeframes.
Alerts respect user-defined session filters and holiday schedules for major exchanges.
Ensure sufficient chart history (up to 500 bars) for accurate zone calculations.
Use the provided settings to fine-tune zone detection and alert behavior to suit your trading strategy.
TCI Key Institutional Levels v2.0This script is a modified version of the Smart Money Concepts (SMC) framework originally published by LuxAlgo here: Smart Money Concepts – LuxAlgo
.
All credit and ownership of the original code goes to LuxAlgo.
Original indicator Credits:
The purpose of this publication is not to copy-paste the LuxAlgo indicator, but to present a modified version adapted in line with the concepts taught by Trading Cafe India (TCI).
These modifications include adjustments and refinements to better reflect the methodology followed by TCI, while still acknowledging the foundation laid by LuxAlgo.
⚠️ Important Notes:
This script is not an official LuxAlgo product.
This script is not an official TCI product.
This pretty much aligns with the TCI theory.
It is an independent, educational adaptation created for users who wish to see SMC concepts in the context of TCI-style modifications.
The modifications are original contributions and the script has been republished with the intention of providing additional learning value to the TradingView community.
By publishing this indicator, I fully respect and acknowledge the original author (LuxAlgo), while making clear that the changes applied are my own interpretation of SMC principles influenced by TCI’s teachings.
🔧 Key Functionalities & Modifications
Market Structure Labels
The standard Break of Structure (BOS) is now presented as Breaker, aligning with TCI’s interpretation.
The standard Change of Character (CHoCH) is now presented as Trap, reflecting how false moves and liquidity traps are often observed in Indian indices like Nifty & Bank Nifty.
Order Block & Liquidity Concepts
Retains core order block, supply-demand, and liquidity zone logic from the SMC framework.
Visuals and labels have been adjusted for easier interpretation by intraday traders in Indian markets.
Custom Adaptation for Indian Audience
Naming conventions and alerts have been optimized so beginners and experienced traders in India can relate to the terminology taught by TCI.
Chart annotations have been simplified to reduce clutter, making it more practical for real-time option trading and scalping strategies.
Weekly Fibonacci Pivot Levelsthis indicator in simple ways, draw the weekly fibo zones based on calculations
weekly zones are drawn automatically based on previous week, and are updated once a new week is opened
you can use it the way you like or adapt to your trading strategy
i really use it at extremes and when a divergence is occurring in these zones
Zarattini Intra-day Threshold Bands (ZITB)This indicator implements the intraday threshold band methodology described in the research paper by Carlo Zarattini et al.
papers.ssrn.com
Overview:
Plots intraday threshold bands based on daily open/close levels.
Supports visualization of BaseUp/BaseDown levels and Threshold Upper/Lower bands.
Optional shading between threshold bands for easier interpretation.
Usage Notes / Limitations:
Originally studied on SPY (US equities), this implementation is adapted for NSE intraday market timing, specifically the NIFTY50 index.
Internally, 2-minute candles are used if the chart timeframe is less than 2 minutes.
Values may be inaccurate if the chart timeframe is more than 1 day.
Lookback days are auto-capped to avoid exceeding TradingView’s 5000-bar limit.
The indicator automatically aligns intraday bars across multiple days to compute average deltas.
For better returns, it is recommended to use this indicator in conjunction with VWAP and a volatility-based position sizing mechanism.
Can be used as a reference for Open Range Breakout (ORB) strategies.
Customizations:
Toggle plotting of base levels and thresholds.
Toggle shading between thresholds.
Line colors and styles can be adjusted in the Style tab.
Author:
Gokul Ramachandran – software architect, engineer, programmer. Interested in trading and investment. Currently trading and researching strategies that can be employed in NSE (Indian market).
Contact: (mailto:gokul4trading@gmail.com)
LinkedIn: www.linkedin.com
Intended for educational and research purposes only.
Quantel iFVG & Breakout DetectorThe Quantel iFVG & Breakout Detector is a precision tool designed to highlight inversion fair value gaps (iFVGs) and breakout opportunities with crystal-clear visuals. It plots:
Arrow Signals – to mark breakout confirmations.
Box Highlights – to show active iFVG zones and breakout ranges.
💡 How to Use:
Use the arrows as directional cues for potential entries after a confirmed breakout.
Watch the highlighted boxes to identify imbalances and zones of interest for reversals or continuation.
Best combined with liquidity sweeps, BOS/CHOCH, or higher timeframe bias for stronger confirmation.
✅ Features:
Automatic detection of iFVGs with dynamic zone plotting.
Breakout confirmation arrows for easy trade visualization.
Clean, uncluttered chart display suitable for all timeframes.
⚠️ Disclaimer: This tool is for educational purposes only. Not financial advice. Always combine signals with your own trading plan and risk management.
