开始

趋势分析

Day/Month Returns Analysis [theUltimator5]This indicator calculates the average returns for day of the week, months of the year, and each Friday of the month, then gives a visualization of the average returns in green/red bars as well as the average percentage move. You can select from (3) options. 1) Day of the week. This shows the average returns for each day of the week calculated back as far as your chart history goes. For crypto, it calculates all 7 days of the week. If not crypto, it does Monday through Friday 2) Month of the year. This shows the average returns for each month. Self explanatory 3) Friday of the month. This is a niche setting that lets you see the average returns of each Friday of the month, to track if there is any OPEX related consistency. You can also set the start date for the indicator to start calculating from in the options. If there is a certain date that a symbol starts acting differently and you want to only calculate from that point forwards, you can. The visuals appear as a table which can be repositioned to whichever section of your screen you would like. This indicator works best on the daily timeframe since lower timeframes may not have enough bars back in history to calculate enough to make an average.
Pine Script®指标
由TheUltimator5提供
3
Eagle Algo Pro : Trend & Reversal SystemOverview Eagle Algo Pro is a comprehensive technical analysis system designed for scalping and short-term trading. It allows traders to identify high-momentum breakouts while simultaneously monitoring key structural reversal levels. By combining Trend Follow (Eagle) and Mean Reversion (S/R) logic into a single tool, this script eliminates the need for multiple indicators, offering a clean and actionable dashboard. Concepts & Underlying Calculations 1. Dynamic Channel Breakout (Eagle Logic) The core trend-following component utilizes a dynamic price channel mechanism, conceptually similar to localized Donchian Channels . Calculation: The script tracks the highest high and lowest low over a user-defined lookback period (default 20). Logic: A signal is generated when the price closes strictly outside this dynamic range. This signifies a volatility expansion and potential trend continuation, filtering out sideways noise. 2. Advanced Support & Resistance (Array-Based) Unlike standard pivot indicators that vanish after a few bars, this script uses Pine Script's Array Library to manage memory. Memory System: It identifies Pivot Highs and Lows and stores them in a memory array. These levels are projected forward as "Zones". Filtering: The script calculates the "strength" of each zone based on the number of price rejections (wicks). It dynamically updates these zones and removes invalid ones, keeping the chart clean. Reversal Confirmation: When price tests a stored Zone, the script checks for Rejection Wicks and RSI alignment (Overbought/Oversold) before suggesting a reversal. 3. Linear Regression Channel (RiViL) To visualize the current market slope and deviation: Math: It calculates the "Line of Best Fit" (Linear Regression) over 100 periods and plots Standard Deviation bands (2.0 deviation). Usage: This helps traders visually confirm if the market is overextended relative to its statistical mean. How to Use For Trend Trading: Look for the "CALL" or "PUT" text labels generated by the Eagle logic. These signals are most effective when the Linear Regression channel is sloping in the direction of the trade. For Reversal Trading: Watch for the colored Resistance (Red Zone) and Support (Green Zone) . A reversal signal is valid only if the price shows a rejection wick and RSI confirms the momentum shift. Dashboard: The on-screen panel provides real-time statistics on signal performance, distinguishing between Direct Wins and Martingale recovery sequences to help with risk management. Originality & Value This script justifies its Invite-Only status by implementing a custom Memory-Management System for Support & Resistance using arrays. Unlike public scripts that clutter charts with infinite lines, Eagle Algo Pro intelligently filters historical data to show only active, tested zones. This complex logic is protected to ensure the integrity of the algorithm. Disclaimer This tool is for educational and analytical purposes only. Past performance displayed on the dashboard does not guarantee future results. Traders should use proper risk management.
Pine Script®指标
由Eagle_Algo_Pro提供
[SpaghettiForex] SFK - MACD Wave Divergences + Keltner x3SFK — MACD Wave Divergences (PRE + CONF) + Keltner x3 is a context indicator that highlights MACD histogram “wave” divergences on price, with two modes: - PRE (Turning Point): earlier, faster markers inside the current wave (may be invalidated if the wave continues). - CONF (Wave Peak): confirmed markers based on the true peak of each completed wave (typically more stable). It also plots three Keltner Channel bands to provide volatility/extension context around the same areas. This tool does not predict the market and it is not a guaranteed entry system. Divergences can fail. SFK is designed to help you spot potential momentum/structure mismatches and then decide what to do with your own process and risk management. What it shows: - PRE divergence markers (optional): triggered at the first histogram turning point inside a wave. - CONF divergence markers (optional): triggered when a wave ends and its true peak is confirmed. - Divergence lines connecting the two reference peaks (optional). - Keltner Channels x3 (optional): EMA basis + ATR bands (1x / 1.5x / 2x). ________________________________________ Screenshots (examples): Screenshot 1 — Overview (Keltner x3 + divergences) A clean chart view showing Keltner Channels and a couple of divergence examples. Use this to communicate what SFK looks like in normal use. Screenshot 2 — PRE divergence (early turning point) Example of a PRE divergence: earlier detection during the wave as the histogram turns. PRE is faster but can be invalidated if the wave continues and a stronger peak forms. Screenshot 3 — CONF divergence (wave peak confirmed) Example of a CONF divergence: the signal is generated at wave end using the confirmed wave peak. This mode is slower but generally more stable and easier to validate visually. ________________________________________ How it works (high level): 1. SFK computes the MACD histogram and splits it into “waves” based on histogram sign (positive vs negative). 2. For each wave, it tracks one peak per wave: - Positive wave → maximum histogram value + corresponding price high. - Negative wave → minimum histogram value + corresponding price low. 3. A divergence is detected when two peaks of the same colour meet classic conditions: - Bearish: price makes a higher high while histogram peak is lower. - Bullish: price makes a lower low while histogram peak is higher. 4. PRE uses an early turning point inside the current wave; CONF uses the confirmed peak when the wave ends. Practical use (context, not entries): - Use CONF for confirmed wave-peak divergences (fewer, more stable by design). - Use PRE for early turning-point alerts (faster, may be invalidated as the wave develops). - Use the Keltner bands to contextualise whether price is expanding/extended when a divergence appears. ALERTS Optional alerts are available for: - PRE bearish / PRE bullish divergences. - CONF bearish / CONF bullish divergences. If “Alert On Bar Close Only” is enabled, alerts are evaluated only on confirmed bar close. Important note: SFK is a context indicator. It does not provide financial advice or performance guarantees. Divergences can appear in strong trends and still fail. Always apply appropriate risk management and confirmation rules from your own process.
Pine Script®指标
由SpaghettiForex提供
PDH & PDLDescription (Copy & Paste) Overview This is a lightweight, optimized indicator that displays the Previous Day High (PDH) and Previous Day Low (PDL) on intraday charts. These levels are critical reference points for day traders, acting as key liquidity pools where price often reacts. Whether you are trading Mean Reversion (fading the edges) or Momentum (breakouts), knowing exactly where yesterday's auction limits were is essential context. Key Features Historical Accuracy: Plots historical levels using step-line style, allowing you to backtest how price reacted to PDH/PDL in the past. Zero Clutter (V2 Optimization): Unlike standard indicators that spam labels on every bar, this version uses efficient var label logic. It maintains a single label instance that stays pinned to the current price action, keeping your chart clean. Multi-Timeframe Ready: Fetches Daily data correctly regardless of your intraday timeframe (1m, 5m, 15m, etc.). Fully Customizable: Toggle history lines or current labels on/off and adjust colors/width to fit your theme. How to Use Context: Use these levels to determine market sentiment. Opening above PDH suggests bullish imbalance; opening inside the range suggests balance/chop. Entry Triggers: Watch for "Rejection" (wicks) or "Acceptance" (strong closes) at these lines. Breakout: Price closes firmly outside the level with volume. Reversal: Price sweeps the level and immediately reclaims the range. Settings Show Historical Levels: Enable to see the levels for previous days (useful for backtesting). Show Current Labels: Enable to see the price tags on the hard right edge.
Pine Script®指标
由SealNg提供
Tokyo Protocol Session Pivots PDH & PDL Overlay Tokyo Protocol: Session-Anchored Structural Overlay The Tokyo Protocol: Session PDH/PDL Overlay is a precision structural mapping tool designed for professional day traders. While most indicators use a standard "midnight" reset, this script allows you to Anchor your trading day to specific global liquidity cycles (Tokyo, London, or New York). It identifies the critical "battlefield" levels—PDH, PDL, and Institutional Pivots—relative to the session you are actually trading. The "Why" Behind the Anchor If you are trading the Tokyo Open, your "Daily" high and low shouldn't be defined by an arbitrary UTC reset. This script uses a Time-Shift Engine to recalculate the previous day's range based on your chosen session start. This provides a "True Session" perspective on where liquidity is resting. Key Tactical Features • Dynamic Session Anchoring: Choose from preset UTC anchors for Sydney, Tokyo, London, and NY, or set a Custom UTC anchor. This ensures your PDH/PDL levels align with actual market volume shifts. • Institutional Global Pivots: Includes non-repainting Traditional Pivots () pulled from Daily OHLC data (). These levels remain fixed throughout the day, providing reliable targets and bounce zones that match standard institutional floor pivots. • Zero-Lag PDH/PDL: Automatically identifies and extends the Previous Day High and Low. Unlike standard lines, these anchor to the exact timestamp the high/low occurred, providing a clear visual of the previous session's structural development. • Non-Intrusive HUD: A clean table in the top-right corner confirms your current Anchor settings, ensuring you never trade on the wrong "time map." The "Tokyo Protocol" Entry Method This overlay is designed to be the "Location Filter" for the Tokyo Protocol Regime Engine: 1. Direction (Engine): The Regime Engine gives a "GO" signal for a Long. 2. Location (Overlay): Do not buy at market. Wait for the price to pull back to the Daily Pivot (P), PDL, or an S1/S2 level as defined by this overlay. 3. Execution: Look for a candle rejection/continuation from these structural "value zones." Best Use Case • Timeframe: Optimized for 5m and 15m. • Markets: Any major forex pair, index, or commodity during session opens. • Setup: Use this in tandem with the Tokyo Protocol Regime Engine to harmonize Direction and Location. Access & Education This is an Invite-only script. We believe in providing tools to traders who are committed to a mechanical, data-driven process. To request access: 1. Subscribe to our YouTube channel: youtube.com/@ProtocolTrading 2. Follow our Live Session recordings to see how we use these levels to define 1.5:1 and 2:1 RR trades. 3. YouTube subscribers will get an invite
Pine Script®指标
由The_Tokyo_Protocol提供
The Golden Pocket Master Tool: High-Probability Retracement ZoneThe Golden Pocket is one of the most powerful "hidden" zones in technical analysis. While many traders look at basic Fibonacci levels, the area between the 0.618 and 0.65 retracement levels is where the most reliable trend reversals happen. This indicator automates the entire process, identifying significant market swings and projecting high-probability Entry, Target, and Stop Loss levels directly on your chart. How It Works Auto-Swing Detection: The script identifies major "Impulse Moves" (pumps or dumps) using dynamic Pivot Highs and Lows. The Golden Pocket: It draws a highlighted "Gold Box" at the 0.618–0.65 Fibonacci zone. This is your high-probability area to Buy the Dip (in an uptrend) or Sell the Bounce (in a downtrend). Smart Targets: Unlike standard Fibonacci tools that use random extensions, this script sets realistic targets based on recent market structure (Previous Swing Highs/Lows). Key Features 📊 Real-Time Trade Dashboard: See your exact Entry Zone, Take Profit, and Stop Loss prices in a clean, top-right table. ⚖️ Risk/Reward Calculator: Automatically calculates the R/R ratio for the current setup so you only take the best trades. 🏷️ Dynamic Labels: Floating "LONG ZONE" or "SHORT ZONE" labels ensure you always know the current market bias. 🛑 Invalidation Line: Includes a red dotted line at the 0.786 Fibonacci level. If price closes past this, the trade setup is invalidated. How to Trade the Play For Longs: Wait for a Green Bias. Price should pull back into the Gold Box. Look for bullish candle confirmation and target the Blue Line. For Shorts: Wait for a Red Bias. Price should bounce up into the Gold Box. Look for bearish rejection and target the Blue Line.
Pine Script®指标
由mhpr1991提供
The Tokyo ProtocolThe Tokyo Protocol: Multi-Pillar Market Regime Engine The Tokyo Protocol is a high-performance trend-regime filter designed primarily for the 5-minute timeframe. Rather than providing lagging "Buy/Sell" signals, this script acts as a Mechanical Decision Engine. It synthesizes Price Action, Volatility-Adjusted Momentum, and Volume Flow to determine the "Path of Least Resistance." How It Works The script evaluates the market through four proprietary lenses to ensure you are only trading when the "environmental wind" is at your back: Structural Bias (The Foundation): Uses Yesterday’s Floor Pivots with a tick-based buffer zone to establish the Daily Regime. It requires a confirmed "Regime Shift" (user-tunable) to prevent flickering in choppy markets. Normalized Momentum (MACD Z-Score): Unlike standard MACD, this engine calculates the Standard Deviation of the MACD line. It identifies "UP_SEPARATED" (accelerating trends) versus "FLAT_HUGGING" (dangerous chop) using Z-score thresholds. Volume Flow & Profile: Integrates OBV Slope analysis and a Mechanical Volume Profile to find High-Liquidity Support/Resistance nodes. It detects if a move is being fueled by "Smart Money" or if it is an "Exhaustion" move. Divergence Hysteresis: A refined, pivot-based divergence engine (RSI & OBV) identifies "Real" vs. "False" price moves, preventing you from buying into a structural trap. The "Action" Engine: Understanding "GO" The most important feature of this script is the Action Table. GO: This is NOT a "Buy Now" signal. It is an Environment Validation. It indicates that the structural bias, volume flow, and momentum are all synchronized. Use "GO" as a green light to execute your own specific entry triggers (flags, candle patterns, etc.) with higher probability. WAIT: Indicates "Energy Loss" or "Regime Weakening." The trend may be intact, but the internal health of the move is deteriorating. REVERSAL: Triggered when the price is still above/below the pivot, but internal metrics (RSI/MACD/OBV) have aligned aggressively against the current direction. SKIP: No structural edge. Market is in a neutral squeeze. Best Use Case Timeframe: Optimized for 5m (Day Trading). How to Enter: The "Primed" Strategy IMPORTANT: This is not a "Market Order" indicator. A "GO" signal does not mean "Buy at Market." It means the market environment is primed for that direction for the remainder of the session. The Entry Blueprint: Wait for the Signal: The system identifies a LONG or SHORT bias and provides a GO status. The Pullback: Once the "GO" appears, do not chase the price. Look for a pullback to a key structural level (Daily Pivot, Fibonacci retracement, or High-Liquidity Support). The Continuation: Execute on the bounce/rejection from that level. Targets: Optimized for 1.5:1 to 2:1 Reward-to-Risk ratios. Timing Note: This engine is designed to be used after the first 15 minutes of a major market open (Tokyo, London, or New York). It uses the initial opening volatility to calibrate the regime and then capitalizes on the sustained momentum of the session. The History: From AI to Pine Script The Tokyo Protocol began as a manual process to remove the emotional "guesswork" of directional bias during the Asian Open. By using AI to review live market snapshots against parameters developed over years of trading, I found high accuracy but a "long-winded" workflow (manual calibration and constant snapshotting). After building a deterministic engine and completing over 500 backtests, I realized the logic was robust enough to be fully automated. This Pine Script is the result of that transition—taking a high-level AI analysis workflow and hard-coding it into a responsive, real-time trading tool. Backtest Insight Data indicates that trades completed within the first hour of a signal often have a lower win rate than those that develop over 2+ hours. When you see a GO signal, remember that the session is primed for that direction over the course of the session. Be patient, wait for your levels, and let the trade develop. Technical Pillars Structural Bias: Daily Floor Pivots with a tick-based hysteresis buffer. Momentum Z-Score: Normalizes MACD to distinguish between trend acceleration and "hugging" chop. Volume Flow: Integrates OBV Slope and a Mechanical Volume Profile to find "Smart Money" nodes. Divergence Engine: Refined RSI/OBV logic to filter out structural traps and exhaustion. Action Table Glossary GO: The environment is synchronized. Look for entries in the bias direction. WAIT: Energy loss or regime weakening. Sit on your hands. REVERSAL: Internal metrics have flipped against the regime. Watch for a trap. SKIP: No structural edge. Neutral/Chop. Role: Use as a "Parent Filter." If the Protocol says WAIT or SKIP, sit on your hands. If it says GO, look for entries in the indicated direction.
Pine Script®指标
由The_Tokyo_Protocol提供
1
Volatility & Probability by Hour/DayVolatility & Probability by Hour/Day Analyzes historical candle data to find statistically significant time-based patterns. Tracks green candle probability, volatility, and average returns broken down by hour (UTC), day of week, and their combinations. What It Shows: Hourly Table: P(Green), edge, volatility, and average return for each hour (00:00-23:00 UTC) Day of Week Table: Same metrics aggregated by day (Sun-Sat) Top Combinations: The 5 best bullish and 5 best bearish day+hour slots ranked by edge Key Metrics: P(Grn): Historical probability the candle closes green Edge: Deviation from 50% (how tradeable the bias is) Vol%: Average candle range as percentage of price N: Sample size Use Cases: Identify optimal entry windows with statistical edge Avoid low-edge, high-volatility periods (noise) Find specific day+hour combinations with compounding edges Time trades around recurring market patterns Notes: All times in UTC Current period highlighted with ► Best results on liquid assets with sufficient history Edges are historical and not guaranteed to persist
Pine Script®指标
由LEEFO提供
keen ea Strategy Concept: Trend-Following Mean Reversion This is a hybrid strategy that combines: Trend identification (using AMA - Adaptive Moving Average) Money flow analysis (using CMF - Chaikin Money Flow) Dynamic support/resistance (using Stiffness indicator) Exit timing (using dual EMAs) 📊 Indicator Roles & Logic 1. Primary Trend Filter: Adaptive Moving Average (AMA) Purpose: Identifies the underlying trend direction while reducing lag during ranging markets Logic: AMA adjusts its sensitivity based on market volatility (Efficiency Ratio) Configuration: Fast EMA (56-68): Reacts quickly to price changes Slow EMA (99-110): Provides stable trend direction ER Period (84): Measures market efficiency/trend strength 2. Entry Signal: Chaikin Money Flow (CMF) Purpose: Confirms entries with volume-based momentum Logic: Measures buying/selling pressure by comparing close price to daily range, weighted by volume Configuration: Length (59-60): Medium-term money flow analysis Entry Rule: CMF crossing above/below zero or specific thresholds 3. Dynamic Support/Resistance: Stiffness Indicator Purpose: Identifies potential reversal zones where price movement "stiffens" Logic: Measures the rate of price change slowdown (similar to momentum deceleration) Configuration: Stiffness Length (59-60): Lookback period for stiffness calculation Smoothing Length (15-17): Smoothes the stiffness signal Threshold (60): Trigger level for trade signals 4. Exit System: Dual EMA Crossover Purpose: Manages exits and trail stops Logic: Fast Exit EMA (40): Quick exit signal Slow Exit EMA (159-160): Confirms exit direction Exit Rule: Fast EMA crosses below Slow EMA (for longs)
Pine Script®策略
由Klajdikaja提供
Mine Shaft + Drift + Ore Pocket Detector (Gap+Touch)Mine Shaft + Drift + Ore Pocket Detector (Gap+Touch) — Full Description (v1.6.1, Pine v6) *Experimental - *Test Phase* 1) What this indicator is intended to do This indicator attempts to algorithmically discover “mine shaft” price structure on a chart by: Collecting structural anchor points (gaps and optionally pivots), Generating candidate trend “rails” (centerline + parallel upper/lower borders) from pairs of anchors, Fitting an optimal channel width around each candidate centerline, Scoring candidates based on how well price action conforms to the channel (touches + containment), Selecting and rendering: the main shaft channel (primary), additional drifts (secondary shafts per direction), And then detecting Ore Pockets: time locations where multiple selected lines intersect (time confluence / intersection clustering). The conceptual model is: A shaft = a best-fit channel that price respects over time (the “main tunnel”). Drifts = alternate channels close in quality to the main shaft (secondary tunnels). Ore pockets = future/past time coordinates where multiple channels’ centerlines intersect densely (confluence in time, not necessarily in price). 2) What it is doing right now (current behavior) In its current form, the script does a bounded, performance-limited scan: It stores a limited number of anchor points in arrays. It only considers a bounded number of recent anchors per direction. It constructs candidate lines from anchor pairs and evaluates channel fitness using sampled bars. On the last bar, it selects top candidates per direction and draws: a “main” channel per mode (single best overall, or separate up/down), plus optional drift channels, plus ore pocket markers. It is producing meaningful channels and drifts, but it is currently more likely to lock onto a strong “local” shaft than the one macro shaft spanning the entire market structure. 3) Core mechanics (how the script finds shafts) 3.1 Anchor generation (what points it uses) Anchors are the “support points” used to build candidate shaft centerlines. Two anchor families are supported: A) Gap anchors (from your selected gap mode) These attempt to capture “displacement events” and their boundaries/mids. B) Pivot anchors (optional structural anchors) These use pivots to inject macro structure points that are not strictly gap-based. All anchors are stored as: anchorX: bar_index of anchor anchorY: price of anchor anchorD: direction flag (+1 for up, -1 for down) Anchors are capped by maxAnchors with FIFO trimming. 3.2 Candidate generation (how it produces centerlines) For each direction (+1 and -1): Collect “recent” anchors of that direction within lookbackBars (bounded to maxDirAnchors). For each pair of anchors (x1,y1) and (x2,y2) that satisfy: spacing within , slope sign consistent with direction, Construct the line equation: slope m and intercept b Fit a channel width w around that line (via width mode). Score it (touches + inside count minus width penalty). Keep the top K rails (K = driftCount+1 typically). 3.3 Scoring model (what “best” means right now) For a candidate centerline: At sampled bars (stride sampling), compute: channel top = y(x) + w channel bot = y(x) - w Evaluate: Inside: candle range fits within the channel ± tolerance Touches: high near top border, low near bottom border (within tolerance) Score formula: score = insideCount * insideWeight + touchCount * touchWeight - (w / ATR) * widthPenalty So: Higher inside and touch counts increase score Wider channels are penalized (in ATR units) to avoid “cheating” via enormous width 3.4 Width fitting (how the channel thickness is chosen) Width is either: Fit (scan widths): scans widths between a min width and a max deviation cap and selects the best scoring width. Fixed ATR Envelope: uses a fixed width derived from ATR (currently hard-coded to a 2.0 ATR envelope in your present draft). Fixed Max Deviation: width is max observed deviation from line in sampled window. This matters because “macro shaft” detection is strongly influenced by whether the width-fitting is allowed to expand enough to contain large historical moves, without being penalized into losing to a smaller local shaft. 3.5 Rendering (what gets drawn) For any selected rail, it draws: Upper border line (top rail) Lower border line (bottom rail) Optional centerline (main only) Optional fill between borders (main only) Label at current bar with touches and inside count Drifts render similarly but without main-only features (depending on flags). 3.6 Ore Pocket detection (time confluence) Ore pockets are not “price zones” directly. They are computed as follows: Collect selected centerlines (m,b) for: the main selected shaft(s), and all drift centerlines (both directions if present) For each pair of selected lines, compute intersection x-coordinate: x* = (b2 - b1) / (m1 - m2) Only keep intersections within: Cluster intersections by time proximity (clusterBars) Mark the strongest clusters (highest counts) as “Ore Pocket” vertical dotted lines with labels. Interpretation: A dense cluster indicates many selected rails converge around a similar time coordinate. It is a “time confluence” hypothesis point. 4) Full settings reference (what each setting is for) 01) Gap Anchors Gap Mode FVG (3-candle) Uses a classic 3-candle fair value gap pattern: Up gap if low > high Down gap if high < low Anchors are derived from the gap boundaries. Candle Gap (open-close) Gap based on open vs close of the same bar with a tick threshold. Candle Gap (open-prev close) Gap based on open vs close with a tick threshold. Gap Threshold (ticks) Only used for the candle gap modes. Controls the minimum gap size required to register an anchor. Anchor Price Boundary: anchors at one gap boundary (more “structural edge”) Mid: anchors at midpoint of the gap (more “center of displacement”) Include Pivot Anchors (structure) When enabled, adds pivots as additional anchors to stabilize macro detection. Pivot Length Pivot sensitivity (how many bars left/right define a pivot). Larger values = fewer, more structural pivots. 02) Channel Fit + Touch Scoring Lookback Bars The historical window used to: filter which anchors are considered “recent enough” evaluate channel fitness (sampled evaluation) Larger lookback tends to favor macro shafts, but also increases computational risk (mitigated by evalBars and stride). ATR Length ATR period used for tolerance and width penalty scaling. Tolerance (ATR mult) Defines how close price must be to a rail to count as “touch” and how strict the “inside channel” containment is. Higher tolerance = easier to score high on touch/inside. Min Border Touches (keep rail) Minimum number of border touches required before a candidate is even eligible. Score: Inside Weight Weight of inside count in score. Score: Border Touch Weight Weight of border touches in score. This is a strong driver of “shaft-like” behavior. Score: Width Penalty (in ATRs) Penalizes wide channels relative to ATR. Higher penalty biases toward narrow/local shafts. 03) Performance Controls Max Stored Anchors (global) Maximum anchor points kept in memory arrays. Too low can cause loss of macro structure; too high increases candidate noise. Max Anchors / Direction (scan) Hard cap on how many anchors are used in candidate generation per direction. Critical: this strongly influences whether macro shaft can be found, because if you only keep the most recent anchors, you lose the early-structure anchor points. Eval Bars (max) Maximum historical bars actually evaluated for scoring. Even if lookbackBars is large, evaluation is capped here. Eval Stride (sample every N bars) Sampling step for evaluation. Larger stride = faster but less accurate scoring. 04) Candidate Generation Min Anchor Spacing (bars) Minimum distance between the two anchors used to define a candidate line. Prevents micro-noise lines from being evaluated. Max Anchor Spacing (bars) Maximum distance between the two anchors used to define a candidate line. If this is too low, you cannot generate truly macro candidate lines. 05) Shaft + Drift Display Main Shaft Mode Best Overall (Single Shaft): chooses one best rail among Up/Down and draws it as main. Up Only: show only the best upward rail. Down Only: show only the best downward rail. Up + Down: show both main up rail and main down rail simultaneously. Show Ascending Shaft Toggles rendering for the “up” main shaft (when mode allows it). Show Descending Shaft Toggles rendering for the “down” main shaft (when mode allows it). Drifts per Direction Number of additional top-ranked rails to draw per direction (after the best one). Extend Lines Right: extend lines to the right only. Both: extend both left and right. Fill Main Shaft Channel Fill between upper and lower borders for main shaft. Main Shaft Fill Transparency Transparency level for main fill. Show Main Shaft Centerline Draw the dashed centerline for the main shaft. 06) Ore Pocket (Intersection-Time Confluence) Show Ore Pockets (Time Confluence) Enables ore pocket discovery and rendering. Intersection Window Forward (bars) How far into the future intersections are considered. Intersection Window Backward (bars) How far into the past intersections are considered. Cluster Radius (bars) How close in time intersections must be to merge into a cluster. Min Intersections per Cluster Minimum cluster count required before a pocket is shown. Max Pocket Markers Limit how many pocket clusters are drawn. 07) Visual Controls Show Gap Anchors Displays the gap anchor dots for debugging. Show Pivot Anchors Displays pivot anchor dots for debugging. 5) How to use it (practical workflow) Step A — Confirm anchor behavior Turn on Show Gap Anchors. Choose your Gap Mode. Verify you are seeing anchors where you expect (displacement boundaries). If anchors are sparse: Reduce gap threshold (ticks) for candle-gap modes Enable pivots to inject structure Increase lookbackBars and maxAnchors so early anchors are not dropped Step B — Get stable main shaft candidate discovery Enable Include Pivot Anchors with a medium pivotLen. Use Fit (scan widths) initially. Increase Max Anchors / Direction (scan) so you’re not only using recent anchors. Increase Max Anchor Spacing so macro pairs are eligible. If you keep getting only local shafts: That is usually because the candidate pool does not include enough old anchors, or the maxSpacing prevents long-span lines. Step C — Tune scoring so the “whole-structure” shaft wins If the script picks a small local channel instead of the macro channel: Increase insideWeight relative to touchWeight (macro channels tend to contain longer structure even with fewer perfect “touches”) Reduce widthPenalty, because macro channels may need to be wider to accommodate historical volatility Increase lookbackBars and evalBars to make “whole-structure fit” matter Step D — Drifts as secondary shafts Once main shaft is good: Increase Drifts per Direction Validate that drifts represent meaningful alternate sub-shafts rather than noisy duplicates. If drifts look too similar: This is expected if many candidates differ only slightly; future refinements should diversify drift selection (see “what still needs done”). Step E — Ore pockets interpretation Ore pockets indicate time confluence of multiple rails. Use them as: “Time windows to watch” Not as deterministic price levels Tune: clusterBars (cluster tightness) minClusterSize (signal strength) 6) What still needs done (explicit backlog) The macro “main mining shaft channel” spanning the entire market structure, and Smaller shafts/drifts nested inside the macro structure. To accomplish that, the current algorithm needs additional architecture. Concretely: A) True multi-scale / hierarchical discovery (primary missing feature) Right now: one pass, one lookback, one score objective. Still Needed: Macro pass: discover a primary shaft using a very long evaluation window and anchor set. Micro pass(es): discover drifts/secondary shafts using: residuals (distance from macro centerline), or segmented time windows (regime partitions), or anchor subsets constrained to local regions. This is the single biggest reason we are not consistently getting the full-structure shaft. B) Anchor retention strategy for macro detection Right now: anchors are FIFO capped and direction scanning uses “recent anchors only.” To reliably find 10-year shafts we need: an option to store/retain representative anchors across the entire history, not only the most recent ones. Examples of necessary improvements: “Stratified anchor sampling” across time (keep some old anchors even when maxAnchors is hit) “Macro anchor bank” (separate storage for pivots or major gaps) C) Candidate generation constraints must support macro lines If we want a shaft spanning the whole structure: maxSpacing must allow it the candidate pool must contain anchors far apart in time So the algorithm needs: better selection of anchor pairs for long-span candidates (e.g., include earliest/oldest anchors + newest anchors deliberately, not accidentally) D) Drift diversification Right now drifts are “next best by score,” which often yields near-duplicates. We want: “diverse” secondary shafts: enforce minimum angular difference, enforce minimum offset difference, or penalize candidates too similar to the already-selected shaft. E) Width fitting logic for macro channels Macro channels often require: either a higher width cap, or a different penalty profile. Current width penalty is simple and can bias against macro channels. Needed: width penalty that scales by timescale or by total evaluated bars, or separate macro/micro scoring. F) Ore pocket semantics enhancement (optional but aligned) Currently pockets are time intersections only. If you want “pocket zones,” improvements could include: projecting intersection price and drawing a zone box, clustering in (time, price) space instead of only time, adding “importance” weighting based on which lines intersect (macro line intersections weighted higher). 7) Known limitations (current version) Heavy compute only runs on last bar (good for performance), but means: changes in anchors/parameters can reselect rails abruptly Candidate set is bounded; macro shaft can be missed if not in pool Drift selection can be redundant Ore pockets are time clusters, not price clusters
Pine Script®指标
由Eyemaginative提供
EMA CORE ETH - coremarkets.tradeEMA CORE ETH is a trend-following system developed exclusively for Ethereum, tested and validated on perpetual futures contracts. It is calibrated to capture directional moves on the H4 timeframe and can also be used on M15, always respecting the asset’s trend structure. The script comes fully configured, with no technical adjustments required. How to use Apply only to ETH (perpetual futures) Use on H4 or M15 timeframes Trade only signals aligned with the trend Select only one risk management mode Risk Management Available modes: Passive Risk Management (No Stop Loss) Fixed Risk Management (Take Profit + Stop Loss) Conservative Trailing Stop Aggressive Trailing Stop Note: if more than one mode is selected, the system will apply only the first active mode. Targets Operates with up to 3 Take Profit levels (TP1 / TP2 / TP3), which can be enabled or disabled. Alerts Objective alerts notify entries, partial exits, and position closure, including position sizes, allowing manual or automated execution. Disclaimer Analytical and educational tool only. Not investment advice. Perpetual futures trading involves high risk.
Pine Script®策略
由CoreMarkets提供
EMA CORE BTC - coremarkets.tradeEMA CORE BTC is a trend-following system developed exclusively for Bitcoin, tested and validated on perpetual futures contracts, focused on medium- and long-term directional moves on H4 and Daily (D1) timeframes. The script comes fully configured, with no technical adjustments required. All logic, filters, and risk management were specifically calibrated for BTC behavior in the perpetual futures market. How to use Apply only to BTC (perpetual futures) Use exclusively on H4 or D1 timeframes Trade only signals aligned with the trend structure Select only one risk management mode Risk Management Available modes: Passive Risk Management (No Stop Loss) Fixed Risk Management (Take Profit + Stop Loss) Conservative Trailing Stop Aggressive Trailing Stop Note: if more than one risk management mode is selected, the system will apply only the first active mode, ignoring the others. Targets Operates with up to 3 Take Profit levels (TP1 / TP2 / TP3), which can be enabled or disabled according to the user’s strategy. Alerts Objective alerts notify entries, partial exits, and position closure, including opened, closed, and remaining quantities, enabling manual or automated execution. Disclaimer Analytical and educational tool only. Not investment advice. Perpetual futures trading involves high risk.
Pine Script®策略
由CoreMarkets提供
Yellow candleHeikin-Ashi Momentum Breakout (Yellow Candle Indicator) Overview: The Yellow Candle Indicator is a technical analysis tool designed to identify potential trend reversals or momentum shifts by combining Heikin-Ashi price action with a Simple Moving Average (SMA) and Rate of Change (ROC) filter. This script is specifically engineered to filter out market noise and highlight high-probability entry points when price action crosses its mean value under controlled volatility. Methodology: The script utilizes request.security to fetch data from a Heikin-Ashi candlestick perspective, regardless of the chart type you are using. It relies on three core conditions to plot a signal: 1. Mean Reversion Cross: It detects a crossover between the Heikin-Ashi Close and a short-term SMA. 2. Momentum Constraint: It uses the Rate of Change (ROC) to ensure the move isn't overextended. If the ROC is below the user-defined limit, it confirms a stable breakout. 3. Breakout Level: Once a "Yellow Candle" is identified, the script plots a horizontal breakout line based on the Heikin-Ashi High of that specific candle, serving as a dynamic resistance level. Key Features: • Heikin-Ashi Integration: Optimized for smoother trend identification. • Customizable Momentum Filter: Users can adjust the mom_limit to suit different market conditions. • Visual Breakout Lines: Automatically plots the breakout level for easier trade management. • Alert Ready: Includes a built-in alert condition for real-time notifications. Usage Tip: This indicator is best used on trending timeframes (15m, 1h, 4h). Traders often look for a candle close above the yellow line as a confirmation for a bullish continuation.
Pine Script®指标
由qshm2030提供
Adaptive Elliott Wave: Forecast + Dashboard (V.2)Title: Adaptive Elliott Wave: Forecast + Dashboard Description: Overview The Adaptive Elliott Wave: Forecast + Dashboard is a technical analysis tool designed to visualize potential Elliott Wave structures using a dynamic, multi-factor approach. Unlike static wave scripts, this indicator adapts its projections based on real-time trend context (Weighted Moving Averages) and momentum shifts (RSI). It is built to help traders identify the most likely path—Impulse or Correction—based on current market conditions. How It Works The script uses a combination of pivot-point detection and trend filtering to project future wave paths. Pivot Logic: The indicator identifies significant Highs and Lows using a sensitivity setting. These pivots form the "anchors" for the Elliott Wave count. Adaptive Engine: The "Auto-Detect" mode analyzes the relationship between the 50/200 WMA (Trend) and RSI (Momentum). In a Bull Trend: If RSI is oversold, the script anticipates a bullish "Impulse" wave. If RSI is overbought, it prepares for a "Correction." In a Bear Trend: The logic reverses to project rallies or downward impulses. Projections: It calculates Fibonacci-based targets for waves 1-5 (Impulse) or A-B-C/W-X-Y (Correction) and renders them as "ghost lines" that move with the price. Macro Outlook: For long-term context, the script includes a Macro Projection feature that uses higher-period pivots to show the possible 1-year direction. Key Features Target Table: A real-time dashboard showing exact Fibonacci target prices and the percentage distance from the current price. Corrective Channels: Automatically draws channels for wave corrections to help identify potential breakout or breakdown zones. Bullish/Bearish Extensions: Shows immediate volatility-based extensions beyond the last confirmed pivot. RSI Signals: Visual markers on the chart indicate overbought/oversold conditions that feed into the adaptive logic. How to Use Identify the Phase: Use the "AI STATUS" in the dashboard to see if the script is currently projecting an Impulse (Trend move) or a Correction (Counter-trend). Confirm with WMA: Use the 50 (Blue) and 200 (Orange) WMAs to confirm the macro trend before following a projection. Monitor Fib Targets: Watch for price reactions at the projected labels. If price breaks a target significantly, the wave count may need to be re-evaluated (re-pivot). Customize Sensitivity: For scalping, lower the "Short-Term Sensitivity." For swing trading, increase it. Disclaimer This script is for educational purposes only. Elliott Wave Theory is subjective, and projections are mathematical estimates based on historical volatility. Past performance does not guarantee future results. Always use proper risk management. Settings Guide Forecast Mode: Choose between "Auto-Detect" (Dynamic) or manually force an Impulse/Correction count. Macro Sensitivity: Controls how far back the script looks to generate the purple 1-year projection. Link Correction to Extension: A unique feature that starts the forecast from a potential extension target rather than the current live price.
Pine Script®指标
由TheTankTrades提供
Elliott Wave: Pro Forecast + Dashboard (with RSI Divergence)Elliott Wave: Pro Forecast + Dashboard (with RSI Divergence) This indicator provides a dynamic, real-time projection of Elliott Wave structures, helping traders identify potential trend exhaustion and reversal targets. By combining historical pivot analysis with Fibonacci extensions, it forecasts both short-term "extensions" and long-term "macro" moves. 🚀 Key Features Automated Elliott Wave Projections: Automatically plots potential 5-wave impulse moves (bullish) and 3-wave corrective moves (ABC - bearish) based on current market volatility. RSI Divergence Integration (⚡): The script scans for discrepancies between price and momentum. If a reversal is projected while a Bullish or Bearish divergence exists, a lightning bolt icon appears, signaling a high-probability setup. Dual-Horizon Forecasting: Short-Term Extension: Projects the immediate continuation of the current trend. 1-Year Macro Projection: A "Big Picture" mode that uses high-sensitivity pivots to forecast long-term structural shifts. Dynamic Data Dashboard: An on-chart table calculates exact Fibonacci price targets and the percentage distance from the current price, allowing for precise risk/reward planning. Invalidation Logic: Clearly marks the "Invalidation Line." If price breaches this level, the current wave count is considered void. 🛠️ How to Read the Chart Historical Waves (Green/Teal): Shows the confirmed pivots that the script is using as a baseline. Extensions (Orange): The immediate predicted path if the current momentum continues. Reversals (Blue): The projected Elliott Wave path if the current pivot holds. Look for the ⚡ symbol near the Invalidation line; this indicates RSI Divergence, suggesting the reversal has strong momentum backing it. Macro Projection (Purple): Designed for swing traders and investors to see where the asset could be in a year based on larger cycle pivots. ⚙️ Settings & Customization Sensitivity: Adjust the "Short-Term" and "Macro" sensitivity to filter out market noise or capture smaller intraday cycles. Scenario Linking: You can choose to have the Reversal projection start after the Extension target is hit, or have them run independently. Visual Toggles: Enable/Disable the target table, Fibonacci grid levels, and chart labels to keep your workspace clean. Disclaimer: This indicator is a mathematical projection based on historical volatility and Elliott Wave rules. It is a tool for technical analysis and does not guarantee future results. Always use proper stop-loss management.
Pine Script®指标
由TheTankTrades提供
[SpaghettiForex] LH - Level HeatmapLH — Level Heatmap is a context tool that builds a dynamic heatmap of price zones (support/resistance areas) and assigns each zone a strength score (0–100) based on how price interacts with it over time. LH does not predict the market and it is not a “magic levels” script. Its goal is to help you prioritise which zones are worth paying attention to, using simple, transparent rules. What it shows: - A set of horizontal zones (boxes) derived from objective sources (pivots, previous day levels, optional manual levels). - A strength score for each zone (visualised via colour/opacity). - Optional zone labels (“LH xx”) and alerts for touches and confirmed reactions. ________________________________________ Screenshots (examples): Screenshot 1 — Heatmap overview (multiple zones) A full overview showing how LH builds and extends zones to the right. Stronger zones appear with clearer colouring/visibility, weaker zones fade. Screenshot 2 — Strong zone touch Example of price entering a strong zone (high strength score). LH highlights nearby zones and displays a strength score (0–100). Higher scores indicate zones with more meaningful interactions over time. Useful to illustrate how repeated interactions can increase the zone’s relevance over time. Screenshot 3 — Reaction confirmation (strong zone) Example of a confirmed reaction after a touch (price moves away by a minimum ATR distance within a limited number of bars). After a zone touch, LH can confirm a reaction when price moves away by a minimum ATR distance within a limited number of bars. This is a context metric, not a trade entry signal. ________________________________________ HOW ZONES ARE CREATED LH can build zones from: - Pivot High / Pivot Low (swing points detected using left/right pivot settings) - Previous Day High/Low (optional) - Manual levels (CSV): comma-separated price levels (optional) Each level becomes a zone whose thickness is based on ATR: - Fixed at creation: the zone thickness is locked when created - Dynamic with ATR: thickness adapts as ATR changes Close levels can be merged to avoid clutter using a minimum separation rule (ATR-based). HOW STRENGTH IS CALCULATED (0–100) Each zone strength is a weighted mix of three components: 1. Touches - How many times price enters the zone (with an optional cooldown to avoid overcounting). 2. Reactions - A “reaction” is counted when, after a touch, price moves away from the touch price by at least a defined ATR distance within a fixed number of bars. 3. Cleanliness (touch quality) - A simple proxy that rewards cleaner touches (based on wick/body dominance), to reduce noise from messy interactions. All components are normalised and combined into a final strength score (0–100). The colour/opacity of each zone reflects this score. Display modes: - All Zones: shows every stored zone - Only Nearest Zones: shows only the N closest zones to current price (useful to keep charts clean). ALERTS LH includes optional alerts (bar-close confirmed) for: - Price entering a strong zone. - A strong-zone reaction being confirmed. - Price entering any visible zone (optional). Alerts include zone strength and centre level via hidden plot values. Important note: LH is a context and prioritisation tool. It does not provide financial advice or performance guarantees. Zones are derived from pivots and session levels, so they reflect structure after it forms (pivot logic inherently requires confirmation). Always use LH alongside your broader process and risk management.
Pine Script®指标
由SpaghettiForex提供
BTCMikee EMA + MACD Cross w/ Optional RSI+ADX Filters📊 EMA + MACD Cross Strategy (Clean, Filtered) This strategy is built around high-probability trend shifts using a dual confirmation system: EMA cross + MACD cross in the same direction, on a confirmed bar. The goal is simple — reduce noise, avoid chop, and only act when momentum and trend agree. 🔹 Core Logic Fast EMA vs Slow EMA crossover defines the trend shift MACD line vs signal line crossover confirms momentum Trades only trigger when both crosses happen together 🔹 Optional Filters (User-Controlled) RSI filter to avoid overextended entries ADX filter to ensure sufficient trend strength Session filter to restrict trading to specific market hours Directional control (Long only, Short only, or Both) 🔹 Risk-Aware Design Entries occur only on confirmed candles (no repaint behavior) One position at a time (no pyramiding) Clean logic — no forced exits, TP/SL, or curve-fitting 🔹 Visual Aids Adjustable Fast & Slow EMAs (signal drivers) Optional additional EMAs (50 / 200 by default) for trend context Clear BUY / SELL markers on valid signals 🔹 Best Use Case Designed for: Futures (ES, NQ, GC) Index CFDs High-liquidity stocks & crypto Works best on 5m–30m timeframes where momentum confirmation matters.
Pine Script®策略
由BTCMikee提供
Daily Move Percentile + StdDevDaily Move Percentile + Standard Deviation Quantifies how unusual today's price move is relative to historical norms, combining percentile ranking with standard deviation analysis. Designed for volatile assets like biotech where contextualizing moves against typical volatility is essential. How it works: Calculates daily percentage change Ranks today's move against the historical distribution (percentile) Measures how many standard deviations from the mean (z-score) Displays average volatility so you can contextualize whether a move is normal for this specific stock Color coding: Teal: 95th+ percentile up move — rare upside Red: 95th+ percentile down move — rare downside Lime: 80th-95th percentile up move — notable upside Orange: 80th-95th percentile down move — notable downside Gray: Normal volatility — nothing unusual Information table (top right): Today's move (%) Percentile rank (how unusual) Standard deviations (z-score) Average volatility (typical daily move for this stock) 1 Std Dev (baseline volatility measure) Use cases: Identify statistically significant moves worth investigating Contextualize moves against stock-specific volatility (a -5% day means different things for different stocks) Spot potential mean-reversion setups after extreme moves Monitor portfolio names for unusual activity Recommended settings: 30-60 day lookback for volatile biotech 252 day lookback for stable, large-cap names
Pine Script®指标
由AlchemistInvestor提供